Mixed layer depth front and subduction of low potential vorticity water under seasonal forcings in an idealized OGCM     

Shiro Nishikawa  Atsushi Kubokawa 《Journal of Oceanography》2012,68(1):53-62

The mixed layer depth (MLD) front and subduction under seasonal variability are investigated using an idealized ocean general circulation model (OGCM) with simple seasonal forcings. A sharp MLD front develops and subduction occurs at the front from late winter to early spring. The position of the MLD front agrees with the curve where \({\rm D}T_{\rm s}/{\rm D}t = \partial T_{\rm s} /\partial t + {\user2{u}}_{\rm g} \cdot \nabla T_{\rm s} = 0\) is satisfied (t is time, \({\user2{u}}_{\rm g}\) is the upper-ocean geostrophic velocity, \(T_{\rm s}\) is the sea surface temperature (SST), and \(\nabla\) is the horizontal gradient operator), indicating that thick mixed-layer water is subducted there parallel to the SST contour. This is a generalization of the past result that the MLD front coincides with the curve \({\user2{u}}_{\rm g} \cdot \nabla T_{\rm s} = 0\) when the forcing is steady. Irreversible subduction at the MLD front is limited to about 1 month, where the beginning of the irreversible subduction period agrees with the first coincidence of the MLD front and \({\rm D}T_{\rm s}/{\rm D}t =0\) in late winter, and the end of the period roughly corresponds to the disappearance of the MLD front in early spring. Subduction volume at the MLD front during this period is similar to that during 1 year in the steady-forcing model. Since the cooling of the deep mixed-layer water occurs only in winter and SST can not fully catch up with the seasonally varying reference temperature of restoring, the cooling rate of SST is reduced and the zonal gradient of the SST in the northwestern subtropical gyre is a little altered in the seasonal-forcing case. These effects result in slightly lower densities of subducted water and the eastward shift of the MLD front.  相似文献   

Reaction-induced grain boundary cracking and anisotropic fluid flow during prograde devolatilization reactions within subduction zones     

Atsushi?OkamotoEmail author  Hiroyuki?Shimizu  Jun-ichi?Fukuda  Jun?Muto  Takamoto?Okudaira 《Contributions to Mineralogy and Petrology》2017,172(9):75

Devolatilization reactions during prograde metamorphism are a key control on the fluid distribution within subduction zones. Garnets in Mn-rich quartz schist within the Sanbagawa metamorphic belt of Japan are characterized by skeletal structures containing abundant quartz inclusions. Each quartz inclusion was angular-shaped, and showed random crystallographic orientations, suggesting that these quartz inclusions were trapped via grain boundary cracking during garnet growth. Such skeletal garnet within the quartz schist formed related to decarbonation reactions with a positive total volume change (?V _t > 0), whereas the euhedral garnet within the pelitic schists formed as a result of dehydration reaction with negative ?V _t values. Coupled hydrological–chemical–mechanical processes during metamorphic devolatilization reactions were investigated by a distinct element method (DEM) numerical simulation on a foliated rock that contained reactive minerals and non-reactive matrix minerals. Negative ?V _t reactions cause a decrease in fluid pressure and do not produce fractures within the matrix. In contrast, a fluid pressure increase by positive ?V _t reactions results in hydrofracturing of the matrix. This fracturing preferentially occurs along grain boundaries and causes episodic fluid pulses associated with the development of the fracture network. The precipitation of garnet within grain boundary fractures could explain the formation of the skeletal garnet. Our DEM model also suggests a strong influence of reaction-induced fracturing on anisotropic fluid flow, meaning that dominant fluid flow directions could easily change in response to changes in stress configuration and the magnitude of differential stress during prograde metamorphism within a subduction zone.  相似文献   

Evolution of Mount Fuji,Japan: Inference from drilling into the subaerial oldest volcano,pre‐Komitake     

Mitsuhiro Yoshimoto  Toshitsugu Fujii  Takayuki Kaneko  Atsushi Yasuda  Setsuya Nakada  Akikazu Matsumoto 《Island Arc》2010,19(3):470-488

A buried, old volcanic body (pre‐Komitake Volcano) was discovered during drilling into the northeastern flank of Mount Fuji. The pre‐Komitake Volcano is characterized by hornblende‐bearing andesite and dacite, in contrast to the porphyritic basaltic rocks of Komitake Volcano and to the olivine‐bearing basaltic rocks of Fuji Volcano. K‐Ar age determinations and geological analysis of drilling cores suggest that the pre‐Komitake Volcano began with effusion of basaltic lava flows around 260 ka and ended with explosive eruptions of basaltic andesite and dacite magma around 160 ka. After deposition of a thin soil layer on the pre‐Komitake volcanic rocks, successive effusions of lava flows occurred at Komitake Volcano until 100 ka. Explosive eruptions of Fuji Volcano followed shortly after the activity of Komitake. The long‐term eruption rate of about 3 km³/ka or more for Fuji Volcano is much higher than that estimated for pre‐Komitake and Komitake. The chemical variation within Fuji Volcano, represented by an increase in incompatible elements at nearly constant SiO₂, differs from that within pre‐Komitake and other volcanoes in the northern Izu‐Bonin arc, where incompatible elements increase with increasing SiO₂. These changes in the volcanism in Mount Fuji may have occurred due to a change in regional tectonics around 150 ka, although this remains unproven.  相似文献   

A Late Cretaceous mammalian dentary from the Ashizawa Formation (Futaba Group), Fukushima,northeastern Japan          下载免费PDF全文

Nao Kusuhashi  Tadashi Suzuki  Kazuaki Terui  Atsushi Sato  Romain Amiot 《Island Arc》2016,25(6):403-409

A mammalian dentary discovered in the Coniacian Ashizawa Formation (Fukushima, northeastern Japan) is described. The specimen is a fragment of the horizontal ramus of a left edentulous dentary with five alveoli, the distal four of which are plugged with broken roots. Based on the morphologies of the dentary and the roots, it is considered to be of a therian mammal. This constitutes the first discovery of a Mesozoic mammal in northeastern Japan and highlights the potential for future mammal discoveries in the Cretaceous System in northeastern Japan, which will be significant for disclosure of the mammalian faunal evolution in East Asia during the Late Cretaceous.  相似文献   

Genetic algorithm for fitting a mixed Bingham distribution to 3D orientations: a tool for the statistical and paleostress analyses of fracture orientations          下载免费PDF全文

Atsushi Yamaji 《Island Arc》2016,25(1):72-83

The clustering of fracture orientations is important for tectonic studies and for geotechnical engineering. In this study, a real‐coded genetic algorithm was adopted to fitting a mixed Bingham distribution to orientation data by maximizing the log‐likelihood function of the distribution. The maximization is a difficult problem, because the function has multimodality and singularity. It was found that the algorithm was effective for this problem. Given the orientations of dilational fractures, the present method determines not only the stress axes and stress ratio of each of the fracture groups but also the maximum non‐dimensionalized fluid pressure at the time of their formation. In addition, the software calculates the 95 % error ellipses of the concentration axes. The present method found that the orientations of ore veins of the Akenobe Mine, SW Japan, should be partitioned into three clusters. It is shown that two of the groups had distinctive Zn and Sn contents, and that the ore fluids had overpressures only slightly greater than the minimum principal stress at the time of the deposition of Zn‐ and Sn‐rich veins.  相似文献   

Estimating the impact force generated by granular flow on a rigid obstruction   总被引：12，自引：4，他引：8  

Shuji Moriguchi  Ronaldo I. Borja  Atsushi Yashima  Kazuhide Sawada 《Acta Geotechnica》2009,4(1):57-71

Flowing sediments such as debris and liquefied soils could exert a tremendous amount of force as they impact objects along their paths. The total impact force generally varies with slope angle, velocity at impact, and thickness of the flowing sediment. Estimation of the impact force of flowing sediments against protective measures such as earth retaining structures is an important factor for risk assessment. In this paper, we conduct small-scale laboratory physical modeling of sand flow at different slopes and measure the impact force exerted by this material on a fixed rigid wall. We also conduct numerical simulations in the Eulerian framework using computational fluid dynamics algorithms to analyze and reproduce the laboratory test results. The numerical simulations take into consideration the overtopping of the wall with sand, which influenced the measured impact force–time history responses. In addition, the numerical simulations are shown to capture accurately the change of the impact force with slope angle. Finally, the modeling approach conducted in this study is used to estimate the quasi-static force generated by the sediment as it comes to rest on the wall following impact.  相似文献   

Pacific superplume-related oceanic basalts hosted by accretionary complexes of Central Asia, Russian Far East and Japan   总被引：5，自引：0，他引：5  

I. Yu. Safonova  A. Utsunomiya  S. Kojima  S. Nakae  O. Tomurtogoo  A.N. Filippov  K. Koizumi 《Gondwana Research》2009,16(3-4):587-608

Plume-related oceanic magmatism form oceanic islands, seamounts and plateaus (hereafter “seamounts” or “paleoseamounts”), which are important features in geological history. The accretion of oceanic seamounts to active continental margins significantly contributed to the formation of the continental crust. This paper reviews occurrences of Late Neoproterozoic–Mesozoic seamounts of the Paleo-Asian and Paleo-Pacific oceans, which are hosted by accretionary complexes (ACs) of Russian Altai, East Kazakhstan, Mongolia, Russian Far East and Japan. The paleoseamounts commonly consist of Ti–LREE–Nb-enriched plume-related basalts (OIB-type or intraplate basalts) capped with massive limestone and associated with other units of oceanic plate stratigraphy (OPS): oceanic floor basalts (MORB), pelagic chert, epiclastic slope facies, etc. The paper presents available geochemical data on the plume-related basalts including the first geochemical data on the Middle Paleozoic OIB-type basalts of the Paleo-Asian Ocean hosted by the Ulaanbaatar AC of Mongolia. An emphasis is made for the structural setting of OPS units, specific geochemical features of intraplate basalts, problems of their identification, and distinguishing from magmatic units of a different origin such as MORB, island-arc and back-arc basalts. Finally, we propose a continuous, though periodical, evolution of the Pacific superplume-related magmatism, which can be more reliably proved by studying Middle Paleozoic OPS units hosted by ACs of Mongolia and Tien Shan, and discuss prospects of future studies.  相似文献   

Methods for detecting apparent differences between spatial tessellations at different time points     

Atsushi Masuyama 《International journal of geographical information science》2013,27(6):633-648

This paper proposes methods for detecting apparent differences between spatial tessellations at two different points in time, with the objective of conflation of spatial tessellations at multiple time points. The methods comprise three steps. First, we eliminate systematic differences between tessellations using the affine transformation. Second, we match subregions between tessellations at two points in time and match boundaries based on matching relationships between the subregions. Third, we propose a distance metric for measuring differences between the matched boundaries and a method for determining whether the measured differences are apparent or not. We apply the proposed methods to a part of the US Census data for 1990 and 2000 and empirically demonstrate the effectiveness of these methods.  相似文献   

Hydrogeochemistry and groundwater salinization in an ephemeral coastal flood plain: Cap Bon,Tunisia     

Anis Chekirbane  Maki Tsujimura  Atsushi Kawachi  Hiroko Isoda  Jamila Tarhouni  Abdallah Benalaya 《水文科学杂志》2013,58(5):1097-1110

Abstract

The Wadi Al Ayn plain is a coastal system on the eastern coast of Cap Bon in northeastern Tunisia. The area is known for its intensive agriculture, which is based mainly on groundwater exploitation. The aim of this study is to identify the sources of groundwater salinization in the Wadi Al Ayn aquifer system and deduce the processes that drive the mineralization. Surface water and groundwater samples were taken and analysed for major ions and stable isotopes. The geochemical data were used to characterize and classify the water samples based on a variety of ion plots and diagrams. Stable isotopes are useful tools to help us understand recharge processes and to differentiate between salinity origins. The oilfield brines infiltrated from the sandy bed of Wadi Al Ayn comprise the main source of groundwater salinization in the central part of the plain, while seawater intrusion is mainly responsible for the increased salinity in the groundwater of the coastal part of the plain (at Daroufa).

Citation Chekirbane, A., Tsujimura, M., Kawachi, A., Isoda, H., Tarhouni, J., and Benalaya, A., 2013. Hydrogeochemistry and groundwater salinization in an ephemeral coastal flood plain: Cap Bon, Tunisia. Hydrological Sciences Journal, 58 (5), 1097–1110.  相似文献   

The social and political complexities of learning in carbon capture and storage demonstration projects     

Nils Markusson  Atsushi Ishii 《Global Environmental Change》2011,21(2):293-302

Demonstration of a fully integrated power plant with carbon capture and storage (CCS) at scale has not yet been achieved, despite growing international political interest in the potential of the technology to contribute to climate change mitigation and calls from multiple constituents for more demonstration projects. Acknowledging the scale of learning that still must occur for the technology to advance towards deployment, multiple CCS demonstration projects of various scales are emerging globally. Current plans for learning and knowledge sharing associated with demonstration projects, however, seem to be limited and narrowly conceived, raising questions about whether the projects will deliver on the expectations raised. Through a comparison of the structure, framing and socio-political context of three very different CCS demonstration projects in different places and contexts, this paper explores the complexity of social learning associated with demonstration projects. Variety in expectations of the demonstration projects’ objectives, learning processes, information sharing mechanisms, public engagement initiatives, financing and collaborative partnerships are highlighted. The comparison shows that multiple factors including the process of building support for the project, the governance context and the framing of the project matter for the learning in demonstration projects. This analysis supports a broader conceptualization of learning than that currently found in CCS demonstration plans - a result with implications for both future research and practice.  相似文献