Using Hydrogeochemical Methods To Evaluate Complex Quaternary Subsurface Stratigraphy Block Island,Rhode Island,USA     

Anne I. Veeger  Byron D. Stone 《Hydrogeology Journal》1996,4(4):69-82

One of the major problems in hydrogeologic investigations of glaciated regions is the determination of complex stratigraphic relationships in the subsurface where insufficient information is available from drilling and geophysical records. In this paper, chemical characteristics of groundwater were used to identify stratigraphic changes in glacial deposits that were previously inferred on Block Island, Rhode Island, USA, an emergent remnant of the late Wisconsinan terminal moraine, located approximately 16 km south of the Rhode Island mainland. Two chemically distinct water types are recognized on the island: 1) high-iron, characterized by dissolved silica levels in excess of 20 mg/L, bicarbonate greater than 30 mg/L and dissolved iron ranging from 1-20 mg/L; and 2) low-iron, characterized by dissolved silica levels below 16 mg/L, bicarbonate less than 30 mg/L, and less than 0.3 mg/L dissolved iron. The spatial distribution of iron-bearing minerals and organic matter and the resulting redox conditions are believed to control the occurrence of high-iron groundwater. The high-iron waters occur almost exclusively in the eastern half of the island and appear to coincidence with the presence of allochthonous blocks of Cretaceous-age coastal-plain sediments that were incorporated into Pleistocene-age deposits derived from the Narragansett Bay-Buzzard's Bay lobe of the Late Wisconsinan Laurentide ice sheet. The low-iron waters occur in the western half of the island, where the occurrence of these Cretaceous-age blocks is rare and the sediments are attributed to a sublobe of the Hudson-Champlain lobe of the Late Wisconsinan ice-sheet. RÉSUMÉ: L'un des principaux problèmes dans les études hydrogeologiques des régions qui ont été englacées est la définition des relations stratigraphiques complexes sous la surface, lá où les informations fournies par les forages et par la géophysique sont insuffisantes. Dans l'exemple traité, les caractéristiques chimiques de l'eau souterraine sont utilisées pour identifier les variations stratigraphiques dans les dépôts glaciaires qui avaient auparavant été supposées, sur l'île de Block (Rhode Island), restes émergeant d'une moraine terminale du Wisconsinien récent, situé à environ 16 km au sud de Rhode Island. Deux types d'eau chimiquement distincts ont été reconnus dans l'île: 1) à fortes teneurs en fer, caractérisées par des concentrations en silice supérieures à 20 mg/L, en bicarbonates supérieures à 30 mg/L et en fer comprises entre 1 et 20 mg/L; et 2) à faibles teneurs en fer, marquées par des concentrations en silice inférieures à 16 mg/L, en bicarbonate inférieures à 30 mg/L et en fer dissous inférieures à 0.3 mg/L. La distribution spatiale des minéraux riches en fer et de la matière organique et les conditions redox résultantes contrôlent probablement la présence de fer dans les eaux souterraines à fortes concentrations. Les eaux à fortes teneurs en fer sont connues presque exclusivement dans la moitié orientale de l'île et semblent coïncider avec la présence de blocs allochtones provenant des sédiments côtiers crétacés, introduits dans les formations pléistocènes liées au lobe glaciaire des baies de Narragansett et du Busard de la calotte glaciaire laurentide du Wisconsinien récent. Les eaux à faibles teneurs en fer apparaissent dans la moitié occidentale de l'île, là où ces blocs de Crétacé sont rares et où les sédiments sont attrbués à une digitation du lobe de l'Hudson-Champlain de la calotte glaciaire du Wisconsinien récent. RESUMEN: Uno de los mayores problemas en la investigación hidrogeológica en regiones glaciares es la determinación de las complejas relaciones estratigráficas en el subsuelo, donde la información procedente de registros de perforaciones y de geofísica no es suficiente. En este artículo, se han usado las características químicas del agua subterránea para identificar unos cambios estratigráficos que se habían predicho previamente en unos depósitos glaciares en Block Island, Rhode Island (Estados Unidos), un remanente emergente de la morrena terminal del Winsconsiniense tardío, situada unos 16 km al sur de la Rhode Island continental. En la isla se encuentran dos tipos de agua distintos: 1) de alto contenido en hierro, caracterizada por niveles de sílice disuelto superando los 20 mg/L, bicarbonatos por encima de 30 mg/L y hierro disuelto oscilando entre 1-20 mg/L; y 2) de bajo contenido en hierro, caracterizada por niveles de sílice disuelto inferiores a 16 mg/L, bicarbonatos por debajo de 30 mg/L y menos de 0.3 mg/L de hierro disuelto. La distribución espacial de los minerales ricos en hierro y de la materia orgánica, así como las condiciones redox resultantes se supone que condicionan la presencia de aguas de alto contenido en hierro. Estas aguas aparecen casi exclusivamente en la mitad oriental de la isla y parecen coincidir con la presencia de bloques alóctonos de sedimentos costeros, de edad cretácica, que se incorporaron a los depósitos de edad pleistocena procedentes del lóbulo de la Bahía de Narragansett-Bahía de Buzzard, correspondiente a la capa glaciar del Winsconsiniense-Lauréntido tardío. Las aguas de bajo contenido en hierro aparecen en la mitad occidental de la isla, donde la presencia de estos sedimentos de edad cretácica es rara y los sedimentos se suponen procedentes de un sublóbulo del lóbulo de Hudson-Camplain, correspondiente a la capa glaciar del Winsconsiniense tardío.  相似文献   

Land tenure type as an underrated legal constraint on the conservation management of coastal dunes: examples from Ireland     

John McKenna  Michael MacLeod  rew Cooper  Anne Marie O'Hagan†  James Power‡ 《Area》2005,37(3):312-323

Legal factors play an underrated but significant role as constraints on conservation management. In this paper, based on observations in both Northern Ireland and the Republic of Ireland, mode of land tenure is assessed to determine its influence on the conservation management of coastal dunes. The tenure types considered are: private ownership, corporate private ownership, tenancy, secured tenancy, leasing, common (joint) ownership, uncertain ownership, public ownership and its subset military ownership. It is suggested that multiple private ownership is least likely to favour effective conservation management. Public ownership by a statutory conservation authority and corporate private ownership by a conservation-orientated NGO are regarded as the optimum tenure types for conservation management of coastal dunes.  相似文献   

Crustal and upper mantle seismic structure of the Australian Plate, South Island, New Zealand   总被引：7，自引：0，他引：7  

Anne Melhuish  W. Steven Holbrook  Fred Davey  David A. Okaya  Tim Stern   《Tectonophysics》2005,395(1-2):113-135

Seismic reflection and refraction data were collected west of New Zealand's South Island parallel to the Pacific–Australian Plate boundary. The obliquely convergent plate boundary is marked at the surface by the Alpine Fault, which juxtaposes continental crust of each plate. The data are used to study the crustal and uppermost mantle structure and provide a link between other seismic transects which cross the plate boundary. Arrival times of wide-angle reflected and refracted events from 13 recording stations are used to construct a 380-km long crustal velocity model. The model shows that, beneath a 2–4-km thick sedimentary veneer, the crust consists of two layers. The upper layer velocities increase from 5.4–5.9 km/s at the top of the layer to 6.3 km/s at the base of the layer. The base of the layer is mainly about 20 km deep but deepens to 25 km at its southern end. The lower layer velocities range from 6.3 to 7.1 km/s, and are commonly around 6.5 km/s at the top of the layer and 6.7 km/s at the base. Beneath the lower layer, the model has velocities of 8.2–8.5 km/s, typical of mantle material. The Mohorovicic discontinuity (Moho) therefore lies at the base of the second layer. It is at a depth of around 30 km but shallows over the south–central third of the profile to about 26 km, possibly associated with a southwest dipping detachment fault. The high, variable sub-Moho velocities of 8.2 km/s to 8.5 km/s are inferred to result from strong upper mantle anisotropy. Multichannel seismic reflection data cover about 220 km of the southern part of the modelled section. Beneath the well-layered Oligocene to recent sedimentary section, the crustal section is broadly divided into two zones, which correspond to the two layers of the velocity model. The upper layer (down to about 7–9 s two-way travel time) has few reflections. The lower layer (down to about 11 s two-way time) contains many strong, subparallel reflections. The base of this reflective zone is the Moho. Bi-vergent dipping reflective zones within this lower crustal layer are interpreted as interwedging structures common in areas of crustal shortening. These structures and the strong northeast dipping reflections beneath the Moho towards the north end of the (MCS) line are interpreted to be caused by Paleozoic north-dipping subduction and terrane collision at the margin of Gondwana. Deeper mantle reflections with variable dip are observed on the wide-angle gathers. Travel-time modelling of these events by ray-tracing through the established velocity model indicates depths of 50–110 km for these events. They show little coherence in dip and may be caused side-swipe from the adjacent crustal root under the Southern Alps or from the upper mantle density anomalies inferred from teleseismic data under the crustal root.  相似文献   

Reply to ‘Comment on New UPb zircon ages from Tonga (Cameroon): coexisting Eburnean–Transamazonian (2.1 Ga) and Panafrican (0.6 Ga) imprints’ by Sadrack Félix Toteu and Joseph Penaye     

Evine Laure Tanko Njiosseu  Jean Paul Nzenti  Thophile Njanko  Badibanga Kapajika  Anne Ndlec 《Comptes Rendus Geoscience》2005,337(16):77

  相似文献   

Electrodialytic remediation of CCA-treated waste wood in pilot scale     

Anne J. Pedersen  Iben V. Kristensen  Lisbeth M. Ottosen  Alexandra B. Ribeiro  Arne Villumsen 《Engineering Geology》2005,77(3-4):331-338

When chromated copper arsenate (CCA)-treated wood is removed from service and turns into waste, the contents of Cu, Cr and As remain high due to the strong fixation of CCA in the wood. This high content of toxic compounds presents a disposal challenge. Incineration of CCA-treated waste wood is not allowed in Denmark; instead, the wood is to be land-filled until new methods for handling the wood are available. Since the amounts of CCA-treated wood being removed from service is expected to increase in the years to come, the need for finding alternative handling methods is very relevant. In this study, the usefulness of Electrodialytic Remediation was demonstrated for handling of CCA-treated waste wood in pilot scale. The electrodialytic remediation method, which uses a low-level direct current (DC) as the cleaning agent, combines electrokinetic movement of ions in the wood matrix with the principles of electrodialysis. It has previously been shown that it is possible to remove Cu, Cr and As from CCA-treated wood using electrodialytic remediation in laboratory scale, but until now, the method had not been studied in large scale. The pilot-scale plant used in this study was designed to contain up to 2 m³ wood chips. Six remediation experiments were carried out. In these experiments, the process was up-scaled stepwise by increasing the distance between the electrodes from initially 60 cm to finally 150 cm. The remediation time was varied between 11 and 21 days, and phosphoric acid and/or oxalic acid was used to facilitate the desorption of CCA from the wood. In the most successful of the experiments carried out, the concentration of CCA in the wood was reduced by up to 82% for Cr, 88% for Cu and at least 96% for As.  相似文献   

Case study on the strategy and application of enhancement solutions to improve remediation of soils contaminated with Cu, Pb and Zn by means of electrodialysis   总被引：8，自引：0，他引：8  

Lisbeth M. Ottosen  Anne J. Pedersen  Alexandra B. Ribeiro  Henrik K. Hansen 《Engineering Geology》2005,77(3-4):317-329

Numerous studies have been conducted with electrochemical removal of heavy metals from spiked kaolinite. Meanwhile, when moving from kaolinite to real soils, new factors must be taken into account—factors influencing, e.g., the buffering capacity of the soil against acidification and the adsorption/desorption processes of the heavy metals. The present study gives some examples where it is necessary to use an enhancement solution to aid desorption of Cu, Zn and Pb during electrodialytic treatment. Dependent on the composition of the pollution, different choices can be made. In the case of a Cu-polluted calcareous soil, ammonia may be used as enhancement solution, due to the formation of charged complexes between ammonia and Cu. Thus, Cu is mobile at high pH when ammonia is added and Cu can be removed without dissolving the calcareous parts. Zn is also mobilized by ammonia, but to a lesser extent than Cu. In the case of Cu, Zn and Pb at the same time, alkaline ammonium citrate may be a solution. It was shown that this enhancement solution could mobilize these three pollutants, but optimization of concentration and pH of the ammonium citrate is still needed. When choosing a remediation scheme for electrochemical treatment of an actual industrially polluted soil, this scheme must be chosen on basis of characterization of soil and pollution combination.  相似文献   

February 2005     

Anne Marie de Grosbois 《Environmental Geology》2005,47(3):457-457

  相似文献   

Fowler CMR: The Solid Earth: An Introduction to Global Geophysics     

Anne de Grosbois 《Environmental Geology》2005,48(7):968-968

  相似文献   

Events - July 2005     

Anne Marie de Grosbosis 《Environmental Geology》2005,48(2):280-284

  相似文献   

April 2005     

Anne Marie de Grosbois  Fakhry A. Assaad 《Environmental Geology》2005,47(6):882-882

  相似文献