Evaluating igneous sources of the Taveyannaz formation in the Central Alps by detrital zircon U–Pb age dating and geochemistry     

Gang Lu  Wilfried Winkler  Meinert Rahn  Albrecht von Quadt  Sean D. Willett 《Swiss Journal of Geoscience》2018,111(3):399-416

Late Palaeogene syn-tectonic volcanic products have been found in the Northern Alpine foreland basin and in the South Alpine hemipelagic basin. The source of abundant volcanic fragments is still in debate. We analyzed the geochronology and geochemistry of detrital zircons, and evaluated their temporal and genetic relationships with potential volcanic sources. The study shows that the detrital zircon U–Pb age patterns have two major age groups: a dominance (ca. 90%) of pre-Alpine zircons was found, as commonly observed in other Alpine flysch formations. These zircons apparently derived from erosion of the early Alpine nappe stack in South Alpine and Austroalpine units. Furthermore, a few Neo-Alpine zircons (ca. 10%) have ages ranging from Late Eocene to Early Oligocene (~ 41–29 Ma). Both source materials were mixed during long riverine transport to the basin margins before being re-deposited by gravity flows. These Palaeogene ages match with the activity of Peri-Adriatic magmatism, including the Biella volcanic suite as well as the Northern Adamello and Bergell intrusions. The values of REE and ¹⁷⁶Hf/¹⁷⁷Hf_(t) ratios of the Alpine detrital zircons are in line with the magmatic signatures. We observe an in time and space variable supply of syn-sedimentary zircons. From late Middle Eocene to Late Eocene, basin influx into the South Alpine and Glarus (A) basins from the Northern Adamello source is documented. At about 34 Ma, a complete reorganisation is recorded by (1) input of Bergell sources into the later Glarus (B) basin, and (2) the coeval volcaniclastic supply of the Haute-Savoie basin from the Biella magmatic system. The Adamello source vanished in the foreland basin. The marked modification of the basin sources at ~ 34 Ma is interpreted to be initiated by a northwestern shift of the early Alpine drainage divide into the position of the modern Insubric Line.  相似文献   

Diversity of marine and brackish water nitrite-oxidizing consortia developed for activating nitrifying bioreactors in aquaculture     

P. G. Preena  V. J. R. Kumar  C. Achuthan  R. George  R. Boobal  R. R. Nair  I. S. B. Singh 《International Journal of Environmental Science and Technology》2018,15(11):2399-2410

Nitrite is a well-known toxicant in aquaculture, produced as intermediate in nitrification. Two nitrite-oxidizing bacterial consortia, one from marine environment and the other from brackish water, were developed by enrichment technique at National Centre for Aquatic Animal Health, for removal of nitrite from recirculating aquaculture systems. In the present study, bacterial diversity of the consortia was assessed based on 16S ribosomal RNA and the functional gene analysis. Clone libraries of 16S ribosomal RNA gene and nitrite oxidoreductase A gene were constructed, and amplified ribosomal DNA restriction analysis was carried out to cluster the clones. Dendrograms generated through molecular characterization showed 29 and 27 clusters in marine and brackish water consortia, respectively. Phylogenetic analyses of representative clones from each cluster depicted profound diversity in the consortia consisting autotrophic nitrifiers belonging to Proteobacteria, anaerobic ammonia oxidizers, Actinobacteria, Bacteroidetes and heterotrophic denitrifiers. Functional gene analysis corroborated with the presence of specific nitrite oxidizers. Quantitative polymerase chain reaction showed the abundance of nitrite oxidizers in the order of 1.51 ± 0.38 × 10⁹/g and 4.88 ± 0.42 × 10⁷/g in marine and brackish water consortia, respectively. Diversity indices and pattern of distribution of organisms within the consortia were analyzed using Geneious, VITCOMIC, Mega 5 and Primer software. The marine nitrite-oxidizing consortium showed higher Shannon–Wiener diversity and mean population diversity than brackish water consortium, suggesting that the former was having more diverse flora and higher potential to be used as startup cultures for activating nitrifying bioreactors subsequent to acclimatization to the required salinity.  相似文献   

Comparative study for environmental performances of traditional manufacturing and directed energy deposition processes     

Zhichao Liu  Qiuhong Jiang  Weilong Cong  Tao Li  Hong-Chao Zhang 《International Journal of Environmental Science and Technology》2018,15(11):2273-2282

Additive manufacturing is considered more sustainable than traditional manufacturing due to its efficient energy and materials usage. However, previous literature indicates that this suggestion is applicable only for the polymer materials, and the environmental issues of additive manufacturing with metallic materials are still not clear. With the method of life cycle assessment, this paper analyzes and compares the energy consumptions and environmental impacts of direct energy deposition and traditional machining processes for a typical metal part. Further, the article attempts to identify the significant issues in the two manufacturing options that contribute most to the environmental impacts. Six environmental impacts were assessed in this study: global warming potential (GWP); acidification potential (AP); eutrophication potential; ozone depletion potential (ODP); photochemical ozone creation potential (POCP); and abiotic depletion potential (ADP). The results show that the gear laser fabrication process consumes more energy and releases more negative emissions compared with traditional gear manufacturing processes. The results of GWP, AP, ODP, ADP and POCP of the traditional gear manufacturing are only 30.33, 43.42, 17, 65.05 and 54.68% of the gear laser fabrication.  相似文献   

Effectiveness of Mg–Al-layered double hydroxide for heavy metal removal from mine wastewater and sludge volume reduction     

M. Tamzid Rahman  T. Kameda  S. Kumagai  T. Yoshioka 《International Journal of Environmental Science and Technology》2018,15(2):263-272

Health hazards from heavy metal pollution in water systems are a global environmental problem. Of similar concern is sludge that results from wastewater treatment due to unsatisfactory sludge management technology. Therefore, the effectiveness of using Mg–Al-layered double hydroxide in the removal of heavy metals from mine wastewater was tested and compared with that of calcium hydroxide [Ca(OH)₂], which is a common treatment method for heavy metal removal. Initially, the mine wastewater contained cations of the heavy metals iron (Fe), zinc (Zn), copper (Cu), and lead (Pb). The Mg–Al-layered double hydroxides were able to remove 371, 7.2, 121, and 0.4 mg/L of these pollutants, respectively, using the co-precipitation method. The removal of these metals is most effective using 0.5 g Mg–Al-layered double hydroxide (Mg/Al molar ratio 4) and 20 min of shaking. Zn was removed by the formation of Zn(NO₃)(OH)·H₂O and Zn₅(NO₃)₂(OH)₈ when LDH, Mg/Al molar ratios of 4 and 2, respectively, were used. Similarly, Fe, Cu, and Pb were removed by the formation of Fe–Al-layered double hydroxide, Cu₂(OH)₃·NO₃ and Pb₄(OH)₄(NO₃)₄, respectively. While Ca(OH)₂ is also capable of reducing the heavy metal concentrations below the Japanese recommended values, this analysis shows that using 0.5 g Mg–Al-layered double hydroxide is a better treatment condition for mine wastewater, because it generates lower sludge volumes than 0.1 g of Ca(OH)₂. The measured sludge volume was 1.5 mL for Mg–Al-layered double hydroxide and 2.5 mL for Ca(OH)₂, a nearly twofold further reduction.  相似文献   

Interactive effect of cadmium and zinc on chromium uptake in spinach grown in Vertisol of Central India     

M. L. Dotaniya  S. Rajendiran  M. Vassanda Coumar  V. D. Meena  J. K. Saha  S. Kundu  A. Kumar  A. K. Patra 《International Journal of Environmental Science and Technology》2018,15(2):441-448

A pot culture experiment was conducted to study impact and interaction of multi-metals on growth, yield and metals uptake by spinach (variety All Green). Three levels of each chromium (0, 50 and 100 mg/kg), cadmium (0, 1 and 2 mg/kg) and zinc (0, 10 and 20 mg/kg) in combinations (total treatments 3 × 3 × 3 = 27) were applied in a Vertisol (5 kg). The results showed that increasing the concentration of chromium, cadmium and zinc in soil enhanced the respective metal concentrations in spinach root and shoot. When cadmium at 2 mg/kg along with chromium at 100 mg/kg soil was applied, chromium concentration and uptake were decreased in root and shoot. Meanwhile, zinc application had no significant effect on chromium uptake and concentration in spinach biomass. From the results, it was concluded that cadmium at higher dose had an antagonistic effect over chromium. On the other hand, in chromium, cadmium and zinc combinations particularly at their higher levels, a competition among each other was found. Therefore, the findings could be used as guidelines for controlling and management of heavy metals pollution in farmland.  相似文献   

Heavy metal exposure from co-processing of hazardous wastes for cement production and associated human risk assessment     

Norazlina Ab Halim  Faradiella Mohd. Kusin  Khairul Nizam Mohamed 《International Journal of Environmental Science and Technology》2018,15(4):733-742

This study was carried out to determine the concentration of heavy metals (Cd, Ni, Pb, Cr, Ni and Zn) in ordinary Portland cement (OPC) produced from the co-processing with hazardous waste in comparison with OPC produced using natural raw materials. The results showed that the concentration of heavy metals in cement produced from natural raw material was in the order of Zn > Pb > Cr > Ni > Cu > Cd. Zn and Cd were the highest and the lowest concentrations, respectively, in cements produced from the co-processing activity. The difference between heavy metals concentrations in OPC produced with and without co-processing was found to be statistically significant. The concentration of heavy metals in the cement produced is generally factory dependent. The human risk assessment associated with the heavy metals for non-carcinogenic and carcinogenic risks has been evaluated. The calculated hazard index (HI) and total lifetime cancer risks (LCR) were lower than the acceptable threshold reference values, HI < 1 and LCR < 1 × 10^?4, respectively. Thus, it is anticipated that there is no potential of non-carcinogenic and carcinogenic risks for both adult and children. However, the findings indicated that there is a need for regulatory monitoring. The exposure pathway for both non-carcinogenic and carcinogenic risks are both in the order of ingestion > dermal > inhalation.  相似文献   

Short-term greenhouse emission lowering effect of biochars from solid organic municipal wastes     

Djaafar Rehrah  Rishipal R. Bansode  Osman Hassan  Mohamed Ahmedna 《International Journal of Environmental Science and Technology》2018,15(5):1093-1102

Qatar economy has been growing rapidly during the last two decades during which waste generation and greenhouse gas emissions increased exponentially making them among the main environmental challenges facing the country. Production of biochar from municipal solid organic wastes (SOWs) for soil application may offer a sustainable waste management strategy while improving crop productivity and sequestering carbon. This study was conducted to (1) investigate the physicochemical parameters of biochars for SOW, (2) select the best-performing biochars for soil fertility, and (3) evaluate the potential benefits of these biochars in lowering greenhouse gases (GHGs) during soil incubation. Biochars were produced from SOW at pyrolysis temperatures of 300–750 °C and residence times of 2–6 h. Biochars were characterized before use in soil incubation to select the best-performing treatment and evaluation of potential GHG-lowering effect using CO₂ emission as proxy. Here, soil–biochar mixtures (0–2%w/w) were incubated in greenhouse settings for 120 days at 10% soil moisture. Soil properties, such as pH, EC, TC, and WHC, were significantly improved after soil amendment with biochar. Two biochars produced from mixed materials at 300–500 °C for 2 h and used at 0.5–1% application rate performed the best in enhancing soil fertility parameters. A significant decrease in CO₂ emission was observed in vials with soil–biochar mixtures, especially for biochars produced at 500 °C compared the corresponding raw materials which exhibited an exponential increase in the CO₂ emission. Hence, application of biochar to agricultural soils could be beneficial for simultaneously improving soil fertility/crop productivity while sequestering carbon, thereby reducing anthropogenic emissions of GHGs.  相似文献   

Isolation of <Emphasis Type="Italic">Bacillus cereus</Emphasis> from botanical soil and subsequent biodegradation of waste engine oil     

S. Bhurgri  F. N. Talpur  S. M. Nizamani  H. I. Afridi  M. A. Surhio  Muhammad Raza Shah  C. W. Bong 《International Journal of Environmental Science and Technology》2018,15(7):1453-1466

Waste engine oil causes a vital environmental pollution when it spill during change and transportation and products of waste engine oil causes lethal effects to the living systems. Thus, abiotic and biotic approaches are being extensively used for removal of waste engine oil pollution. Therefore in present study, waste engine oil degradation was accomplished by a new bacterial culture, isolated from the soil by an enrichment technique. Morphological, biochemical and gene sequence analysis revealed that isolate was Bacillus cereus. Subsequently, biodegradation potential of B. cereus for waste engine oil was studied. Experimental variables, such as pH, substrate concentration, inoculum size, temperature and time on the biodegradation, were checked in mineral salt medium. The biodegradation efficiency of B. cereus was determined by gravimetry, UV–visible spectrophotometry and gas chromatography. In addition, waste engine oil was also characterized by GC–MS and FTIR for its major constituents, which showed total 38 components in waste engine oil, including hopanes, benzopyrene, long-chain aliphatic hydrocarbons, dibenzothiophenes, biphenyl and their derivatives. Results of successive biodegradation indicated that B. cereus was capable to degrade 1% of waste engine oil with 98.6% degradation potential at pH 7 within 20 days. Hence, B. cereus presents an innovative tool for removing the engine oil from the contaminated area.  相似文献   

Rainfall flood hazard at nuclear power plants in India     

Pramod Kumar Sharma 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2018,12(3):218-233

Flood hazard evaluation is an important input for Nuclear Power Plants external events safety studies. In the present study, flood hazard at various nuclear sites in India due to rainfall has been evaluated. Hazard estimation is a statistical procedure by which rainfall intensity versus occurrence frequency is estimated from historical records of rainfall data and extrapolated with asymptotic extreme value distribution. Rainfall data needed for flood hazard assessment are daily annual maximum rainfall (24?h data). The observed data points have been fitted using Gumbel, power law and exponential distribution, and return period has been estimated. To study the stationarity of rainfall data, a moving window estimate of the parameters has been performed. The rainfall pattern is stationary in both coastal and inland regions over the period of observation. The coastal regions show intense rainfall and higher variability than inland regions. Based on the plant layout, catchment area and drainage capacity, the prototype fast breeder reactor (PFBR) site is unlikely to be flooded.  相似文献   

Hydrogeochemical Features of Thermal Waters of South Trungbo (Central Vietnam)     

D. A. Novikov  Doan Van Tuyen  Thi Kim Van Phan  N. A. Kharitonova 《Russian Journal of Pacific Geology》2018,12(1):63-79

The results of studying the features of the hydrogeological structure and chemical and isotope composition of thermal waters from the central part of Vietnam that are characterized by intense manifestations of intrusive magmatism are presented. It is established that low–and high–thermal waters with temperature varying within 30–85°C are developed in the area under study. The value of total mineralization of the hydrotherms ranges from 0.05 to 10.05 g/dm³. It is assumed that the circulation of thermal waters that are different in temperature and chemical composition occurs at two levels. The regular change of the hydrotherm composition in the direction from mineralized chloride sodium, including with increased Ca content, to fresh sodium bicarbonate is revealed. The ratio of δ¹⁸O–δ²H isotopes indicates that the water component is based on meteoric water. In the coastal areas, there is an isotope shift towards the ocean waters, which is also confirmed by the hydrogeochemical data. The key factors for forming the chemical composition of the thermal waters in South Trungbo are their genetic type, the interaction processes in the “water–rock–gas–organic substance” system, and their equilibrium–nonequilibrium state.  相似文献