Laboratory experiments of sediment transport from bare soil with a rill     

Hafzullah Aksoy  N. Erdem Unal  Sevket Cokgor  Abdullah Gedikli  Kaan Koca 《水文科学杂志》2013,58(7):1505-1518

Abstract

Mathematical models developed for quantification of sediment transport in hydrological watersheds require data collected through field or laboratory experiments, but these are still very rare in the literature. This study aims to collect such data at the laboratory scale. To this end, a rainfall simulator equipped with nozzles to spray rainfall was constructed, together with an erosion flume that can be given longitudinal and lateral slopes. Eighty experiments were performed, considering microtopographical features by pre-forming a rill on the soil surface before the start of each experiment. Medium and fine sands were used as soil, and four rainfall intensities (45, 65, 85 and 105 mm h^-1) were applied in the experiments. Rainfall characteristics such as uniformity, granulometry, drop velocity and kinetic energy were evaluated; flow and sediment discharge data were collected and analysed. The analysis shows that the sediment transport rate is directly proportional to rainfall intensity and slope. In contrast, the volumetric sediment concentration stays constant and does not change with rainfall intensity unless the slope changes. These conclusions are restricted to the conditions of experiments performed under rainfall intensities between and 105 mm h^-1 for medium and fine sands in a 136-cm-wide, 650-cm-long and 17-cm-deep erosion flume with longitudinal and lateral slopes varying between 5 and 20%.

Editor Z.W. Kundzewicz; Associate editor G. Mahé

Citation Aksoy, H., Unal, N.E., Cokgor, S., Gedikli, A., Yoon, J., Koca, K., Inci, S.B., Eris, E., and Pak, G., 2013. Laboratory experiments of sediment transport from bare soil with a rill. Hydrological Sciences Journal, 58 (7), 1505–1518.  相似文献   

Climate-resilient agricultural water management to alleviate negative impacts of global warming in rice production systems     

Mirfenderski  Ramtin  Darzi-Naftchali  Abdullah  Karandish  Fatemeh 《Theoretical and Applied Climatology》2022,147(1-2):409-422

Theoretical and Applied Climatology - Improving the economic productivity of limited available freshwater through producing more rice with less water is essential to sustain paddy production...  相似文献   

Geochemical exploration for hydrocarbons in the soils of southeast of Krishna-Godavari Basin, Andhra Pradesh     

M. Lakshmi  M. A. Rasheed  T. Madhavi  B. Rajeswara Reddy  M. S. Kalpana  D. J. Patil  A. M. Dayal 《Journal of the Geological Society of India》2012,80(5):641-652

Surface adsorbed gas surveys and geo-microbiological surveys are known techniques of petroleum exploration and aim towards risk reduction in exploration by way of identifying the areas warm with hydrocarbons and to establish intense exploration priorities amongst the identified warm areas. The present investigation aims to explore correlation between the adsorbed gas distribution pattern with the distribution of the counts of methane, ethane, propane and butane microbial oxidizers in the sub soil samples to establish the role of the latter in identifying the upward migration of hydrocarbons especially in the known petroliferous Krishna-Godavari Basin, India. A total of 135 soil samples were collected near oil and gas fields of Tatipaka, Pasarlapudi areas of Krishna Godavari Basin, Andhra Pradesh. The soil samples were collected from a depth of 2?C2.5 m. The samples collected, were analyzed for indicator hydrocarbon oxidizing bacteria, adsorbed light gaseous hydrocarbons and carbon isotopes (??¹³C_methane). The microbial prospecting studies showed the presence of high bacterial population for methane (3.94 × 10⁵ cfu/gm), ethane (3.85 × 10⁵ cfu/gm), propane (4.85 × 10⁵ cfu/gm) and butane oxidizing bacteria (3.63 × 10⁵ cfu/gm) in soil samples indicating microseepage of hydrocarbons. The light gaseous hydrocarbon analysis showed 83 ppb, 92 ppb, 134 ppb, 187 ppb and 316 ppb of C₁, C₂, C₃, nC₄ and nC₅, respectively, and the carbon isotopic composition of ??¹³C₁ of the samples ranged between ? 36.6 ?? to ?22.7?? (Pee Dee Belemnite) values, which presents convincing evidence that the adsorbed soil gases collected from these sediments are of thermogenic origin. Geo-microbial prospecting method and adsorbed soil gas and carbon isotope studies have shown good correlation with existing oil/ gas fields of K.G basin. Microbial surveys indicating microseepage of hydrocarbons can, therefore, independently precede other geochemical and geophysical surveys to delineate areas warm with hydrocarbons and mapped microbiological anomalies may provide focus for locales of hydrocarbon accumulation in the K.G basin.  相似文献   

Seismic design factors for RC special moment resisting frames in Dubai, UAE     

Mohammad AlHamaydeh  Sulayman Abdullah  Ahmed Hamid  Abdilwahhab Mustapha 《地震工程与工程振动(英文版)》2011,10(4):495-506

This study investigates the seismic design factors for three reinforced concrete (RC) framed buildings with 4, 16 and 32-stories in Dubai, UAE utilizing nonlinear analysis. The buildings are designed according to the response spectrum procedure defined in the 2009 International Building Code (IBC’09). Two ensembles of ground motion records with 10% and 2% probability of exceedance in 50 years (10/50 and 2/50, respectively) are used. The nonlinear dynamic responses to the earthquake records are computed using IDARC-2D. Key seismic design parameters are evaluated; namely, response modification factor (R), deflection amplification factor (Cd), system overstrength factor (Ωo), and response modification factor for ductility (Rd) in addition to inelastic interstory drift. The evaluated seismic design factors are found to significantly depend on the considered ground motion (10/50 versus 2/50). Consequently, resolution to the controversy of Dubai seismicity is urged. The seismic design factors for the 2/50 records show an increase over their counterparts for the 10/50 records in the range of 200%-400%, except for the Ωo factor, which shows a mere 30% increase. Based on the observed trends, period-dependent R and Cd factors are recommended if consistent collapse probability (or collapse prevention performance) in moment frames with varying heights is to be expected.  相似文献   

2-D electrical imaging in some geotechnical investigation of Madhupur clays,Bangladesh   总被引：1，自引：0，他引：1  

A. S. M. Shamaun Kabir  Delwar Hossain  Rashed Abdullah 《Journal of the Geological Society of India》2011,77(1):73-81

Electrical imaging or electrical tomography is a survey technique suitable for the investigation of areas of shallow complex geology, where the use of other electrical and electromagnetic techniques is less effective. An electrical image has been delineated at a site located in front of the Department of Geological Sciences, Jahangirnagar University, Dhaka, Bangladesh. 16 soil samples were collected from two boreholes located on the image line and geotechnical parameters such as unit weight, water content, grain size, plastic limit, liquid limit and plasticity index were measured in the laboratory. These geotechnical parameters were compared with the measured electrical resistivity.  相似文献   

CFD simulation and experimental analysis of flow dynamics and grinding performance of opposed fluidized bed air jet mill     

M. Sri Raj Rajeswari  K.A.M. Azizli  S.F.S. Hashim  M.K. Abdullah  M. Abdul Mujeebu  M.Z. Abdullah 《International Journal of Mineral Processing》2011,98(1-2):94-105

This paper presents a three dimensional Computational Fluid Dynamics (CFD) model to investigate the flow dynamics of solid–gas phases during fine grinding in an air jet mill. Alpine 100AFG fluidized bed air jet mill is considered for the study and the jet milling model is simulated using FLUENT 6.3.2 using a standard k-ε model. The model is developed in GAMBIT 2.3.16 and meshed by tet/hybrid (T-Grid) and Triangular (Pave) meshes. The effects of operating parameters such as solid feed rate, grinding air pressure and internal classifier speed on the performance of the jet mill are analyzed. The CFD simulation results are presented in the forms of dual phase vector plot, volume fraction of phases and particle trajectories during fine grinding process. The mass of ground feed entering and leaving the cyclone (underflow) is also computed by simulation. The proposed model gives realistic predictions of the flow dynamics within the jet mill. Experiments are conducted on the Alpine 100AFG jet mill to study the particle size, morphology and mass of the ground product. The numerical results are found in good agreement with the experimental results.  相似文献   

Soil Iodine Determination in Deccan Syneclise,India: Implications for Near Surface Geochemical Hydrocarbon Prospecting     

Devleena Mani  T. Satish Kumar  M. A. Rasheed  D. J. Patil  A. M. Dayal  T. Gnaneshwar Rao  V. Balaram 《Natural Resources Research》2011,20(1):75-88

The association of iodine with organic matter in sedimentary basins is well documented. High iodine concentration in soils overlying oil and gas fields and areas with hydrocarbon microseepage has been observed and used as a geochemical exploratory tool for hydrocarbons in a few studies. In this study, we measure iodine concentration in soil samples collected from parts of Deccan Syneclise in the west central India to investigate its potential application as a geochemical indicator for hydrocarbons. The Deccan Syneclise consists of rifted depositional sites with Gondwana–Mesozoic sediments up to 3.5 km concealed under the Deccan Traps and is considered prospective for hydrocarbons. The concentration of iodine in soil samples is determined using ICP-MS and the values range between 1.1 and 19.3 ppm. High iodine values are characteristic of the northern part of the sampled region. The total organic carbon (TOC) content of the soil samples range between 0.1 and 1.3%. The TOC correlates poorly with the soil iodine (r ² < 1), indicating a lack of association of iodine with the surficial organic matter and the possibility of interaction between the seeping hydrocarbons and soil iodine. Further, the distribution pattern of iodine compares well with two surface geochemical indicators: the adsorbed light gaseous hydrocarbons (methane through butane) and the propane-oxidizing bacterial populations in the soil. The integration of geochemical observations show the occurrence of elevated values in the northern part of the study area, which is also coincident with the presence of exposed dyke swarms that probably serve as conduits for hydrocarbon microseepage. The corroboration of iodine with existing geological, geophysical, and geochemical data suggests its efficacy as one of the potential tool in surface geochemical exploration of hydrocarbons. Our study supports Deccan Syneclise to be promising in terms of its hydrocarbon prospects.  相似文献   

A simplified approach to design fuzzy logic controller for an underwater vehicle   总被引：1，自引：0，他引：1  

K. Ishaque  S.S. Abdullah  S.M. Ayob  Z. Salam 《Ocean Engineering》2011,38(1):271-284

Fuzzy logic controller (FLC) performance is greatly dependent on its inference rules. In most cases, the more rules being applied to an FLC, the accuracy of the control action is enhanced. Nevertheless, a large set of rules requires more computation time. As a result, an FLC implementation requires fast and high performance processors. This paper describes a simplified control scheme to design a fuzzy logic controller (FLC) for an underwater vehicle namely, deep submergence rescue vehicle (DSRV). The proposed method, known as the single input fuzzy logic controller (SIFLC), reduces the conventional two-input FLC (CFLC) to a single input FLC. The SIFLC offers significant reduction in rule inferences and simplifies the tuning process of control parameters. The performance of the proposed controller is validated via simulation by using the marine systems simulator (MSS) on the Matlab/Simulink^® platform. During simulation, the DSRV is subjected to ocean wave disturbances. The results indicate that the SIFLC, Mamdani and Sugeno type CFLC give identical response to the same input sets. However, an SIFLC requires very minimum tuning effort and its execution time is in the orders of two magnitudes less than CFLC.  相似文献   

Accuracy assessment of moderate resolution image spectroradiometer products for dust storms in semiarid environment     

J. Amanollahi  S. Kaboodvandpour Ph.D.  A. M. Abdullah  M. F. Ramli 《International Journal of Environmental Science and Technology》2011,8(2):373-380

Dust storms are strongly and negatively associated with the annual cycle of rainfall and coincide with the west and southwesterly winds in west and south west of Iran. Accuracy assessment of particulate matter products of moderate resolution image spectroradiometer was studied in this research. Moderate resolution image spectroradiometer products consist of aerosol optical thickness, its corresponding image red, green and blue and moderate resolution image spectroradiometer/ terra calibrated radiances 5 minutes L1B swath 1 km, which shows the environmental information at terrestrial, atmospheric and ocean phenomenology. Daily aerosol optical thickness data retrieved from moderate resolution image spectroradiometer from May 2009 to May 2010 were compared with the amount of particulate matter measured at ground in Sanandaj, Iran, using non-linear correlation coefficient. Results showed that the moderate resolution image spectroradiometer image / terra calibrated radiances 5 minutes L1B swath 1 km is able to detect dust storms distribution and their blowing direction over study area clearly. The air quality conditions obtained in with dust storm period were unhealthy and correlation coefficients between moderate resolution image spectroradiometer aerosol optical thickness and particulate matter concentration in this period were higher than without dust storm period. The moderate resolution image spectroradiometer aerosol optical thickness values lower than 0.1 were acquired uncertainty level. Comparison of moderate resolution image spectroradiometer images/ terra calibrated radiances 5 minutes L1B swath 1 km and image red, green and blue showed that moderate resolution image spectroradiometer has limitation in retrieval of aerosol optical thickness from the dust storm with high concentration of particulate matter. This study reveals that the algorithm which is applied to refine the aerosol optical thickness is not able to recognize the amount of particulate matter in low and very high concentrations sensitively. No study has previously been conducted to investigate the accuracy of the moderate resolution image spectroradiometer particulate matter products.  相似文献   

Modeling of gas generation from the Alam El-Bueib formation in the Shoushan Basin, northern Western Desert of Egypt     

Mohamed Ragab Shalaby  Mohammed Hail Hakimi  Wan Hasiah Abdullah 《International Journal of Earth Sciences》2013,102(1):319-332

The Shoushan Basin is an important hydrocarbon province in the northern Western Desert, Egypt, but the burial/thermal histories for most of the source rocks in the basin have not been assigned yet. In this study, subsurface samples from selected wells were collected to characterize the source rocks of Alam El-Bueib Formation and to study thermal history in the Shoushan Basin. The Lower Cretaceous Alam El-Bueib Formation is widespread in the Shoushan Basin, which is composed mainly of shales and sandstones with minor carbonate rocks deposited in a marine environment. The gas generative potential of the Lower Cretaceous Alam El-Bueib Formation in the Shoushan Basin was evaluated by Rock–Eval pyrolysis. Most samples contain sufficient type III organic matter to be considered gas prone. Vitrinite reflectance was measured at eight stratigraphic levels (Jurassic–Cretaceous). Vitrinite reflectance profiles show a general increase of vitrinite reflectance with depth. Vitrinite reflectance values of Alam El-Bueib Formation range between 0.70 and 0.87 VRr %, indicating a thermal maturity level sufficient for hydrocarbon generation. Thermal maturity and burial histories models predict that the Alam El-Bueib source rock entered the mid-mature stage for hydrocarbon generation in the Tertiary. These models indicate that the onset of gas generation from the Alam El-Bueib source rock began in the Paleocene (60 Ma), and the maximum volume of gas generation occurred during the Pliocene (3–2 Ma).  相似文献