排序方式： 共有40条查询结果，搜索用时 187 毫秒
11.
Probabilistic seismic hazard of Pakistan, Azad-Jammu and Kashmir 总被引：2，自引：2，他引：0
The seismic hazard study for Pakistan and Azad Jammu and Kashmir has been conducted by using probabilistic approach in terms
of peak ground acceleration (PGA) in m/s2 and also seismic hazard response spectra for different cities. A new version of Ambraseys et al. (Bull Earthq Eng 3:1–53,
2005) ground acceleration model is used, and parameterization is based on most recent updated earthquake catalogs that consisted
of 14,000 events. The threshold magnitude was fixed at M
w 4.8, but seismic zones like northern Pakistan–Tajikistan, Hindukush and northern Afghanistan–Tajikistan border had M
w 5.2. The average normalized ‘a’ and ‘b’ values for all zones are 6.15 and 0.95, respectively. Seismicity of study area was modeled, and ground motion was computed
for eight frequencies (0.025, 0.1, 0.2, 0.5, 1.0, 1.5, 2.0, 2.5 s) for different annual exceedance rates of 0.02, 0.01, 0.005,
0.002 and 0.001 (return periods 50, 100, 200, 500 and 1,000 years) for stiff rocks at the gridding of 0.1° × 0.1°. Seismic
hazard maps based on computed PGA for 0.02, 0.01 and 0.002 annual exceedance are prepared. These maps indicate the earthquake
hazard of Pakistan and surrounding areas in the form of acceleration contour lines, which are in agreement with geological
and seismotectonic characteristics of the study area. The maximum seismic hazard values are found at Muzaffarabad, Gilgit
and Quetta areas. 相似文献
12.
O. Bartoli L. Tajčmanová B. Cesare A. Acosta‐Vigil 《Journal of Metamorphic Geology》2013,31(7):775-789
Stromatic metatexites occurring structurally below the contact with the Ronda peridotite (Ojén nappe, Betic Cordillera, S Spain) are characterized by the mineral assemblage Qtz+Pl+Kfs+Bt+Sil+Grt+Ap+Gr+Ilm. Garnet occurs in low modal amount (2–5 vol.%). Very rare muscovite is present as armoured inclusions, indicating prograde exhaustion. Microstructural evidence of melting in the migmatites includes pseudomorphs after melt films and nanogranite and glassy inclusions hosted in garnet cores. The latter microstructure demonstrates that garnet crystallized in the presence of melt. Re‐melted nanogranites and preserved glassy inclusions show leucogranitic compositions. Phase equilibria modelling of the stromatic migmatite in the MnO–Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2–O2–C (MnNCaKFMASHOC) system with graphite‐saturated fluid shows P–T conditions of equilibration of 4.5–5 kbar, 660–700 °C. These results are consistent with the complete experimental re‐melting of nanogranites at 700 °C and indicate that nanogranites represent the anatectic melt generated immediately after entering supersolidus conditions. The P–T estimate for garnet and melt development does not, however, overlap with the low‐temperature tip of the pure melt field in the phase diagram calculated for the composition of preserved glassy inclusions in garnet in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O (NCKFMASH) system. A comparison of measured melt compositions formed immediately beyond the solidus with results of phase equilibria modelling points to the systematic underestimation of FeO, MgO and CaO in the calculated melt. These discrepancies are present also when calculated melts are compared with low‐T natural and experimental melts from the literature. Under such conditions, the available melt model does not perform well. Given the presence of melt inclusions in garnet cores and the P–T estimates for their formation, we argue that small amounts (<5 vol.%) of peritectic garnet may grow at low temperatures (≤700 °C), as a result of continuous melting reactions consuming biotite. 相似文献
13.
14.
15.
Stanislav Ulrich Ji?�� Konop��sek Petr Je?��bek Lucie Taj?manov�� 《International Journal of Earth Sciences》2011,100(2-3):415-429
Three structural profiles across the Coastal Terrane, the Boundary Igneous Complex and the Orogen Core have been studied in the Kaoko Belt of northwestern Namibia. The oldest known Si fabric is inherited from an older tectono-metamorphic event. It occurs in the Coastal Terrane only and the extent of its reworking increases from south to north. The S1 foliation reactivates or folds Si fabric in the Coastal Terrane and appears as an early planar fabric in granitoids of the Boundary Igneous Complex and migmatites of the Orogen Core domain. Superimposed subvertical S2 fabric corresponds to axial plane cleavage of upright close to isoclinal folds and the extent of its development also increases from south to north. Active migration of partial melt during S2 development in the Orogen Core dates the onset of this deformation at ~550?Ma. Distribution of F2 fold axes and L2 stretching lineations suggests pure shear?Cdominated deformation associated with development of N?CS trending S2 cleavage preserved in the central profile, followed by sinistral simple shear?Cdominated deformation on newly developed NW?CSE trending pervasive cleavage in the northern part of the area. Such spatial variation in the deformation record is attributed to the irregular shape of the Congo Craton indenter that is reflected by heterogeneous development of the S2 cleavage front in the Coastal Terrane and the Boundary Igneous Complex. Common orientation of L1 and L2 stretching lineations and solid-state reworking on both S1 and S2 planes suggest single event of sinistral transpression since 550?Ma with strain partitioning into domains of oblique thrusting (reactivated S1) and transcurrent sinistral shearing (S2 and S3). Such succession of deformation structures suggests that major subvertical shear zones in the Kaoko Belt do not correspond to early crustal discontinuities, but rather reflect late strain localization during cooling. 相似文献
16.
R. J. Taj 《Arabian Journal of Geosciences》2013,6(4):1011-1031
The studied carbonates are present within the middle part of the Tertiary siliciclastic dominated succession in Haddat Ash Sham area. This succession consists of conglomerates, sandstones, siltstones, mudstones, and ironstones arranged in upward coarsening and fining cycles of intermittent depositional environments ranging from fluvial coastal plain to shallow marine. The carbonates represent deposition in slightly restricted depositional environments during periods of very low clastic input. The studied two carbonate sections show a pronounced lateral and vertical changes from predominantly dolostones in the west to mixed dolostones and limestones in the east. Both sections began by egg yellow dolomitic lime mudstones and fine crystalline dolomite which indicate the formation of dolomite by late depositional to early diagenetic recrystallization of precursor Fe and Mg lime mud. During this time period, the western part of the study area continues in the deposition of Fe and Mg lime mud in slightly restricted depositional environments and formation of interbedded fine and coarse crystalline dolostones in coarsening-upward cycles. In the eastern part, the depositional environments become deeper and more circulated with short-lived periods of fluctuation in sea level and hence the deposition of foraminiferal wackestone, bioclastic packstones, and bioclastic rudstone in coarsening and shallowing-upward cycles. Both the western and eastern parts of the study area are terminated by characteristic yellow coarse crystalline phosphatic dolomite which indicate ultimate stages of shoaling and increasing the level and concentration of phosphorous in the restricted water and hence the formation of in situ and reworked phosphatic components. The diagenetic processes affected the dolostones and limestones microfacies associations include: dolomitization of Fe and Mg-rich lime mud, hematitization, calcitization, gypsification, and phosphatization of dolomite. Neophormation and recrystallization of micritic matrix and micritic intraclasts as well as shell fragments are the main diagenetic processes affected the limestones. 相似文献
17.
Biosolids from the Cañeveralejo WWTP were dehydrated by filter press and then applied two processes to reduce pathogens (PRP): thermally dried biosolid (TDB) and alkalinized biosolid (AB). Untreated, dehydrated biosolid (DB) was used as a control. We evaluated the impact of thermal drying and alkaline treatments on nitrogen mineralization in these substrates. Moreover, agronomic rates for biosolid applications to sugarcane were estimated for each of the treatments leading to application rates of 35.8, 36.4, and 54.5 t/ha for DB, TDB, and AB, respectively, to meet the nitrogen requirement (200 kg N/ha) for sugarcane cultivation (Saccharum officinarum). The results showed that the biosolid rates used increased the mineral nitrogen content of soils by an average of 93.8 and 439.8 mg/kg for all biosolids and the PRP (thermal drying and alkaline treatment) in biosolids had significant effects on mineralization rate, showing better results for the TDBs. 相似文献
18.
Lucie?Taj?manováEmail author Rainer?Abart Richard?Wirth Gerlinde?Habler Dieter?Rhede 《Contributions to Mineralogy and Petrology》2012,164(4):715-729
Samples of essentially “dry” high-pressure felsic granulites from the Bohemian Massif (Variscan belt of Central Europe) contain up to 2-mm-large perthitic alkali feldspars with several generations of plagioclase precipitates in an orthoclase-rich host. The first generation takes the form of lenses homogeneous in size, whereas the size of a second generation of very thin albite-rich precipitates is more variable with comparatively high aspect ratios. In the vicinity of large kyanite, garnet or quartz inclusions, the first generation of plagioclase precipitates is significantly less abundant, the microstructure is coarser than in the remainder of the perthitic grain and the host is a tweed orthoclase. The first generation of precipitates formed at around 850 °C during the high-pressure stage (16–18 kbar) of metamorphism. Primary exsolution was followed by primary coarsening of the plagioclase precipitates, which still took place at high temperatures (850–700 °C). The coarsening was pronounced due to the access of fluids in the outer portions of the perthitic alkali feldspar and in more internal regions around large inclusions. The second generation of albite-rich precipitates was formed at around 570 °C. TEM investigations revealed that the interfaces between the second-generation plagioclase lamellae and the orthoclase-rich host are coherent or semi-coherent. During late evolutionary stages of the perthite, albite linings were formed at phase boundaries, and the perthitic microstructure was partially replaced by irregularly shaped precipitates of pure albite with incoherent interfaces. The albitization occurred below 400 °C and was linked to fluid infiltration in the course of deuteric alteration. Based on size-distribution analysis, it is inferred that the precipitates of the first generation were most probably formed by spinodal decomposition, whereas the precipitates of the second generation rather were formed by nucleation and growth. 相似文献
19.
Rafi Yasmin Taj Sahaderan Renganathan Nagarajan Partha Gurunathan Baskar Manikom Velan 《洁净——土壤、空气、水》2009,37(10):787-792
In the present work, biosorption of Cr(VI) by Nymphaea rubra was investigated in batch studies. Batch experiments were conducted to study the effect of initial sorbent dosage, solution pH and initial Cr(VI) concentration. The results showed that the equilibrium uptake capacity was increased with decrease in biomass dosage. The Cr(VI) removal was influenced by the initial chromium compound concentration. Langmuir and Freundlich adsorption isotherm models were used to represent the equilibrium data. The Freundlich isotherm model was fitted very well with the equilibrium data when compared to Langmuir isotherm model. The sorption results were analyzed for pseudo‐first order and pseudo‐second order kinetic model. It was observed that the kinetic data fitted very well with the pseudo‐second order rate equation when compared to the pseudo‐first order rate equation. Fourier transform infrared spectrum showed the presence of different functional groups in the biomass. The surface morphology of the sorbent was exemplified by SEM analysis. Aquatic weeds seem to be a promising biosorbent for the removal of chromium ions from water environment. This paper reports the research findings of a laboratory‐based study on the removal of Cr(VI) from the synthetic solution using the dried stem of N. rubra as a biosorbent. 相似文献
20.
Seismic hazard assessment for Quetta is carried out using probabilistic seismic hazard analysis technique based on area sources and augmented by line source used for the first time in Pakistan. Seismic data has been collected and analyzed in spatial and temporal domains. Five Seismic Zones have been modeled in line with tectonics of the region with b-value of 1.14 using regression. The b-value is slightly higher, which is attributed to the fact that aftershocks were not removed as it distorted the dataset. Five fault sources are modeled, with three as reverse and two as strike-slip with 7.8 as maximum magnitude. Mach Structure is included in the tectonics for the first time. The attenuation relation used in the present study is recommended by various researchers. The expected Peak Ground Acceleration for 500-year return period is 4.79 m/s2 for rock outcrop and characterized as very high. Furthermore, variation in spectral acceleration within Quetta city is observed, for which spectral curves are developed for four different places. 相似文献