Application of a multi‐temporal,LiDAR‐derived,digital terrain model in a landslide‐volume estimation     

Chih‐Ming Tseng  Ching‐Weei Lin  Colin P. Stark  Jin‐Kin Liu  Li‐Yuan Fei  Yu‐Chung Hsieh 《地球表面变化过程与地形》2013,38(13):1587-1601

Sediments produced by landslides are crucial in the sediment yield of a catchment, debris flow forecasting, and related hazard assessment. On a regional scale, however, it is difficult and time consuming to measure the volumes of such sediment. This paper uses a LiDAR‐derived digital terrain model (DTM) taken in 2005 and 2010 (at 2 m resolution) to accurately obtain landslide‐induced sediment volumes that resulted from a single catastrophic typhoon event in a heavily forested mountainous area of Taiwan. The landslides induced by Typhoon Morakot are mapped by comparison of 25 cm resolution aerial photographs taken before and after the typhoon in an 83.6 km² study area. Each landslide volume is calculated by subtraction of the 2005 DTM from the 2010 DTM, and the scaling relationship between landslide area and its volume are further regressed. The relationship between volume and area are also determined for all the disturbed areas (V_L = 0.452A_L^1.242) and for the crown areas of the landslides (V_L = 2.510A_L^1.206). The uncertainty in estimated volume caused by use of the LiDAR DTMs is discussed, and the error in absolute volume estimation for landslides with an area >10⁵ m² is within 20%. The volume–area relationship obtained in this study is also validated in 11 small to medium‐sized catchments located outside the study area, and there is good agreement between the calculation from DTMs and the regression formula. By comparison of debris volumes estimated in this study with previous work, it is found that a wider volume variation exists that is directly proportional to the landslide area, especially under a higher scaling exponent. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Adsorption of Complex Pollutants from Aqueous Solutions by Nanocomposite Materials     

Yeoung‐Sheng Wang  Shu‐Huei Hsieh  Chang‐Hung Lee  Jao‐Jia Horng 《洁净——土壤、空气、水》2013,41(6):574-580

In view of water pollutants becoming more complex, both anionic and cationic pollutants need to be removed. The multi‐pollutants simultaneous removal is paid more and more attention. Hence, development composite materials for treatment complex wastewater are the aim of this study. In this research, iron–nickel nanoparticles deposited onto aluminum oxide (α‐Al₂O₃) and carbon nanotubes (CNTs) to form nanocomposite materials Fe–Ni/Al₂O₃ and Fe–Ni/CNTs, respectively, were used as adsorbents. The adsorption capacities of Fe–Ni/Al₂O₃ and Fe–Ni/CNTs for AO7, HSeO, and Pb²⁺ were observed to be 5.46, 8.28, 27.02, and 25.6 mg/g, 15.29 and 17.12 mg/g, separately. The composite materials with negative charges were superior in adsorption of anionic pollutants. Using orthogonal experimental design and analysis of variance to co‐treat dye AO7, HSeO and Pb²⁺ in aqueous solutions, seven testing factors were included: (1) adsorbent types, (2) amount of iron, (3) solution pHs, (4) AO7 concentrations, (5) Pb²⁺ concentrations, (6) HSeO concentrations and (7) reaction time. The experimental results showed that the removal of complex pollutants AO7, HSeO, and Pb²⁺ on Fe–Ni/CNTs could reach up to 90% in the optimal treatment conditions. When using Fe–Ni/CNTs as the adsorbent, the sorption isothermals were well fitted in the Freundlich isotherm, and R² could reach up to 0.98.  相似文献   

Two episodes of the Indosinian thermal event on the South China Block: Constraints from LA-ICPMS U–Pb zircon and electron microprobe monazite ages of the Darongshan S-type granitic suite     

Cheng-Hong Chen  Pei-Shan Hsieh  Chi-Yu Lee  Han-Wen Zhou 《Gondwana Research》2011,19(4):1008-1023

The Darongshan granitic suite (~ 10,000 km²) consists of five major units (Taima, Nadong and Jiuzhou plutons, and Pubei and Darongshan batholiths) typical of peraluminous S-type granitoids containing abundant granulite inclusions in the Cathaysia block, South China. Six samples from these plutons and batholiths have been investigated using both LA-ICPMS U–Pb age dating on zircon cores and EMP U–Th–Pb chemical age dating on monazite cores and rims. LA-ICPMS zircon results give similar major age populations ranging between 260 ± 3 and 250 ± 3 Ma for all units, with apparent older age peaks concentrated at 1020, 800, 430 and 330 Ma. On the other hand, EMP monazite results yield younger ages of 231–229 Ma for Nadong, Taima, Pubei and Darongshan and 224 Ma for Jiuzhou samples, with older age groups of 264 Ma for Taima and 256–250 Ma for Pubei units. Since the older monazite ages are similar to the majority of zircon ages, the latter are considered as inherited ages. Further because such zircon ages are similar with the emplacement time of the Emeishan large igneous province in western South China, they likely reflect the timing of metamorphism for the included fragments of granulitic crusts that had been formed by invasion of the Emeishan plume. The younger monazite ages, as present for all plutons and batholiths in the entire Darongshan area, are taken as the formation age of the host granites. Combining U–Pb zircon and EMP monazite ages known for Permo-Triassic high temperature and high pressure metamorphic rocks and granites in the Indochina block (e.g., the Kannack Complex of the Kontum massif), it is suggested that the Indosinian thermal activity had set records over both the Indochina (plus Simao) and South China blocks in two main episodes, one is 260–250 Ma and the other is 231–229 Ma. One plausible explanation is that these two blocks were one united continent before the Emeishan plume activity and an opening was triggered by this plume at ~ 260 Ma. Due to forces of the approaching Sibumasu block, both the South China and Indochina blocks were amalgamated again at ~ 230 Ma. We, therefore, advocate that double subduction of the plume-triggered oceanic crusts in opposite directions is responsible for the generation of the Darongshan granitic suite in the South China block and its counterpart in the Indochina block.  相似文献   

Characterization of high molecular weight biomarkers in crude oils     

Michael Hsieh  R. Paul Philp  J. C. del Rio 《Organic Geochemistry》2000,31(12):794

High-temperature gas chromatography (HTGC) has enhanced our ability to characterize hydrocarbons extending to C₁₂₀ in crude oils. As a result, hydrocarbons in waxes (> C₂₀) have been observed to vary significantly between crude oils, even those presumed to originate from the same source. Prior to this development, microcrystalline waxes containing hydrocarbons above C₄₀ were not characterized on a molecular level due to the analytical limitations of conventional gas chromatography. Routine screenings of high pour-point crude oils by high-temperature gas chromatography has revealed that high molecular weight hydrocarbons (> C₄₀) are very common in most oils and may represent 2% of the crude oil. Precise structures, origins, and significance of these high molecular weight compounds remain elusive. As a preliminary step to expand our knowledge of these compounds their general molecular structures and formulas have been investigated in this study. Initial results suggest that the major high molecular weight compounds include a homologous series of n-alkanes, methylbranched alkanes, alkylcyclopentanes, alkylcyclohexanes, alkylbenzenes and alkylcycloalkanes.  相似文献   

Generation of Late Cretaceous silicic rocks in SE China: Age, major element and numerical simulation constraints   总被引：2，自引：0，他引：2  

Cheng-Hong Chen  Chi-Yu Lee  Hsueh-Yu Lu  Pei-Shan Hsieh 《Journal of Asian Earth Sciences》2008,31(4-6):479-498

Rhyolite-dominating bimodal volcanic suites (rhyolite/basalt), mafic dikes and A-type granites distribute from N Zhejiang to S Fujian over 800 km in the Southeast Coast Magmatic Belt (SCMB) – the Late Yanshanian (LY) orogenic belt in SE China. Data of ⁴⁰Ar/³⁹Ar and K–Ar whole-rock ages and LA-ICPMS U–Pb zircon ages indicate that rhyolitic volcanism (101–72 Ma) is contemporaneous with the A-type granitic intrusions (100–90 Ma) and mafic dike injections (94–77 Ma). This time span is used to define the upper volcanic series in Zhejiang–Fujian areas. One striking feature of rhyolites in the SCMB is that many are strongly peraluminous (SP) and others, mostly restrict in Fujian, are peralkaline to mildly peraluminous (P-MP) and chemically resemble A-type granites. The SP character is unique among well-known large rhyolite provinces worldwide. Based on experimental works for a common thermal regime and inherited zircon age information, we suggest that SP and P-MP rhyolites represent low pressure melting of the felsic (quartzofeldspathic) granite (±metapelite) and the accompanied granodioritic, tonalitic and trondhjemitic member of the core complex assemblage, respectively, to account for the decreasing aluminosity. They could have also been contaminated by young igneous rocks, and ancient crust to a lesser degree, during ascent to the surface. Plate subduction and lithosphere extension processes, respectively, are numerically simulated for the magma generation of these rhyolites using the mafic underplating model. Results suggest that the most effective controlling factor to generate SP and associated P-MP (A-type) magmas during 95–80 Ma is thinning of the lithosphere thickness with a high exhumation rate. Under this circumstance, the core complex assemblage can be uplifted to lower level of the crust and match the constraint of experimental works.  相似文献   

Prediction of nonstationary climatic series     

A. R. Rao  C. H. Hsieh  G. D. Jeong 《Theoretical and Applied Climatology》1992,46(2-3):75-87

Summary Most of the stochastic prediction methods are developed for stationary time series. However, many climatic series show clear evidence of non-stationarity. In such cases, methods based on the stationarity assumptions would be inappropriate. Alternative methods such as those based on stochastic approximation are preferable in these cases because they are based on adaptive learning principles. These methods have not been applied and their suitability not tested with nonstationary climatic time series.In the stochastic approximation method, the deterministic component of a nonstationary time series is estimated by first predicting the two steps ahead value of a time series. The two steps-ahead forecast may involve a term characterizing the trend in the time series. The two steps-ahead predictor is corrected to obtain the one step ahead prediction by using a gain sequence.The dynamic stochastic approximation method is used herein to predict non-stationary climatic time series. Daily minimum temperature series at West Lafayette, Indiana, U.S.A. and seasonal temperature and precipitation series at Evansville, Indiana, U.S.A. are used in the study. For data trends, an improved dynamic stochastic approximation method, called the modified dynamic stochastic approximation method gives more accurate predictions. If the method is used for seasonal data, then it can be used to track the time varying mean value.With 6 Figures  相似文献   

Estimation of surface heat and momentum fluxes using the flux-variance method above uniform and non-uniform terrain   总被引：4，自引：0，他引：4  

Gabriel Katul  Stewart M. Goltz  Cheng-I Hsieh  Yung Cheng  Fred Mowry  John Sigmon 《Boundary-Layer Meteorology》1995,74(3):237-260

Eddy-correlation measurements above an uneven-aged forest, a uniform-irrigated bare soil field, and within a grass-covered forest clearing were used to investigate the usefulness of the fluxvariance method above uniform and non-uniform terrain. For this purpose, the Monin and Obukhov (1954) variance similarity functions were compared with direct measurements. Such comparisons were in close agreement for momentum and heat but not for water vapor. Deviations between measured and predicted similarity functions for water vapor were attributed to three factors: 1) the active role of temperature in surface-layer turbulence, 2) dissimilarity between sources and sinks of heat and water vapor at the ground surface, and 3) the non-uniformity in water vapor sources and sinks. It was demonstrated that the latter non-uniformity contributed to horizontal gradients that do not scale with the vertical flux. These three factors resulted in a turbulence regime that appeared more efficient in transporting heat than water vapor for the dynamic convective sublayer but not for the dynamic sublayer. The agreement between eddy-correlation measured and flux-variance predicted sensible heat flux was better than that for latent heat flux at all three sites. The flux-variance method systematically overestimated the latent heat flux when compared to eddy-correlation measurements. It was demonstrated that the non-uniformity in water vapor sources reduced the surface flux when compared to an equivalent uniform terrain subjected to identical shear stress, sensible heat flux, and atmospheric water vapor variance. Finally, the correlation between the temperature and water vapor fluctuations was related to the relative efficiency of surface-layer turbulence in removing heat and water vapor. These relations were used to assess critical assumptions in the derivation of the flux-variance formulation.  相似文献   

Latent and sensible heat flux predictions from a uniform pine forest using surface renewal and flux variance methods   总被引：1，自引：0，他引：1  

Gabriel Katul  Cheng-I Hsieh  Ram Oren  David Ellsworth  Nathan Phillips 《Boundary-Layer Meteorology》1996,80(3):249-282

A surface renewal model that links organized eddy motion to the latent and sensible heat fluxes is tested with eddy correlation measurements carried out in a 13m tall uniform Loblolly pine plantation in Duke Forest, Durham, North Carolina. The surface renewal model is based on the occurance of ramp-like patterns in the scalar concentration measurements. To extract such ramp-like patterns from Eulerian scalar concentration measurements, a newly proposed time-frequency filtering scheme is developed and tested. The time-domain filtering is carried out using compactly-supported orthonormal wavelets in conjunction with the Universal Wavelet Thresholding approach of Donoho and Johnstone, while the frequency filtering is carried out by a band-pass sine filter centered around the ramp-occurrence frequency as proposed by other studies. The method was separately tested for heat and water vapour with good agreement between eddy correlation flux measurements and model predictions. The usefulness of the flux-variance method to predict sensible and latent heat fluxes is also considered. Our measurements suggest that the simple flux-variance method reproduces the measured heat and momentum fluxes despite the fact that the variances were measured within the roughness sublayer and not in the surface layer. Central to the predictions of water vapour fluxes using the flux-variance approach is the similarity between heat and water vapour transport by the turbulent air flow. This assumption is also investigated for this uniform forest terrain.  相似文献   

Efficiency of excavations with buttress walls in reducing the deflection of the diaphragm wall     

Pio-Go Hsieh  Chang-Yu Ou  Wei-Han Hsieh 《Acta Geotechnica》2016,11(5):1087-1102

Installation of buttress walls against diaphragm walls has been used as an alternative measure for the protection of adjacent buildings during excavation, but their mechanism in reducing movements has not yet been fully understood. This study performs three-dimensional finite element analyses of two excavation case histories, one in clay with T-shape buttress walls and another in dominant sand with rectangular buttress walls, to establish analysis model. Then, a series of parametric study were performed by varying soil types, types and length of buttress walls based on the above-mentioned excavations. Results show that the mechanism of buttress walls in reducing wall deflections mainly came from the frictional resistance between the side surface of buttress wall and adjacent soil rather than from the combined bending stiffness from diaphragm and buttress walls. The buttress wall with a length <2.0 m had a poor effect in reducing the wall deflection because the soil adjacent to the buttress wall had almost the same amount of movement as the buttress wall, causing the frictional resistance little mobilized. Since the frictional resistance of buttress walls in a deep excavation has fully been mobilized prior to the final excavation depth, the efficiency of buttress walls in reducing the wall deflection in a deep excavation was much less than that in a shallow excavation. Rectangular shape of buttress walls was of a better effect than T-shape in the shallow excavation because frictional resistance between buttress walls and adjacent soil played a major role in reducing the wall deflection rather than bearing resistance of the flange. When the excavation went deeper, the difference in reducing the wall deflection between the R-shape and T-shape became small.  相似文献   

NOTE ON THE GEOMORPHOLOGY OF THE NORTH SHENSI BASIN     

謝家榮 《地质学报》1933,(0)

The geology of the north Shensi basin has been studied to some detail bythe American geologists Fuller,Clapp and others~1 in an oil exploration partysent out in 1914 under the joint auspices of the Chinese National Oil Administra-  相似文献