Rock physics modelling based on depositional and burial history of Barents Sea sandstones     

Kenneth Bredesen  Per Avseth  Tor Arne Johansen  Richard Olstad 《Geophysical Prospecting》2019,67(4):825-842

Understanding how physical properties and seismic signatures of present day rocks are related to ancient geological processes is important for enhanced reservoir characterization. In this paper, we have studied this relationship for the Kobbe Formation sandstone in the Barents Sea. These rocks show anomalous low shear velocities and high V_P/V_S ratios, which does not agree well with conventional rock physics models for moderately to well consolidated sandstones. These sandstones have been buried relatively deeply and subsequently uplifted 1–2 km. We compared well log data of the Kobbe sandstone with velocity–depth trends modelled by integrating basin modelling principles and rock physics. We found that more accurate velocity predictions were obtained when first honouring mechanical and chemical compaction during burial, followed by generation of micro-cracks during uplift. We suspect that these micro-cracks are formed as overburden is eroded, leading to changes in the subsurface stress-field. Moreover, the Kobbe Formation is typically heterogeneous and characterized by structural clays and mica that can reduce the rigidity of grain contacts. By accounting for depositional and burial history, our velocity predictions become more consistent with geophysical observables. Our approach yields more robust velocity predictions, which are important in prospect risking and net erosion estimates.  相似文献   

Seismic on floating ice: data acquisition versus flexural wave noise     

Tor Arne Johansen  Bent Ole Ruud  Ronny Tømmerbakke  Kristian Jensen 《Geophysical Prospecting》2019,67(3):532-549

Geophysical surveying of the Arctic will become increasingly important in future prospecting and monitoring of the terrestrial and adjacent areas in this hemisphere. Seismic data acquired on floating ice are hampered with extensive noise due to ice vibrations related to highly dispersive ice flexural waves generated by the seismic source. Several experiments have been conducted on floating ice in van Mijenfjorden in Svalbard in the Norwegian Arctic to specifically analyse the extent of flexural waves recorded with various seismic receivers and sources deployed both on top of ice and in the water below. The data show that flexural waves are severely damped at 5 m or deeper below the ice and hydrophone data suffer less from these vibrations compared with data recorded on the ice. Aliasing of single receiver hydrophone data can to some extent be suppressed using an in-line line source of detonating cord. Experiments on ice on shallow water show prominent guided wave modes often referred to as Scholte waves propagating along the seabed. In this case, both flexural and Scholte waves interfere and make a complicated pattern of coherent noise. On shallow water, the positioning and type of the seismic source must be evaluated with respect to the coherent noise generated by these waves. Geophone strings of 25 m effectively suppress both flexural and Scholte waves due to their relative short wavelengths. An airgun generates relative more low-frequency energy than a surface source of detonating cord. Accordingly, seismic mapping of deep seismic horizons seem to be best achieved using geophone strings of such length and an airgun source. For shallow targets, the use of hydrophones in combination with detonating cord is an appropriate solution. Seismic surveying in the Arctic always have to follow environmental restrictions of not disturbing or harming wildlife and not causing permanent footprints into the vulnerable tundra, which implies that the choice of seismic acquisition strategy might occur as a trade-off between optimum data quality and environmental constraints.  相似文献   

Shocked quartz grains in the early Cambrian Vakkejokk Breccia,Sweden—Evidence of a marine impact     

Carl Alwmark  Jens Orm  Arne T. Nielsen 《Meteoritics & planetary science》2019,54(3):609-620

Here we present a study of the abundance and orientation of planar deformation features (PDFs) in the Vakkejokk Breccia, a proposed lower Cambrian impact ejecta layer in the North‐Swedish Caledonides. The presence of PDFs is widely accepted as evidence for shock metamorphism associated with cosmic impact events and their presence confirms that the Vakkejokk Breccia is indeed the result of an impact. The breccia has previously been divided into four lithological subunits (from bottom to top), viz. lower polymict breccia (LPB), graded polymict breccia (GPB), top sandstone (TS), and top conglomerate (TC). Here we show that the LPB contains no shock metamorphic features, indicating that the material derives from just outside of the crater and represents low‐shock semi‐autochthonous bombarded strata. In the overlying, more fine‐grained GPB and TS, quartz grains with PDFs are relatively abundant (2–5% of the grain population), and with higher shock levels in the upper parts, suggesting that they have formed by reworking of more distal ejecta by resurge of water toward the crater in a marine setting. The absence of shocked quartz grains in the TC indicates that this unit represents later slumps associated with weathering and erosion of the protruding crater rim. Sparse shocked quartz grains (<0.2%) were also found in sandstone beds occurring at the same stratigraphic level as the Vakkejokk Breccia 15–20 km from the inferred crater site. It is currently unresolved whether the sandstone at these distal sites is related to the impact or just contains rare reworked quartz grains with PDFs.  相似文献   

Validation of automated supervised segmentation of multibeam backscatter data from the Chatham Rise,New Zealand     

Jess I. T. Hillman  Geoffroy Lamarche  Arne Pallentin  Ingo A. Pecher  Andrew R. Gorman  Jens Schneider von Deimling 《Marine Geophysical Researches》2018,39(1-2):205-227

Using automated supervised segmentation of multibeam backscatter data to delineate seafloor substrates is a relatively novel technique. Low-frequency multibeam echosounders (MBES), such as the 12-kHz EM120, present particular difficulties since the signal can penetrate several metres into the seafloor, depending on substrate type. We present a case study illustrating how a non-targeted dataset may be used to derive information from multibeam backscatter data regarding distribution of substrate types. The results allow us to assess limitations associated with low frequency MBES where sub-bottom layering is present, and test the accuracy of automated supervised segmentation performed using SonarScope® software. This is done through comparison of predicted and observed substrate from backscatter facies-derived classes and substrate data, reinforced using quantitative statistical analysis based on a confusion matrix. We use sediment samples, video transects and sub-bottom profiles acquired on the Chatham Rise, east of New Zealand. Inferences on the substrate types are made using the Generic Seafloor Acoustic Backscatter (GSAB) model, and the extents of the backscatter classes are delineated by automated supervised segmentation. Correlating substrate data to backscatter classes revealed that backscatter amplitude may correspond to lithologies up to 4 m below the seafloor. Our results emphasise several issues related to substrate characterisation using backscatter classification, primarily because the GSAB model does not only relate to grain size and roughness properties of substrate, but also accounts for other parameters that influence backscatter. Better understanding these limitations allows us to derive first-order interpretations of sediment properties from automated supervised segmentation.  相似文献   

High resolution climate simulations over the Arctic   总被引：1，自引：0，他引：1  

Annette Rinke  Klaus Dethloff  Arne Spekat  Wolfgang Enke  Jens Hesselbjerg Christensen 《Polar research》1999,18(2):143-150

The regional atmospheric climate model HIRHAM has been applied to the Arctic. Simulations for the whole year 1990 and for an ensemble of winter months (January of 1985-1995) have been performed. The comparison of the simulations with observational data analyses shows that the general spatial patterns are in good agreement with the data, in both the vertical structure and the annual cycle. For an additional validation of the model results, a multivariate classification of large-scale circulation patterns has been applied to the January ensemble model simulations.  相似文献   

Statistics on a Sphere     

Arne Gidskehaug 《Geophysical Journal International》1976,45(3):657-676

  相似文献   

A robust approach to global problems in physical geodesy     

Arne Bjerhammar 《Journal of Geodesy》1985,59(4):303-315

A technique for renormalization of integral equations is used for obtaining very robust solutions. The number of multiplications used for inverting the integral equations can be reduced dramatically and mostly only weighted means will be needed. Theoretical gain in computer time might be up to 100 000 times for the most favourable cases when using 1000 unknowns. (Practical gains will be considerably less.) Solutions have been obtained with increased accuracy compared to the classical technique over integral equations. Surface elements might be of arbitrary size but the method is optimal for a global approach with equal area elements. The solutions were found strictly invariant with respect to the depth to the internal sphere, when using simpler models. Applications in surveying are possible after some modifications. Renormalization of integral equation has been widely used in the theory of quantum field.  相似文献   

Electron microscope study of peridotite xenoliths in kimberlites     

Arne Olsen  Tore Birkeland 《Contributions to Mineralogy and Petrology》1973,42(2):147-157

Dislocation structures in naturally deformed olivine from garnet peridotite xenoliths from South African kimberlites have been studied by electron microscopy. The substructure consists mainly of straight subboundaries of dislocations with Burgers vectors [001]. Most of the dislocations have both edge and screw components, and the slip planes are mainly (100). The dislocation density between the subboundaries is low.The slip planes in olivine are discussed in relation to the olivine structure. The observed dislocation structures seem to indicate that the large difference in strain rate between natural and experimental deformation will produce a difference in the slip mechanisms.The nature of the deformation lamellae visible in optical microscope is discussed.  相似文献   

Differential exhumation in response to episodic thrusting along the eastern margin of the Tibetan Plateau   总被引：34，自引：0，他引：34  

Dennis Arne  Brenton Worley  Christopher Wilson  She Fa Chen  David Foster  Zhi Li Luo  Shu Gen Liu  Paul Dirks 《Tectonophysics》1997,280(3-4):239-256

Thermochronological data from the Songpan-Ganze˛Fold Belt and Longmen Mountains Thrust-Nappe Belt, on the eastern margin of the Tibetan Plateau in central China, reveal several phases of differential cooling across major listric thrust faults since Early Cretaceous times. Differential cooling, indicated by distinct breaks in age data across discrete compressional structures, was superimposed upon a regional cooling pattern following the Late Triassic Indosinian Orogeny. ⁴⁰Ar/³⁹Ar data from muscovite from the central and southern Longmen Mountains Thrust-Nappe Belt suggest a phase of differential cooling across the Wenchuan-Maouwen Shear Zone during the Early Cretaceous. The zircon fission track data also indicate differential cooling across a zone of brittle re-activation on the eastern margin of the Wenchuan-Maouwen Shear Zone during the mid-Tertiary, between 38 and 10 Ma. Apatite fission track data from the central and southern Longmen Mountains Thrust-Nappe Belt reveal differential cooling across the Yingxiu-Beichuan and Erwangmiao faults during the Miocene. Forward modelling of apatite fission track data from the northern Longmen Mountains Thrust-Nappe Belt suggests relatively slow regional cooling through the Mesozoic and early Tertiary, followed by accelerated cooling during the Miocene, beginning at ca. 20 Ma, to present day.

Regional cooling is attributed to erosion during exhumation of the evolving Longmen Mountains Thrust-Nappe Belt (LMTNB) following the Indosinian Orogeny. Differential cooling across the Wenchuan-Maouwen Shear Zone and the Yingxiu-Beichuan and Erwangmiao faults is attributed to exhumation of the hanging walls of active listric thrust faults. Thermochronological data from the Longmen Mountains Thrust-Nappe Belt reveal a greater amount of differential exhumation across thrust faults from north to south. This observation is in accord with the prevalence of Proterozoic and Sinian basement in the hanging walls of thrust faults in the central and southern Longmen Mountains. The two most recent phases of reactivation occurred following the initial collision of India with Eurasia, suggesting that lateral extrusion of crustal material in response to this collision was focused along discrete structures in the LMTNB.  相似文献   

A large-mesh salmon trap: a way of mitigating seal impact on a coastal fishery   总被引：1，自引：2，他引：1  

Lunneryd  Sven Gunnar; Fjalling  Arne; Westerberg  Hakan 《ICES Journal of Marine Science》2003,60(6):1194-1199

  相似文献