Hydro-climatic hazards for crops and cropping system in the chars of the Jamuna River and potential adaptation options     

M. Shahjahan Mondal  M. Aminur Rahman  Nandan Mukherjee  Hamidul Huq  Rezaur Rahman 《Natural Hazards》2015,76(3):1431-1455

  相似文献   

Combination of FeGAC/H<Subscript>2</Subscript>O<Subscript>2</Subscript> advanced oxidation process and sequencing batch reactor for treatment pesticide wastewater     

Augustine Chioma Affam  Malay Chaudhuri  Shamsul Rahman M. Kutty  Khalida Muda 《Environmental Earth Sciences》2016,75(4):349

  相似文献   

Mineralogy and chemical composition of the clay fraction of Neogene shales from the Surma Group in the Bengal basin,Bangladesh     

M. Julleh Jalalur Rahman  Rumana Yeasmin  Tom McCann 《Journal of the Geological Society of India》2016,88(6):705-710

Mineralogical and chemical investigations (<2μm clay separates) of shale samples from the Neogene-age Surma Group obtained from four wells (Habiganj-11, Shahbazpur-1, Titas-11, Titas-15) in the Bengal basin, Bangladesh, were carried out in order to reveal the clay mineral composition as reservoir exploration and exploitation requires a good understanding of the clay minerals. The samples were analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM) and X-Ray fluorescence spectrometry (XRF). Mineralogically, the sub-surface Surma Group shales comprise predominantly quartz, plagioclase, illite, chlorite, kaolinite, with lesser amounts of K-feldspar, dolomite and smectite, and minor to trace amounts of calcite, siderite and pyrite. The chemical composition of the <2 μm clay separates also suggests an illite and chlorite-rich composition. With increasing burial depth, the Surma Group shales are enriched in illite. The gradual decreasing of the smectite clays with depth and ultimate disappearance at greater depths (≥ 3000 m) may have been responsible for the presence of the diagenetic illite. Based on the mineralogical composition it is most likely that the illite-chlorite associations together with quartz and feldspar were predominantly detrital in origin and thus reflect the presence of a rapidly-rising source terrain not subjected to intense weathering.  相似文献   

Development of Tide–Surge Interaction Model for the Coastal Region of Bangladesh     

Gour Chandra Paul  Ahmad Izani Md. Ismail  Azizur Rahman  Md. Fazlul Karim  Ashabul Hoque 《Estuaries and Coasts》2016,39(6):1582-1599

In this paper, a two-dimensional, vertically integrated hydrodynamic model is developed taking into account entrained air bubbles during storm surges as well as incorporating inverted barometer, and river and land dynamics. The model is specifically designed for the coastal region of Bangladesh. A nested scheme method with a fine mesh scheme (FMS), capable of incorporating the complex coastline and all major offshore islands accurately, nested into a coarse mesh scheme (CMS) covering up to 15° N latitude in the Bay of Bengal is used. To incorporate the small and big offshore islands in the Meghna estuarine region with its complex coastline accurately, a very fine mesh scheme (VFMS) is again nested into the FMS. Along the northeast corner of the VFMS, the Meghna river discharge is taken into account. The coastal and island boundaries are approximated through proper stair steps. The model equations are solved by a semi-implicit finite difference technique using a staggered C-grid. A stable appropriate tidal condition over the model domain is generated by applying tidal forcing with the four major tidal constituents M ₂, S ₂, K ₁, and O ₁ along the southern open boundary of the CMS. This tidal regime is introduced as the initial state of the sea for nonlinear interaction of tide and surge. The model is applied to simulate water levels due to the interaction of tide and surge associated with the cyclones April 1991 and Aila at different coastal and island locations along the coast of Bangladesh. The results are found to be quite satisfactory with root mean square error of ～0.50 m as calculated for both the storm events. Tests of sensitivities on water levels are carried out for air bubbles, offshore islands, river discharge, inverse barometer, and grid resolution. The presence of air bubbles increases simulated water levels a little bit in our model, and the contribution of air bubbles in increasing water level is found around 2 %. Further, water levels are found to be influenced by offshore islands, river discharge, inverse barometer as well as grid resolution.  相似文献   

Meteorological drought in Bangladesh: assessing,analysing and hazard mapping using SPI,GIS and monthly rainfall data     

Md. Rejaur Rahman  Habibah Lateh 《Environmental Earth Sciences》2016,75(12):1026

  相似文献   

Modeling the Population Effects of Hypoxia on Atlantic Croaker (<Emphasis Type="Italic">Micropogonias undulatus</Emphasis>) in the Northwestern Gulf of Mexico: Part 1—Model Description and Idealized Hypoxia     

Kenneth A. Rose  Sean Creekmore  Peter Thomas  J. Kevin Craig  Md Saydur Rahman  Rachael Miller Neilan 《Estuaries and Coasts》2018,41(1):233-254

We developed a spatially explicit, individual-based model to analyze how hypoxia effects on reproduction, growth, and mortality of Atlantic croaker in the northwestern Gulf of Mexico lead to population-level responses. The model follows the hourly growth, mortality, reproduction, and movement of individuals on a 300 × 800 spatial grid of 1-km² cells for 140 years. Chlorophyll-a concentration, water temperature, and dissolved oxygen (DO) were specified daily for each grid cell and repeated for each year of the simulation. A bioenergetics model was used to represent growth, mortality was assumed stage- and age-dependent, and the movement behavior of juveniles and adults was modeled based on temperature and avoidance of low DO. Hypoxia effects were imposed using exposure effect submodels that converted time-varying exposures to low DO to reduced hourly growth, increased hourly mortality, and reduced annual fecundity. Results showed that 100 years of either mild or intermediate hypoxia produced small reductions in population abundance, while repeated severe hypoxia caused a 19% reduction in long-term population abundance. Relatively few individuals were exposed to low DO each hour, but many individuals experienced some exposure. The response was dominated by a 5% average reduction in annual fecundity of individuals. Under conditions of random sequences of mild, intermediate, and severe hypoxia years occurring in proportion to their historical frequency, the model predicted a 10% decrease in the long-term population abundance of croaker. A companion paper substitutes hourly DO values from a three-dimensional water quality model for the idealized hypoxia and results in a more realistic population reduction of about 25%.  相似文献   

Effectiveness of Mg–Al-layered double hydroxide for heavy metal removal from mine wastewater and sludge volume reduction     

M. Tamzid Rahman  T. Kameda  S. Kumagai  T. Yoshioka 《International Journal of Environmental Science and Technology》2018,15(2):263-272

Health hazards from heavy metal pollution in water systems are a global environmental problem. Of similar concern is sludge that results from wastewater treatment due to unsatisfactory sludge management technology. Therefore, the effectiveness of using Mg–Al-layered double hydroxide in the removal of heavy metals from mine wastewater was tested and compared with that of calcium hydroxide [Ca(OH)₂], which is a common treatment method for heavy metal removal. Initially, the mine wastewater contained cations of the heavy metals iron (Fe), zinc (Zn), copper (Cu), and lead (Pb). The Mg–Al-layered double hydroxides were able to remove 371, 7.2, 121, and 0.4 mg/L of these pollutants, respectively, using the co-precipitation method. The removal of these metals is most effective using 0.5 g Mg–Al-layered double hydroxide (Mg/Al molar ratio 4) and 20 min of shaking. Zn was removed by the formation of Zn(NO₃)(OH)·H₂O and Zn₅(NO₃)₂(OH)₈ when LDH, Mg/Al molar ratios of 4 and 2, respectively, were used. Similarly, Fe, Cu, and Pb were removed by the formation of Fe–Al-layered double hydroxide, Cu₂(OH)₃·NO₃ and Pb₄(OH)₄(NO₃)₄, respectively. While Ca(OH)₂ is also capable of reducing the heavy metal concentrations below the Japanese recommended values, this analysis shows that using 0.5 g Mg–Al-layered double hydroxide is a better treatment condition for mine wastewater, because it generates lower sludge volumes than 0.1 g of Ca(OH)₂. The measured sludge volume was 1.5 mL for Mg–Al-layered double hydroxide and 2.5 mL for Ca(OH)₂, a nearly twofold further reduction.  相似文献   

Porous Structure Reconstruction Using Convolutional Neural Networks     

Yuzhu Wang  Christoph H. Arns  Sheik S. Rahman  Ji-Youn Arns 《Mathematical Geosciences》2018,50(7):781-799

The three-dimensional high-resolution imaging of rock samples is the basis for pore-scale characterization of reservoirs. Micro X-ray computed tomography (µ-CT) is considered the most direct means of obtaining the three-dimensional inner structure of porous media without deconstruction. The micrometer resolution of µ-CT, however, limits its application in the detection of small structures such as nanochannels, which are critical for fluid transportation. An effective strategy for solving this problem is applying numerical reconstruction methods to improve the resolution of the µ-CT images. In this paper, a convolutional neural network reconstruction method is introduced to reconstruct high-resolution porous structures based on low-resolution µ-CT images and high-resolution scanning electron microscope (SEM) images. The proposed method involves four steps. First, a three-dimensional low-resolution tomographic image of a rock sample is obtained by µ-CT scanning. Next, one or more sections in the rock sample are selected for scanning by SEM to obtain high-resolution two-dimensional images. The high-resolution segmented SEM images and their corresponding low-resolution µ-CT slices are then applied to train a convolutional neural network (CNN) model. Finally, the trained CNN model is used to reconstruct the entire low-resolution three-dimensional µ-CT image. Because the SEM images are segmented and have a higher resolution than the µ-CT image, this algorithm integrates the super-resolution and segmentation processes. The input data are low-resolution µ-CT images, and the output data are high-resolution segmented porous structures. The experimental results show that the proposed method can achieve state-of-the-art performance.  相似文献   

Participatory Vulnerability Reduction (PVR): an urban community-based approach for earthquake management     

Md. Mashrur Rahman  Uttama Barua  Farzana Khatun  Ishrat Islam  Rezwana Rafiq 《Natural Hazards》2018,93(3):1479-1505

Participation of local people during any disaster is enormous. They possess better knowledge and information about their own community than anyone else from the outside. This study proposes Participatory Vulnerability Reduction (PVR), a community-based approach for disaster management. The concept of PVR was applied to an urban community of Dhaka city (Ward no. 06 of Dhaka North City Corporation) which has been identified by the Comprehensive Disaster Management Programme as one of the most vulnerable areas of the city for earthquake. PVR consists three steps, and in each step, different participatory urban appraisal tools were used. In the first step, the community people assessed the earthquake vulnerability. It was found that some certain parts of the study area are highly vulnerable due to lack of accessibility to the critical facilities, inadequacy of open space, poor construction practice and unsuitable soil condition for building construction. This was followed by analyzing the root causes and effects of these problems. Structural fragility of the buildings, construction of settlements by filling the low-lying areas and development of slums beside taller buildings are the three major causes behind the above vulnerable issues. In the second step, capacity of the community was assessed in terms of resources and their organizational structure. In the final step, local people developed the strategies to overcome the vulnerability and a community-based organizational set up was proposed to coordinate the collective actions. Although developed in local context, application of PVR is not limited for earthquake and it can be replicated for other communities as well.  相似文献   

Indices based assessment of built-up density and urban expansion of fast growing Surat city using multi-temporal Landsat data sets     

Shahfahad  Mourya  Mukesh  Kumari  Babita  Tayyab  Mohammad  Paarcha  Aruna  Asif  Rahman  Atiqur 《GeoJournal》2021,86(4):1607-1623

GeoJournal - The population growth in urban areas leads to the expansion of built-up area which leads to a number of serious problems like environmental pollution, destruction of urban ecology,...  相似文献