油田开发中后期岩相单元的细分研究   总被引：11，自引：0，他引：11  

撒利明  王天琦  师永民  鲁明春  杜文博 《沉积学报》2002,20(4):595-599

油田开发中后期建立在原小层对比和沉积微相基础上的储层地质模型已不能适应调整挖潜和剩余油分布研究的要求,需要在小层划分的基础上,进一步细分到岩相单元。本文以大庆长垣南部葡北油田葡I组油层为例提出岩相单元的概念,通过现代沉积研究论证岩相单元细分的可行性,结合密井网测井曲线分析旋回性、隔夹层分布的稳定性及目前经济技术和采油工艺等,探讨细分单元的基本原则。最后提出岩相单元细分的基本方法。  相似文献   

一种新的储层孔隙成因类型--石英溶解型次生孔隙   总被引：26，自引：2，他引：26  

邱隆伟  姜在兴  陈文学  李晓红  熊志东 《沉积学报》2002,20(4):621-627

石英作为碎屑岩储层中的一种难溶组分,普遍认为它和次生孔隙的形成关系不十分密切。研究认为泌阳凹陷核桃园组储层中的碎屑石英颗粒存在明显的溶解现象,并形成以石英直接溶解型孔隙为主的储集空间特征。石英颗粒被溶解的部分在薄片中所占的范围为 2 %～ 7%者常见,高者达 8%以上,在总孔隙中所占的相对含量也多数在10 %～ 35 %之间,早成岩B期是其最主要形成期。石英溶解型次生孔隙的大量存在为碎屑岩储层中SiO₂ 胶结物及次生孔隙成因等问题的解释以及储层预测和评价提供了新的可能性。  相似文献   

ODP 1144站钻孔沉积物中微玻璃陨石的元素地球化学特征   总被引：8，自引：0，他引：8  

韦刚健  梁细荣  李献华  赵泉鸿  邵磊  朱照宇 《地球化学》2002,31(1):35-42

利用电子探针和激光探针等离子体质谱方法分析了取自南海北部的ODP1144钻孔沉积物中的微玻璃陨石和取自邻近的广东省湛江和吴川玻璃陨石的主元素和微量元素组成。结果显示，这些微玻璃陨石属于亚洲-澳大利亚散落区的普通微玻璃陨石。从成分上看，这些微玻璃陨石存在两种不同的类型，其中的绝大部分Al2O3含量在19.0%以上，属于高Al类型，相应的难熔微量元素含量也比较高；个别微玻璃陨石Al2O3含量（13.0%)和难熔微量元素含量较低，微量元素含量和特征比值都与邻近的广东省湛江和吴川的玻璃陨石相近。元素地球化学特征意味着，这些微玻璃陨石来源于同一靶源区，但靶区的物质组成并不均一。  相似文献   

MAPGIS大比例尺数字测图系统的设计   总被引：3，自引：0，他引：3  

樊文有  谢琼 《地球科学》2002,27(3):319-322

随着城市信息化建设特别是GIS应用的发展，对大比例尺数字图的需求日益增加。以往的测图软件往往着重于制图的需要，很少考虑GIS应用的需求。在MAPGIS平台的基础上，根据系统性、兼容性、扩展性和开发性等原则，详细探讨了大比例尺数字测图系统的整体结构、数据组织、工作流程，设计了一个完整的数字测图系统。该系统具有野外数据采集、输入、处理、联接成图、编辑与修改及绘图等淡啤酒，在输入地物图形的同时，可以输入图形属性信息，输出符合国家标准图式的图形，并自动生成和维护拓扑关系。输出成果数据可以直接进入GIS系统，进行分析处理。  相似文献   

Structural damage detection using the optimal weights of the approximating artificial neural networks     

Shih‐Lin Hung  C. Y. Kao 《地震工程与结构动力学》2002,31(2):217-234

This work presents a novel neural network‐based approach to detect structural damage. The proposed approach comprises two steps. The first step, system identification, involves using neural system identification networks (NSINs) to identify the undamaged and damaged states of a structural system. The partial derivatives of the outputs with respect to the inputs of the NSIN, which identifies the system in a certain undamaged or damaged state, have a negligible variation with different system errors. This loosely defined unique property enables these partial derivatives to quantitatively indicate system damage from the model parameters. The second step, structural damage detection, involves using the neural damage detection network (NDDN) to detect the location and extent of the structural damage. The input to the NDDN is taken as the aforementioned partial derivatives of NSIN, and the output of the NDDN identifies the damage level for each member in the structure. Moreover, SDOF and MDOF examples are presented to demonstrate the feasibility of using the proposed method for damage detection of linear structures. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

A mathematical hysteretic model for elastomeric isolation bearings     

J. S. Hwang  J. D. Wu  T.‐C. Pan  G. Yang 《地震工程与结构动力学》2002,31(4):771-789

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Tests on low‐ductility RC frames under high‐ and low‐frequency excitations     

Ser‐Tong Quek  Chengmei Bian  Xilin Lu  Wensheng Lu  Haibei Xiong 《地震工程与结构动力学》2002,31(2):459-474

The response of low‐ductility reinforced concrete (RC) frames, designed typically for a non‐seismic region, subjected to two frequencies of base excitations is studied. Five half‐scaled, two‐bay, two‐storey, RC frames, each approximately 5 m wide by 3.3 m high, were subjected to both horizontal and/or vertical base excitations with a frequency of 40 Hz as well as a lower frequency of about 4 Hz (close to the fundamental frequency) using a shake table. The imposed acceleration amplitude ranged from 0.2 to 1.2g. The test results showed that the response characteristics of the structures differed under high‐ and low‐frequency excitations. The frames were able to sustain high‐frequency excitations without damage but were inadequate for low‐frequency excitations, even though the frames exhibited some ductility. Linear‐elastic time‐history analysis can predict reasonably well the structural response under high‐frequency excitations. As the frames were not designed for seismic loads, the reinforcement detailing may not have been adequate, based on the crack pattern observed. The effect of vertical excitation can cause significant additional forces in the columns and moment reversals in the beams. The ‘strong‐column, weak‐beam’ approach for lateral load RC frame design is supported by experimental observations. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

Optimal design of passive energy dissipation systems based on H∞ and H2 performances     

J. N. Yang  S. Lin  J‐H. Kim  A. K. Agrawal 《地震工程与结构动力学》2002,31(4):921-936

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure     

Bong Yoo  Yang‐Hann Kim 《地震工程与结构动力学》2002,31(10):1777-1792

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

多年冻土地区L型挡土墙土压力(冻胀力)的分析与试验   总被引：6，自引：0，他引：6  

梁波  王家东  严松宏  黄志军  杨泉 《冰川冻土》2002,24(5):628-633

为适应多年冻土区土体冻胀过程所产生的较大变形的特性, 缩短施工进程, 减少扰动时间, 在青藏铁路格拉段选择了一个试验工点进行了L型悬臂挡墙的初步验证性试验研究. 通过对L型挡墙的受力模式分析, 确定了对粗颗粒填料不考虑冻胀力的土压力设计控制值. 通过与现场实测土压力分布规律的对比, 探讨了土压力与冻胀力的关系.  相似文献