Development of Long-period Ground Motions from the Nankai Trough, Japan, Earthquakes: Observations and Computer Simulation of the 1944 Tonankai (Mw 8.1) and the 2004 SE Off-Kii Peninsula (Mw 7.4) Earthquakes     

Takashi Furumura  Toshihiko Hayakawa  Misao Nakamura  Kazuki Koketsu  Toshitaka Baba 《Pure and Applied Geophysics》2008,165(3-4):585-607

Strong ground motions recorded in central Tokyo during the 1944 Tonankai Mw8.1 earthquake occurring in the Nankai Trough demonstrate significant developments of very large (>10 cm) and prolonged (>10 min) shaking of long-period (T > 10–12 s) ground motions in the basin of Tokyo located over 400 km from the epicenter. In order to understand the process by which such long-period ground motions developed in central Tokyo and to mitigate possible future disasters arising from large earthquakes in the Nankai Trough, we analyzed waveform data from a dense nation wide strong-motion network (K-NET and KiK-net) deployed across Japan for the recent SE Off-Kii Peninsula (Mw 7.4) earthquake of 5 September 2004 that occurred in the Nankai Trough. The observational data and a corresponding computer simulation for the earthquake clearly demonstrate that such long-period ground motion is primarily developed as the wave propagating along the Nankai Trough due to the amplification and directional guidance of long-period surface waves within a thick sedimentary layer overlaid upon the shallowly descending Philippine Sea Plate below the Japanese Island. Then the significant resonance of the seismic waves within the thick cover of sedimentary rocks of the Kanto Basin developed large and prolonged long-period motions in the center of Tokyo. The simulation results and observed seismograms are in good agreement in terms of the main features of the long-period ground motions. Accordingly, we consider that the simulation model is capable of predicting the long-period ground motions that are expected to occur during future Nankai Trough M 8 earthquakes.  相似文献   

Bottom currents in Nankai Trough and Sagami Trough   总被引：1，自引：0，他引：1  

Keisuke Taira  Toshihiko Teramoto 《Journal of Oceanography》1985,41(6):388-398

Mean flows and velocity fluctuations are described from direct measurements of bottom currents made at three stations across Nankai Trough and two stations in Sagami Trough from May 1982 to May 1984. Aanderaa current meters were moored 7 m above the bottom. The observed mean flows indicate a counter-clockwise circulation in Nankai Trough with current speeds of 0.9–2.1 cm sec^–1. The mean flows were larger on the slopes than on the flat bottom of the trough. The mean flows observed in Sagami Trough show an inflow into Sagami Bay which is considered to be a part of the Oyashio undercurrent from the north that flows along the eastern coast of Honshu. Velocity fluctuations with periods greater than 100 hr were less energetic in the troughs than those at a station west of Hachijo-jima Island. A highly energetic fluctuation with a period of 66.7 hr was observed on the northern slope of Sagami Trough in the velocity component parallel to the trough axis. A maximum current speed of 49 cm sec^–1 was observed in Sagami Trough.This study was sponsored by the Ministry of Education, Science and Culture, Japan.  相似文献   

Simple DEM-Based Methods to Delineate Channel Networks for Hydrogeomorphological Mapping     

Kohei Matsunaga  Tomoki Nakaya  Toshihiko Sugai 《Transactions in GIS》2009,13(1):87-103

To delineate channel networks from DEMs regardless of landform type, this article proposes a new method using slope-weighted flow accumulation. To validate the method, SRTM-3, a global DEM dataset with a resolution of approximately 90 m, was used for analysis of the Loess Plateau, China. Channel networks delineated with and without slope-weighted flow accumulation were derived in both uplands and hilly lands for comparison. In the weighted flow accumulation method, the thresholds for delineating the channels were defined by detecting a turning point in the frequency distribution of the weighted flow accumulation function or by visual similarity with drainage channels extracted from topographic maps. The channel networks delineated with weighting showed closer correlation with a topographic map than the channel networks without weighting, despite the differences in thresholds. Moreover, the channel networks delineated with weighting represented the differences between landform types, while the channel networks without weighting did not. Weighting on the basis of the slope angle shows promise as a general channel delineation method which reflects the actual topography due to its hydrogeomorphological functions.  相似文献   

High-Reflectivity Coatings for a Vacuum Ultraviolet Spectropolarimeter     

Noriyuki Narukage  Masahito Kubo  Ryohko Ishikawa  Shin-nosuke Ishikawa  Yukio Katsukawa  Toshihiko Kobiki  Gabriel Giono  Ryouhei Kano  Takamasa Bando  Saku Tsuneta  Frédéric Auchère  Ken Kobayashi  Amy Winebarger  Jim McCandless  Jianrong Chen  Joanne Choi 《Solar physics》2017,292(3):40

Precise polarization measurements in the vacuum ultraviolet (VUV) region are expected to be a new tool for inferring the magnetic fields in the upper atmosphere of the Sun. High-reflectivity coatings are key elements to achieving high-throughput optics for precise polarization measurements. We fabricated three types of high-reflectivity coatings for a solar spectropolarimeter in the hydrogen Lyman-\(\upalpha \) (Ly\(\upalpha \); 121.567 nm) region and evaluated their performance. The first high-reflectivity mirror coating offers a reflectivity of more than 80 % in Ly\(\upalpha \) optics. The second is a reflective narrow-band filter coating that has a peak reflectivity of 57 % in Ly\(\upalpha \), whereas its reflectivity in the visible light range is lower than 1/10 of the peak reflectivity (\(\sim 5~\%\) on average). This coating can be used to easily realize a visible light rejection system, which is indispensable for a solar telescope, while maintaining high throughput in the Ly\(\upalpha \) line. The third is a high-efficiency reflective polarizing coating that almost exclusively reflects an s-polarized beam at its Brewster angle of 68° with a reflectivity of 55 %. This coating achieves both high polarizing power and high throughput. These coatings contributed to the high-throughput solar VUV spectropolarimeter called the Chromospheric Lyman-Alpha SpectroPolarimeter (CLASP), which was launched on 3 September, 2015.  相似文献   

In situ observation of penetration process in silica aerogel: Deceleration mechanism of hard spherical projectiles     

Rei Niimi  Toshihiko Kadono 《Icarus》2011,211(2):986-992

A large number of cometary dust particles were captured with low-density silica aerogels by NASA’s Stardust Mission. Knowledge of the details of the capture mechanism of hypervelocity particles in silica aerogel is needed in order to correctly derive the original particle features from impact tracks. However, the mechanism has not been fully understood yet. We shot hard spherical projectiles of several different materials into silica aerogel of density 60 mg cm⁻³ and observed their penetration processes using an image converter or a high-speed video camera. In order to observe the deceleration of projectiles clearly, we carried out impact experiments at two velocity ranges; ∼4 km s⁻¹ and ∼200 m s⁻¹. From the movies we took, it was indicated that the projectiles were decelerated by hydrodynamic force which was proportional to v² (v: projectile velocity) during the faster penetration process (∼4 km s⁻¹) and they were merely overcoming the aerogel crushing strength during the slower penetration process (∼200 m s⁻¹). We applied these deceleration mechanisms for whole capture process to calculate the track length. Our model well explains the track length in the experimental data set by Burchell et al. (Burchell, M.J., Creighton, J.A., Cole, M.J., Mann, J., Kearsley, A.T. [2001]. Meteorit. Planet. Sci. 36, 209-221).  相似文献   

Contamination status and spatial distribution of organochlorine compounds in fishes from Nansei Islands, Japan     

Malarvannan G  Takahashi S  Ikemoto T  Isobe T  Kunisue T  Sudaryanto A  Miyagi T  Nakamura M  Yasumura S  Tanabe S 《Marine pollution bulletin》2011,63(5-12):541-547

Two species of fishes (n=52; tilapia and mullet) from industrialized and urbanized areas of Okinawa Island (Manko-Noha river, Hija river and Shikaza river) and from a remote area of Ishigaki Island (Anparu mudflat), Japan were collected between August 2005 and July 2006, and analyzed for five organochlorine compounds (OCs), viz., DDTs, PCBs, CHLs, HCHs and HCB. Concentrations and the contamination patterns of OCs in fishes varied between locations. Considerable residue levels of OCs, especially CHLs and DDTs were found in both fishes from the main Okinawa Island. These levels were relatively higher than the reported values for seafood from Japanese coasts, indicating that even now pollution sources of these contaminants still exist in this region. On the other hand, lower concentrations of OCs were detected in fishes from Ishigaki Island waters than those of other Japanese coastal waters, suggesting that this region is less contaminated by OC contaminants.  相似文献   

New compact ocean bottom cabled seismometer system deployed in the Japan Sea     

Masanao Shinohara  Toshihiko Kanazawa  Tomoaki Yamada  Yuya Machida  Takashi Shinbo  Shin’ichi Sakai 《Marine Geophysical Researches》2014,35(3):231-242

The Japanese islands are positioned near the subduction zones, and large earthquakes have repeatedly occurred in marine areas around Japan. However, the number of permanent earthquake observatories in the oceans is quite limited. It is important for understanding generation of large earthquakes to observe seismic activities on the seafloor just above these seismogenic zones. An ocean bottom cabled seismometer (OBCS) is the best solution because data can be collected in real-time. We have developed a new compact OBCS system. A developed system is controlled by a microprocessor, and signals from accelerometers are 24-bit digitized. Clock is delivered from the global positioning system receiver on a landing station using a simple dedicated line. Data collected at each cabled seismometer (CS) are transmitted using standard Internet Protocol to landing stations. The network configuration of the system adopts two dual methods. We installed the first practical OBCS system in the Japan Sea, where large earthquakes occurred in past. The first OBCS system has a total length of 25 km and 4 stations with 5 km interval. Installation was carried out in August 2010. The CSs and single armored optical submarine cable were buried 1 m below the seafloor to avoid a conflict with fishing activity. The data are stored on a landing station and sent to Earthquake Research Institute, University of Tokyo by using the Internet. After the installation, data are being collected continuously. According to burial of the CSs, seismic ambient noises are smaller than those observed on seafloor.  相似文献   

The brightest asymptotic giant branch stars in the Leo I dwarf spheroidal galaxy     

John Menzies  Michael Feast  Toshihiko Tanabé  Patricia Whitelock  Yoshikazu Nakada 《Monthly notices of the Royal Astronomical Society》2002,335(4):923-927

  相似文献   

Pulsation at the tip of the first giant branch?     

Yoshifusa Ita  Toshihiko Tanabé  Noriyuki Matsunaga  Yasushi Nakajima  Chie Nagashima  Takahiro Nagayama  Daisuke Kato  Mikio Kurita  Tetsuya Nagata  Shuji Sato  Motohide Tamura  Hidehiko Nakaya  Yoshikazu Nakada 《Monthly notices of the Royal Astronomical Society》2002,337(3):L31-L34

  相似文献   

The role of Fischer-Tropsch catalysis in the origin of methane-rich Titan     

Yasuhito Sekine  Seiji Sugita  Takashi Yamamoto  Toshihiko Kadono 《Icarus》2005,178(1):154-164

Fischer-Tropsch catalysis, which converts CO and H₂ into CH₄ on the surface of iron catalyst, has been proposed to produce the CH₄ on Titan during its formation process in a circum-planetary subnebula. However, Fischer-Tropsch reaction rate under the conditions of subnebula have not been measured quantitatively yet. In this study, we conduct laboratory experiments to determine CH₄ formation rate and also conduct theoretical calculation of clathrate formation to clarify the significance of Fischer-Tropsch catalysis in a subnebula. Our experimental result indicates that the range of conditions where Fischer-Tropsch catalysis proceeds efficiently is narrow (T∼500-600 K) in a subnebula because the catalysts are poisoned at temperatures above 600 K under the condition of subnebula (i.e., H₂/CO = 1000). This suggests that an entire subnebula may not become rich in CH₄ but rather that only limited region of a subnebula may enriched in CH₄ (i.e., CH₄-rich band formation). Our experimental result also suggests that both CO and CO₂ are converted into CH₄ within time significantly shorter than the lifetime of the solar nebula at the optimal temperatures around 550 K. The calculation result of clathration shows that CO₂-rich satellitesimals are formed in the catalytically inactive outer region of subnebula. In the catalytically active inner region, CH₄-rich satellitesimals are formed. The resulting CH₄-rich satellitesimals formed in this region play an important role in the origin of CH₄ on Titan. When our experimental data are applied to a high-pressure model for subnebula evolution, it would predict that there should be CO₂ underneath the Iapetus subsurface and no thick CO₂ ice layer on Titan's icy crust. Such surface and subsurface composition, which may be observed by Cassini-Huygens mission, would provide crucial information on the origin of icy satellites.  相似文献