Mendicino calcarenite was once widely used in traditional constructions by Italy’s foremost stonemasons’ schools. This paper provides a complete physico-mechanical characterization in order to improve understanding of strength and durability properties and so apply that knowledge to conservation and new construction. Stone samples from three lithofacies are taken from the following quarries of Cosenza province: Scannelle in Malito; Cannataro in Carolei; Albanese in San Lucido. Samples are subjected to: X-ray diffraction, mercury intrusion porosimetry, ultrasonic pulse velocity, capillary water absorption, uniaxial compressive, flexural, point load tests with respect to the X, Y, Z axes. Malito samples exhibit creamy colour, better hydric behaviour, low open porosity, reduced water absorption capability, isotropic hydric behaviour, higher fossil abundance (both in number and size) than the lithofacies taken from Carolei and San Lucido, which exhibit whitish colour, greater strength and more homogeneous texture. The greater compactness of Carolei and San Lucido samples can be ascribed to homogeneity and low porosity and their better mechanical properties to textural features. Anisotropy plays an important role. Placing stone samples along the Z axis prevents water intrusion, and improves mechanical strength. Isotropy and compact and heterogeneous fabric in stones result in higher strength and lower water absorption.
This paper describes the main features related to lateral displacements with depth after successive lateral loading–unloading cycles applied to the top of reinforced-concrete flexible bored piles embedded in naturally bonded residual soil. The bored piles under study have a cylindrical shape, with 0.40-m in diameter and 8.0-m in length. Both bored piles types (P1 and P2) include an embedded steel pipe section in their center as longitudinal steel reinforcements: pile type P1 has another 16 steel rods as steel reinforcement to concrete while pile type P2 has no further steel reinforcement. Pile type P1 has three times as much stiffness (EI) and four and a half times the plastic moment (My) than pile type P2. A similar load–displacement performance was observed at initial loads as for small displacements of both piles. At this initial loading stage, the response of the reinforced concrete piles is a function of the soil characteristics and of a linear elastic pile deformation. During this stage, piles can even be understood as probes for evaluating soil reactions. For larger horizontal displacements, after the concrete section starts undergoing large deformations, approaching the ultimate bending moment, pile behavior and consequently the load–displacement relation starts to diverge for both piles. For pile P1 the values of relevant lateral displacements are extended to about 2.5-m in depth, while for pile P2 lateral displacements are mostly constrained to about 2.0-m in depth. Measurements of horizontal displacements of pile P1 against depth recorded with a slope indicator show that, after unloading, lateral loads at distinct stages (small and near failure loads), exhibits a much higher elastic phase of the system response. An analytical fitting model of soil reaction is proposed based on the measured displacements from slope indicator. The integration of a continuous model proposed for the soil reaction agrees fairly well with the measured displacements up to moments close to plastic limit. Results of load–displacement show that the stiffer pile (P1) was able to mobilize twice as much lateral load compared to pile P2 for a service limit displacement of about 20 mm. The paper shows results that enable the isolation of the structural variable through real scale pile load tests, thus granting understanding of its importance and enabling its quantitative visualization in examples of piles embedded in residual soil sites.
Store Mosse (the ‘Great Bog’ in Swedish) is one of the most extensive bog complexes in southern Sweden (~77 km2), where pioneering palaeoenvironmental research has been carried out since the early 20th century. This includes, for example, vegetation changes, carbon and nitrogen dynamics, peat decomposition, atmospheric metal pollution, mineral dust deposition, dendrochronology, and tephrochronology. Even though organic matter (OM) represents the bulk of the peat mass and its compositional change has the potential to provide crucial ecological information on bog responses to environmental factors, peat OM molecular composition has not been addressed in detail. Here, a 568-cm-deep peat sequence was studied at high resolution, by attenuated reflectance Fourier-transform infrared spectroscopy (FTIR-ATR) in the mid-infrared region (4000–400 cm–1). Principal components analysis was performed on selected absorbances and change-point modelling was applied to the records to determine the timing of changes. Four components accounted for peat composition: (i) depletion/accumulation of labile (i.e. carbohydrates) and recalcitrant (i.e. lignin and other aromatics, aliphatics, organic acids and some N compounds) compounds, due to peat decomposition; (ii) variations in N compounds and carbohydrates; (iii) residual variation of lignin and organic acids; and (iv) residual variation of aliphatic structures. Peat decomposition showed two main patterns: a long-term trend highly correlated to peat age (r = 0.87), and a short-term trend, which showed five main phases of increased decomposition (at ~8.4–8.1, ~7.0–5.6, ~3.5–3.1, ~2.7–2.1 and ~1.6–1.3 ka) – mostly corresponding to drier climate and its effect on bog hydrology. The high peat accumulation event (~5.6–3.9 ka), described in earlier studies, is characterized by the lowest degree of peat decomposition of the whole record. Given that FTIR-ATR is a quick, non-destructive, cost-effective technique, our results indicate that it can be applied in a systematic way (including multicore studies) to peat research and provide relevant information on the evolution of peatlands. 相似文献
Landslides - This article describes the behavior of a talus-colluvium deposit up to 70-m thick located in the Serra dos Orgaos, Rio de Janeiro/RJ, Brazil. The monitoring dataset of 13 years... 相似文献
Having a better understanding of air pollutants in railway systems is crucial to ensure a clean public transport. This study measured, for the first time in Brazil, nanoparticles (NPs) and black carbon (BC) on two ground-level platforms and inside trains of the Metropolitan Area of Porto Alegre (MAPA). An intense sampling campaign during thirteen consecutive months was carried out and the chemical composition of NPs was examined by advanced microscopy techniques. The results showed that highest concentrations of the pollutants occur in colder seasons and influenced by variables such as frequency of the trains and passenger densities. Also, internal and external sources of pollution at the stations were identified. The predominance of NPs enriched with metals that increase oxidative stress like Cd, Fe, Pb, Cr, Zn, Ni, V, Hg, Sn, and Ba both on the platforms and inside trains, including Fe-minerals as hematite and magnetite, represents a critical risk to the health of passengers and employees of the system. This interdisciplinary and multi-analytical study aims to provide an improved understanding of reported adverse health effects induced by railway system aerosols. 相似文献
Empirical evidence has shown that particle breakage affects the mechanical behaviour of granular materials. The source of this mechanism takes place at the particle scale, and the main consequence on the macromechanical behaviour is increasing compressibility. Due to the inverse correlation between particle size and particle crushing strength, coarse rockfill materials are particularly vulnerable to mechanical degradation due to particle breakage. However, such coarse materials do not fit in standard laboratory devices, and the alternative of large sample testing is usually unavailable or too expensive. Alternatively, recent works have proposed multi-scale approaches using the discrete element method (DEM) to carry out numerical testing of coarse crushable materials, although few studies have focused on size effects. This article presents the application of a DEM bonded-cell model to study particle size-strength correlation on angular rock aggregates. Each particle is modelled by a cluster of perfectly rigid polyhedral cells with Mohr–Coulomb contact law. Constant cell density within particles implies that the presence of potential fragmentation planes increases with size. Therefore, particle strength decreases with size. A comprehensive sensitivity analysis was carried out through 1477 particle crushing simulations in a given particle size. Based on published experimental data on calcareous rock aggregates, part of the simulations were used for calibration, and 97 additional simulations of a coarser size fraction were performed for validation. The results show a good agreement with the empirical data in terms of size effect and data scatter through Weibull statistics.
Mathematical Geosciences - A data-driven automatic well planner procedure is implemented to develop complex well trajectories by efficiently adapting to near-well reservoir properties and geometry.... 相似文献
Achieving long-term climate mitigation goals in Japan faces several challenges, starting with the uncertain nuclear power policy after the 2011 earthquake, the uncertain availability and progress of energy technologies, as well as energy security concerns in light of a high dependency on fuel imports. The combined weight of these challenges needs to be clarified in terms of the energy system and macroeconomic impacts. We applied a general equilibrium energy economic model to assess these impacts on an 80% emission reduction target by 2050 considering several alternative scenarios for nuclear power deployment, technology availability, end use energy efficiency, and the price of fossil fuels. We found that achieving the mitigation target was feasible for all scenarios, with considerable reductions in total energy consumption (39%–50%), higher shares of low-carbon sources (43%–72% compared to 15%), and larger shares of electricity in the final energy supply (51%–58% compared to 42%). The economic impacts of limiting nuclear power by 2050 (3.5% GDP loss) were small compared to the lack of carbon capture and storage (CCS) (6.4% GDP loss). Mitigation scenarios led to an improvement in energy security indicators (trade dependency and diversity of primary energy sources) even in the absence of nuclear power. Moreover, preliminary analysis indicates that expanding the range of renewable energy resources can lower the macroeconomic impacts of the long term target considerably, and thus further in depth analysis is needed on this aspect.
Key policy insights
For Japan, an emissions reduction target of 80% by 2050 is feasible without nuclear power or CCS.
The macroeconomic impact of such a 2050 target was largest without CCS, and smallest without nuclear power.
Energy security indicators improved in mitigation scenarios compared to the baseline.
This paper shows how post-oil spill management measures can affect the general pattern of fishing effort exerted on two particular species of great commercial value in northern Spanish fisheries: anglerfish (Lophius piscatorius and Lophius budegassa) and mackerel (Scomber scombrus). Data time series of catches and fishing efforts were analysed corresponding to the area and time period affected by the oil spill fishing restrictions (December 2002–June 2003) and similar previous and post-spill periods. This was done to detect shifts that could be due to either the oil spill per se or the management measures taken to minimise pollution effects. Then, analyses and simulations with Arcview GIS module FAST (Fishing Activity Simulation Tool v. 1.1) were carried out with the aim of studying the fishing effort spatial distribution. Changes were observed in the Catch Per Unit Effort (CPUE) of anglerfish and mackerel by area or fishery unit. Results show a spatial displacement of fishing effort to other fishing areas in the case of anglerfish, and the transfer of fishing effort between different fishery units in the case of mackerel. Although both effects were caused primarily by the management measures in force after the oil spill, they are considered side or collateral effects. The management measures that have to be taken after any disaster should also consider these kinds of ancillary effects as well as evaluating the likely positive or negative impact of these side effects. 相似文献
Patellid limpets are key species on rocky shores, structuring intertidal assemblages through their grazing. Their role as prey for fish is, however, often overlooked in studies of intertidal ecosystem functioning. The shanny Lipophrys pholis is a common predator of limpets on rocky shores in Northern Europe and, in this study, we examined the characteristics of its predation on limpets based on prey size. The limpet size range that adult L. pholis (10–12.5 cm) can eat was examined in the laboratory using Patella depressa in 0.2 cm classes, varying between 0.5 cm and 3.0 cm in maximum shell length. There was a limpet size refuge above 1.8 cm, while all smaller sizes were readily consumed by the shanny. The predator attacking behaviour was also examined and found to vary with prey size. Limpets up to 0.8 cm were crushed by the jaw‐constricting force and eaten whole, whereas larger prey were prised from the substratum and the body subsequently separated from the shell. To examine whether there was a L. pholis preference for P. depressa size, a two‐stage laboratory experiment was done using two size classes defined as small (0.7–0.8 cm maximum shell length) and large (1.5–1.6 cm maximum shell length). In the first stage, the predator was given each limpet size class separately. In the second stage, the fish was given a choice between the two classes. Lipophrys pholis was shown to have a preference for the large size class (1.5–1.6 cm). The average number of limpets consumed by the shanny was examined for the duration of one high‐tide typical of the central region of Portugal (≈ 4 h). On average, approximately five limpets (up to an eight limpet maximum) were consumed. The present study shows that L. pholis has a feeding preference based on limpet size, which suggests that the limpet population structure and intra‐ and inter‐specific interactions may be influenced by the shanny predation. 相似文献
