Application of HF radar currents to oil spill modelling     

Abascal AJ  Castanedo S  Medina R  Losada IJ  Alvarez-Fanjul E 《Marine pollution bulletin》2009,58(2):238-248

In this work, the benefits of high-frequency (HF) radar currents for oil spill modeling and trajectory analysis of floating objects are analyzed. The HF radar performance is evaluated by means of comparison between a drifter buoy trajectory and the one simulated using a Lagrangian trajectory model. A methodology to optimize the transport model performance and to calculate the search area of the predicted positions is proposed. This method is applied to data collected during the Galicia HF Radar Experience. This experiment was carried out to explore the capabilities of this technology for operational monitoring along the Spanish coast. Two long-range HF radar stations were installed and operated between November 2005 and February 2006 on the Galician coast. In addition, a drifter buoy was released inside the coverage area of the radar. The HF radar currents, as well as numerical wind data were used to simulate the buoy trajectory using the TESEO oil spill transport model. In order to evaluate the contribution of HF radar currents to trajectory analysis, two simulation alternatives were carried out. In the first one, wind data were used to simulate the motion of the buoy. In the second alternative, surface currents from the HF radar were also taken into account. For each alternative, the model was calibrated by means of the global optimization algorithm SCEM-UA (Shuffled Complex Evolution Metropolis) in order to obtain the probability density function of the model parameters. The buoy trajectory was computed for 24 h intervals using a Monte Carlo approach based on the results provided in the calibration process. A bivariate kernel estimator was applied to determine the 95% confidence areas. The analysis performed showed that simulated trajectories integrating HF radar currents are more accurate than those obtained considering only wind numerical data. After a 24 h period, the error in the final simulated position improves using HF radar currents. Averaging the information from all the simulated daily periods, the mean search and rescue area calculated using HF radar currents, is reduced by approximately a 62% in comparison with the search area calculated without these data. These results show the positive contribution of HF radar currents for trajectory analysis, and demonstrate that these data combined with atmospheric forecast models, are of value for trajectory analysis of oil spills or floating objects.  相似文献   

Fe,Mn, P and S Speciation in Sediments from the Capivara Hydroelectric Dam Lake (Brazil) as an Indicator of Anthropogenic Influences     

Wagner José Barreto  Dilson Norio Ishikawa  Ieda Spacino Scarminio  João de Souza Costa  Paulo dos Santos Nora  Miriam de Fatima Soares  Romilaine Mansano Nicolau  Adriana Celeste Esteves Gonçalves  Sonia Regina Giancoli Barreto 《洁净——土壤、空气、水》2008,36(4):353-359

The conservation of large water resources is essential for the preservation of human life. The quantification and, more importantly, the speciation of chemical substances that indicate the presence of anthropogenic contamination in water resources are of great importance. This paper presents the results of analysis for the determination of organic, inorganic and total phosphorus, pseudo‐sulfur, and iron and manganese, in five fractions, in water sediments collected from the Capivara Hydroelectric Power Plant, Brazil. A study on the seasonal variation of these parameters was conducted, with data having been collected in the winter and in the summer, at two sites along the dam, 5 km apart, close to the city of Primeiro de Maio. Phosphorous was found in sediments and adjacent soil in the organic form (OP), and was used as an indicator of anthropogenic influence on the reservoir banks. Speciation of potentially toxic Mn showed that it is present in the exchangeable fraction of the 0–5 cm depth layer (sediment/water interface), making its transfer to the water column possible. Results from this study showed that domestic and industrial effluent treatment measures are needed for the preservation of the quality of aquatic environments.  相似文献   

Endogenous growth in channelized komatiite lava flows: evidence from spinifex-textured sills at Pyke Hill and Serpentine Mountain,Western Abitibi Greenstone Belt,Northeastern Ontario,Canada     

Michel G. Houlé  Sonia Préfontaine  Anthony D. Fowler  Harold L. Gibson 《Bulletin of Volcanology》2009,71(8):881-901

Spinifex-textured sills (i.e., veins) characterized by komatiitic magmas that have intruded their own volcanic-piles have long been recognized. For instance, in the early 1970s, Pyke and coworkers, in their classic work at Pyke Hill in Munro Township, noted that not all spinifex-bearing ultramafic rocks formed as lava flows, rather some were clearly emplaced as small dikes and sills. Several hypotheses have been proposed to explain spinifex-textured sills: intrusion into a cold host, filter pressing, or drainage of residual liquid. However, these do not satisfactorily explain the phenomenon. Field and petrographic observations at Pyke Hill and Serpentine Mountain demonstrate that spinifex-bearing komatiite sills and dikes were emplaced during channel inflation processes when new magma was intruded into a cooler, semi-consolidated but permeable cumulate material. Komatiitic liquids were intruded into the olivine cumulate rocks near the boundary between the spinifex and the cumulate zones of well-organized to organized komatiite flows. Spinifex-textured sills are generally tabular in morphology, stacked one above another, with curviplanar contacts sub-parallel to stratigraphy. Some sills exhibit complex digitated apophyses. Thinner sills typically have a random olivine spinifex texture similar, though generally composed of coarser crystals, to that of komatiite lava flows. Thicker sills exhibit more complex organization of their constituent crystals characterized by zones of random olivine spinifex, overlying zones of organized coarse spinifex crystals similar to those found in lava flows. They have striking coarse dendritic spinifex zones composed of very large olivine crystals, up to several centimetres long and up to 1 cm wide that are not observed in lava flows. Typically, at the sill margins, the cumulate material of the host flow is composed of euhedral to subhedral olivine crystals that are larger than those distal to the contact. Many of these margin-crystals have either concentric overgrowth shells or dendritic olivine overgrowths that grew from the cumulate-sill contact toward the sill interior. The dendrites grew on pre-existing olivine cumulate at the contact in response to a sharp temperature gradient imposed by the intrusion of hot material, whereas the concentric overgrowths formed as new melt percolated into the unconsolidated groundmass of the host-flow cumulate material. Spinifex-textured sills and dikes occur in well-organized to organized flows that are interpreted to have formed by “breakouts” above and peripheral to lava pathways (channels/conduits) as a result of inflation that accompanied voluminous komatiitic eruptions responsible for the construction and channelization of komatiitic flow fields. The spinifex-textured dikes and sills represent komatiitic lava that was originally emplaced into the channel roof during periods of episodic inflation that resulted in lava breakouts and was subsequently trapped in the “roof rocks” during periods of channel deflation. Accordingly, the occurrence of spinifex-textured sills and dikes may indicate proximity to, and aid in the identification and delineation of lava channel-ways that could potentially host Ni–Cu–(PGE) mineralization within komatiitic lava flow-fields.  相似文献   

Sensitivity of Turbine-Height Wind Speeds to Parameters in Planetary Boundary-Layer and Surface-Layer Schemes in the Weather Research and Forecasting Model     

Ben Yang  Yun Qian  Larry K. Berg  Po-Lun Ma  Sonia Wharton  Vera Bulaevskaya  Huiping Yan  Zhangshuan Hou  William J. Shaw 《Boundary-Layer Meteorology》2017,162(1):117-142

We evaluate the sensitivity of simulated turbine-height wind speeds to 26 parameters within the Mellor–Yamada–Nakanishi–Niino (MYNN) planetary boundary-layer scheme and MM5 surface-layer scheme of the Weather Research and Forecasting model over an area of complex terrain. An efficient sampling algorithm and generalized linear model are used to explore the multiple-dimensional parameter space and quantify the parametric sensitivity of simulated turbine-height wind speeds. The results indicate that most of the variability in the ensemble simulations is due to parameters related to the dissipation of turbulent kinetic energy (TKE), Prandtl number, turbulent length scales, surface roughness, and the von Kármán constant. The parameter associated with the TKE dissipation rate is found to be most important, and a larger dissipation rate produces larger hub-height wind speeds. A larger Prandtl number results in smaller nighttime wind speeds. Increasing surface roughness reduces the frequencies of both extremely weak and strong airflows, implying a reduction in the variability of wind speed. All of the above parameters significantly affect the vertical profiles of wind speed and the magnitude of wind shear. The relative contributions of individual parameters are found to be dependent on both the terrain slope and atmospheric stability.  相似文献   

Influence of intensity of motion on the seismic response of structures with asymmetric force-deformation curves     

Sonia E. Ruiz 《地震工程与结构动力学》1991,20(1):1-9

Asymmetrically yielding single-degree-of-freedom elastoplastic systems are subjected to simulated accelerograms based on El Centro-NS, 1940 ground motion (wide frequency band) to calculate the corresponding ductility demands. Results are compared with those corresponding to simulated accelerograms of the SCT-EW, 1985 Mexico earthquake (narrow frequency band) obtained in a previous work. Results obtained reveal that the characteristics of the excitation influence the response of asymmetrically yielding structures and that the differences found on responses corresponding to both earthquakes are due to frequency content, duration and/or intensity of motion. The effect of the latter concepts is studied using modulating sinusoidal excitations as well as accelerograms recorded on soft and hard soils of Mexico City. Two alternate expressions are proposed to evaluate the increase in ductility demands of structures with asymmetric force-displacement curves with respect to symmetric ones. Those expressions take into account motion intensity and duration, as well as seismic design coefficient.  相似文献   

Long-term changes in the frequency,intensity and duration of extreme storm surge events in southern Europe     

Alba Cid  Melisa Menéndez  Sonia Castanedo  Ana J. Abascal  Fernando J. Méndez  Raúl Medina 《Climate Dynamics》2016,46(5-6):1503-1516

  相似文献   

Observations of Comet 9P/Tempel 1 around the Deep Impact event by the OSIRIS cameras onboard Rosetta     

Horst Uwe Keller  Sonia Fornasier  Stubbe F. Hviid  Jörg Knollenberg  Miriam Rengel  Gabriele Cremonese  Detlef Koschny  Ekkehard Kührt  Holger Sierks  Cesare Barbieri  Hans Rickman  Michael F. A'Hearn  Maria-Antonella Barucci  Vania da Deppo  Björn J.R. Davidsson  Stefano Debei  Fritz Gliem  José J. Lopez Moreno  Giampiero Naletto  Angel Sanz Andrés 《Icarus》2007,187(1):87-103

The OSIRIS cameras on the Rosetta spacecraft observed Comet 9P/Tempel 1 from 5 days before to 10 days after it was hit by the Deep Impact projectile. The Narrow Angle Camera (NAC) monitored the cometary dust in 5 different filters. The Wide Angle Camera (WAC) observed through filters sensitive to emissions from OH, CN, Na, and OI together with the associated continuum. Before and after the impact the comet showed regular variations in intensity. The period of the brightness changes is consistent with the rotation period of Tempel 1. The overall brightness of Tempel 1 decreased by about 10% during the OSIRIS observations. The analysis of the impact ejecta shows that no new permanent coma structures were created by the impact. Most of the material moved with . Much of it left the comet in the form of icy grains which sublimated and fragmented within the first hour after the impact. The light curve of the comet after the impact and the amount of material leaving the comet ( of water ice and a presumably larger amount of dust) suggest that the impact ejecta were quickly accelerated by collisions with gas molecules. Therefore, the motion of the bulk of the ejecta cannot be described by ballistic trajectories, and the validity of determinations of the density and tensile strength of the nucleus of Tempel 1 with models using ballistic ejection of particles is uncertain.  相似文献   

Vulnerability and adaptation in a dryland community of the Elqui Valley, Chile   总被引：1，自引：0，他引：1  

Gwendolynne Young  Humberto Zavala  Johanna Wandel  Barry Smit  Sonia Salas  Elizabeth Jimenez  Melitta Fiebig  Roxana Espinoza  Harry Diaz  Jorge Cepeda 《Climatic change》2010,98(1-2):245-276

Livelihoods in drylands are already challenged by the demands of climate variability, and climate change is expected to have further implications for water resource availability in these regions. This paper characterizes the vulnerability of an irrigation-dependent agricultural community located in the Elqui River Basin of Northern Chile to water and climate-related conditions in light of climate change. The paper documents the exposures and sensitivities faced by the community in light of current water shortages, and identifies their ability to manage these exposures under a changing climate. The IPCC identifies potentially increased aridity in this region with climate change; furthermore, the Elqui River is fed by snowmelt and glaciers, and its flows will be affected by a warming climate. Community vulnerability occurs within a broader physical, economic, political and social context, and vulnerability in the community varies amongst occupations, resource uses and accessibility to water resources, making some more susceptible to changing conditions in the future. This case study highlights the need for adaptation to current land and water management practices to maintain livelihoods in the face of changes many people are not expecting.  相似文献   

Influence of the spatial distribution of energy-dissipating bracing elements on the seismic response of multistorey frames     

Sonia E. Ruiz  Olga E. Urrego  Francisco L. Silva 《地震工程与结构动力学》1995,24(11):1511-1525

Several reinforced concrete frames with different dissipator distributions, and a conventional moment-resisting frame, are compared in order to select the best dissipator distribution from the point of view of seismic response and structural design. The structures with dissipators are designed according to a criterion proposed in the present paper. Each frame is excited with a set of eleven simulated accelerograms. The choice of the best dissipation distribution is based mainly on the differences between the mean of the maximum overturning moments developed at the base of the frames and between the weights of steel reinforcement and concrete resulting from the structural design of each frame. A comparison of initial construction costs of a building with dissipators and a conventional building shows that the former is 3·5 per cent more expensive.  相似文献   

Geology and geochemistry of the Águas Claras and Pico Iron Mines, Quadrilátero Ferrífero, Minas Gerais, Brazil   总被引：1，自引：0，他引：1  

Carlos Alberto Spier  Sonia Maria Barros de Oliveira  Carlos Alberto Rosière 《Mineralium Deposita》2003,38(6):751-774

The Águas Claras and Pico Mines are two world-class iron-ore mines hosted within the Lower- Proterozoic banded iron-formations (locally known as itabirites) of the Minas Supergroup located in the Quadrilátero Ferrífero district, Minas Gerais, Brazil. The Águas Claras orebody consists of a 2,500-m-long roughly tabular-shaped lens hosted within the dolomitic itabirite of the Cauê Formation. Dolomitic itabirite is the protore of the soft high-grade iron ore, which is the main ore type of the Águas Claras orebody, representing about 85% of the 284 Mt mined since 1973, with the remaining 15% comprising hard high-grade ore. Hematite is the main constituent of the iron ores. It occurs as martite, granular hematite and locally as specularite. Magnetite appears subordinately as relicts within martite and hematite crystals. Gangue minerals are very rare. These consist of dolomite, chlorite, talc, and apatite, and are especially common in contact with the protore. This virtual absence of gangue minerals is reflected in the chemistry of ores that are characterized by very high Fe contents (an average of 68.2% Fe).The Pico orebody is a continuous ~3,000-m-long body of a lenticular shape hosted within siliceous itabirite, which is the protore of the soft high- and low-grade ores at the Pico Mine. The soft high-grade ores, together with the low-grade ores, called iron-rich itabirite, are the main types of ore, and respectively represent approximately 51 and 29% of the reserves. The remaining 20% consists of hard high-grade ore. The iron oxide mineralogy is the same as that of the Águas Claras Mine, but in different proportions. Gangue minerals are very rare in the high-grade ores, but are slightly more common in the iron-rich itabirite. Quartz is the dominant gangue mineral, and is found with minor quantities of chlorite. The chemistry of the high-grade ores is characterized by high Fe contents (an average of 67.0%) and low P, Al₂O₃, and SiO₂, which are concentrated in the fines. Iron-rich itabirites average 58.6% Fe and 13.5% SiO₂.The genesis of the soft high-grade ores and iron-rich itabirites is related to supergene processes. Leaching of the gangue minerals by groundwater promoted the residual iron enrichment of the itabirites. This process was favored by the tropical climate and topographic situation. The original composition of the itabirites and the presence of structures controlling the circulation of the groundwater have influenced the degree of iron enrichment. The hard high-grade ores are of a hypogene origin. Their genesis is attributed to hydrothermal solutions that leached the gangue minerals and filled the spaces with hematite. This process remains a source of debate and is not yet fully understood.Editorial handling: S.G. Hagemann  相似文献