Cold anticyclonic eddies formed from cold pool water in the southern Middle Atlantic Bight     

Charles N. Flagg  Douglas Wallace  Zbigniew Kolber 《Continental Shelf Research》1997,17(15):1839-1867

AVHRR satellite imagery of the southern Mid-Atlantic Bight during May 1993 revealed a large area of cold water over the shelf break and slope that appeared to spin up into a series of southward propagating anticyclonic eddies. The eddies had diameters of 35–45 km at the surface and moved southward at about 20 cm/sec. A radial TOYO CTD (to 50m) and ADCP velocity (to 400m) transect was conducted across the southern-most of these eddies. The upper 50 meters had minimum temperatures of less than 7°C and salinities of about 33 pss, characteristics similar to cold pool waters usually found over the continental shelf. ADCP velocity data from one of the eddies revealed anticyclonic flow extending to a depth of about 250m. The transport of cold pool water by the eddies was estimated to be 0.1 to 0.2 Sv which is of the same order as the annual mean alongshore transport of shelf water in this region. The origin of the deeper water within the eddy is unlikely to be the continental shelf because the shelf break is less than 100 m. The depth and velocity profiles along the TOYO transect were consistent with the constant potential vorticity eddy model of Flierl (1979) although the source of the eddy kinetic energy is uncertain. The cause for the exodus of cold pool water from the shelf, which extended northward to at least 38°N, is unclear but must involve the establishment of an alongshore baroclinic pressure gradient against the usual southwestward shelf flow. It is possible that the intrusion of Gulf Stream waters onto the shelf near Cape Hatteras was a precursor of this off shelf transport. The southern-most eddy was marked by high biological productivity and very high oxygen supersaturation. The phytoplankton bloom detected within the exported cold pool water, located over the continental slope, suggests a mechanism whereby production fueled by nutrients derived from the shelf can be locally exported into deep water.  相似文献   

    

Wallace H. MacLean 《Contributions to Mineralogy and Petrology》2004,146(6):779

  相似文献   

Reflections from Canada: a ‘nearest neighbour’ analysis     

Iain Wallace 《GeoJournal》2004,59(1):43-44

  相似文献   

A GIS Analysis to Evaluate Areas Suitable for Crushed Stone Aggregate Quarries in New England,USA     

Robinson  Gilpin R.  Kapo  Katherine E.  Raines  Gary L. 《Natural Resources Research》2004,13(3):143-159

Aggregate is a low unit-value mineral commodity. Costs to move aggregate from the mine site to the point of use is a large fraction of the resource cost to users. Production sites for aggregate occur where suitable source materials exist and where transportation and market conditions are favorable. The increasing demand for aggregate and the difficulty of developing and permitting new sites and of renewal of permits on existing sites of aggregate production indicates that aggregate will be supplied from sources yet to be developed or delineated in many areas. Site development and permitting for aggregate production is difficult because many land management plans and zoning actions fail to anticipate prospective source areas for aggregate in a way that is consistent with both the source rock quality and the transportation and socioeconomic factors that define the economic viability of the industry. Spatial analysis provides a method to integrate both geology and economic (transportation and marketplace) parameters in a regional model. Weights of evidence (WofE) analysis has been used to measure the spatial correlation of geologic map, transportation network, and population data with current production sites for crushed stone aggregate in the New England region of the northeastern United States. Weighted logistic regression (WLR) is used with the WofE results to rank areas in terms of their relative suitability for production of crushed stone. Spatial analysis indicates that 85% of the 106 crushed stone aggregate quarries in New England are sited within 1.6 km (1 mile) of either a principal highway or rail line in the region. Seventy-eight percent of crushed stone aggregate quarries are sited in census tracts with population densities exceeding 100 people/mile². These relations illustrate the importance of proximity to both transportation corridors and developing areas where aggregate is predominately used. Only one active crushed stone quarry is located in a census tract with a population density less than 15 people/mile², reflecting the lack of sufficient market demand in many rural areas to develop an operation there. However, since 1990, almost all new quarries have been developed in census tracts with population densities less than 200 people/mile², indicating the difficulty of permitting new quarry sites in highly populated areas. Crushed stone aggregate is produced predominately from three hard rock types that are distributed widely in New England; 28% of sites use granitic rock, 25% use carbonate rocks, and 25% use mafic rock types that are categorized as trap rock by the aggregate industry. The other crushed stone aggregate sources include a variety of fine-grained metamorphic rock types. Carbonate rocks and Jurassic basalt (the primary trap rock source) are the most prevalent source rocks on an area-weighted basis. Spatial analysis can be used on a regional scale to rank areas by their relative suitabilityfor crushed stone aggregate production based on geology, transportation, and population parameters. The results of this regional analysis can identify areas for more detailed evaluation. As transportation or population features change, the model can be revised easily to reflect these changes.  相似文献   

Evaluating soil moisture estimation from ground-penetrating radar hyperbola fitting with respect to a systematic time-domain reflectometry data collection in a boreal podzolic agricultural field     

Chameera Illawathure  Gary Parkin  Sébastien Lambot  Lakshman Galagedara 《水文研究》2020,34(6):1428-1445

The upper 30 cm of the soil profile, which hosts the majority of the root biomass, can be considered as the shallow agricultural root zone of most temperate crops. The electromagnetic wave velocity in the soil obtained from reflection hyperbolas in ground-penetrating radar (GPR) data can be used to estimate soil moisture (SM). Finding shallow hyperbolas in a radargram and minimizing the subjective error associated with the hyperbola fitting are the main challenges in this approach. Nevertheless, we were motivated by the recent improvements of hyperbola fitting algorithms, which can reduce the subjective error and processing time. To overcome the difficulty of finding very shallow hyperbolas, we applied the hyperbola fitting method to reflections ranging from 27- to 50-cm depth using a 500-MHz centre-frequency GPR and compared the estimated moisture with vertically installed, 30-cm-long time-domain reflectometry (TDR) sensors. We also compared TDR and GPR sample areas in a 2-D plane using different GPR survey types and different hyperbola depths. SM measured with TDR and GPR were not significantly different according to Mann–Whitney's test. Our analyses showed that a root mean square error of 0.03 m³ m⁻³ was found between the two methods. In conclusion, the proposed method might be suitable to estimate SM with an acceptable accuracy within the root zone if the soil profile is fairly uniform within the application depth range.  相似文献   

Implications of measurement metrics on soil freezing curves: A simulation of freeze–thaw hysteresis     

Renato Pardo Lara  Aaron A. Berg  Jon Warland  Gary Parkin 《水文研究》2021,35(7):e14269

Soil freeze–thaw events have important implications for water resources, flood risk, land productivity, and climate change. A property of these phenomena is the relationship between unfrozen water content and sub-freezing temperature, known as the soil freezing characteristic curve (SFC). It is documented that this relationship exhibits hysteretic behaviour when frozen soil thaws, leading to the definition of the soil thawing characteristic curve (STC). Although explanations have been given for SFC/STC hysteresis, the effect that ‘scale’ – particularly ‘measurement scale’ – may have on these curves has received little attention. The most commonly used measurement scale metric is the ‘support’, which is the spatial (or temporal) unit within which the measured variable is integrated or soil volume sampled. We show (a) measurement support can influence the range and shape of the SFC and (b) hysteresis can be attributed, in part, to the support and location of the measurements comprising the SFC/STC. We simulated lab measured temperature, volumetric water content (VWC), and permittivity from soil samples undergoing freeze–thaw transitions using Hydrus-1D and a modified Dobson permittivity model. To assess the effect of measurement support and location on SFC/STC, we masked the simulated temperature and VWC/permittivity extent to match the instrument's support and location. By creating a detailed simulation of the intra- and inter-support variability associated with the penetration of a freezing front, we demonstrate how measurement support and location can influence the temperature range over which water freezing events are captured. We show it is possible to simulate hysteresis in homogenous media with purely geometric considerations, suggesting that SFC/STC hysteresis may be more of an apparent phenomenon than mechanistically real. Lastly, we develop an understanding of how the location and support of soil temperature and VWC/permittivity measurements influence the temperature range over which water freezing events are captured.  相似文献   

New P–T constraints on the Tamayen glaucophane‐bearing rocks,eastern Taiwan: Perple_X modelling results and geodynamic implications          下载免费PDF全文

I. Baziotis  C.‐H. Tsai  W. G. Ernst  B.‐M. Jahn  Y. Iizuka 《Journal of Metamorphic Geology》2017,35(1):35-54

New pseudosection modelling was applied to better constrain the P–T conditions and evolution of glaucophane‐bearing rocks in the Tamayen block of the Yuli belt, recognized as the world's youngest known blueschist complex. Based on the predominant clinoamphibole, textural relationships, and mineral compositions, these glaucophane‐bearing high‐P rocks can be divided into four types. We focused on the three containing garnet. The chief phase assemblages are (in decreasing mode): amphibole + quartz + epidote + garnet + chlorite + rutile/titanite (Type‐I), phengite + amphibole + quartz + garnet + chlorite + epidote + titanite + biotite + magnetite (Type‐II), and amphibole + quartz + albite + epidote + garnet + rutile + hematite + titanite (Type‐III). Amphibole exhibits compositional zoning from core to rim as follows: glaucophane → pargasitic amphibole → actinolite (Type‐I), barroisite → Mg‐katophorite/taramite → Fe‐glaucophane (Type‐II), glaucophane → winchite (Type‐III). Using petrographic data, mineral compositions and Perple_X modelling (pseudosections and superimposed isopleths), peak P–T conditions were determined as 13 ± 1 kbar and 550 ± 40 °C for Type‐I, 10.5 ± 0.5 kbar and 560 ± 30 °C for Type‐II (thermal peak) and 11 ± 1 kbar and 530 ± 30 °C for Type‐III. The calculations yield higher pressures and temperatures than previously thought; the difference is ~1–6 kbar and 50–200 °C. The three rock types record similar P–T retrograde paths with clockwise trajectories; all rocks followed trajectories with substantial pressure decrease under near‐isothermal conditions (Type‐I and Type‐III), with the probable exception of Type‐II where decompression followed colder geotherms. The P–T paths suggest a tectonic environment in which the rocks were exhumed from maximum depths of ~45 km within a subduction channel along a relative cold geothermal gradient of ~11–14 °C km^?1.  相似文献   

The synoptic‐ and planetary‐scale signatures of precipitating systems over the Mackenzie River Basin     

Gary M. Lackmann  John R. Gyakum 《大气与海洋》2013,51(4):647-674

Abstract

The synoptic‐ and planetary‐scale signatures of precipitating systems over the Mackenzie River Basin (MRB) are elucidated using composites based on a 28‐year sample of widespread precipitation events. These wet events are defined as days on which 5 or more of 12 surface stations in the MRB receive at least 2.5 mm of precipitation. Seasonal composites based on a total of 600 wet events reveal a sequence of statistically significant flow anomalies. Examination of individual wet events motivates stratification of the seasonal samples according to sea‐level pressure distribution. One evolution that is particularly common during fall, winter and spring involves lee cyclogenesis over the southern MRB in association with a strong cyclone over the Gulf of Alaska; such events are dubbed Gulf Redevelopment (GR) cases. A composite based on 59 wintertime GR events indicates upslope flow north of the lee cyclone and warm advection along an east‐west oriented warm front during the precipitation event. Composites of the Q‐vector and the divergence of this field confirm the presence of quasigeostrophic (QG) forcing for ascent over the MRB during this period. A thermally indirect “topographic tilting” mechanism, involving downs‐lope warming over the southern MRB and upslope cooling to the north, is hypothesized to increase warm‐frontal baroclinicity over the MRB. The GR composite 500 hPa geopotential height anomaly pattern is characterized by a series of anomalies extending from the Bering Sea to the Gulf of Mexico. The western (eastern) anomalies tend to decay (amplify) with time. The composite exhibits a positive anomaly over the Bering Sea, a negative anomaly over the Gulf of Alaska that moves eastward into the MRB during the precipitation event, and a positive anomaly that moves eastward over western and central North America. The presence of large, slow‐moving flow anomalies and an extended period of enhanced southwesterly geostrophic flow over the MRB in the composite suggests that a persistent influx of Pacific moisture is required to moisten the atmosphere over the MRB sufficiently for widespread precipitation. An independent composite of dry MRB cyclone events exhibits substantially weaker southwesterly geostrophic flow into the MRB relative to the wet GR composite.  相似文献   

Editorial Introduction     

Gary Huckleberry  Jamie Woodward 《Geoarchaeology》2015,30(3):165-166

  相似文献   

Initiation of large-volume silicic centers in the Yellowstone hotspot track: insights from H<Subscript>2</Subscript>O- and F-rich quartz-hosted rhyolitic melt inclusions in the Arbon Valley Tuff of the Snake River Plain     

Dana?L.?DrewEmail author  Ilya?N.?Bindeman  Matthew?W.?Loewen  Paul?J.?Wallace 《Contributions to Mineralogy and Petrology》2016,171(1):10

During the onset of caldera cluster volcanism at a new location in the Snake River Plain (SRP), there is an increase in basalt fluxing into the crust and diverse silicic volcanic products are generated. The SRP contains abundant and compositionally diverse hot, dry, and often low-δ¹⁸O silicic volcanic rocks produced through time during the formation of individual caldera clusters, but more H₂O-rich eruptive products are rare. We report analyses of quartz-hosted melt inclusions from pumice clasts from the upper and lower Arbon Valley Tuff (AVT) to gain insight into the initiation of caldera cluster volcanism. The AVT, a voluminous, caldera-forming rhyolite, represents the commencement of volcanism (10.44 Ma) at the Picabo volcanic field of the Yellowstone hotspot track. This is a normal δ¹⁸O rhyolite consisting of early and late erupted members (lower and upper AVT, respectively) with extremely radiogenic Sr isotopes and unradiogenic Nd isotopes, requiring that ~50 % of the mass of these elements is derived from melts of Archean upper crust. Our data reveal distinctive features of the early erupted lower AVT melt including: variable F concentrations up to 1.4 wt%, homogenous and low Cl concentrations (~0.08 wt%), H₂O contents ranging from 2.3 to 6.4 wt%, CO₂ contents ranging from 79 to 410 ppm, and enrichment of incompatible elements compared to the late erupted AVT, subsequent Picabo rhyolites, SRP rhyolites, and melt inclusions from other metaluminous rhyolites (e.g., Bishop Tuff, Mesa Falls Tuff). We couple melt inclusion data with Ti measurements and cathodoluminescence (CL) imaging of the host quartz phenocrysts to elucidate the petrogenetic evolution of the AVT rhyolitic magma. We observe complex and multistage CL zoning patterns, the most critical being multiple truncations indicative of several dissolution–reprecipitation episodes with bright CL cores (higher Ti) and occasional bright CL rims (higher Ti). We interpret the high H₂O, F, F/Cl, and incompatible trace element concentrations in the context of a model involving melting of Archean crust and mixing of the crustal melt with basaltic differentiates, followed by multiple stages of fractional crystallization, remelting, and melt extraction. This multistage process, which we refer to as distillation, is further supported by the complex CL zoning patterns in quartz. We interpret new Δ¹⁸O(Qz-Mt) isotope measurements, demonstrating a 0.4 ‰ or ~180 °C temperature difference, and strong Sr isotopic and chemical differences between the upper and lower AVT to represent two separate eruptions. Similarities between the AVT and the first caldera-forming eruptions of other caldera clusters in the SRP (Yellowstone, Heise and Bruneau Jarbidge) suggest that the more evolved, lower-temperature, more H₂O-rich rhyolites of the SRP are important in the initiation of a caldera cluster during the onset of plume impingement.  相似文献