Potentials of alternate polarization of Envisat ASAR data in geological mapping — A case study in Kurnool Group of rocks,Andhra Pradesh     

Arindam Guha  K. Vinod Kumar  M. V. V. Kamaraju  K. Babu Govindharaj 《Journal of the Geological Society of India》2009,73(2):268-272

The application of SAR data is a proven technology in geological studies but very few accounts are available in India, which can evaluate and demonstrate the utility of microwave signatures as an important tool for geological mapping. In this connection, the significance of polarization is an important parameter in enhancing geological elements. Present study reveals that the simple polarization composite prepared from different polarization channels can significantly aid the delineation of geological features as demonstrated from the Proterozoic metasedimentary sequences of Kurnool Group. The polarization colour composites reveal that different sedimentary units can be differentiated on the basis of variable back scattering return in different polarization channel. Further geological structures of regional importance can also be delineated in these colour composite images. Comparative analysis of different composite images with published geological maps, illustrates the capabilities of the microwave polarization in enhancing geological elements and how they can be used in updating geological data.  相似文献   

Preface     

Vinod K. Gaur  Dhruba Mukhopadhyay 《Journal of Earth System Science》1997,106(4):181-183

  相似文献   

Geological and geomorphological studies of a part of Ganjam district,Orissa by remote sensing techniques     

J K Tripathy  R C Panigrahy  K Vinod Kumar 《Journal of the Indian Society of Remote Sensing》1996,24(3):169-177

Geological and geomorphological mapping was carried out for a part of Ganjam district, Orissa through visual interpretation of IRS-IB LISS II flase colour composites. Various lithounits such as khondalites, charnockites and granites of Archaean age were mapped. The study area is traversed by two sets of vertical joints — one trending in NE-SW direction and the other in NW-SE direction. Three sets of lineaments in the study area trending in NE-SW, NW-SE and ENE-WSW suggest that the study area was subject to very high degree of deformation in the past. Major geomorphic units delineated are, Hills, Pediments, Valley Fills, New Flood Plains, Old Flood Plains, New Coastal Plains and Old Coastal Plains. Different landforms under each geomorphic unit are also mapped.  相似文献   

Engineering behaviour of MICP treated marine clays     

K. Kannan  J. Bindu  P. Vinod 《Marine Georesources & Geotechnology》2020,38(7):761-769

Abstract

In the present scenario, with much focus on sustainable development worldwide, Microbially Induced Calcite Precipitation (MICP) is a promising biological soil improvement technology. However, only very limited research is reported on the effectiveness of this technique in marine clays. This paper presents the salient features of an experimental study conducted on two typical marine clays stabilised by MICP. Effectiveness of the technique was evaluated through a series of one-dimensional consolidation tests, unconfined compression tests, and index property determinations. It is found that biostimulation approach is not effective in marine clay; bio-augmentation is needed for soil improvement. Bio-augmentation results in the reduction of liquid limit and plasticity index to about 29% and 47%, respectively for the marine clays. A comparable improvement in volume change behaviour is also observed. There is a marked increase in undrained shear strength, upto about 148%, of MICP treated marine clays at toughness limit water content. Curing is also found to have a significant role in soil improvement. The observed transition in the nature of the tested marine clays from that of fat clay to elastic silt suggests the potential of the proposed approach. An empirical equation is also proposed to predict compression index of MICP treated marine clays.  相似文献   

A modified permeameter for determination of unsaturated coefficient of permeability   总被引：1，自引：0，他引：1  

Sai K. Vanapalli  Vinod K. Garga  Patrick Brisson 《Geotechnical and Geological Engineering》2007,25(2):191-202

The design details of a modified permeameter used for determining the unsaturated coefficient of permeability of tailings are presented in this Paper. This permeameter can accommodate a large tailings specimen, 200 × 200 × 400 mm high, and uses the Instantaneous Profile Method (IPM) to determine the variation of unsaturated coefficient of permeability with respect to soil suction using a single specimen. The soil-water characteristic curve data can also be simultaneously determined from the modified permeameter. The key design features in comparison to a conventional permeameter include the provision of adjustable sensors that move along with the tailings as it settles due to desaturation during the testing period. The advantages of using a modified permeameter in the determination of the coefficient of permeability of unsaturated tailings are also discussed in this paper. Tests were carried out by providing suction using hanging column technique in the suction range of 0–10 kPa. Such an apparatus can easily be modified to accommodate higher suction values.  相似文献   

Drinking water quality in villages of southwestern Haryana,India: assessing human health risks associated with hydrochemistry   总被引：1，自引：0，他引：1  

Vinod K. Garg  Surindra Suthar  Sushma Singh  Aleenjeet Sheoran  Garima  Meenakshi  Sandeep Jain 《Environmental Geology》2009,58(6):1329-1340

The chemical quality of groundwater of western Haryana, India was assessed for its suitability for drinking purposes. A total of 275 water samples were collected from deep aquifer based hand-pumps situated in 37 different villages/towns of Bhiwani region. The water samples were analyzed for different physico-chemical properties, e.g., pH, total dissolved solids (TDS), total harness (TH), total alkalinity (TA), calcium, magnesium, carbonate, bicarbonate, sulphate, chloride and fluoride concentrations. In this study, the average TDS content was greater ranging 1,692 (Bhiwani block) to 2,560 mg l⁻¹ (Siwani block), and other important parameters of water, e.g., TA (442–1,232 mg l⁻¹), TH (437–864 mg l⁻¹) and bicarbonate (554–672 mg l⁻¹), were also higher than maximum permissible limit by WHO or BIS. The fluoride appeared as a major problem of safe drinking water in this region. We recorded greater fluoride concentration, i.e., 86.0 mg l⁻¹ from Motipura village that is highest fluoride level ever recorded for Haryana state. The average fluoride concentration ranged between 7.1 and 0.8 mg l⁻¹ in different blocks of western Haryana. On the basis of fluoride concentration, Siwani block showed the maximum number of water samples (84% of total collected samples) unsuitable for drinking purposes (containing fluoride >1.5 mg l⁻¹) followed by Charki Dadri block (58%), Bhiwani block (52%), Bawani Khera block (33%) and Loharu block (14%). This study clearly suggest that some health deteriorating chemicals in drinking water were at dangerous level and; therefore, water quality could be a major health threat for local residents of western Haryana. The high fluoride level in drinking water has posed some serious dental health risks in local residents.  相似文献   

Sediment Yield Index mapping and prioritization of Madia subwatershed,Sagar District of Madhya Pradesh (India)     

Kishan Singh Rawat  Vinod Kumar Tripathi  Anil Kumar Mishra 《Arabian Journal of Geosciences》2014,7(8):3131-3145

Assessment of soil loss through Sediment Yield Index (SYI) is important for watershed planning, prioritization, and development. In the absence of measured sediment data, SYI expressing the relative sediment yield from different basins work as a basis for grading another basin to adopt erosion control measures. An attempt was made to evaluate SYI in wider scale by using cost-effective tools like remote sensing and geographical information system (GIS). SYI was calculated for Madia subwatershed, which consists of 29 microwatersheds and located in Sagar District, Madhya Pradesh (M.P.) The IRS LISS III data and Shuttle Radar Topography Mission (SRTM) digital elevation models (DEM) of 90-m resolution were used to identify land use characteristics and geomorphometric analysis. Major land use was observed as agricultural land (24.7 %), water bodies (16.7 %), forest area (10.2 %), and settlement (21.3 %). In categorization, similar overall accuracy was observed for dense forest, barren land, settlement, and water bodies. The highest SYI with a value more than 20 was observed in microwatershed Mw6, Mw7, and Mw24, which comprises 33 % of the total watershed area. It gives the information about the watershed area that requires very high priority.  相似文献   

Groundwater contamination in parts of Nalgonda district,Telangana, India as revealed by trace elemental studies     

D. Purushotham  D. Linga  Netramani Sagar  Sibasish Mishra  G. Naga Vinod  K. Venkatesham  K. Saikrishna 《Journal of the Geological Society of India》2017,90(4):447-458

The present paper deals with major and trace elements geochemistry of the groundwater from Nalgonda district, Telangana. The study area is very important in terms of anthropogenic activity like rapid industrial, urban development, pesticides, pharmaceutical, granite polishing and agro based industries. Inductively coupled plasma mass spectrometer (ICPMS) was employed to determine the concentration of trace elements in collected groundwater samples (bore well). These probe elements were further categorized as toxic elements (Pb, As, Cd, and V), alkaline earths (Sr and Ba), alkali metals (Li, Rb), transition metals (Cr, Mo and Ni), metallic elements (Cu, Fe, Zn, Al, Co), and other non-metallic elements (Se and Si). The groundwater quality was examined in perspective of Indian as well as World Health Organization drinking water standards. Based on the analytical results, groundwater in the study area is found to be slightly alkaline in nature and very hard, the average abundance of the major cations and anions is in the order of Ca⁺<Na⁺<Mg⁺<K⁺ and Cl^-<HCO₃ ^?<CO₃ ^?<SO₄ ^?<NO₃ ^?<F^– respectively. The dominant hydro chemical facies of groundwater is Na⁺ - HCO ₃ ^– – Cl^– and Na⁺ - Cl^– – HCO^– ₃ types.The results of trace elements shows that concentration of Pb, As, Cd, V in collected samples exceeding the desirable limits, and in the case of alkaline, alkali, transition, non-metallic elements, seventy per cent of the samples crossed the desirable limits, but all metallic elements viz. Cu, Fe, Zn, Al, Co is within the limits as per Indian as well as World Health Organizations drinking water standards. Factor analysis results shows that seven factors emerged as a significant contributor to the groundwater contamination is about 65.32 per cent. The spatial variation maps decipher trace elemental concentrations both geogenic and anthropogenic origin, by three zones i.e. ‘low’, ‘moderate’ and ‘high’ of the study area based on environment using Arc-GIS. High concentrations of trace elements are indicative of phenomenal rise in chemical composition and likely to have its origin from silicate weathering reactions and dissolution/precipitation processes supported by rainfall and anthropogenic activities, indiscriminate use of fertilizers/pesticides, and disposal of waste and sewage, release of reactive pollutants into the atmosphere by industries. Hence, this work is of immense societal benefit in terms of prevailing human health hazards in the study area with a direct relevance to such industrially populated regions elsewhere.  相似文献