Geomechanical evaluation of Pliocene natural aggregates as pavement materials     

El-Sayed Sedek Abu Seif 《Arabian Journal of Geosciences》2014,7(4):1567-1576

Asphaltic roads and constructions in Egypt annually consume a huge amount of aggregates. The physical and geomechanical properties of these aggregates have controlled their performance in which they are used. All road pavements require the efficient use of locally available materials if economically constructed roads are to be built. More than 650 million m³ of fine and coarse aggregates are herein selected to be the tonnage of the present study. The studied Pliocene aggregates have smoothed grading curves and neither a deficiency nor excess of any one particle size, generally produce good mixtures with fewer voids between particles. The litho-particles of coarse aggregates are composed mainly of granites, gneisses, granodiorite, gabbro, and quartz particles. The sand equivalent value of fine aggregates varies from 95 to 97 %. The specific gravity values of the studied aggregates vary from 2.72 to 2.74 gm/cm³ for coarse aggregate and range from 2.51 to 2.54 gm/cm³ for fine aggregate. The Los Angles abrasion value varies from 19 to 24 %. Both coarse and fine aggregates meet the international standards which are suitable for usage as subbase and surface course aggregates, respectively.  相似文献   

Evaluation of Fragments from Disc Cutting of Dry and Saturated Sandstone     

M. Z. Abu Bakar  L. S. Gertsch  J. Rostami 《Rock Mechanics and Rock Engineering》2014,47(5):1891-1903

As the use of mechanical excavation in tunneling and mining activities expands, so has the use of disc cutters in various ground conditions. The impact of moisture content on rock behavior and rock excavation by disc cutters is examined in this study. This was done through a series of full-scale cutting tests using a 292 mm (11.5 in.) disc cutter in a moderate strength sandstone. The muck from the cutting tests was used to determine coarseness index (CI) and absolute size constant (x′). x′ was calculated using Rosin–Rammler distribution (or Weibull) curve, a statistical technique to look at the fragmented rock products. This approach is very popular among the mineral-processing professionals for the evaluation of the particle sizes of the comminution products. x′ and CI show a reasonable correlation with the specific energy of cutting and production rate. Both of these indicators were found to be dependent on the cut spacing and the interaction between the adjacent cuts, as anticipated. This paper explains the background information on this topic, reviews the laboratory testing, and offers analysis of the results of grain size distribution and its relationship with specific energy and cutting geometry. It should be noted that the experimental program was limited to only one rock type and additional testing on the other rock types is required to expand the results of the current study.  相似文献   

Head—on collision of nonlinear dust—acoustic solitary waves in dusty plasmas with dust of opposite polarities     

S. K. El-Labany  E. F. El-Shamy  M. Abu El-Eneen 《Astrophysics and Space Science》2012,337(1):275-281

The propagation and the head—on collision of nonlinear dust—acoustic solitary waves (DASWs) in dusty plasmas consisting of electrons, ions and negative as well as positive dust particles are investigated. Applying an extended Poincaré-Lighthill-Kuo (PLK) method, Kortwege-de Vries equations and analytical phase shifts after the head-on collision of two DASWs in dusty plasmas are obtained. Analytically and numerically, the relevance of the phase shifts and trajectories to the positive-to-negative dust number density ratio, the ratio of the ion number density to negative dust number density, negative-to-positive dust particle mass ratio, and the ion-to-electron temperature ratio effects is explicitly demonstrated. Moreover, the current findings are applied to different regions of space, viz. cometary tails, mesosphere, Jupiter’s magnetosphere.  相似文献   

Coupling of remote sensing data and environmental-related parameters for dengue transmission risk assessment in Subang Jaya,Malaysia     

Nazri Che Dom  Abu Hassan Ahmad  Zulkiflee Abd Latif  Rodziah Ismail 《国际地球制图》2013,28(3):258-272

In Malaysia, the endemic level of dengue fever (DF) has already changed morbidity indicators, and the magnitude of these incidences in the last few years has surpassed the incidences of all other diseases of compulsory notification. The reasons for the dramatic emergence of DF are complex and not well understood. There are many factors that contribute to the epidemiological conditions that favour viral transmission by the main mosquito vector. This study, therefore, is filling this gap by analysing the impact of dengue incidence at a local (Subang Jaya) scale using environmental factors. Meteorological data and land-use pattern were consolidated using geographic information system (GIS) and its components as an analytical tool. We have shown that weather variables (relative humidity, temperature and precipitation) have significant correlation with DF incidence with seasonal variation. Besides land-use pattern, DF incidence shows the higher distribution in the residential area, followed by commercial and industrial area. This is due to the higher population density in residential area as well as favourable places for the breeding of dengue-carrying Aedes mosquitos created by humans in the residential area, especially one-storey houses. The analysis on the trends of DF incidence towards various housing types indicate that most of the victims’ houses fall into interconnection houses and mixed houses types compared to the independent houses area. The outcome driven from this analysis suggested that each character of the environmental factors has their own risk towards dengue incidence. In line with that, it is possible to develop a dynamic model of DF transmission using the knowledge produced by this comprehensive time series data and the results provided by the different analyses.  相似文献   

Effect of Ozone and Ozone/Fenton in the Advanced Oxidation Process on Biodegradable Characteristics of Semi‐aerobic Stabilized Leachate     

Salem S. Abu Amr  Hamidi Abdul Aziz  Mohd Nordin Adlan  Shuokr Qarani Aziz 《洁净——土壤、空气、水》2013,41(2):148-152

This study investigated the effects of O₃ and O₃/H₂O₂/Fe²⁺ in the advanced oxidation processes (AOPs) on the biodegradable and soluble characteristics of semi‐aerobic stabilized solid waste leachate. The biodegradability (BOD₅/chemical oxygen demand, COD) ratio improved from 0.034 to 0.05 and 0.1 following O₃ and O₃/H₂O₂/Fe²⁺, respectively. Fractions of biodegradable COD_(bi) (24%), non‐biodegradable COD_(ubi) (76%), soluble COD_(s) (59%), biodegradable soluble COD_(bsi) (38%), non‐biodegradable soluble COD_(ubsi) (62%), and particulate COD (PCOD) (41%) in stabilized leachate were also investigated. The fraction of COD_(bi) increased to 28 and 36% after applying O₃ and O₃/AOPs, respectively. COD_(S) increased to 59% after O₃ and to 72% after O₃/AOPs, whereas COD_(bsi) increased to 38 and 51% after O₃ and O₃/AOPs, respectively. The removal efficiency of COD_(S) was obtained at 5% after O₃ alone and improved to 51% following ozone‐based AOPs, whereas the removal efficiency of PCOD improved from 25% after O₃ to 71% after ozone‐based AOPs.  相似文献   

Impacts of human activities on the sedimentological and geochemical characteristics of Mabahiss Bay, North Hurghada, Red Sea, Egypt     

Osama Elsayed Ahmed Attia  Ahmed M. Abu Khadra  Ahmed H. Nawwar  Gamal E. Radwan 《Arabian Journal of Geosciences》2012,5(3):481-499

In Mabahiss Bay, north Hurghada City, Red Sea, Egypt, the bathymetric measurements show the irregular topography of the bottom. The bottom sediments are mainly composed of sand fractions (average 73.5%). Gravel and sand contents decrease with depth. On the other hand, silt and clay percents show indirect relation with depth. Abnormally, there are some spots found near the coast where the percent of both silt and clay increases. They also show carbonate sediments (average 90.15%) increasing toward the bay center. The narrow belt adjacent to the shore area has lower carbonate content reflecting the effect of clastic sediments input into the area. The sediments in the study area have more than one source as indicated from the results of the mechanical analysis. Wide range of grain size distributions, clay spots and low carbonate content near the shore indicate change in the nature of sedimentary environment (i.e., pollution) which may be caused by land filling accompanied with urbanization and building of touristic resorts and centers. The organic matter content in the sediments is much higher than that of the other areas in the Red sea (average 4.8%) with considerable accumulation in the inner most parts of the bay. This may be due to relative abundance of organic productivity, direct discharge of domestic waste in some spots along the coast of the study area, and/or local contamination of hydrocarbons (i.e., tar balls thrown out on shore by weak waves through the few inlets of the study area). The average concentrations of lead, nickel, copper, and cadmium are 44, 34, 51, and 3.1?ppm, respectively. The suggested origin of these metals is either organic (localized oil pollution), or using of antifouling and anticorrosive paints from fishing and tourist boats. Other metals, particularly manganese (average 77?ppm), cobalt (average 51?ppm), and zinc (average 16?ppm) as well as sodium (average 0.32%) and potassium (av. 0.10%) show a common trend of increasing concentration toward the outermost parts of the bay. Some parts along shoreline have increasing concentrations, even if these parameters having a common trend of increase towards the center of the bay. This may be either due to sewage and wastewaters discharges from many outlets of tourist centers and fishermen and cargo boats, and/or terrestrial sediments input. Direct comparison of the present levels of heavy metals in Mabahiss Bay with other published data along the Red Sea and Gulf of Suez shows that the study area has higher concentrations. Dredging, land filling, localized oil pollution, using of antifouling and anticorrosive paints from fishing and tourist boats (where the bay is used as harbor for many of fishermen and cargo boats), sewage, variable amounts of municipal wastewater from many outlets of tourist centers considered to be the sources of pollution within Mabahiss bay. There are many effects of pollution on Mabahiss Bay environment among which: (1) death of fishes, seaweeds, birds, marine mammals, etc., (2) damage of beaches and other recreational areas, (3) damage of marine ecosystem by eliminating or decreasing population of certain species, (4) hazard to human from ingesting contaminated food, and more.  相似文献   

Origin of wehrlite cumulates in the Moho transition zone of the Neoproterozoic Ras Salatit ophiolite,Central Eastern Desert,Egypt: crustal wehrlites with typical mantle characteristics     

Hisham?A.?GahlanEmail author  Shoji?Arai  Fawzy?F.?Abu El-Ela  Akihiro?Tamura 《Contributions to Mineralogy and Petrology》2012,163(2):225-241

Ultramafic cumulates, mainly crustal true wehrlites, were discovered and described in the mantle–crust transition zone (MTZ) and the extremely lower layered gabbro sequence of the Ras Salatit ophiolite, Central Eastern Desert, Egypt. They form either boudinaged lensoidal tabular bodies or interdigitated layers often concordant with the planolinear fabrics of the Ras Salatit ophiolite rocks. The contact between wehrlites and the host MTZ dunite or layered gabbro is razor sharp, lobate and/or sinuous, without chilled margins or any visible deformations. The Ras Salatit wehrlites are orthopyroxene-free and composed mainly of olivine and clinopyroxene. They are texturally equilibrated and show a characteristic poikilitic texture. Crystallization order of the Ras Salatit wehrlites is olivine/spinel followed by clinopyroxene with the absence of plagioclase. Olivine and clinopyroxene of the Ras Salatit wehrlites are compositionally uniform and conspicuously high in Mg#, mostly around 0.93 and 0.92, respectively. Moreover, the clinopyroxene shows low Ti and Al contents coupled with marked depletion in LILE. The calculated melt in equilibrium with clinopyroxene from the Ras Salatit wehrlites is largely similar to lavas from the Izu-Bonin forearc. Given the above characteristics, the Ras Salatit wehrlites were produced by crystal accumulation from a hydrous depleted basaltic/tholeiitic melt corresponding to temperatures between 1,000 and 1,100°C at the oceanic crustal pressure (~2 kbar). The involved hydrous tholeiitic melt has been probably formed by fluid-assisted partial melting of a refractory mantle source (similar to the underlying harzburgites) in a somewhat shallow sub-arc environment.  相似文献   

Earthquake induced pounding between adjacent buildings considering soil-structure interaction     

Sadegh Naserkhaki  Farah N.A.Abdul Aziz  Hassan Pourmohammad 《地震工程与工程振动(英文版)》2012,11(3):343-358

Many closely located adjacent buildings have suffered from pounding during past earthquakes because they vibrated out of phase.Furthermore,buildings are usually constructed on soil;hence,there are interactions between the buildings and the underlying soil that should also be considered.This paper examines both the interaction between adjacent buildings due to pounding and the interaction between the buildings through the soil as they affect the buildings’ seismic responses.The developed model consists of adjacent shear buildings resting on a discrete soil model and a linear viscoelastic contact force model that connects the buildings during pounding.The seismic responses of adjacent buildings due to ground accelerations are obtained for two conditions:fixed-based(FB) and structure-soil-structure interaction(SSSI).The results indicate that pounding worsens the buildings’ condition because their seismic responses are amplified after pounding.Moreover,the underlying soil negatively impacts the buildings’ seismic responses during pounding because the ratio of their seismic response under SSSI conditions with pounding to those without pounding is greater than that of the FB condition.  相似文献   

On the Use and Error of Approximation in the Domenico (1987) Solution     

C.E. Aziz  P.C. de Blanc  C.J. Newell 《Ground water》2009,47(1):5-6

  相似文献   

Voigt regularization for the explicit time stepping of the Hall effect term     

Aziz Takhirov 《地球物理与天体物理流体动力学》2016,110(5):409-431

This article studies the stabilization of the explicit time stepping methods for Hall Maxwell and incompressible Hall MHD equations. Since the Hall effect term contains two spatial derivatives, classical time-stepping schemes result in very restrictive CFL condition. We consider weakening the restrictive time step condition via Voigt regularization. We establish the energy stability result and validate our approach numerically. Numerical experiments demonstrate that we are able to take larger time steps, compared to classical schemes, at additional, negligible computational cost.  相似文献