排序方式： 共有39条查询结果，搜索用时 93 毫秒
11.
Marek Grad Rolf Mjelde Wojciech Czuba Aleksander Guterch the IPY Project Group 《Geophysical Prospecting》2012,60(5):855-869
Wide‐angle seismic data acquired by use of air‐guns and ocean bottom seismometers (OBS) contain strong direct water arrivals and multiples, generally considered as noise and thus not included in the modelling. However, a recent study showed that standard ray‐tracing modelling of the water multiples recorded off the Bear Island, North Atlantic, provided a reliable estimate of the velocity distribution in the water layer. Here, we demonstrate that including the amplitudes in the modelling provide valuable information about the VP contrast at the seafloor, as well as the VP/VS ratio and attenuation (QP) of the uppermost sediments. The VP contrast at the seafloor is estimated at about 250 m/s, within a precision of approximately ±30 m/s. The VP/VS ratio in the uppermost sedimentary layer is modelled in the range 2.25–2.50 and the QP factor is estimated at 1000 for the water, 30–50 for the uppermost layer and 40–50 for the second sedimentary layer. The values obtained for the sediments suggest a lithology dominated by silty clays, with porosity below average. 相似文献
12.
The non-thermal escape of neutral O atoms from Mars at the current epoch is largely due to dissociative recombination of :
13.
Crustal structure below the Polish Basin: Is it composed of proximal terranes derived from Baltica? 总被引：2，自引：2，他引：2
The large-scale seismic refraction and wide-angle reflection experiment POLONAISE'97 together with LT-7 and TTZ profiles carried out with the most modern techniques gave a high resolution of crustal structure of the Trans-European Suture Zone (TESZ) in NW and central Poland. The results of seismic investigations show the presence of relatively low velocity rocks (Vp < 6.1 km/s) down to a depth of 20 km beneath the Polish Basin (PB), and a high velocity lower crust (Vp = 6.8–7.3 km/s). The crustal thickness in the TESZ is intermediate between that of the East European Craton (EEC) to the northeast (40–45 km) and that of the Variscan crust (VB) to the southwest ( 30 km). Velocities in the uppermost mantle are relatively high (Vp = 8.25–8.45 km/s). The crust is three-layered with substantial differences in the velocities and thickness of individual layers. The area of the TESZ in NW and central Poland can be divided into at least two crustal blocks (terranes), called here Pomeranian Unit (PU, in the northwest) and Kuiavian Unit (KU, in the southeast). The postulated boundary between KU and PU is rather sharp at particular levels of the crust. Velocity distribution in the middle and lower crystalline crust in the TESZ area resemble values recognized in the EEC area, the fundamental difference being the much smaller thickness of both these layers. Our hypothesis/speculation is that the attenuated lower and middle crust of the TESZ belong to proximal terranes built of the EEC crust detached in the southeast and re-accreted to the EEC due to the process of anti-clockwise rotation of the Baltica paleocontinent during the Ordovician–Early Silurian. 相似文献
14.
Tomasz Janik Marek Grad Aleksander Guterch Ryszard Dadlez Jukka Yliniemi Timo Tiira G. Randy Keller Edward Gaczy&#x;ski CELEBRATION Working Group 《Tectonophysics》2005,411(1-4):129-156
The large-scale CELEBRATION 2000 seismic experiment investigated the velocity structure of the crust and upper mantle between western portion of the East European Craton (EEC) and the eastern Alps. This area comprises: the Trans-European Suture Zone, the Carpathian Mountains, the Pannonian Basin and the Bohemian Massif. This experiment included 147 chemical shots recorded by 1230 seismic stations during two deployments. Good quality data along 16 main and a few additional profiles were recorded. One of them, profile CEL03, was located in southeastern Poland and was laid out as a prolongation of the TTZ profile performed in 1993. This paper focuses on the joint interpretation of seismic data along the NW–SE trending TTZ–CEL03 transect, located in the central portion of the Trans-European Suture Zone. First arrivals and later phases of waves reflected/refracted in the crust and upper mantle were interpreted using two-dimensional tomographic inversion and ray-tracing techniques. This modelling established a 2-D (quasi 3-D) P-wave velocity lithospheric model. Four crustal units were identified along the transect. From northwest to southeast, thickness of the crust varies from 35 km in the Pomeranian Unit (NW) to 40 km in the Kuiavian Unit, to 50 km in the Radom–Łysogóry Unit and again to 43 km in the Narol Unit (SE). The first two units are thought to be proximal terranes detached from the EEC farther to the southeast and re-accreted to the edge of the EEC during the Early Palaeozoic. The origin of the remaining two units is a matter of dispute: they are either portions of the EEC or other proximal terranes. In the area of the Polish Basin (first two units), the P-wave velocity is very low (Vp < 6.1 km/s) down to depths of 15–20 km indicating that a very thick sedimentary and possibly volcanic rock sequence, whose lower portion may be metamorphosed, is present. The velocity beneath the Moho was found to be rather high, being 8.25 km/s in the northwestern portion of the transect, 8.4 km/s in the central sector, and 8.1 km/s in the southeastern sector. 相似文献
15.
2-D seismic tomographic and ray tracing modelling of the crustal structure across the Sudetes Mountains basing on SUDETES 2003 experiment data 总被引：2，自引：3，他引：2
Mariusz Majda&#x;ski Marek Grad Aleksander Guterch SUDETES Working Group 《Tectonophysics》2006,413(3-4):249-269
The seismic data obtained during SUDETES 2003 experiment are analysed, and detailed crustal structure for profiles S02, S03 and S06 is presented using three different 2-D techniques: (1) “smooth” tomography of refracted waves travel times, (2) ray tracing of reflected and refracted waves, and (3) joint velocity and depth of reflector tomographic inversion. In spite of different interpretation techniques used, the models of the crustal structure show common characteristic features. The low velocity (Vp < 4 km/s) sedimentary layer was documented in the northeastern part of the study area. The topmost basement has in general a velocity of 5.8–6.0 km/s, and velocities at ca. 20 km depth are 6.15–6.25 km/s. The strong reflecting boundaries were found at 20–23 and 25–28 km depth with a velocity contrast about 0.4 km/s, and the highest velocities in the lowermost crust are 6.8–7.2 km/s. In general, the crust of the Bohemian Massif is slightly thicker (33–35 km) than in the northern part of the area. Velocities beneath Moho are relatively low, of 7.95 km/s. On the basis of well recorded reflected waves, mantle reflectors were discovered in the depth interval ca. 40–70 km. Apart of new results for the geology and tectonics of the area, some conclusion could be made about different techniques used. In the 2-D case the “clasical” ray tracing method with using all correlated phases gives the most adequate model of the structure, because of full, manual control of the model creation. The “smooth” first arrival travel times tomography, although very fast, is not satisfactory enough to describe the complex structure. So, the best candidate in 3-D case seems to be travel time tomography for both refracted and reflected waves in multi-layers models. 相似文献
16.
Agashev Aleksey M. Nakai Shun&#;ichi Serov Ilya V. Tolstov Aleksander V. Garanin Konstantin V. Kovalchuk Oleg E. 《Mineralogy and Petrology》2018,112(2):597-608
Here we present new data from a systematic Sr, Nd, O, C isotope and geochemical study of kimberlites of Devonian age Mirny field that are located in the southernmost part of the Siberian diamondiferous province. Major and trace element compositions of the Mirny field kimberlites show a significant compositional variability both between pipes and within one diatreme. They are enriched in incompatible trace elements with La/Yb ratios in the range of (65–300). Initial Nd isotope ratios calculated back to the time of the Mirny field kimberlite emplacement (t = 360 ma) are depleted relative to the chondritic uniform reservoir (CHUR) model being 4 up to 6 ɛNd(t) units, suggesting an asthenospheric source for incompatible elements in kimberlites. Initial Sr isotope ratios are significantly variable, being in the range 0.70387–0.70845, indicating a complex source history and a strong influence of post-magmatic alteration. Four samples have almost identical initial Nd and Sr isotope compositions that are similar to the prevalent mantle (PREMA) reservoir. We propose that the source of the proto-kimberlite melt of the Mirny field kimberlites is the same as that for the majority of ocean island basalts (OIB). The source of the Mirny field kimberlites must possess three main features: It should be enriched with incompatible elements, be depleted in the major elements (Si, Al, Fe and Ti) and heavy rare earth elements (REE) and it should retain the asthenospheric Nd isotope composition. A two-stage model of kimberlite melt formation can fulfil those requirements. The intrusion of small bodies of this proto-kimberlite melt into lithospheric mantle forms a veined heterogeneously enriched source through fractional crystallization and metasomatism of adjacent peridotites. Re-melting of this source shortly after it was metasomatically enriched produced the kimberlite melt. The chemistry, mineralogy and diamond grade of each particular kimberlite are strongly dependent on the character of the heterogeneous source part from which they melted and ascended.
相似文献17.
Jacquez Geoffrey M. Essex Aleksander Curtis Andrew Kohler Betsy Sherman Recinda El Emam Khaled Shi Chen Kaufmann Andy Beale Linda Cusick Thomas Goldberg Daniel Goovaerts Pierre 《Journal of Geographical Systems》2017,19(3):197-220
Journal of Geographical Systems - As the volume, accuracy and precision of digital geographic information have increased, concerns regarding individual privacy and confidentiality have come to the... 相似文献
18.
The lidar ratios at 500 and 1020 nm were derived from POM 01L sun-sky scanning photometer measurements taken at Belsk Geophysical
Observatory (long. 20°47′, lat. 51°50′) in the period from 2002 to 2006. The most frequently occurring lidar ratio values
for the study period are 50 sr and 30 sr at 500 nm and 1020 nm, respectively. Calculations of lidar ratios for summer and
winter seasons have been made as well. Back trajectory analysis was also performed to final aerosol source of origin. 相似文献
19.
Ian Buvit Michael R. Waters Mikhail V. Konstantinov Aleksander V. Konstantinov 《Geoarchaeology》2003,18(6):649-673
In 1998, geoarchaeological research was carried out at the Upper Paleolithic site of Studenoe in the Transbaikal Region of Russia. The site is divided into three loci situated on two terraces overlooking the Chikoi River. Alluvial sediments beneath the oldest terrace (T2) consist of two depositional units. Radiocarbon ages indicate that aggradation of the T2 fill began before 18,000 yr B.P. Alluvial sediments beneath the lower terrace (T1) range in age from 13,000 to 10,000 yr B.P. and are divided into three depositional units. Both terraces are overlain by Holocene colluvium. Archaeological materials at Studenoe 1/1, 1/2, and 2 include dwellings, hearths, and thousands of bone and stone artifacts assigned to the late Upper Paleolithic through the Bronze Age. Evidence of microblade technology is present in all components of the site. Material from recent excavations of Paleolithic levels in the T2 fill at Studenoe includes mobiliary art, bone needles, and a large dwelling with four hearth features. © 2003 Wiley Periodicals, Inc. 相似文献
20.
We address the problem of increasing the signal-to-noise ratio during surface microseismic monitoring data processing. Interference from different seismic waves causes misleading results of microseismic event locations. Ground-roll suppression is particularly necessary. The standard noise suppression techniques assume regular and dense acquisition geometries. Many pre-processing noise suppression algorithms are designed for special types of noise or interference. To overcome these problems, we propose a novel general-purpose filtration method. The goal of this method is to amplify only the seismic waves that are excited in the selected target area and suppress all other signals. We construct a linear projector onto a frequency domain data subspace, which corresponds to the seismic emission of the target area. The novel filtration method can be considered an extension of the standard frequency–wavenumber flat wave filtration method for non-flat waves and arbitrary irregular receiver-position geometries. To reduce the effect of the uncertainty of the velocity model, we suggest using additional active shot data (typically the perforation shots), which provide static travel time corrections for the target area. The promising prospects of the proposed method are confirmed by synthetic and semi-synthetic data processing. 相似文献