The effect of seasonally frozen soil on stochastic response of elevated water tank under random excitation   总被引：1，自引：1，他引：0  

Kemal Hacıefendioğlu  Murat Emre Kartal  Zeki Karaca 《Stochastic Environmental Research and Risk Assessment (SERRA)》2013,27(4):807-818

Significant seismic events have occurred around the world during winter months in regions where cold temperatures cause ground freezing. Current seismic design practice does not address the effects of cold temperatures in the seasonally frozen areas. Since many elevated water tank structures in cold regions are located in seismic active zones, determining the effect of seasonally frozen soil on the stochastic response of elevated water tank structures subjected to random seismic excitation is an important structural consideration. A three dimensional finite element model, which considers viscous boundaries, was built up to obtain the stochastic seismic behavior of an elevated water tank–fluid–soil interaction system for frozen soil condition. For this model, the power spectral density function represents random ground motion applied to each support point of the three dimensional finite element model of the elevated water tank–fluid–soil interaction system. Numerical results show that the soil temperature affects the seismic response of the elevated water tank; whereas the variation in the thickness of the frozen soil causes insignificant changes on the response. In addition, the effect of the variation in water tank’s fullness on the stochastic response of the coupled system is investigated in the study. As a result, the seasonal frost changes the foundation soil stiffness and may impact seismic behavior of the water tank.  相似文献   

Comparison of 2D versus 3D modeling approaches for the analysis of the concrete faced rock‐fill Cokal Dam     

Yalin Arici  Halil Fırat Özel 《地震工程与结构动力学》2013,42(15):2277-2295

This paper's primary purpose is to compare the 2D and 3D analysis methodologies in investigating the performance of a concrete faced rock‐fill dams under dynamic loading conditions. The state of stress on the face plate was obtained in both cases using a total strain based crack model to predict the spreading of cracks on the plate and the corresponding crack widths. Results of the 2D and 3D analyses agree well. Although significantly more demanding, 3D analyses have the advantage of predicting the following: (i) the opening of the vertical construction joints; (ii) the cracking at the valley sides; and (iii) the crushing of the plate during the seismic action. During the earthquake loading, the cracking predicted at the base of the face plate after the impounding spread significantly towards the crest of the dam; however, the crack widths are obtained relatively small. Crushing of the face plates at the construction joints is the primary cause of the large scale cracking predicted on the face plate for high intensity earthquakes. Earthquake induced permanent deformation of the fill increases the compressive stresses on the face plate, thereby reducing the minute cracking on the plate. However, this effect also leads to significant increases in the residual openings at the construction joints and at the plinth level. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Reliability of calibration of a monthly rainfall-runoff model: the semiarid case / Validité de l'étalonnage d'un modèle pluie-débit à pas de temps mensuel: cas d'un bassin semi aride     

A. H. M. GÖRGENS 《水文科学杂志》2013,58(4):485-498

ABSTRACT

A monthly conceptual rainfall—runoff model that enjoys fairly widespread use in South Africa was calibrated for each of 50 calibration samples of lengths 3–20 years, drawn from a synthetic 101-year semiarid streamflow time series generated with the Stanford Watershed Model. The ability of Pitman's model to reconstruct the original 101 years of monthly streamflow for each of the 50 calibrations was then examined against a set of statistics of monthly and annual streamflows. The variabilities of key model parameters associated with different lengths of calibration period were also investigated. The results show that it is well worthwhile to increase the calibration period to about 15 years in order to reduce errors in reconstructed flow statistics. Merely increasing the length of calibration period from 6 to 10 years may decrease the error in most regenerated flow statistics by 30–50%. A fair amount of variability in “optimum” parameters, however, seems unavoidable, even at longer calibration periods, though this may also partly be due to imperfect model calibration. The effects of this variability are greatly attenuated in the reconstructed flow statistics due to parameter interdependence.  相似文献   

On the Use of Crushed Recycled Glass Instead of Silica Sand in Dual‐Media Filters     

Elif Soyer  Ömer Akgiray  Nursen Öz Eldem  Ahmet Mete Saatçı 《洁净——土壤、空气、水》2013,41(4):325-332

Crushed recycled glass was evaluated as an alternative to silica sand in dual‐media filters. Pilot scale inline filtration experiments were carried out using raw waters from three different water sources with turbidities between 6.0 and 14.0 NTU. Two physically identical filter columns were operated in parallel in the experiments. One filter consisted of 62.5 cm silica sand and 41.5 cm anthracite coal, whereas the other filter contained 62.5 cm crushed recycled glass plus 41.5 cm anthracite coal. The total bed depth was 104 cm for both filters. The properties of the media were as follows: Glass effective size = 0.77 mm, uniformity coefficient = 1.41. Sand effective size = 0.79 mm, uniformity coefficient = 1.33. Coal effective size = 1.45 mm, uniformity coefficient = 1.39. Experiments were repeated five times as follows: (i) Without the use of a coagulant, (ii–iii) with 5 and 10 mg/L of alum, and (iv–v) with 5 and 10 mg/L of ferric chloride. The filtration rate used was 11.5 m/h. Turbidity, particle counts, and head losses were measured and compared as functions of time. The following were observed: (i) Effluent turbidities and particle counts of the two filters were very close, i.e., essentially the same effluent quality was obtained when crushed glass was used instead of silica sand. (ii) In the majority of the tests, the filter with crushed glass generated both a smaller clean‐bed head loss and smaller clogging head losses than those of the filter containing sand. It is concluded that crushed glass may be a good alternative to silica sand in dual‐media filtration.  相似文献   

Sedimentological and ichnological signatures of changes in wave,river and tidal influence along a Neogene tropical deltaic shoreline     

LUIS A. BUATOIS  NUBIA SANTIAGO  MEYLIN HERRERA  PIRET PLINK‐BJÖRKLUND  RON STEEL  MARÍA ESPIN  KAOLU PARRA 《Sedimentology》2012,59(5):1568-1612

Analysis of Neogene cores from the Eastern Venezuela Basin along 65 km of a west–east trending shoreline allows characterization of the sedimentological and ichnological signatures of wave, river and tidal processes. The area displays deltas prograding northward from the Guyana Shield. Twenty‐three facies are defined and grouped into four categories (wave‐influenced, river‐influenced, tide‐influenced and basinal). Wave‐dominated deltaic deposits occur mostly in the Tácata Field. The delta plain was characterized by tide‐influenced distributary channels separated by interdistributary bays. Fluvial discharge in the delta front and prodelta was repeatedly interrupted by storm‐wave reworking and suspended sediment fallout. Delta‐front and prodelta deposits contain some ichnotaxa that typically do not occur in brackish water (for example, Chondrites and Phycosiphon). Amalgamated storm deposits are unburrowed or contain vertical Ophiomorpha. Lateral (especially on the updrift side) to the river mouths, waves caused nearly continuous accretion of the associated strandplains. These deposits are the most intensely bioturbated, and are dominated by the estenohaline echinoid‐generated ichnogenus Scolicia. River‐dominated deltaic deposits are present in the Santa Bárbara, Mulata, Carito and El Furrial Fields. Low‐sinuosity rivers characterized the alluvial plain, whereas the subaerial delta plain was occupied by higher‐sinuosity rivers. The subaqueous delta plain includes distributary channels and tide‐influenced interdistributary bays. Further seaward, successions are characterized by terminal distributary‐channel and distributary mouth‐bar deposits, as well as by delta‐front and prodelta deposits showing evidence of sediment gravity‐flow and fluid‐mud emplacement. Delta‐front and prodelta deposits are unbioturbated to sparsely bioturbated, suggesting extreme stress, mostly as a result of high fluvial discharge and generation of sediment gravity flows. Tidal influence is restricted to interdistributary bays, lagoons and some distributary channels. From an ichnological perspective, and in order of decreasing stress levels, four main depositional settings are identified: river‐dominated deltas, tide‐influenced delta plains, wave‐dominated deltas and wave‐dominated strandplain–offshore complexes.  相似文献   

Preface: clay mineral diagenesis and very low-grade metamorphic processes. Proceedings of the 2011 Frey–Kübler symposium     

Rafael Ferreiro M?hlmann  Fernando Nieto  ?mer Bozkaya  Sébastien Potel  Asuman Günal Türkmeno?lu 《Swiss Journal of Geoscience》2012,105(2):117-120

  相似文献   

Investigating Correlations and Variations of Air Pollutant Concentrations under Conditions of Rapid Industrialization – Kocaeli (1987–2009)     

Şenay Çetin Doğruparmak  Bilge Özbay 《洁净——土壤、空气、水》2011,39(7):597-604

In this study, it was aimed to characterize temporal variations of air pollutants for determining contribution to pollution episodes and to obtain correlations between these pollutants. With this aim we used data analysis for measured sulfur dioxide (SO₂), particulate matter (PM, black fume and PM10), nitrogen oxides (NO_x), ozone (O₃), carbon monoxide (CO), methane (CH₄), and non‐methane hydrocarbons (NMHC) recorded in Kocaeli, one of the most industrilizated cities of Turkey. Pollutant concentrations were the results of continuous and semi‐automatic measurements. Semi‐automatic measurements of SO₂ and PM (black fume) were enclosing period from 1987 to 2008 whereas continuous monitoring of all pollutants included years of 2007–2009. In the first stage of the study daily, monthly, annual, and seasonal variations of pollution were researched. Annual average concentrations were compared with limits set by Air Quality Protection Regulation (AQPR), Air Quality Evaluation and Management Regulation (AQEMR), World Health Organization (WHO), European Union (EU), and National Ambient Air Quality Standards (USEPA). In the following stage relationships between pollutants such as NO₂–O₃, NO_x–CO, NO_x–NMHC, and NO_x–SO₂ were investigated and correlation coefficients were determined as 0.87, 0.56, 0.51, and 0.69, respectively. R² values of regression models developed from these correlations were 0.78, 0.56, 0.34, and 0.72, respectively. Vehicle density of the traffic was evaluated with NO_x–O₃ emissions and decrease was seen in NO_x emissions due to decreasing vehicle density at weekends whereas O₃ concentrations increased. These correlations enable prediction of the parameters that cannot be measured which is important for providing improvement in early warning systems.  相似文献   

Geophysical and geological imprints of southern Neotethyan subduction between Cyprus and the Isparta Angle, SW Turkey   总被引：1，自引：0，他引：1  

Ü. Yal&#x;n Kalyoncuolu   mer Elitok  M. Nuri Dolmaz  N. Ceyla Anadolu 《Journal of Geodynamics》2011,52(1):70-82

  相似文献   

A parametric study on seakeeping assessment of fast ships in conceptual design stage     

Sadık Özüm  Bekir Şener  Hüseyin Yilmaz 《Ocean Engineering》2011,38(13):1439-1447

The paper presents an approach to investigate the effects of some parameters on seakeeping assessment of fast ships in conceptual design stage. Hull form parameters have been classified into two groups: main dimensions (L, B and T) and secondary form parameters (LCB and C_P). To demonstrate the approach a fast ship is redesigned as parent hull and alternative hull forms are generated by changing these parameters systematically. Some hull forms are selected related the geometric limits and seakeeping analyzes are here investigated and discussed. The obtained results are satisfactory for seakeeping predictions during the conceptual design stage.  相似文献   

Stratigraphy and palaeoenvironment of the Lower-“middle” Oligocene units in the northern part of the Western Taurides (İncesu area,Isparta, Turkey)     

Mehmet Serkan Akkiraz  Funda Akgün  Sefer Örçen 《Journal of Asian Earth Sciences》2011,40(2):452-474

This study describes the stratigraphic and palaeoenvironmental significance of the Lower-“middle” Oligocene sediments based on the fauna from the Delikarkas? Formation and the microflora from the ?ncesu Formation of the ?ncesu area (northern part of the western Taurides, Isparta province, Turkey). In the area, the Oligocene sediments show a regressive succession, which begins with the limestones of the Delikarkas? Formation indicating marine conditions followed by conglomerates, sandstones and coaly mudstones of alluvial and fluvial (shallow marine-continental) origin. A well preserved foraminiferal assemblage including Nummulites intermedius, Nummulites vascus and Halkyardia maxima proves an Early Oligocene age for the Delikarkas? Formation. Due to palynological markers such as Boehlensipollis hohli, Slowakipollis hippophaëoides, Dicolpopollis kockelii, Magnolipollis neogenicus ssp. minor, Plicapollis pseudoexcelsus, Caryapollenites simplex and Intratriporopollenites instructus the ?ncesu Formation, which concordantly rests on the Delikarkas? Formation, may be assigned to the Early-“middle” Oligocene. From the palynomorph assemblage, three zones have been recognised according to abundance of species. Zone 1 is characterized by predominance of C. simplex and Momipites punctatus and rarely presence of tricolpate and tricolporate pollen. Zone 2 consists mainly of Inaperturopollenites dubius, Leiotriletes maxoides ssp. maximus, Verrucatosporites favus, Verrucatosporites alienus and infrequently marine dinoflagellate cysts. Zone 3 is characterized by a high percentage of ferns such as Echinatisporis?chattensis and Polypodiaceoisporites saxonicus. The presence of marine dinoflagellate cysts like Apectodinium sp. and Cleistosphaeridium sp., back-mangrove elements such as Acrostichum aureum and lepidocaryoid palms (e.g. Longapertites discordis, Longapertites punctatus and Longapertites psilatus) in the sediments of the ?ncesu Formation imply coastal or near-coastal conditions. Terrestrial palynomorphs in more inland settings were transported by running water towards the sea. Conifers are represented by poorly preserved and rare pollen grains of Pityosporites, Cathayapollis and Piceapollis which may have been transported by wind. In this study, the terrestrial climate of the ?ncesu Formation is also discussed on the basis of the Coexistence Approach method. The climate was warm at the coast (over 20 °C), as evidenced by A. aureum and lepidocaryoid palms, whereas there was a mean annual temperature of 17.2–17.4 °C must be assumed for the upland environment(s).  相似文献