Analytical solutions of one‐dimensional infiltration before and after ponding     

Jiann‐Mou Chen  Yih‐Chi Tan  Chu‐Hui Chen 《水文研究》2003,17(4):815-822

This paper is a continuation of previous research, which obtained a convenient solution for arbitrary surface fluxes before ponding. By means of Fourier Transformation this has been extended to derive analytical solutions of a linearized Richards' equation for arbitrary input fluxes after surface saturation. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Peak metamorphic temperatures in type 6 ordinary chondrites: An evaluation of pyroxene and plagioclase geothermometry     

Valerie SLATER‐REYNOLDS  Harry Y. McSWEEN 《Meteoritics & planetary science》2005,40(5):745-754

Abstract— Quantifying the peak temperatures achieved during metamorphism is critical for understanding the thermal histories of ordinary chondrite parent bodies. Various geothermometers have been used to estimate equilibration temperatures for chondrites of the highest metamorphic grade (type 6), but results are inconsistent and span hundreds of degrees. Because different geothermometers and calibration models were used with different meteorites, it is unclear whether variations in peak temperatures represent actual ranges of metamorphic conditions within type 6 chondrites or differences in model calibrations. We addressed this problem by performing twopyroxene geothermometry, using QUILF95, on the same type 6 chondrites for which peak temperatures were estimated using the plagioclase geothermometer (Nakamuta and Motomura 1999). We also calculated temperatures for published pyroxene analyses from other type 6 H, L, and LL chondrites to determine the most representative peak metamorphic temperatures for ordinary chondrites. Pyroxenes record a narrow, overlapping range of temperatures in H6 (865–926 °C), L6 (812–934 °C), and LL6 (874–945 °C) chondrites. Plagioclase temperature estimates are 96–179 °C lower than pyroxenes in the same type 6 meteorites. Plagioclase estimates may not reflect peak metamorphic temperatures because chondrule glass probably recrystallized to plagioclase prior to reaching the metamorphic peak. The average temperature for H, L, and LL chondrites (～900 °C), which agrees with previously published oxygen isotope geothermometry, is at least 50 °C lower than the peak temperatures used in current asteroid thermal evolution models. This difference may require minor adjustments to thermal model calculations.  相似文献   

A constraint on boundary data for magnetic solenoidality in MHD calculations   总被引：1，自引：0，他引：1  

Tyan Yeh  Murray Dryer 《Astrophysics and Space Science》1985,117(1):165-171

  相似文献   

Palaeoenvironmental significance of Late Permian palaeosols in the South‐Eastern Iberian Ranges,Spain     

RAÚL DE LA HORRA  Ma ISABEL BENITO  JOSE LÓPEZ‐GÓMEZ  ALFREDO ARCHE  JOSÉ F. BARRENECHEA  JAVIER LUQUE 《Sedimentology》2008,55(6):1849-1873

The Late Permian (Wuchiapingian) Alcotas Formation in the SE Iberian Ranges consists of one red alluvial succession where abundant soil profiles developed. Detailed petrographical and sedimentological studies in seven sections of the Alcotas Formation allow six different types of palaeosols, with distinctive characteristics and different palaeogeographical distribution, to be distinguished throughout the South‐eastern Iberian Basin. These characteristics are, in turn, related to topographic, climatic and tectonic controls. The vertical distribution of the palaeosols is used to differentiate the formation in three parts from bottom to top showing both drastic and gradual vertical upwards palaeoenvironmental changes in the sections. Reconstruction of palaeoenvironmental conditions based on palaeosols provides evidence for understanding the events that occurred during the Late Permian, some few millions of years before the well‐known Permian‐Triassic global crisis.  相似文献   

Methane‐related microbial gypsum calcitization in stromatolites of a marine evaporative setting (Münder Formation,Upper Jurassic,Hils Syncline,north Germany)     

GERNOT ARP  CHRISTIAN OSTERTAG‐HENNING  SELÇÜK YÜCEKENT  JOACHIM REITNER  VOLKER THIEL 《Sedimentology》2008,55(5):1227-1251

Fossil stromatolites may reveal information about their hydrochemical palaeoenvironment, provided that assignment to a specific microbial community and a corresponding biogeochemical mechanism of formation can be made. Tithonian stromatolites of the Münder Formation at Thüste, north Germany, have traditionally been considered as formed by intertidal cyanobacterial communities. However, thin sections of the stromatolites show elongated angular traces of former gypsum crystals in a dense arrangement, but no algal or cyanobacterial filament traces. Moreover, high Fe²⁺ and Mn²⁺ contents, oxygen‐isotope and sulphur‐isotope ratios of carbonate‐bound sulphates, and sulphurized hydrocarbon biomarkers of the stromatolitic carbonate indicate that CaCO₃ precipitation occurred near the oxic–anoxic interface as a result of intensive bacterial sulphur cycling rather than photosynthetic activity. Furthermore, anaerobic oxidation of methane by Archaea may have driven CaCO₃ precipitation in deeper parts of the biofilm community, as reflected by high concentrations of squalane with a strongly negative δ¹³C in conjunction with evaporite pseudomorphs showing extremely low δ¹³C_Carb ratios. Consequently, the Thüste stromatolites are now interpreted as having initially formed by gypsum impregnation of biofilms. Subsequently, early Mg‐calcitic calcitization within the biofilms occurred because of combined bacterial iron, manganese and sulphate reduction, with an increasing contribution of anaerobic oxidation of methane with depth. This model plausibly explains the prominent preservation of signals derived from oxygen‐independent metabolic pathways, whereas virtually no geochemical record exists for an aerobic community that may, nevertheless, have prevailed at the stromatolite surface. Photic‐zone stromatolites with a prominent signal of anaerobic oxidation of methane may be common in, and indicative of, oxygen‐depleted sulphate‐bearing environments with high rates of methane production, conditions that possibly were fulfilled at the Archaean to Proterozoic transition.  相似文献   

数字矿床模型研究与系统实现     

何凯涛  王勇毅  丁建华  赵汀 《矿床地质》2008,27(1):113-119

数字矿床模型(DDM)是传统矿床模型的数字化.本文论述了数字矿床模型的概念,提出了其主要组成结构和建模关键技术.在吸收国内外地质领域专家系统建立的经验基础上,将人工智能技术与地理信息技术(WebGIS)相结合,通过构建矿床模型知识库,建立数字矿床模型推理网络结构,并以斑岩型铜矿为例论述了建立数字矿床模型的系统过程.本文是"十一五"期间国家高技术研究发展(863)计划的阶段成果.  相似文献   

广西大厂拉么锌铜多金属矿床成岩成矿作用年代学研究   总被引：20，自引：1，他引：19  

李华芹  王登红  梅玉萍  梁婷  陈振宇  郭春丽  应立娟 《地质学报》2008,82(7):912-2008-01-30

本文对广西大厂矿田拉么矿区内出露的酸性侵入岩和矿石进行了精细的年代学研究,分别获得龙箱盖含斑黑云母花岗岩锆石原位SHRIMP UPb和全岩RbSr等时线年龄为94±4Ma（95%可信度）和98.6±1.9Ma（95%可信度）,矽卡岩成矿期锌铜矿石中石英矿物RbSr等时线年龄为98.6±6Ma（95%可信度）。上述测定结果表明,拉么锌铜多金属矿床的成矿年龄与相关岩体的成岩年龄接近,均形成于早白垩世晚期。  相似文献   

Estimation of groundwater recharge using the soil moisture budget method and the base-flow model     

Cheng-Haw Lee  Hsin-Fu Yeh  Jin-Fa Chen 《Environmental Geology》2008,53(8):1787-1797

A detailed characterization of the site is crucial to designing an efficient method of managing the risks associated with tailings from abandoned mines. Therefore, samples collected from various depths within tailings in Guryong mine, Korea, were analyzed for their chemical, physical and mineralogical characteristics. All samples of the Guryong tailings had acid-generating potential. However, in the oxidation zone, the net acid generation (NAG) was low (30 kg H₂SO₄ t⁻¹) although the acid neutralization potential (ANP) was less than zero. The ANP values in the unoxidation zone were higher (> −56.0 kg CaCO₃ t⁻¹) than in the other zones. As a result, the amount of alkali ions that are needed to neutralize the acid needs to be considered. In this experiment G3, G4 and G6 drill cores containing fine tailings particles near the unoxidation zone were observed to contain calcite (CaCO₃) with acid-neutralizing capacity. A low pH (2−4) in the oxidation zone of the tailings changed to a neutral pH in the unoxidation zone of the tailings. These results suggest that the acid-neutralizing capacity of the tailings was controlled by particle and mineral composition of tailings.  相似文献   

DEM analysis of the crack propagation in brittle clays under uniaxial compression tests   总被引：2，自引：0，他引：2  

Luis F. Vesga  Luis E. Vallejo  Sebastian Lobo‐Guerrero 《国际地质力学数值与分析法杂志》2008,32(11):1405-1415

  相似文献   

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method   总被引：2，自引：0，他引：2  

S.‐H. Chen  X.‐M. Feng  S. Isam 《国际地质力学数值与分析法杂志》2008,32(12):1459-1477

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献