High spatial resolution hyperspectral mapping of in-stream habitats, depths, and woody debris in mountain streams     

W. Andrew Marcus  Carl J. Legleiter  Richard J. Aspinall  Joseph W. Boardman  Robert L. Crabtree 《Geomorphology》2003,55(1-4):363

This article evaluates the potential of 1-m resolution, 128-band hyperspectral imagery for mapping in-stream habitats, depths, and woody debris in third- to fifth-order streams in the northern Yellowstone region. Maximum likelihood supervised classification using principal component images provided overall classification accuracies for in-stream habitats (glides, riffles, pools, and eddy drop zones) ranging from 69% for third-order streams to 86% for fifth-order streams. This scale dependency of classification accuracy was probably driven by the greater proportion of transitional boundary areas in the smaller streams. Multiple regressions of measured depths (y) versus principal component scores (x₁, x₂,…, x_n) generated R² values ranging from 67% for high-gradient riffles to 99% for glides in a fifth-order reach. R² values were lower in third-order reaches, ranging from 28% for runs and glides to 94% for pools. The less accurate depth estimates obtained for smaller streams probably resulted from the relative increase in the number of mixed pixels, where a wide range of depths and surface turbulence occurred within a single pixel. Matched filter (MF) mapping of woody debris generated overall accuracies of 83% in the fifth-order Lamar River. Accuracy figures for the in-stream habitat and wood mapping may have been misleadingly low because the fine-resolution imagery captured fine-scale variations not mapped by field teams, which in turn generated false “misclassifications” when the image and field maps were compared.The use of high spatial resolution hyperspectral (HSRH) imagery for stream mapping is limited by the need for clear water to measure depth, by any tree cover obscuring the stream, and by the limited availability of airborne hyperspectral sensors. Nonetheless, the high accuracies achieved in northern Yellowstone streams indicate that HSRH imagery can be a powerful tool for watershed-wide mapping, monitoring, and modeling of streams.  相似文献   

碧口群火山岩的时代——SHRIMP锆石U—Pb测年结果   总被引：12，自引：0，他引：12  

闫全人  王宗起闫臻 AndrewD.Hanson PeterA.Druschke刘敦一  宋彪简平 王涛 《地质通报》2003,22(6):456-458

碧口群火山岩系是从原碧口系(叶连俊等,1944,后称碧口群)中解体出来的一个岩石单元(陶洪祥等,1993)。虽经过近60年的研究,但对某些关键问题,特别是碧口群火山岩系的时代,仍存在不同认识。在早期研究阶段(20世纪40～50年代)和60～70年代的区域地质调查工作中,碧口群和横丹群被视做一个整体,并通过地层层序关系探讨其时代。如,叶连俊等(1944)提出碧口系形成于志留—泥盆纪,黄振辉(1959)则认为碧口群属寒武—志留系。80年代以来对碧口群火山岩系进行的同位素年代学和地古生物学研究给出了从新元古代(赵祥生等,1990;胡正东,1990;李耀敏,1991;秦…  相似文献   

Modelling of oxygen and nitrogen cycling as a function of macrophyte community in the Thau lagoon     

M. Plus  A. Chapelle  P. Lazure  I. Auby  G. Levavasseur  M. Verlaque  T. Belsher  J. -M. Deslous-Paoli  J. -M. Zaldívar  C. N. Murray 《Continental Shelf Research》2003,23(17-19):1877

A three-dimensional model coupling physical and biological processes for the whole Thau lagoon (Mediterranean coast of France) was developed in order to assess the relationships between macrophytes and the oxygen and nitrogen cycles. Ten species have been inserted as forcing variables in the model. Plankton dynamics, shellfish cultivation impact and mineralization of organic matter are also considered, as well as nutrient and oxygen exchanges between the sediment and the water column.Simulations with and without the macrophytes have shown that the system can be characterized as having a highly structured pattern involving lagoon nitrogen and oxygen cycles. This pattern is created by the combined influence of macrophytes, watershed and oyster farming.The model has been also used to assess the total annual macrophyte production at the whole lagoon scale. Comparisons with phytoplankton production and with results from other temperate lagoons have underlined the high productivity of the Thau lagoon supported by active nutrient regeneration.  相似文献   

Hydrologic and geomorphic effects of temporary ice‐dammed lake formation during jökulhlaups     

Matthew J. Roberts  Fiona S. Tweed  Andrew J. Russell   skar Knudsen  Timothy D. Harris 《地球表面变化过程与地形》2003,28(7):723-737

  相似文献   

System identification of the Vincent Thomas suspension bridge using earthquake records     

Andrew W. Smyth  Jin‐Song Pei  Sami F. Masri 《地震工程与结构动力学》2003,32(3):339-367

The Vincent Thomas Bridge in the Los Angeles metropolitan area, is a critical artery for commercial traffic flow in and out of the Los Angeles Harbor, and is at risk in the seismically active Southern California region, particularly because it straddles the Palos Verdes fault zone. A combination of linear and non‐linear system identification techniques is employed to obtain a complete reduced‐order, multi‐input–multi‐output (MIMO) dynamic model of the Vincent Thomas Bridge based on the dynamic response of the structure to the 1987 Whittier and 1994 Northridge earthquakes. Starting with the available acceleration measurements (which consists of 15 accelerometers on the bridge structure and 10 accelerometers at various locations on its base), an efficient least‐squares‐based time‐domain identification procedure is applied to the data set to develop a reduced‐order, equivalent linear, multi‐degree‐of‐freedom model. Although not the main focus of this study, the linear system identification method is also combined with a non‐parametric identification technique, to generate a reduced‐order non‐linear mathematical model suitable for use in subsequent studies to predict, with good fidelity, the total response of the bridge under arbitrary dynamic environments. Results of this study yield measurements of the equivalent linear modal properties (frequencies, mode shapes and non‐proportional damping) as well as quantitative measures of the extent and nature of non‐linear interaction forces arising from strong ground shaking. It is shown that, for the particular subset of observations used in the identification procedure, the apparent non‐linearities in the system restoring forces are quite significant, and they contribute substantially to the improved fidelity of the model. Also shown is the potential of the identification technique under discussion to detect slight changes in the structure's influence coefficients, which may be indicators of damage and degradation in the structure being monitored. Difficulties associated with accurately estimating damping for lightly damped long‐span structures from their earthquake response are discussed. The technical issues raised in this paper indicate the need for added spatial resolution in sensor instrumentation to obtain identified mathematical models of structural systems with the broadest range of validity. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Facies of slurry-flow deposits, Britannia Formation (Lower Cretaceous), North Sea: implications for flow evolution and deposit geometry   总被引：4，自引：0，他引：4  

Donald R. Lowe  Martin Guy†  Andrew Palfrey† 《Sedimentology》2003,50(1):45-80

ABSTRACT Mud‐rich sandstone beds in the Lower Cretaceous Britannia Formation, UK North Sea, were deposited by sediment flows transitional between debris flows and turbidity currents, termed slurry flows. Much of the mud in these flows was transported as sand‐ and silt‐sized grains that were approximately hydraulically equivalent to suspended quartz and feldspar. In the eastern Britannia Field, individual slurry beds are continuous over long distances, and abundant core makes it possible to document facies changes across the field. Most beds display regular areal grain‐size changes. In this study, fining trends, especially in the size of the largest grains, are used to estimate palaeoflow and palaeoslope directions. In the middle part of the Britannia Formation, stratigraphic zones 40 and 45, slurry flows moved from south‐west and south towards the north‐east and north. Most zone 45 beds lens out before reaching the northern edge of the field, apparently by wedging out against the northern basin slope. Zone 40 and 45 beds show downflow facies transitions from low‐mud‐content, dish‐structured and wispy‐laminated sandstone to high‐mud‐content banded units. In zone 50, at the top of the formation, flows moved from north to south or north‐west to south‐east, and their deposits show transitions from proximal mud‐rich banded and mixed slurried beds to more distal lower‐mud‐content banded and wispy‐laminated units. The contrasting facies trends in zones 40 and 45 and zone 50 may reflect differing grain‐size relationships between quartz and feldspar grains and mud particles in the depositing flows. In zones 40 and 45, quartz grains average 0·30–0·32 mm in diameter, ≈ 0·10 mm coarser than in zone 50. The medium‐grained quartz in zones 40 and 45 flows may have been slightly coarser than the associated mud grains, resulting in the preferential deposition of quartz in proximal areas and downslope enrichment of the flows in mud. In zone 50 flows, mud was probably slightly coarser than the associated fine‐grained quartz, resulting in early mud sedimentation and enrichment of the distal flows in fine‐grained quartz and feldspar. Mud particles in all flows may have had an effective grain size of ≈ 0·25 mm. Both mud content and suspended‐load fallout rate played key roles in the sedimentation of Britannia slurry flows and structuring of the resulting deposits. During deposition of zones 40 and 45, the area of the eastern Britannia Field in block 16/26 may have been a locally enclosed subbasin within which the depositing slurry flows were locally ponded. Slurry beds in the eastern Britannia Field are ‘lumpy’ sheet‐like bodies that show facies changes but little additional complexity. There is no thin‐bedded facies that might represent waning flows analogous to low‐density turbidity currents. The dominance of laminar, cohesion‐dominated shear layers during sedimentation prevented most bed erosion, and the deposystem lacked channel, levee and overbank facies that commonly make up turbidity current‐dominated systems. Britannia slurry flows, although turbulent and capable of size‐fractionating even fine‐grained sediments, left sand bodies with geometries and facies more like those deposited by poorly differentiated laminar debris flows.  相似文献   

Surface structure effects on direct reduction of iron oxides by Shewanella oneidensis     

Andrew L. Neal  Kevin M. Rosso  Yuri A. Gorby 《Geochimica et cosmochimica acta》2003,67(23):4489-4503

The atomic and electronic structure of mineral surfaces affects many environmentally important processes such as adsorption phenomena. They are however rarely considered relevant to dissimilatory bacterial reduction of iron and manganese minerals. In this regard, surface area and thermodynamics are more commonly considered. Here we take a first step towards understanding the nature of the influence of mineral surface structure upon the rate of electron transfer from Shewanella oneidensis strain MR-1 outer membrane proteins to the mineral surface and the subsequent effect upon cell “activity.” Cell accumulation has been used as a proxy for cell activity at three iron oxide single crystal faces; hematite (001), magnetite (111) and magnetite (100). Clear differences in cell accumulation at, and release from the surfaces are observed, with significantly more cells accumulating at hematite (001) compared to either magnetite face whilst relatively more cells are released into the overlying aqueous phase from the two magnetite faces than hematite. Modeling of the electron transfer process to the different mineral surfaces from a decaheme (protoporphyrin rings containing a central hexacoordinate iron atom), outer membrane-bound cytochrome of S. oneidensis has been accomplished by employing both Marcus and ab initio density functional theories. The resultant model of electron transfer to the three oxide faces predicts that over the entire range of expected electron transfer distances the highest electron transfer rates occur at the hematite (001) surface, mirroring the observed cell accumulation data. Electron transfer rates to either of the two magnetite surfaces are slower, with magnetite (111) slower than hematite (001) by approximately two orders of magnitude. A lack of knowledge regarding the structural details of the heme-mineral interface, especially in regards to atomic distances and relative orientations of hemes and surface iron atoms and the conformation of the protein envelope, precludes a more thorough analysis. However, the results of the modeling concur with the empirical observation that mineral surface structure has a clear influence on mineral surface-associated cell activity. Thus surface structure effects must be accounted for in future studies of cell-mineral interactions.  相似文献   

Formation of metal in Grosvenor Mountains 95551 and comparison to ordinary chondrites     

Andrew J. Campbell 《Geochimica et cosmochimica acta》2003,67(13):2481-2495

Siderophile element abundances in individual metal grains in the ungrouped chondrite Grosvenor Mountains (GRO) 95551 and in the ordinary chondrites Tieschitz H3.6, Soko-Banja LL4, and Allegan H5 were measured with laser ablation-inductively coupled plasma mass spectrometry. Matrix metal in GRO 95551 falls into two distinct compositional groups, a high-Ni group with 7.2 ± 0.4 wt% Ni and a low-Ni group with 3.7 ± 0.1 wt% Ni, indicating that kamacite/taenite equilibration at ∼1020 K was followed by rapid cooling. The nonrefractory siderophile elements P, Co, Cu, Ga, Ge, As, Pd, and Au also partition between the high-Ni and low-Ni metal in a manner consistent with kamacite/taenite fractionation, but the refractory siderophiles Ru, Re, Os, Ir, and Pt show correlated variations that are unrelated to kamacite/taenite partitioning and indicate that variations in refractory components of the metal were not completely erased during equilibration at ∼1020 K. The Ni-normalized bulk metal composition of GRO 95551 is refractory depleted and volatile rich relative to Bencubbin and related metal-rich chondrites but bears strong similarities to equilibrated ordinary chondrite metal. GRO 95551 represents a new chondrite type with chemical affinity to the ordinary chondrites. Individual metal grains in unequlibrated ordinary chondrites also have correlated variations in refractory siderophile contents that cannot be produced by redox processes alone; these variations span three orders of magnitude and diminish with increasing metamorphic grade of the ordinary chondrites.  相似文献   

Recent advances in accessibility research: Representation,methodology and applications   总被引：22，自引：0，他引：22  

Mei-Po Kwan  Alan T. Murray  Morton E. O'Kelly  Michael Tiefelsdorf 《Journal of Geographical Systems》2003,5(1):129-138

 In this article we examine recent advances in accessibility research and their implications for future studies. We base our discussion on three intersecting dimensions that are useful for evaluating the contribution of recent studies: representation, methodology and applications. Various examples are selected to show that research concerned with representation and methodological problem solving is often applied to issues of broad concern in policy and planning. It is, however, not clear that the simultaneous treatment of representation, methodological and application issues has ever been fully worked out. The questions raised in this article may serve as a foundation for addressing issues pertinent to accurate representation, improved model building, and more rigorous applications in accessibility research. Received: 9 December 2002 / Accepted: 10 February 2003  相似文献   

Invariants in toroidal and tangentially geostrophic frozen-flux velocity fields     

Andrew Jackson  Raymond Hide 《Geophysical Journal International》1996,125(3):925-927

We derive two new types of invariant that must be obeyed by the radial magnetic field at the core-mantle boundary if the hypothesis of frozen flux is valid and the fluid motion is either toroidal or tangentially geostrophic there. These general invariants incorporate specific invariants that are already known and can, in principle, be tested using magnetic data that cover an interval of time.  相似文献