The paper aims at introducing practical methods for power capture performance enhancement of a heaving wave energy converter in irregular seas. The optimum control solution requires tuning to wave frequency based on wave force information. However, identification of the wave frequency in irregular seas is considered to be a complex and difficult task. This is partly due to technical difficulties in determination of the wave force. Besides, there are no clear guidelines for identification of wave frequency from an irregular sea state based wave force information. In a typical application, one of the available sources of information about the wave properties is the wave elevation record. The proposed approach presents a method for estimation of the wave frequency information from the wave elevation data by using signal processing and filtering techniques. The proposed method uses filters to generate an estimation of wave force information, which is used to identify the local wave frequency by method of a time-series analysis of the data. This wave frequency information is then used in tuning the device. The details of the proposed techniques, the model of the wave energy converter, the simulated sea states and the related simulation results are also presented. 相似文献
In this study uranium and thorium contents and depositional characteristics of ay rhan bituminous shales( BS), west of Ankara(central Anatolia), are investigated. Samples used were collected from boreholes opened by Park Holding Ltd. A total of 25 samples were taken from bituminous shale levels in boreholes drilled at 6 different locations in the study area. The H rka formation which hosts bituminous shale deposits is a volcanosedimentary sequence and all lithofacies indicate that a lacustrine environment where the water level was continuously changed. In addition to hydrocarbon generation potential, bituminous shales also accumulate significant amount of radioactive elements such as uranium and thorium. The average uranium and thorium concentrations of BS(1.83/2.62 ppm) are much lower than averages of UC, NASK and PAAS(uranium: 2.70/2.66/3.10 ppm; thorium: 8.50/12.30/14.60 ppm). Low uranium contents in comparison to those of similar lacustrine environments might be attributed to that waters of depositional environment of BS contain low concentration of dissolved uranium and redox conditions were of oxic and dioxic character. Correlation data indicate that U and Th have a similar source and are associated predominantly with clays and phosphates and dominantly with organic material. Radioactive elements in the basin might be derived from Paleozoic granites and metamorphites(e.g. gneiss, schist) which comprise the basement and volcanism which was active in the region throughout the Miocene period. These elements are probably associated with uraniferous phosphate minerals(e.g. autunite, torbernite) which occur in granite, gneiss and schist. BS with average TOC content of 10.96 % shows very good/perfect source rock potential. Positive correlations between Gamma-Ray values and U, Th and K concentrations imply that radioactivity might be originated from these three elements. 相似文献
This study aimed to reveal the temporal statistics, formation mechanisms, suitable land/sea surface (LS/SS) and upper-level atmospheric conditions, and predictability of thundersnow (TSSN) events that occurred between 2000 and 2021 in the Marmara Region with atmospheric stability indexes. Aviation reports from 11 airports were analyzed throughout the period, and no TSSN events were found at four airports. A total of 19 TSSN events were identified, and six events were found in 2015, when the sea-effect snow (SES) mechanisms were observed four times. The majority of TSSN events were of very short duration (0–1 h), and no significant trend was observed in terms of intraday distribution. SES mechanism was observed in 17 of the 19 TSSN events, and the dominance of northern flows was detected at all airports and at the sub-inversion upstream levels. In terms of air-sea interaction, suitable temperature differences between the SS and 850/700 hPa (17 °C and 27 °C on average), and the transfer of heat-moisture fluxes from the SS to the upper-atmosphere were possible in almost all TSSN events. In this way, meteorological parameters were sufficient for the formation and strengthening of the convective layer. In addition, the presence of directional wind shear and the observation of inversion layers restricting convective movements at higher levels instead of near the surface ensured that the moisture requirement, lifting mechanism, and unstable atmospheric conditions required for the formation of TS were provided. The CAPE values were very low for winter TSs. Total Total Index and TQ Index produced the most appropriate results for TSSN prediction.
Sand and dust storms are causing hazards and problems in aviation as well as the dangers and distresses they cause on living things. The low meteorological visibility, the presence of strong winds with gust, and the transport of dust and sand particles by the wind are dangerous on landing and departure of aircrafts, and even on planes that are parked. The main aim of the study is to examine the meteorological conditions causing the dust storm that took place in the Arabian Peninsula on February 28, 2009, and to determine the source of dust caused dust storm, sand storm, blown sand, and blown dust at the airports. Within the scope of the study, aviation routine weather report (METAR) and aviation selected special weather report (SPECI) reports have been assessed at many airports over Arabian Peninsula (AP), the northern part of the AP and North Africa. As model outputs; NCEP–DOE Reanalysis 2 data, BSC–DREAM8B, and HYSPLIT model were used. In the satellite images; METEOSAT MSG dust RGB images, MODIS, and Kalpana-1 data were used. According to obtained results, dust storms were detected in Bahrain, Kuwait, Saudi Arabia, and United Arab Emirates (UAE). At Al-Ahsa Airport in Saudi Arabia, the lowest visibility measured on February 28, 2009, dropping to 200 m, which was dominated by blowing sand. The source region of the dust observed at Dubai Airport in UAE is the eastern regions of the Rub’al Khali Desert located between Saudi Arabia, Oman, and UAE. 相似文献
Assuming a perfect fluid distribution of matter Bianchi type Vspace-time is considered and using a new generation techniqueit is shown that the field equations are solvable for anyarbitrary cosmic scale function. Solutions for particularforms of cosmic scale functions are obtained, and thegeometrical and physical properties of these solutions discussed. 相似文献
Marbles are extensively quarried at four different stratigraphical levels from Permo-Carbonifereous to Paleogene in the southern flank of the Menderes Massif in SW Turkey. These marbles differ in color, texture and pattern depending on their stratigraphical levels and are well known in the international trade as the Mugla Black (Permo-Carbonifereous), Mugla White (Cretaceous), Milas Lemon, Lilac, Aubergine, Pearl, Veined and White (Triassic) and Aegean Bordeaux (Paleogene) marbles. The mineralogical, chemical, physical and mechanical properties of the representative marbles samples obtained from the quarries working in four major metamorphic carbonate horizons in the cover successions of the Menderes Massif's southern flank in SW Turkey are determined and the results of over 1700 tests carried out on the selected marble samples are presented. The mean test values of the physical and mechanical tests are in general, found to be above the threshold acceptance values suggested by the American and Turkish Standards for the use of marbles as a building stone and in the same order as the properties of Italian (Carrara) and Greek marbles reported in the literature. Additionally, the mean test values of the marbles have given high correlations with one another and the relations obtained between the index test results determined by simple techniques requiring minimal sample preparation effort and the mean values of the more elaborate engineering tests results are presented as tables and graphs for wider use. 相似文献
The Mugla province is one of the major marble producing regions located in the southern flank of the Menderes Massif in SW Turkey. The Menderes Massif is a regionally metamorphosed massif with an old Pan-African core and cover successions from the Permo–Carboniferous to Paleocene. There are four major metamorphic carbonate horizons in the cover successions exploited for the marble production. These horizons are located within the Permo–Carboniferous, Triassic, Upper Cretaceous and Paleocene successions along the southern flank of the Menderes Massif. Here the world wide known marbles with names such as the Mugla Black, the Milas White, Veined, Pearl, Aubergine, Lilac and Lemony, the Mugla White and the Aegean Bordeaux are found.
Detailed geological studies were carried out in selected marble quarries representing the different stratigraphic levels to determine the geological parameters affecting the marble production in the southern flank of the Menderes Massif in SW Turkey. The geological parameters such as bedding, joints, schist interlayers and mica filled joints affecting the block production from the marble beds are considered to be primary features. The presence of dolomite bands and lenses, abnormal sized calcite crystals and emery minerals which affect the slab and the production qualities and appearances are considered to be secondary geological parameters. The primary and secondary geological parameters affecting the marble productions at different stratigraphical levels in SW Turkey, are determined and the practical aspects of these findings are discussed. 相似文献
The aim of this study is to predict the peak particle velocity (PPV) values from both presently constructed simple regression
model and fuzzy-based model. For this purpose, vibrations induced by bench blasting operations were measured in an open-pit
mine operated by the most important magnesite producing company (MAS) in Turkey. After gathering the ordered pairs of distance
and PPV values, the site-specific parameters were determined using traditional regression method. Also, an attempt has been
made to investigate the applicability of a relatively new soft computing method called as the adaptive neuro-fuzzy inference
system (ANFIS) to predict PPV. To achieve this objective, data obtained from the blasting measurements were evaluated by constructing
an ANFIS-based prediction model. The distance from the blasting site to the monitoring stations and the charge weight per
delay were selected as the input parameters of the constructed model, the output parameter being the PPV. Valid for the site,
the PPV prediction capability of the constructed ANFIS-based model has proved to be successful in terms of statistical performance
indices such as variance account for (VAF), root mean square error (RMSE), standard error of estimation, and correlation between
predicted and measured PPV values. Also, using these statistical performance indices, a prediction performance comparison
has been made between the presently constructed ANFIS-based model and the classical regression-based prediction method, which
has been widely used in the literature. Although the prediction performance of the regression-based model was high, the comparison
has indicated that the proposed ANFIS-based model exhibited better prediction performance than the classical regression-based
model. 相似文献