Sources of M_w 5+ earthquakes in northeastern Italy and western Slovenia: An updated view based on geological and seismological evidence     

Pierfrancesco Burrato  Maria Eliana Poli  Paola Vannoli  Adriano Zanferrari  Roberto Basili  Fabrizio Galadini 《Tectonophysics》2008,453(1-4):157

We present an overview of the seismogenic sources of northeastern Italy and western Slovenia, included in the last version of the Database of Individual Seismogenic Sources (DISS 3.0.2) and a new definition of the geometry of the Montello Source that will be included in the next release of the database. The seismogenic sources included in DISS are active faults capable of generating M_w > 5.5 earthquakes. We describe the method and the data used for their identification and characterization, discuss some implications for the seismic hazard and underline controversial points and open issues.In the Veneto–Friuli area (NE Italy), destructive earthquakes up to M_w 6.6 are generated by thrust faulting along N-dipping structures of the Eastern Southalpine Chain. Thrusting along the mountain front responds to about 2 mm/a of regional convergence, and it is associated with growing anticlines, tilted and uplifted Quaternary palaeolandsurfaces and forced drainage anomalies. In western Slovenia, dextral strike–slip faulting along the NW–SE trending structures of the Idrija Fault System dominates the seismic release. Activity and style of faulting are defined by recent earthquakes (e.g. the M_s 5.7, 1998 Bovec–Krn Mt. and the M_w 5.2, 2004 Kobarid earthquakes), while the related recent morphotectonic imprint is still a debated matter.We reinterpreted a large set of tectonic data and developed a segmentation model for the outermost Eastern Southalpine Chain thrust front. We also proposed the association of the four major shocks of the 1976 Friuli earthquake sequence with individual segments of three major thrust fronts. Although several sub-parallel active strike–slip strands exist in western Slovenia, we were able to positively identify only two segments of the Idrija Fault System. A comparison of the regional GPS velocity with long-term geological slip-rates of the seismogenic sources included in DISS shows that from a quarter to half of the deformation is absorbed along the external alignment of thrust faults in Veneto and western Friuli. The partitioning of the deformation in western Slovenia among the different strike–slip strands could not be quantified.  相似文献   

Pressure dependence of structural parameters of paragonite     

Paola Comodi  Pier Francesco Zanazzi 《Physics and Chemistry of Minerals》1997,24(4):274-280

The compressibility and structure of a 2M₁ paragonite with composition [Na_0.88K_0.10Ca_0.01Ba_0.01] [Al_1.97Ti_0.007Fe_0.01Mn_0.002Mg_0.006]Si_3.01Al_0.99O₁₀OH₂ were determined at pressures between 1 bar and 41 kbar, by single crystal X-ray diffraction using a Merrill-Bassett diamond anvil cell. Compressibility turned out to be largely anisotropic, linear compressibility coefficients parallel to the unit cell edges being β_a=3.5(1)·10^?4, β_b=3.6(1)·10^?4, β_c=8.3(3)·10^?4 kbar^?1 (β_a:β_b·β_c=1:1028:2.371). The isothermal bulk modulus, calculated as the reciprocal of the mean compressibility of the cell volume, was 650(20) kbar. The main features of the deformation mechanism resulting from structural refinements at pressures of 0.5, 25.4, 40.5 kbar were: –?variation in sheet thickness, showing that compression of the c parameter was mainly due to the interlayer thickness reduction from 3.07 Å at 0.5 kbar to 2.81 Å at 40.5 kbar; –?the compressibility of octahedra was greater than that of tetrahedra, the dimensional misfit between tetrahedral and octahedral sheets increased with P, so that tetrahedral rotation angel α increased from 15° at 0.5 kbar to 21.6° at 40.5 kbar; –?the basal surface corrugation (Δz) of the tetrahedral layer, due to the different dimensions of M1 and M2 octahedra and to the octahedral distortion, decreased with P (Δz=0.19 and 0.12 Å at 0.5 and 40.5 kbar respectively). Comparison of the new data on paragonite with those of a K-muscovite and a Na-rich muscovite (Comodi and Zanazzi 1995) revealed a clear trend toward decreasing of compressibility when Na substitutes for K atoms in the interlayer sites.  相似文献   

An Innovative Approach to Meteorite Analysis by Laser‐Induced Breakdown Spectroscopy          下载免费PDF全文

Giorgio S. Senesi  Gioacchino Tempesta  Paola Manzari  Giovanna Agrosì 《Geostandards and Geoanalytical Research》2016,40(4):533-541

An innovative approach of double pulse laser‐induced breakdown spectroscopy (DP‐LIBS) coupled with optical microscopy was applied to the characterisation and quantitative analysis of the Agoudal iron meteorite in bulk sample and in petrographic thin section. Qualitative analysis identified the elements Ca, Co, Fe, Ga, Li and Ni in the thin section and the whole meteorite. Two different methods, calibration‐free LIBS and one‐point calibration LIBS, were used as complementary methodologies for quantitative LIBS analysis. The elemental composition data obtained by LIBS were in good agreement with the compositional analyses obtained by traditional methods generally applied for the analysis of meteorites, such as ICP‐MS and EDS‐SEM. Besides the recognised advantages of LIBS over traditional techniques, including versatility, minimal destructivity, lack of waste production, low operating costs, rapidity of analysis, availability of transportable or portable systems, etc., additional advantages of this technique in the analysis of meteorites are precision and accuracy, sensitivity to low atomic number elements such as Li and the capacity to detect and quantify Co contents that cannot be obtained by EDS‐SEM.  相似文献   

Introduction     

Paola Malanotte-Rizzoli  Allan R. Robinson 《Deep Sea Research Part II: Topical Studies in Oceanography》1993,40(6)

  相似文献   

Magnesiochloritoid: Compressibility and high pressure structure refinement     

Paola Comodi  Marcello Mellini  Pier Francesco Zanazzi 《Physics and Chemistry of Minerals》1992,18(8):483-490

The response of magnesiochloritoid to pressure has been studied by single crystal X-ray diffraction in a diamond anvil cell, using crystals with composition Mg_1.3Fe_0.7Al₄Si₂O₁₀(OH)₄. The unit cell parameters decrease from a = 9.434 (3), b = 5.452 (2), c = 18.136 (5) Å, β = 101.42° (2) (1 bar pressure) to a = 9.370 (7), b = 5.419 (5), c = 17.88 (1) Å, β = 101.5° (1) (42 kbar pressure), following a slightly anisotropic compression pattern (linear compressibilities parallel to unit cell edges: β _a = 1.85, β _b = 1.74, β_c = 3.05 × 10^?4 kbar^?1) with a bulk modulus of 1480 kbar. Perpendicular to c, the most compressible direction, the crystal structure (space group C2/c) consists of two kinds of alternating octahedral layers connected via isolated SiO₄ tetrahedra. With increasing pressure the slightly wavy layer [Mg_1.3Fe_0.7AlO₂(OH)₄] tends to flatten. Furthermore, the octahedra in this layer, with all cations underbonded, are more compressible than the octahedra in the (A1₃O₈) layer with slightly overbonded aluminum. Comparison between high-pressure and high-temperature data yields the following equations: $$\begin{gathered} a_{P,T} = 9.434{\text{ }}{\AA} - 174 \cdot 10^{ - 5} {\text{ }}{\AA}{\text{kb}}^{{\text{ - 1}}} \cdot P \hfill \\ {\text{ }} + 9 \cdot 10^{ - 5} {\text{ }}{\AA}^\circ C^{ - 1} \cdot (T - 25^\circ C) \hfill \\ b_{P,T} = 5.452{\text{ }}{\AA} - 95 \cdot 10^{ - 5} {\text{ }}{\AA}{\text{kb}}^{{\text{ - 1}}} \cdot P \hfill \\ {\text{ }} + 5 \cdot 65 \cdot 10^{ - 5} {\text{ }}{\AA}^\circ C^{ - 1} \cdot (T - 25^\circ C) \hfill \\ c_{P,T} = 18.136{\text{ }}{\AA} - 549 \cdot 10^{ - 5} {\text{ }}{\AA}{\text{kb}}^{{\text{ - 1}}} \cdot P \hfill \\ {\text{ }} + 16 \cdot 2^{ - 5} {\text{ }}{\AA}^\circ C^{ - 1} \cdot (T - 25^\circ C) \hfill \\ \end{gathered} $$ with P in kbar and T in °C. These equations indicate that the unit cell and bond geometry of magnesiochloritoid at formation conditions do not differ greatly from those at the outcrop conditions, e.g. the calculated unitcell volume is 917.3 ų at P = 16 kbar and T=500 °C, whereas the observed volume at room conditions is 914.4 ų. In addition, they show that the specific gravity increases from formation at depth to outcrop at surface conditions.  相似文献   

Coastal uplift rate at Matanzas (Cuba) inferred from MIS5e phreatic overgrowths on speleothems          下载免费PDF全文

Jo De Waele  Ilenia M. D'Angeli  Nicola Tisato  Paola Tuccimei  Michele Soligo  Joaquín Ginés  Angel Ginés  Joan J. Fornós  Igor M. Villa  Esteban R. Grau González  Stefano M. Bernasconi  Tomaso R. R. Bontognali 《地学学报》2017,29(2):98-105

Many morphological elements in Cuba's landscape (e.g. marine terraces, tidal notches) demonstrate that coastal uplift has taken place, but the rate at which this occurs is not known. Carbonate phreatic overgrowths on speleothems have been found in a cave in Central North Cuba, ~1 km from the present coastline at 16 m asl. They form exceptional and unique mushroom‐shaped speleothems and balconies decorating the walls of the rooms. These phreatic overgrowths on speleothems (POS) formed at the oscillating air–water interface in sea‐level controlled anchialine lakes. U/Th dating of these overgrowths suggests ages that are compatible with the Marine Isotope Stage 5e (i.e. 130–115 ka). These POS have fixed this sea‐level highstand and demonstrate that this part of Cuba has been subjected to a much lower uplift rate than previously reported, that is, less than 0.1 mm/year since the last interglacial.  相似文献   

Reply to comment on ‘Insights from the Mw 6.3 2009 L’Aquila earthquake (Central Apennines) – unveiling new seismogenic sources through their surface signatures: the adjacent San Pio Fault’     

Daniela Di Bucci  Paola Vannoli  Pierfrancesco Burrato  Umberto Fracassi  Gianluca Valensise 《地学学报》2011,23(6):421-423

  相似文献   

Diel microbial variations at a coastal Northern Adriatic station affected by Po River outflows     

Mauro Celussi  Alessandro Paoli  Fabrizio Bernardi Aubry  Mauro Bastianini  Paola Del Negro 《Estuarine, Coastal and Shelf Science》2008

Diel sampling was performed during an early spring survey in the Northern Adriatic Sea at a coastal station off the Po River delta. Samples were taken every 6 h at spring tide maxima and minima in the sub-superficial layer, at the maximum fluorescence depth (∼3 m). Variations in microbial community structure and its processes were assessed by considering heterotrophic bacteria, picocyanobacteria, viruses, exoenzymatic activities, microphytoplankton, nanoplankton and bacterial/cyanobacterial Denaturing Gradient Gel Electrophoresis (DGGE) profiles. A considerable diatom bloom, mostly supported by Skeletonema marinoi was detected. All microbial parameters except viruses, showed a sinusoidal trend with a 12 h period; only picocyanobacteria expressed relative maxima during high tide, showing a phase in opposition to the other parameters. No substantial changes in DGGE band patterns were detected. Even though the results showed bacterial activities to be influenced by the phytoplankton bloom, all microbial parameters' diel trends (except viruses) preferentially followed the tidal fluctuation rather than the light:dark cycle.  相似文献   

Distribution and population structure of the fish Helicolenus dactylopterus dactylopterus (Delaroche, 1809) in the Central Mediterranean (Southern Tyrrhenian Sea)     

Laura Pirrera  Teresa Bottari  Barbara Busalacchi  Daniela Giordano  Larissa Modica  Anna Perdichizzi  Francesco Perdichizzi  Adriana Profeta  & Paola Rinelli 《Marine Ecology》2009,30(S1):161-174

  相似文献   

Hydrothermal dolomitization in platform and basin carbonate successions during thrusting: A hydrocarbon reservoir analogue (Mesozoic of Venetian Southern Alps,Italy)     

Paola Ronchi  Daniele Masetti  Stefano Tassan  Davide Camocino 《Marine and Petroleum Geology》2012,29(1):68-89

The Early Jurassic dolomitized carbonates in the Venetian Alp, represent a surface analogue of the hydrocarbon exploration targets in Adriatic offshore and Po Plain, Italy. Dolomitization affected the carbonate platform of Monte Zugna Formation (Lower Jurassic) and the Neptunian dikes breccia in the pelagic Maiolica Formation (Uppermost Jurassic–Lower Cretaceous) improving the poro-perm characteristics. Petrography, stable isotope, strontium isotope ratio, trace element and fluid inclusion analyses were carried out on samples from the Monte Grappa Anticline, which is the direct analogue for subsurface. The petrographic analyses showed a first pervasive, replacement dolomitization phase (D1) followed by volumetrically less important dolomite cement precipitation phases (D2, D3, DS). The same, quite wide range of oxygen isotope (?9 to ?2‰ V-PDB) is observed in all dolomite types. The δ¹³C range is in the positive field of marine derived carbonate (from +0.5 to +3.2‰ PDB). The trace element analysis showed a slight enrichment in Fe and Mn contents in the Monte Zugna dolostones with respect the original limestone. The same dolomite precipitation temperature (up to 105 °C Th) was observed in the replacement and cement dolomites, suggesting a unique dolomitization event. This temperature, largely higher than the maximum burial temperature (about 50 °C), supports a hydrothermal origin of the dolomitizing fluids, which had a seawater to brackish composition. The data collected suggest a hydrothermal dolomitization occurring during to the South Alpine thrusting according to the “squeegee model”. The interpretation is consistent with the dolomitization model proposed for similar Jurassic successions in the Central Southern Alps. This study indicates that the deformed foreland and thrust fold belts carbonates in Po Plain and Adriatic offshore are suitable to be dolomitized, and therefore reflect an efficient hydrocarbon exploration play.  相似文献