排序方式： 共有86条查询结果，搜索用时 15 毫秒
11.
The Batu Hijau deposit is the only porphyry type deposit in production in the Sunda‐Banda arc, Indonesia. This study discusses the reason for the localization of copper grade at the deep part of the deposit based on the observation of opaque mineral assemblage. In addition, the formation condition of quartz veins and opaque minerals is discussed on the basis of the fluid inclusion microthermometry. Samples were selected from drill holes SBD100, SBD168, SBD194, SBD254, and SBD257 to cover the wide vertical range. At the Batu Hijau deposit, quartz veins have been classified mainly into four types called A, B, C and D veins, and the A veins contain mainly bornite, often associated with digenite and chalcocite. In addition, magnetite occurs in A veins. However, at the deep part of the deposit, there are quartz veins associated with magnetite, but few copper sulfides such as bornite and chalcopyrite in quartz veins, as observed in SBD257. Quartz veins at depth in SBD257 have abundant magnetite and pyrite. Pyrite in quartz veins at depth in SBD257 mainly occur at the rim of magnetite grains or interstices between them. In quartz veins in SBD254, there are abundant copper sulfides such as bornite and chalcopyrite in spite of the depth. Bornite and chalcopyrite occur as inclusions in magnetite grains in quartz veins in SBD254. Pyrite which often occurs in low grade zone in quartz veins in SBD254 is also recognized at the rims of copper sulfides. This indicates that pyrite in SBD257 and SBD254 formed later than magnetite. On the other hand, blebs of bornite and chalcopyrite inclusions in magnetite grains, which are recognized in quartz veins in SBD168 at shallow high grade part, suggest that the hydrothermal fluid, from which magnetite was deposited also brought the copper sulfides such as bornite and chalcopyrite to the deep part of the Batu Hijau deposit. Therefore, it is concluded that initially the high grade ore zone extended to depth without localization. However due to the later overprinting hydrothermal activity, copper sulfides and magnetite were replaced or dissolved and pyrite was formed, resulting the low grade zone at the deep part of the deposit. Dissolution temperatures (Td) of halite obtained by from fluid inclusion microthermometry show significant differences between SBD168 and other drill holes. The high Td obtained in SBD168 may indicate larger volume of NaCl crystals in hydrothermal fluid at the time of entrapment of the fluid inclusions and formation of other opaque minerals such as magnetite and copper‐iron sulfides. It suggests that the ratio of vapor to brine is also higher at the shallow part of the deposit. The higher vapor to brine ratio may suggest a higher degree of boiling. Removal of vapor phase separated from brine during boiling increases the concentration of substances dissolved in the brine, and this will result in saturation, as evidenced by the salinity and NaCl saturation. The higher degree of boiling suggested by the higher vapor to brine ratio at shallow part may have increased the copper concentration in the brine that may have lead the saturation, resulted in the deposition of copper‐bearing minerals. 相似文献
12.
Akio Suzuki Eiji Ohtani Hidenori Terasaki Keisuke Nishida Hiromi Hayashi Tatsuya Sakamaki Yuki Shibazaki Takumi Kikegawa 《Physics and Chemistry of Minerals》2011,38(1):59-64
The viscosity of a silicate melt of composition NaAlSi2O6 was measured at pressures from 1.6 to 5.5 GPa and at temperatures from 1,350 to 1,880°C. We employed in situ falling sphere
viscometry using X-ray radiography. We found that the viscosity of the NaAlSi2O6 melt decreased with increasing pressure up to 2 GPa. The pressure dependence of viscosity is diminished above 2 GPa. By using
the relationship between the logarithm of viscosity and the reciprocal temperature, the activation energies for viscous flow
were calculated to be 3.7 ± 0.4 × 102 and 3.7 ± 0.5 × 102 kJ/mol at 2.2 and 2.9 GPa, respectively. 相似文献
13.
This study presents a semi-empirical model for quantifying the reduction in the mechanical strength of bedrock beneath actively eroding soil-mantled hillslopes. The strength reduction of bedrock controls the rate of physical disintegration of saprolite, which supplies fresh minerals that are then exposed to intense chemical weathering in soil sections. To determine the values of parameters employed in the model requires knowledge of the denudation rate of the hillslope, the thickness of the soil and saprolite layers, the strength of fresh bedrock, and the threshold strength for physical erosion at the uppermost face of the saprolite. These parameters can be obtained from cosmogenic nuclide analyses for quartz samples from the soil–saprolite boundary and basic field- and laboratory-based investigations. Further testing of the model within a diverse range of climatic, tectonic, and lithologic environments is likely to provide clues to the mechanisms responsible for local and regional variations in the rates of soil production and chemical weathering upon hillslopes. 相似文献
14.
Bulk density effects on soil hydrologic and thermal characteristics: A numerical investigation 
下载免费PDF全文
下载免费PDF全文 Soil bulk density (ρb) is commonly treated as static in studies of land surface dynamics. Magnitudes of errors associated with this assumption are largely unknown. Our objectives were to (a) quantify ρb effects on soil hydrologic and thermal properties and (b) evaluate effects of ρb on surface energy balance and heat and water transfer. We evaluated 6 soil properties, volumetric heat capacity, thermal conductivity, soil thermal diffusivity, water retention characteristics, hydraulic conductivity, and vapour diffusivity, over a range of ρb, using a combination of 6 models. Thermal conductivity, water retention, hydraulic conductivity, and vapour diffusivity were most sensitive to ρb, each changing by fractions greater than the associated fractional changes in ρb. A 10% change in ρb led to 10–11% change in thermal conductivity, 6–11% change in saturated and residual water content, 49–54% change in saturated hydraulic conductivity, and 80% change in vapour diffusivity. Subsequently, 3 field seasons were simulated with a numerical model (HYDRUS‐1D) for a range of ρb values. When ρb increased 25% (from 1.2 to 1.5 Mg m?3), soil temperature variation decreased by 2.1 °C in shallow layers and increased by 1 °C in subsurface layers. Surface water content differed by 0.02 m3 m?3 for various ρb values during drying events but differences mostly disappeared in the subsurface. Matric potential varied by >100 m of water. Surface energy balance showed clear trends with ρb. Latent heat flux decreased 6%, sensible heat flux increased 9%, and magnitude of ground heat flux varied by 18% (with a 25% ρb increase). Transient ρb impacted surface conditions and fluxes, and clearly, it warrants consideration in field and modelling investigations. 相似文献
15.
Hidekazu Yoshida Koshi Yamamoto Yuki Murakami Nagayoshi Katsuta Toru Hayashi Takeshi Naganuma 《Environmental Geology》2008,55(6):1363-1374
Takashikozo is a phenomenon of Quaternary sediments in Japan. They are cylindrical Fe-oxyhydroxide nodules that form as plaques round
plant roots, where Fe is preferentially concentrated to develop a solid wall. Structural features suggest that after the roots
have decayed, the central space where the roots were situated acts as a flow path for oxidized water. Analysis of microbial
16S rDNA extracted from the nodules identified iron-oxidizing bacteria encrusted round the roots where they are the likely
initiators of nodule formation. Direct microscopic observation revealed an accumulation of Fe-oxyhydroxides that fill the
pore spaces and is also likely to be linked with the encrusting microbial colonies. Geological history and nanofossil evidence
suggest that these Fe-nodules may have been buried at a depth of up to several tens of meters for at least 105 years in reducing Quaternary sediments. Thus Fe-oxyhydroxide nodules that have formed in a geological environment at the
interfaces between water and rock by microbial mediation can persist under reducing conditions. If this is the case, the phenomenon
is significant as an analogue of post-closure conditions in radioactive waste repositories, since it could influence nuclide
migration. 相似文献
16.
Soma Kuwabara Hidenori Terasaki Keisuke Nishida Yuta Shimoyama Yusaku Takubo Yuji Higo Yuki Shibazaki Satoru Urakawa Kentaro Uesugi Akihisa Takeuchi Tadashi Kondo 《Physics and Chemistry of Minerals》2016,43(3):229-236
The sound velocity (V P) of liquid Fe–10 wt% Ni and Fe–10 wt% Ni–4 wt% C up to 6.6 GPa was studied using the ultrasonic pulse-echo method combined with synchrotron X-ray techniques. The obtained V P of liquid Fe–Ni is insensitive to temperature, whereas that of liquid Fe–Ni–C tends to decrease with increasing temperature. The V P values of both liquid Fe–Ni and Fe–Ni–C increase with pressure. Alloying with 10 wt% of Ni slightly reduces the V P of liquid Fe, whereas alloying with C is likely to increase the V P. However, a difference in V P between liquid Fe–Ni and Fe–Ni–C becomes to be smaller at higher temperature. By fitting the measured V P data with the Murnaghan equation of state, the adiabatic bulk modulus (K S0) and its pressure derivative (K S ′ ) were obtained to be K S0 = 103 GPa and K S ′ = 5.7 for liquid Fe–Ni and K S0 = 110 GPa and K S ′ = 7.6 for liquid Fe–Ni–C. The calculated density of liquid Fe–Ni–C using the obtained elastic parameters was consistent with the density values measured directly using the X-ray computed tomography technique. In the relation between the density (ρ) and sound velocity (V P) at 5 GPa (the lunar core condition), it was found that the effect of alloying Fe with Ni was that ρ increased mildly and V P decreased, whereas the effect of C dissolution was to decrease ρ but increase V P. In contrast, alloying with S significantly reduces both ρ and V P. Therefore, the effects of light elements (C and S) and Ni on the ρ and V P of liquid Fe are quite different under the lunar core conditions, providing a clue to constrain the light element in the lunar core by comparing with lunar seismic data. 相似文献
17.
Yuki Kimura Joseph A. Nuth Subrata Chakraborty Mark H. Thiemens 《Meteoritics & planetary science》2007,42(7-8):1429-1439
Abstract— We report the first production of non‐mass‐dependently fractionated silicate smokes from the gas phase at room temperature from a stream of silane and/or pentacarbonyl iron in a molecular hydrogen (or helium) flow mixed with molecular oxygen (or nitrous oxide). The smokes were formed at the Goddard Space Flight Center (GSFC) at total pressures of just under 100 Torr in an electrical discharge powered by a Tesla coil, were collected from the surfaces of the copper electrodes after each experiment and sent to the University of California at San Diego (UCSD) for oxygen isotopic analysis. Transmission electron microscopy studies of the smokes show that they grew in the gas phase rather than on the surfaces of the electrodes. We hypothesize at least two types of fractionation processes occurred during formation of the solids: a mass‐dependent process that made isotopically lighter oxides compared to our initial oxygen gas composition followed by a mass‐independent process that produced oxides enriched in 17O and 18O. The maximum Δ17O observed is + 4.7‰ for an iron oxide produced in flowing hydrogen, using O2 as the oxidant. More typical displacements are 1–2‰ above the equilibrium fractionation line. The chemical reaction mechanisms that yield these smokes are still under investigation. 相似文献
18.
In the seventeenth century, two tsunamis that were generated by earthquakes on the Kuril–Kamchatka subduction zone inundated the eastern coast of Hokkaido, northern Japan. Stratigraphic evidence for these two tsunamis and related land-level change in coastal Hokkaido consists of two landward-thinning sand layers in the sediments of Lake Tokotan, a coastal lagoon on the Hokkaido coast. The marine origin of these sand layers is indicated by the presence of brackish–marine diatoms. The rarity and high degree of fragmentation of diatom valves suggests that the sands were transported in a short time over a considerable distance. Tsunamis at this site were probably generated by great earthquakes along the Kuril–Kamchatka Trench. Volcanic ash deposits lying just above the sands suggest that tsunamis occurred in the late 17th century. Tsunamis during the historic period are not recorded in Lake Tokotan, which suggests that the sand layers were deposited by tsunamis substantially larger than historic tsunamis. 相似文献
19.
Rainfall thresholds for shallow landslide initiation were determined for hillslopes with two types of bedrock, permeable sandstone and impermeable mudstone, in the Boso Peninsula, Japan. The pressure‐head response to rainfall was monitored above a slip scarp due to earlier landslides. Multiple regression analysis estimated the rainfall thresholds for landsliding from the relation between the magnitude of the rainfall event and slope instability caused by the increased pressure heads. The thresholds were expressed as critical combinations of rainfall intensity and duration, incorporating the geotechnical properties of the hillslope materials and also the slope hydrological processes. The permeable sandstone hillslope has a greater critical rainfall and hence a longer recurrence interval than the impermeable mudstone hillslope. This implies a lower potential for landsliding in sandstone hillslopes, corresponding to lower landslide activity. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
20.
Kenichi HOSHINO Yuki YAMAMOTO Xiangping GU Su Young LEE Makoto WATANABE 《Resource Geology》2000,50(3):185-190
Abstract: Possible ore deposition by fluid mixing was preliminarily examined using MIX 99, a FORTRAN program developed for simulating water-rock interactions. We consider mixing of two fluids, the low fO2 and high temperature source fluid and the high fO2 and low temperature seawater. Oxygen fugacity of a mixed fluid formed by titration of seawater into the source fluid gradually decreases with decreasing temperature (model A). Sequential precipitation of ore-forming minerals was examined in this model. On the other hand, simultaneous precipitation of the minerals could be followed by simulation of instantaneous overall mixing of the two fluids (model B). Results of simulation of the both models revealed that a temporal sequence of mineralization observed in the Karuizawa mine, NE Japan, can be formed by model A, while model B is suitable for the mineralization of an active chimney found in the Rainbow hydrothermal area of the Mid-Atlantic Ridge. 相似文献