Performance of Mortar and Chemical Grout Injection into Surrounding Soil When Slurry Pipe-jacking Method is Used   总被引：1，自引：0，他引：1  

Hideki Shimada  Takashi Sasaoka  Saeid Khazaei  Yasuhiro Yoshida  Kikuo Matsui 《Geotechnical and Geological Engineering》2006,24(1):57-77

Small-diameter shallow tunnels are often being built by using the slurry pipe-jacking method. This system involves the pushing or thrusting of a drivage machine and concrete pipes into the ground. Chemical grout injection into the surrounding soil around the tunnel is carried out after the drivage and pushing processes are finished. The purpose of the chemical grout injection is to maintain permanent stability of the surrounding soil. However, the behavior of the chemical grouting material in the surrounding soil around the tunnel and the amount of optimum injection is not clearly understood. From these points of view, this paper discusses the performance of the chemical grouting material, when it is injected into the surrounding soil around the tunnel, by means of 2-D Eulerian–Lagrangian seepage analysis. Moreover, the effectiveness of the chemical grout injection was evaluated by using the non-linear finite element method. This investigation show when the range of the grouted zone is designed; it is necessary that the relationship between Young’s modulus of the soil/grouted zone and the confining stress be taken into consideration in order to establish effective, economical and safe chemical grout injection system. Understanding the performance of the seepage/dispersion behavior of the chemical grout and the characteristics of soil/ grouted zone is also important.  相似文献   

Negative Ce Anomaly in the Indian Banded Iron Formations: Evidence for the Emergence of Oxygenated Deep-Sea at 2.9-2.7 Ga     

Yasuhiro KATO  Takashi KANO  Keitaro KUNUGIZA 《Resource Geology》2002,52(2):101-110

Abstract: Major and rare earth element contents are reported for Late Archean banded iron formations (BIFs) in the Bababudan Group of the Dharwar Craton, South India. The BIFs are mostly composed of SiO₂ (average1ρ = 54.88.1 wt%) and Fe₂O₃* (44.38.2 wt%). The Al₂O₃ and TiO₂ contents are remarkably low, suggesting that detrital components were starved during the BIF deposition. The BIFs have a LREE-enriched pattern with a relatively high (La/Yb)_N (6.644.07). Total REE concentrations (RE) vary from 5.2 to 65.3 ppm. The REE patterns are characterized by the presence of a very large negative Ce anomaly (Ce/Ce*: 0.13-0.83) and a positive Eu anomaly (Eu/Eu*: 0.96-2.45). The Eu/Eu* decreases and (La/Yb)_N increases with a increase of RE. These correlations of REE indices are similar to those of modern hydrothermal iron-rich sediments near a mid-ocean ridge (MOR). Greenstones associated with the BIFs have MORB-like geochemical features. These geochemical and geological lines of evidence indicate that the depositional site of the BIFs was remote from a continent and/or island arc and that the BIFs were in situ hydrothermal sediments near a MOR. A striking negative Ce anomaly in the BIFs indicates that oxygenated deep-sea environments emerged at 2.9-2.7 Ga. The existence of contemporaneous Mn deposits in the Dharwar Craton supports this assertion. Our scenario of oxygen in the Earth's surface of the Late Archean is different from long-held notion that the atmosphere and ocean were persistently anoxic throughout the Archean.  相似文献   

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings     

Nicolas Luco  Yasuhiro Mori  Yosuke Funahashi  C. Allin Cornell  Masayoshi Nakashima 《地震工程与结构动力学》2003,32(14):2267-2288

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Three-dimensional stability evaluation of landslides and a sliding process simulation using a new geographic information systems component   总被引：8，自引：0，他引：8  

Mowen Xie  Tetsuro Esaki  Guoyun Zhou  Yasuhiro Mitani 《Environmental Geology》2003,43(5):503-512

  相似文献   

UV Laser Ablation ICP-MS: Some Applications in the Earth Sciences   总被引：4，自引：0，他引：4  

Robert W. Nesbitt  Takafumi Hirata  Ian B. Butler  James A. Milton 《Geostandards and Geoanalytical Research》1997,21(2):231-243

This study reports a series of applications of UV laser ablation ICP-MS in the geological sciences. The advantages and disadvantages of the PQ "S" option and the use of nitrogen in the carrier gas are discussed. A general problem common to all ablation techniques is the calibration technique and experiments involving synthetic calibration samples are covered. Zircon geochemistry and geochronology by LA-ICP-MS are discussed and data are presented for REE, Hf and U for a standard zircon (91500) as well as a series of zircons from Zimbabwe. The potential of using Ce and Eu anomalies in petrologic studies is illustrated by zircons from a fractionated gabbroic-granite in the Urals. The potential of the LA-ICP-MS method to utilise standard X-ray fluorescence glass discs is demonstrated as a useful semi-quantitative tool in determining REE patterns. LA-ICP-MS is a powerful tool in the analysis of the platinum group elements (and Re) and some examples are given in the successful application of the technique to partitioning in iron meteorites.  相似文献   

Spectrum Analysis of the Reflected Waves Observed in the Nikko Region, Central Japan     

T. Iidaka  N. Hirata  T. Yoshihara 《Pure and Applied Geophysics》1997,150(1):37-52

—The Nikko region, in northern Kanto, central Japan, which is a high seismicity region, is located near the volcanic front. Many seismic observations have been carried out around the Nikko region because the seismograms of the shallow earthquakes occurring in this region show an S-wave reflected phase (SxS) and an S-to-P mode-converted and reflected phase (SxP) from a mid-crustal seismic velocity discontinuity. The depth of the mid-crustal reflector was estimated to be about 9–16 km. From the amplitude analyses of SxS and SxP phases, the material of the mid-crustal layer just beneath the reflector was expected to be a low rigidity layer, which was interpreted as partially molten rocks. No evidence has been shown for the internal properties of the material of the reflector. The Vp/Vs ratio is a good measure to distinguish between the two candidates for seismic reflectors; i.e., partially molten rocks and rocks containing water. We investigate the Vp/Vs ratio of the reflector using the spectrum analyses of the data observed by a seismic array. From spectrum analysis of the data, we indicate that the Vp/Vs ratio of 2.5 is better than that of 1.8 to explain the observed data, which shows that the material beneath the reflector consists of partially molten rocks.  相似文献   

Formation and shortening deformation of a back-arc rift basin revealed by deep seismic profiling, central Japan   总被引：1，自引：0，他引：1  

Hiroshi Sato  Takaya Iwasaki  Shinji Kawasaki  Yasutaka Ikeda  Nobuhisa Matsuta  Tetsuya Takeda  Naoshi Hirata  Taku Kawanaka   《Tectonophysics》2004,388(1-4):47

The northern Fossa Magna (NFM) basin is a Miocene rift system produced in the final stages of the opening of the Sea of Japan. It divides the major structure of Japan into two regions, with north-trending geological structures to the NE of the basin and EW trending structures to the west of the basin. The Itoigawa-Shizuoka Tectonic Line (ISTL) bounds the western part of the northern Fossa Magna and forms an active fault system that displays one of the largest slip rates (4–9 mm/year) in the Japanese islands. Deep seismic reflection and refraction/wide-angle reflection profiling were undertaken in 2002 across the northern part of ISTL in order to delineate structures in the crust, and the deep geometry of the active fault systems. The seismic images are interpreted based on the pattern of reflectors, the surface geology and velocities derived from refraction analysis. The 68-km-long seismic section suggests that the Miocene NFM basin was formed by an east dipping normal fault with a shallow flat segment to 6 km depth and a deeper ramp penetrating to 15 km depth. This low-angle normal fault originated as a comparatively shallow brittle/ductile detachment in a high thermal regime present in the Miocene. The NFM basin was filled by a thick (>6 km) accumulation of sediments. Shortening since the late Neogene is accommodated along NS to NE–SE trending thrust faults that previously accommodated extension and produce fault-related folds on their hanging wall. Based on our balanced geologic cross-section, the total amount of Miocene extension is ca. 42 km and the total amount of late Neogene to Quaternary shortening is ca. 23 km.  相似文献   

Temperatures and Oxygen Isotopic Compositions of Hydrothermal Fluids for the Takatori Tungsten-copper Deposit, Japan     

Yasuhiro Shibue    Hitoshi Chiba    Minoru Kusakabe  Yuichi Morishita 《Resource Geology》2005,55(2):101-110

Abstract. Fluid inclusion and oxygen isotope studies are performed to obtain temperatures and oxygen isotopic compositions of hydrothermal fluids for the vein-type tungsten-copper deposit at Takatori in Ibaraki Prefecture, Japan. Temperatures of the hydrothermal fluids are calculated from fluid inclusion data. The calculation incorporates the effects of the salinity, gas concentration, and fluid pressure. The fluid temperatures range from 370 to 460C. For these calculations, this study obtains a density equation for H₂O-NaCl-CO₂ solution at the vapor-liquid two-phase boundary. Then the present study combines the obtained equation with the equation of state by Bowers and Helgeson (1983).
The fluid temperatures determined in this study are applied to the calculation of oxygen isotopic compositions of the hydrothermal fluids. The calculation of the oxygen isotopic compositions is based on the oxygen isotope analyses of vein quartz. The oxygen isotopic compositions of vein quartz range from +13.5 to +14.4 % relative to SMOW. Then, the oxygen isotopic compositions of the hydrothermal fluids in equilibrium with the vein quartz are calculated to be from +9.7 to +10.5 %. These δ¹⁸O_fluid values agree with those of magmatic fluids derived from the ilmenite-series granitic rock, which is related to the mineralization. Keywords: Takatori tungsten-copper deposit, fluid inclusion, oxygen isotope, vein quartz, H₂O-NaCl-CO₂ solution, density  相似文献   

A Special Issue: Seafloor Processes and Related Mineralization in the Panthalassa: The Phanerozoic Records from the Japanese Accretionary Complexes - Part I     

Yasuhiro Kato    Kosei Komuro  Ken Nakayama 《Resource Geology》2005,55(4):289-290

  相似文献   

Rare Earth, Major and Trace Elements in the Kunimiyama Ferromanganese Deposit in the Northern Chichibu Belt, Central Shikoku, Japan   总被引：1，自引：0，他引：1  

Yasuhiro Kato    Koichiro Fujinaga  Tatsuo Nozaki    Kentaro Nakamura    Ryuji Ono  Hiroshi Osawa 《Resource Geology》2005,55(4):291-300

Abstract. Rare earth, major and trace element geochemistry is reported for the Kunimiyama stratiform ferromanganese deposit in the Northern Chichibu Belt, central Shikoku, Japan. The deposit immediately overlies greenstones of mid-ocean ridge basalt (MORB) origin and underlies red chert. The ferromanganese ores exhibit remarkable enrichments in Fe, Mn, P, V, Co, Ni, Zn, Y and rare earth elements (excepting Ce) relative to continental crustal abundance. These enriched elements/ Fe ratios and Post-Archean Average Australian Shale-normalized REE patterns of the ferromanganese ores are generally analogous to those of modern hydrothermal ferromanganese plume fall-out precipitates deposited on MOR flanks. However in more detail, Mn and Ti enrichments in the ferromanganese ores are more striking than the modern counterpart, suggesting a significant contribution of hydrogenetic component in the Kunimiyama ores. Our results are consistent with the interpretation that the Kunimiyama ores were umber deposits that primarily formed by hydrothermal plume fall-out precipitation in the Panthalassa Ocean during the Early Permian and then accreted onto the proto-Japanese island arc during the Middle Jurassic. The presence of strong negative Ce anomaly in the Kunimiyama ores may indicate that the Early Permian Panthalassa seawater had a more striking negative Ce anomaly due to a more oxidizing oceanic condition than today.  相似文献