New results on the resistivity structure of Merapi Volcano (Indonesia), derived from three-dimensional restricted inversion of long-offset transient electromagnetic data     

Michael Commer  Stefan L. Helwig  reas Hördt  Carsten Scholl  Bülent Tezkan 《Geophysical Journal International》2006,167(3):1172-1187

  相似文献   

Decision-support systems for groundwater protection: innovative tools for resource management   总被引：1，自引：0，他引：1  

Stefan Kollarits  Gerhard Kuschnig  Miran Veselic  Ante Pavicic  Corrado Soccorso  Marina Aurighi 《Environmental Geology》2006,49(6):840-848

Governmental authorities are forced by law to make decisions within the framework of European, national and regional directives in the fields of spatial planning, groundwater and environmental protection. These tasks can be supported by a decision-support system, which integrates data from various sources and helps to make decision processes more effective and transparent. Basic work for such a decision support system has been done in a transnational and interdisciplinary project (Interreg II C: KATER), including metadata definition, metadata system, cartographic tools and GIS tools. The direct integration of these tools and information in the decision process will be implemented in the next few years (project KATER II).  相似文献   

The eastern Tonale fault zone: a ‘natural laboratory’ for crystal plastic deformation of quartz over a temperature range from 250 to 700 °C     

Michael Stipp  Holger Stünitz  Rene Heilbronner  Stefan M. Schmid 《Journal of Structural Geology》2002,24(12)

Near the eastern end of the Tonale fault zone, a segment of the Periadriatic fault system in the Italian Alps, the Adamello intrusion produced a syn-kinematic contact aureole. A temperature gradient from 250 to 700 °C was determined across the Tonale fault zone using critical syn-kinematic mineral assemblages from the metasedimentary host rocks surrounding deformed quartz veins. Deformed quartz veins sampled along this temperature gradient display a transition from cataclasites to mylonites (frictional–viscous transition) at 280±30 °C. Within the mylonites, zones characterized by different dynamic recrystallization mechanisms were defined: Bulging recrystallization (BLG) was dominant between 280 and 400 °C, subgrain rotation recrystallization (SGR) in the 400–500 °C interval, and the transition to dominant grain boundary migration recrystallization (GBM) occurred at 500 °C. The microstructures associated with the three recrystallization mechanisms and the transitions between them can be correlated with experimentally derived dislocation creep regimes. Bulk texture X-ray goniometry and computer-automated analysis of preferred [c]-axis orientations of porphyroclasts and recrystallized grains are used to quantify textural differences that correspond to the observed microstructural changes. Within the BLG- and SGR zones, porphyroclasts show predominantly single [c]-axis maxima. At the transition from the SGR- to the GBM zone, the texture of recrystallized grains indicates a change from [c]-axis girdles, diagnostic of multiple slip systems, to a single maximum in Y. Within the GBM zone, above 630±30 °C, the textures also include submaxima, which are indicative of combined basal a- and prism [c] slip.  相似文献   

DNAPL Characterization Methods and Approaches, Part 2: Cost Comparisons   总被引：1，自引：1，他引：1  

Mark L. Kram  Arturo A. Keller  Joseph Rossabi  Lome G. Everett 《Ground Water Monitoring & Remediation》2002,22(1):46-61

Contamination from the use of chlorinated solvents, often classified as dense nonaqueous phase liquids (DNAPLs) when in an undissolved state, pose environmental threats to ground water resources worldwide. DNAPL site characterization method performance comparisons are presented in a companion paper (Kram et al. 2001). This study compares the costs for implementing various characterization approaches using synthetic unit model scenarios (UMSs), each with particular physical characteristics. Unit costs and assumptions related to labor, equipment, and consumables are applied to determine costs associated with each approach for various UMSs. In general, the direct-push sensor systems provide cost-effective characterization information in soils that are penetrable with relatively shallow (less than 10 to 15 m) water tables. For sites with impenetrable lithology using direct-push techniques, the Ribbon NAPL Sampler Flexible Liner Underground Technologies Everting (FLUTe) membrane appears to be the most cost-effective approach. For all scenarios studied, partitioning interwell tracer tests (PITTs) are the most expensive approach due to the extensive pre-and post-PITT requirements. However, the PITT is capable of providing useful additional information, such as approximate DNAPL saturation, which is not generally available from any of the other approaches included in this comparison.  相似文献   

Temporal variations in magma composition at Merapi Volcano (Central Java, Indonesia): magmatic cycles during the past 2000 years of explosive activity   总被引：1，自引：0，他引：1  

Ralf Gertisser  Jrg Keller 《Journal of Volcanology and Geothermal Research》2003,123(1-2):1

Merapi Volcano (Central Java, Indonesia) has been frequently active during Middle to Late Holocene time producing basalts and basaltic andesites of medium-K composition in earlier stages of activity and high-K magmas from 1900 ¹⁴C yr BP to the present. Radiocarbon dating of pyroclastic deposits indicates an almost continuous activity with periods of high eruption rates alternating with shorter time spans of distinctly reduced eruptive frequency since the first appearance of high-K volcanic rocks. Geochemical data of 28 well-dated, prehistoric pyroclastic flows of the Merapi high-K series indicate systematic cyclic variations. These medium-term compositional variations result from a complex interplay of several magmatic processes, which ultimately control the periodicity and frequency of eruptions at Merapi. Low eruption rates and the absence of new influxes of primitive magma from depth allow the generation of basaltic andesite magma (56–57 wt% SiO₂) in a small-volume magma reservoir through fractional crystallisation from parental mafic magma (52–53 wt% SiO₂) in periods of low eruptive frequency. Magmas of intermediate composition erupted during these stages provide evidence for periodic withdrawal of magma from a steadily fractionating magma chamber. Subsequent periods are characterised by high eruption rates that coincide with shifts of whole-rock compositions from basaltic andesite to basalt. This compositional variation is interpreted to originate from influxes of primitive magma into a continuously active magma chamber, triggering the eruption of evolved magma after periods of low eruptive frequency. Batches of primitive magma eventually mix with residual magma in the magmatic reservoir to decrease whole-rock SiO₂ contents. Supply of primitive magma at Merapi appears to be sufficiently frequent that andesites or more differentiated rock types were not generated during the past 2000 years of activity. Cyclic variations also occurred during the recent eruptive period since AD 1883. The most recent eruptive episode of Merapi is characterised by essentially uniform magma compositions that may imply the existence of a continuously active magma reservoir, maintained in a quasi-steady state by magma recharge. The whole-rock compositions at the upper limit of the total SiO₂ range of the Merapi suite could also indicate the beginning of another period of high eruption rates and shifts towards more mafic compositions.  相似文献   

Optimization of the Sampling Technique for the Determination of Dissolved Hydrogen in Groundwater     

Axel Heimann  Silke Marczinek  Karin Kloosb  Stefan Peiffer 《洁净——土壤、空气、水》2003,31(6):491-500

In this study a field‐sampling technique for dissolved hydrogen (H₂) in groundwater will be presented which allows the transport of gaseous samples into the laboratory for further analysis. The method consists of transferring the headspace trapped in a gas‐sampling bulb which is continuously purged by groundwater into previously evacuated vials using a gas‐tight syringe. Three transfer steps with preceding evacuation of the vial led to a H₂‐recovery of 100 % in laboratory experiments. The method has been applied to determine H₂ concentrations in an aquifer contaminated with chlorinated solvents. Tests concerning the effect of different pumping techniques on H₂ concentrations revealed that most reliable values were obtained with a bladder pump, while an electrically driven submersible pump generated considerable amounts of hydrogen due to electrochemical interactions with the sampled water. Concentrations of dissolved hydrogen in field and laboratory samples were about two orders of magnitude higher when sampling was performed with the electrically driven submersible pump compared to sampling with the bladder pump and a peristaltic pump. Lab experiments with a Plexiglas reservoir to produce H₂‐enriched water were used to study the effect of two tubing materials (PVC, polyamide) on H₂ losses. PVC tubing turned out to allow transfer of H₂‐enriched water over 25 m without significant losses, while PA‐tubing was not suitable for sampling of H₂.  相似文献   

Lower crustal melting and the role of open-system processes in the genesis of syn-orogenic quartz diorite–granite–leucogranite associations: constraints from Sr–Nd–O isotopes from the Bandombaai Complex, Namibia     

Tina van de Flierdt  Stephan Hoernes  Stefan Jung  Peter Masberg  Edgar Hoffer  Urs Schaltegger  Hans Friedrichsen 《Lithos》2003,67(3-4):205-226

The Bandombaai Complex (southern Kaoko Belt, Namibia) consists of three main intrusive rock types including metaluminous hornblende- and sphene-bearing quartz diorites, allanite-bearing granodiorites and granites, and peraluminous garnet- and muscovite-bearing leucogranites. Intrusion of the quartz diorites is constrained by a U–Pb zircon age of 540±3 Ma.

Quartz diorites, granodiorites and granites display heterogeneous initial Nd- and O isotope compositions (_{Nd (540 Ma)}=−6.3 to −19.8; δ¹⁸O=9.0–11.6‰) but rather low and uniform initial Sr isotope compositions (⁸⁷Sr/⁸⁶Sr_initial=0.70794–0.70982). Two leucogranites and one aplite have higher initial ⁸⁷Sr/⁸⁶Sr ratios (0.70828–0.71559), but similar initial _Nd (−11.9 to −15.8) and oxygen isotope values (10.5–12.9‰). The geochemical and isotopic characteristics of the Bandombaai Complex are distinct from other granitoids of the Kaoko Belt and the Central Zone of the Damara orogen. Our study suggests that the quartz diorites of the Bandombaai Complex are generated by melting of heterogeneous mafic lower crust. Based on a comparison with results from amphibolite-dehydration melting experiments, a lower crustal garnet- and amphibole-bearing metabasalt, probably enriched in K₂O, is a likely source rock for the quartz diorites. The granodiorites/granites show low Rb/Sr (<0.6) ratios and are probably generated by partial melting of meta-igneous (intermediate) lower crustal sources by amphibole-dehydration melting. Most of the leucogranites display higher Rb/Sr ratios (>1) and are most likely generated by biotite-dehydration melting of heterogeneous felsic lower crust. All segments of the lower crust underwent partial melting during the Pan-African orogeny at a time (540 Ma) when the middle crust of the central Damara orogen also underwent high T, medium P regional metamorphism and melting. Geochemical and isotope data from the Bandombaai Complex suggest that the Pan-African orogeny in this part of the orogen was not a major crust-forming episode. Instead, even the most primitive rock types of the region, the quartz diorites, represent recycled lower crustal material.  相似文献   

The origin of organic matter in the solar system: evidence from the interplanetary dust particles     

G.J Flynn  L.P Keller  S Wirick 《Geochimica et cosmochimica acta》2003,67(24):4791-4806

The detailed examination of meteorites and interplanetary dust particles provides an opportunity to infer the origin of the organic matter found in primitive Solar System materials. If this organic matter were produced by aqueous alteration of elemental (graphitic or amorphous) carbon on an asteroid, then we would expect to see the organic matter occurring preferentially in interplanetary materials that exhibit evidence of aqueous activity, such as the presence of hydrated silicates. On the other hand, if the organic matter were produced either during the nebula phase of Solar System evolution or in the interstellar medium, we might expect this organic matter to be incorporated into the dust as it formed. In that case pre-biotic organic matter would be present in both the anhydrous and the hydrated interplanetary materials. We have performed carbon X-ray absorption near-edge structure spectroscopy and infrared spectroscopy on primitive anhydrous and hydrated interplanetary dust particles (IDPs) collected by NASA from the Earth's stratosphere. We find that organic matter is present in similar types and abundances in both the anhydrous and the hydrated IDPs, and, in the anhydrous IDPs some of this organic matter is the “glue” that holds grains together. These measurements provide the first direct, experimental evidence from the comparison of extraterrestrial samples that the bulk of the pre-biotic organic matter occurs in similar types and abundances in both hydrated and anhydrous samples. This indicates that the bulk of the pre-biotic organic matter in the Solar System did not form by aqueous processing, but, instead, had already formed at the time that primitive, anhydrous dust was being assembled. Thus, the bulk of the pre-biotic organic matter in the Solar System was formed by non-aqueous processing, occurring in either the Solar nebula or in an interstellar environment. Aqueous processing on asteroids may have altered this pre-existing organic matter, but such processing did not affect in any substantial way the C=O content of the organic matter, the aliphatic C-H abundance, or the mean aliphatic chain length.  相似文献   

Low-frequency 3-D seismic survey of upper crustal magmatic intrusions in the northeastern Pannonian basin of Hungary     

Zoltn Hajnal  Endre Heged&#x;s  G. Randy Keller  Tams Fancsik  Attila Cs. Kovcs  Rbert Csabafi 《Tectonophysics》2004,388(1-4):239

A specially designed 700-km² grid survey, deploying 1000 regularly distributed low-frequency seismic recording systems, successfully investigated one of the most complex geologic environments of the Pannonian basin. The wide-angle signals penetrated through over 1000 m of multi-phase igneous lithology and recognized, for the first time, the underlying enigmatic Permian to Early Triassic basement rocks. Tomographic inversion of the first arrival grid data resulted in determination of an accurate three-dimensional (3-D) velocity field, to a depth of 4 km. The anomalous changes of the spatial velocity data outline the regional extent of the Late Miocene magmatic intrusions, which are covered by over 2000 m of Mid-Miocene to Pleistocene clastics. Complex relationship was found between the surface potential data and the intrusive bodies. This multi-faceted geophysical data analysis established a functional technique for mapping a subsurface with intricate acoustic and structural complexity.  相似文献   

Effect of melt composition on the partitioning of trace elements between titanite and silicate melt   总被引：7，自引：0，他引：7  

Stefan Prowatke  Stephan Klemme 《Geochimica et cosmochimica acta》2005,69(3):695-709

Isobaric and isothermal experiments were performed to investigate the effect of melt composition on the partitioning of trace elements between titanite (CaTiSiO₅) and a range of different silicate melts. Titanite-melt partition coefficients for 18 trace elements were determined by secondary ion mass spectrometry (SIMS) analyses of experimental run products. The partition coefficients for the rare earth elements and for Th, Nb, and Ta reveal a strong influence of melt composition on partition coefficients, whereas partition coefficients for other studied monovalent, divalent and most quadrivalent (i.e., Zr, Hf) cations are not significantly affected by melt composition. The present data show that the influence of melt composition may not be neglected when modelling trace element partitioning.It is argued that it is mainly the change of coordination number and the regularity of the coordination space of trace elements in the melt structure that controls partition coefficients in our experiments. Furthermore, our data also show that the substitution mechanism by which trace elements are incorporated into titanite crystals may be of additional importance in this context.  相似文献