Long-term evolution of the aerosol debris cloud produced by the 2009 impact on Jupiter     

A. Sánchez-Lavega  G.S. Orton  R. Hueso  L.N. Fletcher  E. García-Melendo  I. de Pater  H.B. Hammel  A. Simon-Miller  F. Marchis  O. Mousis  J. García-Rojas  M. Cecconi  K. Noll  S. Pedraz  P. Kalas  W. Golisch  P. Sears  V. Reddy  R. Binzel  W. Grundy  J. Emery  A. Rivkin  C. Thomas  D. Trilling  K. Bjorkman  A.J. Burgasser  H. Campins  T.M. Sato  Y. Kasaba  J. Ziffer  R. Mirzoyan  H. Bouy 《Icarus》2011,214(2):462-476

We present a study of the long-term evolution of the cloud of aerosols produced in the atmosphere of Jupiter by the impact of an object on 19 July 2009 (Sánchez-Lavega, A. et al. [2010]. Astrophys. J. 715, L155-L159). The work is based on images obtained during 5 months from the impact to 31 December 2009 taken in visible continuum wavelengths and from 20 July 2009 to 28 May 2010 taken in near-infrared deep hydrogen-methane absorption bands at 2.1-2.3 μm. The impact cloud expanded zonally from ∼5000 km (July 19) to 225,000 km (29 October, about 180° in longitude), remaining meridionally localized within a latitude band from 53.5°S to 61.5°S planetographic latitude. During the first two months after its formation the site showed heterogeneous structure with 500-1000 km sized embedded spots. Later the reflectivity of the debris field became more homogeneous due to clump mergers. The cloud was mainly dispersed in longitude by the dominant zonal winds and their meridional shear, during the initial stages, localized motions may have been induced by thermal perturbation caused by the impact’s energy deposition. The tracking of individual spots within the impact cloud shows that the westward jet at 56.5°S latitude increases its eastward velocity with altitude above the tropopause by 5-10 m s⁻¹. The corresponding vertical wind shear is low, about 1 m s⁻¹ per scale height in agreement with previous thermal wind estimations. We found evidence for discrete localized meridional motions with speeds of 1-2 m s⁻¹. Two numerical models are used to simulate the observed cloud dispersion. One is a pure advection of the aerosols by the winds and their shears. The other uses the EPIC code, a nonlinear calculation of the evolution of the potential vorticity field generated by a heat pulse that simulates the impact. Both models reproduce the observed global structure of the cloud and the dominant zonal dispersion of the aerosols, but not the details of the cloud morphology. The reflectivity of the impact cloud decreased exponentially with a characteristic timescale of 15 days; we can explain this behavior with a radiative transfer model of the cloud optical depth coupled to an advection model of the cloud dispersion by the wind shears. The expected sedimentation time in the stratosphere (altitude levels 5-100 mbar) for the small aerosol particles forming the cloud is 45-200 days, thus aerosols were removed vertically over the long term following their zonal dispersion. No evidence of the cloud was detected 10 months after the impact.  相似文献   

Large-Eddy Simulation of Pollutant Removal from a Three-Dimensional Street Canyon   总被引：3，自引：3，他引：0  

Takenobu Michioka  Hiroshi Takimoto  Ayumu Sato 《Boundary-Layer Meteorology》2014,150(2):259-275

Large-eddy simulations were conducted to investigate the mechanism of pollutant removal from a three-dimensional street canyon. Five block configurations with aspect ratios (building height to length) of 1, 2, 4, 8 and $\infty $ were used to create an urban-like array. A pollutant was released from a ground-level line source at the centre of the target canyon floor. For smaller aspect ratios, the relative contribution of the turbulent mass flux to net mass flux at the roof level, which was spatially averaged along the roof-level ventilation area, was closer to unity, indicating that turbulent motions mainly affected pollutant removal from the top of the canyon. As aspect ratio increased, the relative contribution became smaller, owing to strong upwind motions. However, the relative contribution again reached near unity for the infinite aspect ratio (i.e. a two-dimensional street canyon) because of lowered lateral flow convergence. At least 75 % of total emissions from the three-dimensional street canyon were attributable to turbulent motions. Pollutant removal by turbulent motions was related to the coherent structures of low-momentum fluid above the canyons. Though the coherent structure size of the low-momentum fluid differed, the positions of low-momentum fluid largely corresponded to instantaneous high concentrations of pollutant above the target canyon, irrespective of canyon geometry.  相似文献   

Characteristics of Triassic epithermal Au mineralization at the Q prospect,Chatree mining area,Central Thailand     

Ladda Tangwattananukul  Daizo Ishiyama  Osamu Matsubaya  Toshio Mizuta  Punya Charusiri  Hinako Sato  Koichiro Sera 《Resource Geology》2014,64(2):167-181

The Chatree deposit is located in the Loei‐Phetchabun‐Nakhon Nayok volcanic belt that extends from Laos in the north through central and eastern Thailand into Cambodia. Gold‐bearing quartz veins at the Q prospect of the Chatree deposit are hosted within polymictic andesitic breccia and volcanic sedimentary breccia. The orebodies of the Chatree deposit consist of veins, veinlets and stockwork. Gold‐bearing quartz veins are composed mainly of quartz, calcite and illite with small amounts of adularia, chlorite and sulfide minerals. The gold‐bearing quartz veins were divided into five stages based on the cross‐cutting relationship and mineral assemblage. Intense gold mineralization occurred in Stages I and IV. The mineral assemblage of Stages I and IV is characterized by quartz–calcite–illite–laumontite–adularia–chlorite–sulfide minerals and electrum. Quartz textures of Stages I and IV are also characterized by microcrystalline and flamboyant textures, respectively. Coexistence of laumontite, illite and chlorite in the gold‐bearing quartz vein of Stage IV suggests that the gold‐bearing quartz veins were formed at approximately 200°C. The flamboyant and brecciated textures of the gold‐bearing quartz vein of Stage IV suggest that gold precipitated with silica minerals from a hydrothermal solution that was supersaturated by boiling. The δ¹⁸O values of quartz in Stages I to V range from +10.4 to +11.6‰ except for the δ¹⁸O value of quartz in Stage IV (+15.0‰). The increase in δ¹⁸O values of quartz at Stage IV is explained by boiling. P_H2O is estimated to be 16 bars at 200°C. The f_CO2 value is estimated to be 1 bar based on the presence of calcite in the mineral assemblage of Stage IV. The total pressure of the hydrothermal solution is approximately 20 bars at 200°C, suggesting that the gold‐bearing quartz veins of the Q prospect formed about 200 m below the paleosurface.  相似文献   

ISRM Suggested Method for the Needle Penetration Test   总被引：1，自引：0，他引：1  

Resat Ulusay  Ömer Aydan  Zeynal A. Erguler  Dominique J. M. Ngan-Tillard  Takafumi Seiki  Wim Verwaal  Yasuhito Sasaki  Akira Sato 《Rock Mechanics and Rock Engineering》2014,47(3):1073-1085

  相似文献   

The age of the Roter Kamm impact crater,Namibia: Constraints from 40Ar-39Ar,K-Ar,Rb-Sr,fission track,and 10Be-26Al studies     

Christian Koeberl  Jack B. Hartung  Michael J. Kunk  Jeffrey Klein  Jun-Ichi Matsuda  Keisuke Nagao  Wolf Uwe Reimold  Dieter Storzer 《Meteoritics & planetary science》1993,28(2):204-212

Abstract The well-preserved 2.5 km diameter Roter Kamm impact crater is located in the Namib desert in Namibia. The impact has occurred in Precambrian granitic and granodioritic orthogneisses of the 1200–900 Ma old Namaqualand Metamorphic Complex which were partly covered by Gariep metasediments; the granites are invaded by quartz veins and quartz-feldspar-pegmatites. Previous geological field evidence suggested a crater age of about 5–10 Ma. In order to constrain this age, we selected a set of basement rocks (granites, granodiorites) exposed at the crater rim and studied the Rb-Sr, K-Ar, ⁴⁰Ar-³⁹Ar, and ¹⁰Be-²⁶Al isotopic systems as well as apatite fission track ages of these samples. The Rb-Sr isotopic systematics confirm the derivation of these samples from the Namaqualand basement (age about 1.29 Ga), which underwent Damaran orogenesis at about 650 Ma. No basement rocks with Rb-Sr ages younger than about 410 Ma were identified. The K-Ar ages of pseudotachylite and melt breccia samples show that these samples are dominated by incompletely degassed fragments of basement rocks, with some retaining their original metamorphic ages of about 470 Ma. The apatite fission track ages range from 20–28 Ma, which may be interpreted as an extension of the 25 Ma Burdigalian peneplanation event, or as incomplete resetting of the apatite fission tracks during the impact event. The ¹⁰Be and ²⁶Al exposure age of a quartz sample isolated from a quartz-pegmatite was found to be 150 ka; it is likely that the exposure of the sample began after material covering it had been removed by erosion 150 ka ago. Two glassy fractions extracted from a rim granite were dated by ⁴⁰Ar-³⁹Ar analysis. One sample gives practically a plateau age of 3.7 ± 0.3 Ma, while the other gives a minimum age of 3.6 Ma. The best available age estimate for the Roter Kamm crater is therefore 3.7 ± 0.3 Ma.  相似文献   

A procedure for tidal analysis with a Bayesian information criterion   总被引：16，自引：0，他引：16  

Y. Tamura  T. Sato  M. Ooe  M. Ishiguro 《Geophysical Journal International》1991,104(3):507-516

  相似文献   

A surface complexation model for sulfate and selenate on iron oxides consistent with spectroscopic and theoretical molecular evidence     

Keisuke Fukushi  Dimitri A. Sverjensky 《Geochimica et cosmochimica acta》2007,71(1):1-24

Sulfate and selenate adsorption on iron oxides are important reactions in natural systems under a very wide range of pH values, ionic strengths, and electrolyte compositions. Under such conditions, spectroscopic and theoretical calculations have demonstrated the potential importance of a variety of surface species. Understanding the variations in the surface speciation of these oxyanions is fundamental to prediction of their partitioning between minerals and aqueous solutions. In the present study, published experimental spectroscopic and theoretical molecular evidence of the identity of sulfate/selenate surface species are integrated with a surface complexation model consistent with a wide variety of experimental adsorption, surface titration, and proton coadsorption data to define the surface speciation of sulfate and selenate on iron oxides under a wide range of conditions. The analysis was carried out with the extended triple layer model (ETLM) taking into account the electrostatics of water dipole desorption during ligand exchange reactions. On seven out of eight goethites studied, sulfate and selenate surface reactions can be represented by the formation of a monodentate-mononuclear inner-sphere and a bidentate-binuclear outer-sphere (or H-bonded) species according to