An orthotropic interface damage model for simulating drying processes in soils     

Osvaldo Manzoli  Marcelo Sánchez  Michael Maedo  Jumanah Hajjat  Leonardo J. N. Guimarães 《Acta Geotechnica》2018,13(5):1171-1186

The study of drying process in soils has received an increased attention in the last few years. This is very complex phenomenon that generally leads to the formation and propagation of desiccation cracks in the soil mass. In recent engineering applications, high aspect ratio elements have proved to be well suited to tackle this type of problem using finite elements. However, the modeling of interfaces between materials with orthotropic properties that generally exist in this type of problem using standard (isotropic) constitutive model is very complex and challenging in terms of the mesh generation, leading to very fine meshes that are intensive CPU demanding. A novel orthotropic interface mechanical model based on damage mechanics and capable of dealing with interfaces between materials in which the strength depends on the direction of analysis is proposed in this paper. The complete mathematical formulation is presented together with the algorithm suggested for its numerical implementation. Some simple yet challenging synthetic benchmarks are analyzed to explore the model capabilities. Laboratory tests using different textures at the contact surface between materials were conducted to evaluate the strengths of the interface in different directions. These experiments were then used to validate the proposed model. Finally, the approach is applied to simulate an actual desiccation test involving an orthotropic contact surface. In all the application cases the performance of the model was very satisfactory.  相似文献   

A micromechanical experimental study of highly/completely decomposed tuff granules     

C. S. Sandeep  M. C. Todisco  V. Nardelli  K. Senetakis  M. R. Coop  S. D. N. Lourenco 《Acta Geotechnica》2018,13(6):1355-1367

In this paper, an experimental micromechanical study is presented investigating the contact mechanics and tribological behaviour of highly/completely decomposed tuff granules. The parent material was taken from two locations—named the top and bottom—from a recent landslide in Hong Kong, and in this study the tested granules were obtained from the parent material after drying and sieving processes. Basic material characterisation was conducted quantifying the particle shape, the surface roughness and the strength of a set of grains. A set of twenty-nine monotonic inter-particle shearing tests were conducted on pairs of granules taken from the top and bottom of the landslide. It was found that the granules had very high friction angles at their contacts, in general greater in comparison with other materials reported in the literature. The slightly greater inter-particle friction for the granules taken from the top of the landslide might be because of their higher roughness in comparison with the ones from the bottom. Additional experiments were conducted to investigate the normal and tangential load–displacement response of the granules subjected to cyclic loading. A good curve fitting for the normal load–displacement response could be obtained by using very low apparent Young’s moduli in the Hertzian model. In general, the decomposed tuff granules showed significant plastic response during the first normal load cycle, and this plastic behaviour continued for the subsequent third and fourth cycles. In the cyclic inter-particle shearing tests, the nonlinearity and hysteresis increased for larger cyclic displacements, but the effect of the number of shearing cycles on the energy loss was generally small. Finally, a limited discussion is presented on the applicability of a theoretical model on the tangential load–displacement behaviour of the granules.  相似文献   

Assessing LNRF,FR, and AHP models in landslide susceptibility mapping index: a comparative study of Nojian watershed in Lorestan province,Iran     

M. Abedini  S. Tulabi 《Environmental Earth Sciences》2018,77(11):405

Landslides and slope instabilities are major risks for human activities which often lead to economic losses and human fatalities all over the world. The main purpose of this study is to evaluate and compare the results of Landslide Nominal Risk Factor (LNRF), Frequency Ratio (FR), and Analytical Hierarchy Process (AHP) models in mapping Landslide Susceptibility Index (LSI). The study case, Nojian watershed with an area of 344.91 km², is located in Lorestan province of Iran. The procedure was as follows: first, the effective factors of the landslide basin were prepared for each layer in the GIS software. Then, the layers and the landslides of the basin were also prepared using aerial photographs, satellite images, and fieldwork. Next, the effective factors of the layers were overlapped with the map of landslide distribution to specify the role of units in such distribution. Finally, nine factors including lithology, slope, aspect, altitude, distance from the fault, distance from river, fault land use, rainfall, and altitude were found to be effective elements in landslide occurrence of the basin. The final maps of LSI were prepared based on seven factors using LNRF, FR, and AHP models in GIS. The index of the quality sum (Qs) was also used to assess the accuracy of the LSI maps. The results of the three models with LNRF (40%), FR (39%), and AHP (44%) indicated that the whole study area was located in the classes of high to very high hazard. The Qs values for the three models above were also found to be 0.51, 0.70 and 0.70, respectively. In comparison, according to the amount of Qs, the results of AHP and FR models have slightly better performed than the LNRF model in determining the LSI maps in the study area. Finally, the study watershed was classified into five classes based on LSI as very low, low, moderate, high, and very high. The landslide susceptibility maps can be helpful to select sites and mitigate landslide hazards in the study area and the regions with similar conditions.  相似文献   

Dependence of radon exhalation on grain size of sedimentary waste     

Eman M. Ibrahim  Ibrahim E. El Aassy  Hayam Ahmed Abdel Ghany  S. H. Gamil 《Environmental Earth Sciences》2018,77(14):534

Tailings resulted from sulphuric acid leaching process of uranium from sedimentary rocks contain high concentrations of ²²⁶Ra and its daughters, the most important of which is ²²²Rn. Movement of radon gas out of the tailings is strongly influenced by the physicochemical characteristics of these tailings especially their radium content and the grain size. So, the tailing samples were size fractionated into four sizes (>?250, 250–125, 125–74 and <?74 µm). The natural radioactivity was investigated using hyper-pure germanium detector and solid-state nuclear track detectors (CR-39) for bulk size and after size fractionation. The activity concentrations of different radionuclides in size-fractionated tailing samples have been shown to be strongly dependent on the size of the particles. In the range of >?250 and <?74 µm, the activity concentrations of ²³⁰Th, ²²⁶Ra, ²¹⁴Pb, ²¹⁴Bi, ²¹⁰Pb, ²³²Th and ⁴⁰K increased throughout with decreasing particle size, while that of ²³⁸U, ²³⁴U and ²³⁵U have an opposite effect. The results revealed an inverse relationship between the radon exhalation rate and size fractionation. Also, the results showed a good correlation between radium activity concentration and radon mass exhalation rate.  相似文献   

Delineation of groundwater prospective zones from a delta region of India,using geoelectrical and water quality approach     

P. V. Nageswara Rao  S. Appa Rao  N. Subba Rao 《Environmental Earth Sciences》2018,77(17):616

Geoelectrical survey was carried out in the western delta region of River Vasista Godavari, Andhra Pradesh, India, for delineation of groundwater prospective zones due to acute shortage of water supply for various purposes. Forty-six vertical electrical soundings (VES) were done, employing the Schlumberger configuration with a maximum AB/2 of 160 m. The interpreted results of VES show four to five layers with variable thicknesses, such as topsoil zone (1.5–3 m), clay zone (0.84–32 m), finer sand zone (2–72 m), medium to coarse sand zone (4 to 28.8 m) and clay zone (1.2–∞ m), indicating a multi-aquifer system. These results are corroborated with the known lithologs of the study area. Further, the resistivity is also compared with electrical conductivity (EC) of groundwater observed nearby shallow wells representing buried channel (BC), flood plain (FP) and coastal (C) zones, which indicate slightly brackish to brackish water (EC: 1470–6010 µS/cm), whereas the groundwater observed from deep wells shows the fresh (EC: 726–1380 µS/cm), fresh to brackish (EC: 1010 to 3250 µS/cm), and brackish water (EC: 3020 to 4170 µS/cm) located in BC, FP and C zones, respectively. This survey reveals the prospective aquifer zones with potable water at VES locations of 4–6, 8, 10, 11, 14, 16–28, 33–36, 39 and 42–44, where the resistivity values vary from 10 to 40 Ω m. The slightly brackish and brackish water zones are also observed from the resistivity of less than 10 Ω m at shallow depth in BC (VES-22, 37, 38 and 46), FP (VES-1, 2, 7, 29, 30 and 40) and C (VES-3, 4, 9, 12, 13, 15, 31, 32, 41 and 45) zones. As a result, the present investigation has delineated the freshwater zones at shallow (<?12 m) and also at deeper depths (30–45 m) as prospective areas, where BC zone occurs. Freshwater pockets also identified in FP (VES-8 and 39) and C (VES-11, 14 and 15) zones. Thus, this study helps to solve the drinking and irrigation water problems.  相似文献   

Algal and fungal diversity on various dimension stone substrata in the Saale/Unstrut region     

N. Kirchhoff  M. Hoppert  C. Hallmann 《Environmental Earth Sciences》2018,77(17):609

Physical, chemical and biogenic weathering considerably threatens all historic stone monuments. Microorganisms, though inconspicuous, are key players of stone surface colonization and penetration. This study highlights eukaryotic microbial communities on dimension stone surfaces from two representative monuments of the “cultural landscape corridor” in the Saale–Unstrut area. The historical buildings were erected from local Triassic limestone and sandstone and are prone to various deteriorative mechanisms. Generally, trebouxiophyceaen algae and ascomycete fungi dominate among the latter dematiaceous fungi and lichen fungi are abundant. Inside the stone substratum, ascomycetes, mosses and even large soil organisms (tardigrades) are present. This may be taken as a hint for the formation of pores with large radii, which are “risk indicators” for progressive weathering and degradation of the rock matrix.  相似文献   

Ecology of the bottom fauna and bioaccumulation of trace metals along the Lena River–Laptev Sea transect     

L. L. Demina  S. V. Galkin 《Environmental Earth Sciences》2018,77(2):43

The first data on ecology and trace metal (As, Cd, Cr, Cu, Fe, Mn, Ni, Pb) bioaccumulation by macrozoobenthic organisms in area along the 130°E meridional transect from shallow water near the Lena River’s delta till the 78°N are presented. At the newly discovered methane seeps in the shallow Laptev Sea areas (72 m depth), a higher total abundance and biomass compared with background stations were recorded. In carbonate shells and soft tissues of Bivalvia Portlandia arctica and Astarte borealis, the high concentrations of Mn, Fe, Pb, Ni and Co were detected that varied in dependence from sampling site. In the dominating taxa of brittle stars (Ophiuroidea), there were found no significant differences between majority of trace metal content in organisms inhabiting the seeps area and background ones. An elevated content of some metals was detected in the Asteroidea bodies that may be attributed to its trophic behavior (deposit feeder).  相似文献   

Snowmelt runoff and groundwater discharge in Himalayan rivers: a case study of the Satluj River,NW India     

A. S. Maurya  S. P. Rai  N. Joshi  K. S. Dutt  N. Rai 《Environmental Earth Sciences》2018,77(19):694

The Himalayas are one of the largest cryospheric systems outside the Polar Regions, and include more than 12,000 glaciers spread over an area of about 33,000 km². The Himalayan glaciers and snow packs retreating at an accelerating rate, thereby creating an alarming situation for the huge population that resides in northwestern India and southeastern Pakistan, as they depend on surface water resources in the region and rivers emanating from the Himalayas. This work attempts to quantify the contribution of different sources such as glacial/ice/snow melt and groundwater discharge to the Satluj River using the stable isotopes based hydrograph separation method at Ropar (foot hill) and Yusufpur in plain of Punjab, India. A mass balance model of three-component mixing has been engaged using the values of δ¹⁸O and electrical conductivity of the river water, and its discharge fraction, to estimate the time-varying relative proportion of each component from July 2013 to January 2014. The proportion of glacier melt was found to peak up to ~?64% at Ropar and ~?15% at Yusufpur during the wet summer months. The fraction of groundwater discharge was found to vary between 10–20% at Ropar and 25–35% at Yusufpur (Punjab plain) over time. The observed trend of d-excess (deuterium excess) values of river water also suggests that the glaciers and snow packs at higher altitudes contain a significant fraction of snow derived from vapor originating in the Mediterranean region, driven by the mid-latitude westerlies known as western disturbances.  相似文献   

Mapping lithological variations in a river basin of West Bengal,India using electrical resistivity survey: implications for artificial recharge     

K. Pratima Panda  S. P. Sharma  Madan K. Jha 《Environmental Earth Sciences》2018,77(17):626

Groundwater is a treasured earth’s resource and plays an important role in addressing water and environmental sustainability. However, its overexploitation and wide spatial variability within a basin and/or across regions are posing a serious challenge for groundwater sustainability. Some parts of southern West Bengal of India are problematic for groundwater occurrence despite of high rainfall in this region. Characterization of an aquifer in this area is very important for sustainable development of water supply and artificial recharge. Electrical resistivity surveys using 1-D and 2-D arrays were performed at a regular interval from Subarnarekha River at Bhasraghat (south) to Kharagpur (north) to map the lithological variations in this area. Resistivity sounding surveys were carried out at an interval of 2–3 km. Subsurface resistivity variation has been interpreted using very fast simulated annealing (VFSA) global optimization technique. The analysis of the field data indicated that the resistivity variation with depth is suitable in the southern part of the area and corresponds to clayey sand. Interpreted resistivity in the northern part of the area is relatively high and reveals impervious laterite layer. In the southern part of the area resistivity varies between 15 and 40 Ωm at a depth below 30 m. A 2-D resistivity imaging conducted at the most important location in the area is correlated well with the 1-D results. Based on the interpreted resistivity variation with depth at different locations different types of geologic units (laterite, clay, sand, etc.) are classified, and the zone of interests for aquifer has been demarcated. Study reveals that southern part of the area is better for artificial recharge than the northern part. The presence of laterite cover in the northern part of the area restricts the percolation of rainwater to recharge the aquifer at depth. To recharge the aquifer at depth in the northern part of the area, rainwater must be sent artificially at depth by puncturing laterite layers on the top. Such studies in challenging areas will help in understanding the problems and finding its solution.  相似文献   

Borehole diffusive flux apparatus for characterizing diffusive mass-transfer in subsurface systems     

Mark L. Brusseau  Kenneth C. Carroll  Zhilin Guo  Jon Mainhagu 《Environmental Earth Sciences》2018,77(18):648

The concept of the Borehole Diffusive Flux Apparatus (BDFA) is presented herein. The BDFA is an innovative apparatus designed to provide continuous direct access to an undisturbed column of sediment that can be monitored at multiple discrete vertical intervals to provide high-resolution characterization of local-scale mass transfer and attenuation. The conceptual basis and technical design of the device are presented, along with an example of borehole design and installation at a field site. Mathematical simulations are used to illustrate its application for two scenarios. The results of these simulations indicate that test periods of several weeks to a few months should be sufficient to obtain robust results. The device has the potential to improve our ability to characterize critical mass-transfer and attenuation processes and to quantify the associated rates. This information is key to the evaluation of remediation alternatives, for enhancing the accuracy of mathematical models, and to support more effective long-term management of large groundwater contaminant plumes present at many sites.  相似文献