洞穴完井工艺在寿阳地区煤层气钻井中的应用   总被引：4，自引：0，他引：4  

黄勇  熊涛 《中国煤炭地质》2008,20(2):61-64

洞穴完井工艺包括钻井、完井、排水采气等工序,为提高煤层渗透率,最大限度的保证煤层气解析与运移,洞穴完井一般要求有效井径3-4m,及一定范围的破碎带。远东能源公司为开采寿阳地区15#煤层中的煤层气,部署了4口生产井．其井身设计为三开结构。钻井主要设备为T685WS顶驱车载钻机及多台不同型号的空压机,采用潜孔锤冲击钻进．以空气、空气泡沫为冲洗介质,钻进至15#目标煤层底板以下46m处完钻,然后利用可伸缩式扩孔器进行扩孔。在扩孔至距三开井底8～10m时．开始采用空气和清水憋压,通过瞬间释放压力,使煤层坍塌,如此反复,至造穴直径达到要求。由于严格按照技术标准及操作流程作业,采取的技术措施合理,4口井均已顺利投入生产,增产效果显著。可见该种洞穴完井技术的应用,不仅可以保护煤层原生结构及环境,并且还能减少煤层气射孔、压裂等环节的费用．对于煤层气井施工具有重要的经济意义。  相似文献   

基于LOD的选取模型应用于电子地图多尺度显示的研究     

张锦明  游雄 《测绘科学技术学报》2008,25(6)

从电子地图多尺度显示角度出发,提出了基于LOD的选取模型。在选取模型中将显示比例尺和地图比例尺的比值作为LOD算子,总结了LOD算子设置的3个层次,以及分类、分级、要素和空间几何特征等LOD算子的设置规则。  相似文献   

地壳运动速度场插值方法研究     

刁法启  熊熊 《武汉大学学报(信息科学版)》2008,33(6):627-630

分析了构建速度场的统计模型和函数模型法,提出利用两种模型逼近原始观测速度的综合逼近法,以减少剩余误差.计算和比较了各种方法,结果显示,综合法优于单独利用统计模型和函数模型法.  相似文献   

Cross-formational hydrocarbon fluid flows in the Tertiary deltaic system of the Beaufort–Mackenzie Basin     

Maowen Li  Yongqiang Xiong  Lloyd R. Snowdon  Dale Issler 《Journal of Geochemical Exploration》2006,89(1-3):214

Molecular and isotopic compositions of crude oils in the Beaufort–Mackenzie Basin confirm three genetic end-member oil groups and suggest extensive cross-formational hydrocarbon fluid flows in the Tertiary deltaic system. Inter- and intra-fractional variations in the geochemistry of the Tertiary-reservoired oils indicate that the oil source/maturity signatures were substantially masked by biomarkers that were picked up along migration pathways. Thus, many of the previously recognized “immature non-marine oils” are in fact thermally mature, probably derived from unpenetrated deeper marine source rocks. Although the effective source rock volumes have not been evaluated and their exact stratigraphic levels remain unknown, the relative timing of oil generation versus trap formation, rather than poor source quality, may be the cause of under-filled traps in the offshore area.  相似文献   

Petrogenesis of Cretaceous adakitic and shoshonitic igneous rocks in the Luzong area, Anhui Province (eastern China): Implications for geodynamics and Cu–Au mineralization     

Qiang Wang  Derek A. Wyman  Ji-Feng Xu  Zhen-Hua Zhao  Ping Jian  Xiao-Lin Xiong  Zhi-Wei Bao  Chao-Feng Li  Zheng-Hua Bai 《Lithos》2006,89(3-4):424-446

Both adakitic and shoshonitic igneous rocks in the Luzong area, Anhui Province, eastern China are associated with Cretaceous Cu–Au mineralization. The Shaxi quartz diorite porphyrites exhibit adakite-like geochemical features, such as light rare earth element (LREE) enrichment, heavy REE (HREE) depletion, high Al₂O₃, MgO, Sr, Sr / Y and La / Yb values, and low Y and Yb contents. They have low ε_Nd(t) values (− 3.46 to − 6.28) and high (⁸⁷Sr / ⁸⁶Sr)_i ratios (0.7051–0.7057). Sensitive High-Resolution Ion Microprobe (SHRIMP) zircon analyses indicate a crystallization age of 136 ± 3 Ma for the adakitic rocks. Most volcanic rocks and the majority of monzonites and syenites in the Luzong area are K-rich (or shoshonitic) and were also produced during the Cretaceous (140–125 Ma). They are enriched in LREE and large-ion lithophile elements, and depleted in Ti, and Nb and Ba and exhibit relatively lower ε_Nd(t) values ranging from − 4.65 to − 7.03 and relatively higher (⁸⁷Sr / ⁸⁶Sr)_i ratios varying between 0.7057 and 0.7062. The shoshonitic and adakitic rocks in the Luzong area have similar Pb isotopic compositions (²⁰⁶Pb / ²⁰⁴Pb = 17.90–18.83, ²⁰⁷Pb / ²⁰⁴Pb = 15.45–15.62 and ²⁰⁸Pb / ²⁰⁴Pb = 38.07–38.80). Geological data from the Luzong area suggest that the Cretaceous igneous rocks are distributed along NE fault zones (e.g., Tanlu and Yangtze River fault zones) in eastern China and were likely formed in an extensional setting within the Yangtze Block. The Shaxi adakitic rocks were probably derived by the partial melting of delaminated lower crust at pressures equivalent to crustal thickness of > 50 km (i.e., 1.5 GPa), possibly leaving rutile-bearing eclogitic residue. The shoshonitic magmas, in contrast, originated mainly from an enriched mantle metasomatized by subducted oceanic sediments. They underwent early high-pressure (> 1.5 GPa) fractional crystallization at the boundary between thickened (> 50 km) lower crust and lithospheric mantle and late low-pressure (< 1.5 GPa) fractional crystallization in the shallow (< 50 km) crust. The adakitic and shoshonitic rocks appear to be linked to an intra-continental extensional setting where partial melting of enriched mantle and delaminated lower crust was probably controlled by lithospheric thinning and upwelling of hot asthenosphere along NE fault zones (e.g., Tanlu and Yangtze River fault zones) in eastern China. Both the shoshonitic and adakitic magmas were fertile with respect to Cu–Au mineralization.  相似文献   

基于数据手套和跟踪器的虚拟手臂建模     

刘颖真  万刚  游雄 《测绘科学技术学报》2005,22(4):272-274

文中利用数据手套和跟踪器获取手臂各关节运动数据,根据关节运动限制对所获取数据进行处理,建立了符合人体运动规律的虚拟手臂数学模型,实现了虚拟环境中与试验者的手臂同步运动、效果逼真的虚拟手臂模型.  相似文献   

纹理映射失真处理中的LOD技术     

王菲  卢晨琰夏青 游雄 《测绘学院学报》2005,22(4):304-306

纹理映射是计算机图形学中广泛应用的一项重要技术,纹理图像可以描述景物表面各点处的反射属性,模拟景物表面丰富的纹理细节,减少建模的工作量,提高计算机生成图形的真实性.但是由于纹理都为栅格图像,放大和缩小会产生一定程度的失真,所以要对纹理进行细节分层处理.文中主要介绍纹理的重采样和建立金字塔技术,提出减少纹理映射失真的方法.  相似文献   

少量地面控制点的遥感图像精纠正与定位技术探讨     

张宝印  熊兴华赵琪 《测绘科学与工程》2005,25(4):5-7

本文主要讨论了利用空间投影一空间斜墨卡托（SOM）投影进行卫星遥感图像精纠正与定位，解决缺少控制点地区卫星遥感图像精纠正与定位问题，并根据正反算公式讨论了卫星遥感图像纠正的空间投影数学基础。  相似文献   

赣北中元古界双桥山群低变质强变形行为与格林威尔期造山作用   总被引：4，自引：1，他引：4  

秦松贤  章泽军  张志  赵温霞  蔡雄飞  顾延生 《地质科技情报》2002,21(2):8-12

广泛分布于赣北地区的中元古界双桥山群，以低级区域变质作用、强烈构造变形、具陆内造山带构造变形特征；其成果系在华夏古陆与扬子古陆的碰撞拼接过程中，其应力向陆内传递的结果；时间大致在1100－800Ma，与全球格林威尔期造山作用相当。  相似文献   

Tests on low‐ductility RC frames under high‐ and low‐frequency excitations     

Ser‐Tong Quek  Chengmei Bian  Xilin Lu  Wensheng Lu  Haibei Xiong 《地震工程与结构动力学》2002,31(2):459-474

The response of low‐ductility reinforced concrete (RC) frames, designed typically for a non‐seismic region, subjected to two frequencies of base excitations is studied. Five half‐scaled, two‐bay, two‐storey, RC frames, each approximately 5 m wide by 3.3 m high, were subjected to both horizontal and/or vertical base excitations with a frequency of 40 Hz as well as a lower frequency of about 4 Hz (close to the fundamental frequency) using a shake table. The imposed acceleration amplitude ranged from 0.2 to 1.2g. The test results showed that the response characteristics of the structures differed under high‐ and low‐frequency excitations. The frames were able to sustain high‐frequency excitations without damage but were inadequate for low‐frequency excitations, even though the frames exhibited some ductility. Linear‐elastic time‐history analysis can predict reasonably well the structural response under high‐frequency excitations. As the frames were not designed for seismic loads, the reinforcement detailing may not have been adequate, based on the crack pattern observed. The effect of vertical excitation can cause significant additional forces in the columns and moment reversals in the beams. The ‘strong‐column, weak‐beam’ approach for lateral load RC frame design is supported by experimental observations. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献