Electro-chemical mineralization of recalcitrant indole by platinum-coated titanium electrode: multi-response optimization,mechanistic and sludge disposal study     

A. D. Hiwarkar  S. Singh  V. C. Srivastava  C. Thakur  I. D. Mall  S.-L. Lo 《International Journal of Environmental Science and Technology》2018,15(2):349-360

Indole is a highly recalcitrant aromatic heterocyclic organic compound consisting of a five-membered nitrogen-containing pyrrole ring fused to a six-membered benzene ring. This study presents the results of the electro-chemical mineralization of indole in an aqueous solution using platinum-coated titanium (Pt/Ti) electrode. A central composite design was used to investigate the effect of four parameters namely initial pH (pH_o), current density (j), conductivity (k) and treatment time (t) at 5 levels. Multiple responses namely chemical oxygen demand (COD) removal (Y ₁) and specific energy consumption (Y ₂) were simultaneously maximized and minimized, respectively, by optimizing the parameters affecting the mineralization of indole by using the desirability function approach. At the operating conditions of pH 8.6, j = 161 A/m², k = 6.7 mS/cm and t = 150 min, 83.8% COD removal with specific energy consumption of 36.3 kWh/kg of COD removed was observed. Ultra performance liquid chromatography, UV–visible spectroscopy, Fourier transform infrared spectroscopy and cyclic voltammetry of the indole solution were performed at the optimum condition of the treatment so as to report a plausible mechanism of indole degradation. Field emission scanning electron microscopy analysis of electrodes before and after treatment was performed for determining the changes on anode surface during the treatment. Thermal analysis of the solid residue (scum) obtained was also performed for exploring its disposal prospects. Present study shows that electro-chemical oxidation can be used for mineralization of nitrogenous heterocyclic compounds such as indole.  相似文献   

High-performing antifouling bacterial consortium for submerged membrane bioreactor treating synthetic wastewater     

H. Waheed  S. Pervez  I. Hashmi  S. J. Khan  S.-R. Kim 《International Journal of Environmental Science and Technology》2018,15(2):395-404

Biofouling, associated with membranes, is considered as a major operational challenge in membrane bioreactor (MBR) technology. Interrupting the process for the formation of biofilm by the action of interspecies quorum quenching (QQ) has received a significant attention since recent years. An antifouling bacterial consortium was identified to improve biofouling inhibition performance during MBR operation. For this purpose, various QQ bacteria were isolated from laboratory-scale MBR using enrichment culture method and identified via 16S rRNA. Potential quenching strains including Enterobacter cloaca, Delftia sp., and Pseudomonas sp. were utilized to control biofouling in the MBR operated in the continuous mode for 38 days. Three laboratory-scale MBRs, including two MBRs with different anti fouling consortium and a control, were operated in parallel under similar operating conditions. Biofouling control by QQ bacteria was compared based on the membrane permeability and EPS secretion from biofilm on the membrane. Both MBRs with antifouling consortium (AC-MBRs) experienced around three times less biofouling as compared to conventional MBR leading to significant decrease in acyl homoserine lactones (AHLs) concentration in the biocake. More than 90, 45, and 49% of COD, NH₄–N, and PO₄ ^3?–P removal efficiencies elucidate that QQ bacterial consortium could effectively reduce membrane biofouling without compromising the MBR efficiency. Comparatively lower concentration of bound EPS in AC-MBRs restricted the bacterial adhesion to membrane resulting in enhanced membrane permeability depicting that a broader range of signal molecules could be hydrolyzed using antifouling consortium than single or no QQ strain in the submerged MBR.  相似文献   

Comparison of different models of water quality index in the assessment of surface water quality     

I. I. Mladenović-Ranisavljević  S. A. Žerajić 《International Journal of Environmental Science and Technology》2018,15(3):665-674

The method of water quality index is widely used in evaluation of the surface water quality because of its capability to summarize a number of water quality parameters into one numeric value, along with defined scale of water quality range. The current investigation includes application of modified model for calculating water quality index values, generated using experimental data and literary models. Software was created using modular design. Fourteen physical, chemical and biological parameters representing water quality state along with the assigned weights were elected. Comparison between models generated based on Serbian and American models of water quality index was done. Selected parameters differ mutually in number of parameters used in calculation of index, as well as in values of the weighting factors. In order to enable an efficient water quality analysis and to reconcile the requirements of both Serbian and American model, two software solutions were generated and processed on the example of the water quality of the Danube River in Serbia. Danube water quality was assessed at seventeen measuring locations along the river flow. Index values obtained from the two generated software applications were compared with the results of the official Serbian online calculator. Water quality determined using new generated models shows stricter approach and one class lower water quality compared to the existing Serbian model. Therefore, modular and open-generated simulation software is of great significance for the comparison and testing of different water quality models, not just those two shown in this study.  相似文献   

Management of shock loads wastewater produced from water heaters industry     

S. I. Abou-Elela  S. A. El-Shafai  M. E. Fawzy  M. S. Hellal  O. Kamal 《International Journal of Environmental Science and Technology》2018,15(4):743-754

Water heater manufacturing represents one sector of household electrical appliance industry. It includes several batch processes which resulted in a highly polluted wastewater as shock loads. The objective of this study was to manage the shock loads wastewater with a simple and cost-effective approach prior to final discharge into municipality. To achieve this objective, two approaches were studied. The first approach was the chemical treatment of the accumulated shock loads wastewater using alum and an anionic polymer. Although this approach produced a very high-quality effluent, it was economically and technically infeasible. The second approach was a controlled release of the shock loads to the normal daily discharge in a way that guarantees the compliance of the end-off-pipe with the National Regulatory Standards. This solution required establishment of an equalization tank for normal daily flow and a holding tank for controlled release of the shock loads. Mathematical calculations were carried out to determine the most violating parameters in order to calculate the mixing ratio the of shock loads with the normal daily flow. Full engineering design of the proposed solution was carried out. This approach was implemented and proved to be simple, easy to operate, cost-effective and can be replicated in similar batch processing manufacturing plants.  相似文献   

Isolation of <Emphasis Type="Italic">Bacillus cereus</Emphasis> from botanical soil and subsequent biodegradation of waste engine oil     

S. Bhurgri  F. N. Talpur  S. M. Nizamani  H. I. Afridi  M. A. Surhio  Muhammad Raza Shah  C. W. Bong 《International Journal of Environmental Science and Technology》2018,15(7):1453-1466

Waste engine oil causes a vital environmental pollution when it spill during change and transportation and products of waste engine oil causes lethal effects to the living systems. Thus, abiotic and biotic approaches are being extensively used for removal of waste engine oil pollution. Therefore in present study, waste engine oil degradation was accomplished by a new bacterial culture, isolated from the soil by an enrichment technique. Morphological, biochemical and gene sequence analysis revealed that isolate was Bacillus cereus. Subsequently, biodegradation potential of B. cereus for waste engine oil was studied. Experimental variables, such as pH, substrate concentration, inoculum size, temperature and time on the biodegradation, were checked in mineral salt medium. The biodegradation efficiency of B. cereus was determined by gravimetry, UV–visible spectrophotometry and gas chromatography. In addition, waste engine oil was also characterized by GC–MS and FTIR for its major constituents, which showed total 38 components in waste engine oil, including hopanes, benzopyrene, long-chain aliphatic hydrocarbons, dibenzothiophenes, biphenyl and their derivatives. Results of successive biodegradation indicated that B. cereus was capable to degrade 1% of waste engine oil with 98.6% degradation potential at pH 7 within 20 days. Hence, B. cereus presents an innovative tool for removing the engine oil from the contaminated area.  相似文献   

Non-woven polypropylene fabric modified with carbon nanotubes and decorated with nanoakaganeite for arsenite removal     

J. Tomaszewska  P. Smektała  I. Zgłobicka  J. Michalski  K. J. Kurzydłowski  P. Krzemiński  C. Escudero-Oñate 《International Journal of Environmental Science and Technology》2018,15(9):1831-1842

Due to its harmful impact on human health, the presence of heavy metals, metalloids and other toxic pollutants in drinking or irrigation water is a major concern. Recent studies have proved that nanosized adsorbents are significantly more effective than their microsized counterparts. Particular attention has been given to nanocomposites with nanoadsorbents embedded in matrixes that could provide stability to the material and contribute to eliminating problems that may appear when using conventional granular systems. This study presents the preparation of a novel hybrid filter from a commercially available polypropylene (PP) non-woven fabric matrix modified with multiwall carbon nanotubes (MWCNT) and iron oxy(hydroxide) nanoparticles, and its use in the removal of As(III). A Box–Behnken statistical experimental design has been chosen to explore relevant variables affecting the filter performance: (1) As(III) concentration, (2) pH and (3) sorbent dose. From an As(III) concentration of 10 mg L^?1, at pH 6.5 and with a sorbent dose of 5 g L^?1, the PP filter modified with MWCNT removes 10% of the initial metalloid concentration, reaching a capacity of 0.27 mg g^?1. After modification with iron oxy(hydroxide), the performance of the material is largely enhanced. The filter, under the same conditions, removes 90% of the initial As(III) concentration, reaching a capacity almost tenfold higher (2.54 mg g^?1). This work demonstrates that the developed hybrid filter is effective toward the removal of As(III) in a wide range of pHs. A cubic regression model to compute the removal of the filter as a function of pH and sorbent dose is provided.  相似文献   

Paleogene–Neogene Boundary of Primorye,Russian Far East     

B. I. Pavlyutkin  T. I. Petrenko  I. Yu. Chekryzhov 《Russian Journal of Pacific Geology》2018,12(2):119-134

Complex geological and paleobotanic analysis of sections of the boundary Oligocene–Miocene sediments of southern Primorye is conducted. The presence of a stratigraphic hiatus is identified in the transitional complexes of the Pushkino and Pavlovka depressions but not in the sections of the Rakovka depression; thus, it is suggested to use one of them (borehole no. 15) to choose the stratotype of the Paleogene–Neogene boundary. The previous conclusion on the presence of economic coal deposits of Primorye within the Paleogene part of the Tertiary complex is supported. It is suggested to use the section which is exposed by the Rakovka brown coal open pit (point 9209) as a stratotype of the upper subformation of the Pavlovka Formation.  相似文献   

New Data on the Ages of the Matituk and Pomyr Formations of Northern Sakhalin     

P. Yu. Kovtunovich  L. M. Chumakov  I. B. Tsoy 《Russian Journal of Pacific Geology》2018,12(4):303-319

  相似文献   

Assessment of spatial distribution of contaminants and their levels in soil and water resources of Calabar,Nigeria using geophysical and geological data     

Anthony E. Akpan  A. N. Ugbaja  E. I. Okoyeh  N. J. George 《Environmental Earth Sciences》2018,77(1):13

The contamination levels of soils and water resources in Calabar, Nigeria have been investigated using resistivity (vertical electrical sounding and electrical resistivity tomography), geochemical analyses of soil and water resources and textural analysis. Sixty randomly sited VES sites were investigated in two seasons while ERT investigations were performed along four profiles. The geochemical investigations were spread across seasons in order to track seasonal changes in physico-chemical parameters: hydrogen ion concentration (pH), electrical conductivity, total dissolved solids, chloride ion (Cl^?), nitrate ion (\( {\text{NO}}_{ 3}^{ - } \)), bicarbonate (\( {\text{HCO}}_{ 3}^{ - } \)), sulphate ion (\( {\text{SO}}_{ 4}^{2 - } \)), calcium ion (Ca²⁺), sodium ion (Na⁺), potassium ion (K⁺) and magnesium ion (Mg²⁺). Additionally, concentrations of ammonium, aluminium and nitrite ions in soils were determined. Results show that ionic concentrations in the sand-dominated soils and water are within permissible limits and baseline standards. The resistivities follow known trends in the area. However, at the central waste disposal site, a localised thin (< 5 m), low resistivity (< 15 Ωm) anomaly suspected to be due to contamination by leachates was observed. Comparatively, the contaminated area is also characterised by marginal increase in ionic concentrations. Strong attenuation capacities of overlying and adjoining clay/lateritic sediments and optimal design of the waste dump site probably reduced the spread of contaminants. The contaminated zone need to be closely monitored so that it does not extend to the aquifers. Hence, all strategies presently being used in managing wastes in Calabar should be sustained.  相似文献   

Effects of historical and projected land use/cover change on runoff and sediment yield in the Netravati river basin,Western Ghats,India     

Rakesh Kumar Sinha  T. I. Eldho 《Environmental Earth Sciences》2018,77(3):111

In this study, the effects of changes in historical and projected land use land cover (LULC) on monthly streamflow and sediment yield for the Netravati river basin in the Western Ghats of India are explored using land use maps from six time periods (1972, 1979, 1991, 2000, 2012, and 2030) and the soil and water assessment tool (SWAT). The LULC for 2030 is projected using the land change modeller with the assumption of normal growth. The sensitivity analysis, model calibration, and validation indicated that the SWAT model could reasonably simulate streamflow and sediment yield in the river basin. The results showed that the spatial extent of the LULC classes of urban (1.80–9.96%), agriculture (31.38–55.75%), and water bodies (1.48–2.66%) increased, whereas that of forest (53.04–27.03%), grassland (11.17–4.41%), and bare land (1.09–0.16%) decreased from 1972 to 2030. The streamflow increased steadily (7.88%) with changes in LULC, whereas the average annual sediment yield decreased (0.028%) between 1972 and 1991 and increased later (0.029%) until 2012. However, it may increase by 0.43% from 2012 to 2030. The results indicate that LULC changes in urbanization and agricultural intensification have contributed to the increase in runoff, amounting to 428.65 and 58.67 mm, respectively, and sediment yield, amounting to 348 and 43 ton/km², respectively, in the catchment area from 1972 to 2030. The proposed methodology can be applied to other river basins for which temporal digital LULC maps are available for better water resource management plans.  相似文献