Marble mylonites in the Bancroft shear zone, Ontario, Canada: microstructures and deformation mechanisms     

van der Pluijm Ben A. 《Journal of Structural Geology》1991,13(10)

Mylonitization of medium-grade marbles in the Bancroft shear zone, Ontario, Canada, is characterized by decreasing grain-size of both calcite and graphite, and a variety of textures. Calcite grain-sizes vary from several millimeters in the protolith, to 50–200 μm in mylonite, to <30 μm in ultramylonite. Corresponding calcite grain shapes are equant in the protolith, elongate in protomylonite (first-developed dimensional preferred orientation), equant in coarse mylonite, elongate in fine mylonite (second-developed dimensional preferred orientation) and generally equant in ultramylonite, which suggests that external energy (applied stress) that tends to elongate grains competed with internal energy sources (e.g. distortional strain) that favor equant shapes. Graphite grain-size changes from several millimeters to centimeters in the protolith to submicroscopic in ultramylonite. In the mylonitic stages, graphite is present as dark bands, while in the ultramylonitic stage it is preserved as a fine coating on calcite grains.Based on textural evidence, twinning (exponential creep; regime I), dynamic recrystallization (power law creep; regime II) and possibly grain boundary sliding superplasticity (regime III) are considered the dominant deformation mechanisms with increasing intensity of mylonitization; their activity is largely controlled by calcite grain-size. Calcite grain-size reduction occurred predominantly by the process of rotation recrystallization during the early stages of mylonitization, as indicated by the occurrence of core and mantle or mortar structures, and by the grain-size of subgrains and recrystallized grains. Grain elongation in S-C structures indicates the activity of migration recrystallization; these structures are not the result of flattening of originally equant grains. Differential stress estimates in coarse mylonites and ultramylonites, based on recrystallized grain-size, are 2–5 and 14–38 MPa, respectively. Initial grain-size reduction of graphite occurred by progressive separation along basal planes, analogous to mica fish formation in quartzo-feldspathic mylonites.Calcite-graphite thermometry on mylonitic and ultramylonitic samples shows that the metamorphic conditions during mylonitization were 475 ± 50°C, which, combined with a differential stress value of 26 MPa, gives a strain rate of 1.2 x 10⁻¹⁰s⁻¹ based on constitutive equations; corresponding displacement rates are <38 mmyr⁻¹.  相似文献   

A mechanism for preferential H2O leakage from fluid inclusions in quartz,based on TEM observations     

Ronald J. Bakker  J. Ben H. Jansen 《Contributions to Mineralogy and Petrology》1994,116(1-2):7-20

Preferential leakage of H₂O from fluid inclusions containing multiple gas components has been suspected in natural metamorphic rocks and has been demonstrated experimentally for synthetic H₂O-CO₂-rich inclusions in natural quartz. Knowledge of the physical and chemical characteristics of the leakage mechanism, which may be very complex, increases the value of natural fluid inclusions to metamorphic geology. It is proposed that crystal defects play a major role in nondecrepitative preferential H₂O leakage through quartz, and remain effective during metamorphism. Inclusions with either an internal overpressure or underpressure produce strain in the adjacent quartz crystal via the nucleation of many dislocations and planar defects (like Dauphiné twin boundaries). These defects allow preferential loss of H₂O from H₂O-CO₂-rich inclusions at supercritical conditions. The transport capacity of this leakage mechanism is enhanced by nucleation of small bubbles on defect structures. The nucleation of these bubbles seems to be a recovery process in strained crystals. Solubility gradients of quartz in water in a crystal with internally underpressurized inclusions may result in optical visible implosion halos in a three dimensional spatial arrangement, caused by the growth of small bubbles at the expense of the larger original fluid inclusion. Natural fluid inclusions from Naxos (Greece) are always associated with numerous interlinked dislocations. These dislocations may have been produced by plastic derormation or by crystal growth related processes (e.g. crack healing). The presence of small bubbles on these dislocations indicates that a similar leakage mechanism for H₂O must have occurred in these rocks.  相似文献   

Mica beards in three slates: Morphology,formation and bearing on the strain history     

Ben A. van der Pluijm 《International Journal of Earth Sciences》1984,73(3):1037-1053

Beards are intergrowths of mica, chlorite and quartz or feldspar on detrital grains in weakly metamorphosed sedimentary rocks. The three samples studied contain beards of mica and quartz (or feldspar). Their internal morphology shows a variation in mica orientation related to the external foliation (matrix). Formation occurred during foliation development with a syntaxial growth history. In three dimensions, the beards have oblate shapes, so that they are present in all planes cut parallel to the shortening direction. This indicates flattening strain conditions around the detrital grains during the beard formation.Bulk inhomogeneous shortening, resulting in an anastomosing foliation, can explain the local extension within the plane containing the fold axis and the shortening direction. Concurrently, an approximately constant lenght in the direction of the fold axis is maintained on a regional scale (plane strain). Volume loss probably plays an important role during the formation history.

---

Zusammenfassung Glimmerbärte in schwach metamorphen Sedimenten sind syntektonische Verwachsungen von Glimmer, Chlorit, Quarz oder Feldspat auf detritischen Körnern. Die drei hier untersuchten Proben enthalten Bärte aus Hellglimmer und Quarz (oder Feldspat). Die Glimmerorientierung zeigt Variationen in Relation zum umgebenden Schieferungsgefüge (Matrix). Die Bildung der Bärte fand mit syntaxialem Wachstum während der Schieferung statt. Dreidimensional haben die Bärte eine abgeplattete Gestalt, so daß sie in allen Schnittlagen parallel zur Verkürzungsrichtung zu beobachten sind. Dies weist auf plättende Verformung um detritische Körner während der Bildung der Bärte hin.Bulk inhomogeneous shortening führt zu einem linsigen Schieferungsgefüge und kann bei gleichzeitiger Annahme einer nicht volumenkonstanten Deformation als Erklärung für die im Korngefüge beobachtete Dehnung parallel zur Faltenachse herangezogen werden. Im regionalen Maßstab wird aber eine konstante Länge in Richtung der Faltenachse und damit ebene Deformation angenommen.

---

Résumé Les barbes de mica sont des intercroissances de quartz (ou feldspath) et de mica sur des grains détritiques dans les roches sédimentaires peu métamorphisées. Elles ont été étudiées dans trois échantillons. Leur morphologie interne montre une variation dans l'orientation du mica en relation avec la schistosité externe (matrice). Leur formation s'est produite pendant le développement de la schistosité, avec une histoire de croissance «syntaxiale». Les barbes ont une forme oblongue en trois dimensions, de sorte qu'elles sont visibles dans toutes les sections parallèles à la direction de raccourcissement. Cela indique, pendant la formation des barbes, l'existence d'un aplatissement autour des grains détritiques.Le raccourcissement non homogène, qui entraîne une foliation anastomosée peut être invoqué, conjointement à une déformation avec perte de volume, pour expliquer l'allongement que présente localement la microstructure parallèlement à l'axe des plis. A l'échelle régionale, toutefois, on admet la constance de la longuer selon la direction des axes et, partant, le caractère plan de la déformation.

---

, (Glimmerbärte). Glimmerbärte ( ). — . Glimmerbärte . Glimmerbärte , , . Bulk inhomogeneous shortening , , , . .

  相似文献   

大别造山带毛屋岩体的解体及古地幔性质的厘定   总被引：1，自引：0，他引：1  

匡少平  张宏飞  张本仁  韩吟文 《现代地质》2001,15(4):391-398

根据详细的地球化学 (特别是稀土元素地球化学 )的研究资料 ,提出大别造山带毛屋岩体应该解体。毛屋岩体不是由多幕式镁铁 超镁铁质层状堆晶作用形成的一套岩石系列 ,而是由橄榄岩类、含石榴石方辉岩类、榴辉岩类和绿辉石岩类组成的一个混杂岩体。其中含石榴石方辉岩类与绿辉石岩类之间存在成因上的联系 ,含石榴石方辉岩类的原岩是本区原始地幔经约36 %的部分熔融后剩下的残余 ,而绿辉石岩的原岩是由该熔融体结晶的产物。根据含石榴石方辉岩与绿辉石岩之间的成分制约关系 ,对该区古地幔的稀土元素组成和地幔性质进行了反演 ,结果表明 ,该区原始地幔稀土元素成分与球粒陨石中的相似 ,为轻稀土略亏损的平坦型组成模式 ;该区原始地幔矿物成分为橄榄石 (72 8% )、单斜辉石 (12 4% )和石榴石 (14 8% ) ,属含单辉石榴橄榄岩的地幔。  相似文献   

Questioning development — growth? destruction? sustainability?     

Ben Wisner  Henry R. Luce 《GeoJournal》1995,35(2):99-104

  相似文献   

Centuries of artificial recharge on the southern edge of the Sierra Nevada (Granada,Spain)   总被引：1，自引：0，他引：1  

A. Pulido-Bosch  Y. Ben Sbih 《Environmental Geology》1995,26(1):57-63

In the Alpujarra (southern Spain), every year between the March and June, an ancestral practice continues in the form of diverting water from the rivers by way of an extensive network of irrigation channels (acequias) to well-defined, highly permeable areas. This practice, known ascareos, constitutes an ancient example of artificial recharge. The objective is to guarantee a supply of drinking water during the dry months, as well as improve the physicochemical characteristics of the water. In addition, this system helps maintain moisture in the immediate environment, and thus has a positive effect on local vegetation.  相似文献   

The fraction of galaxies that contain active nuclei and their accretion rates     

M.J. Page 《Monthly notices of the Royal Astronomical Society》2001,328(3):925-930

We investigate the relationship between the present-day optical luminosity function of galaxies and the X-ray luminosity function of Seyfert 1s to determine the fraction of galaxies that host Seyfert 1 nuclei and their Eddington ratios. The local type 1 active galactic nuclei (AGN) X-ray luminosity function is well reproduced if ∼1 per cent of all galaxies are type 1 Seyferts which have Eddington ratios of ∼10⁻³. However, in such a model the X-ray luminosity function is completely dominated by AGN in E and S0 galaxies, contrary to the observed mix of Seyfert host galaxies. To obtain a plausible mix of AGN host galaxy morphologies requires that the most massive black holes in E and S0 galaxies accrete with lower Eddington ratios, or have a lower incidence of Seyfert activity, than the central black holes of later-type galaxies.  相似文献   

Opening address-14th ESLAB symposium     

D. Edgar Page 《Solar physics》1981,74(1):9-9

  相似文献   

Meso-scale testing and development of test procedures to maintain mass balance     

Bonner J  Page C  Fuller C 《Marine pollution bulletin》2003,47(9-12):406-414

The Conrad Blucher Institute for Surveying and Science (Texas A&M University––Corpus Christi) has conducted numerous petroleum experiments at the Shoreline Environmental Research Facility (Corpus Christi, Texas, USA). The meso-scale facility has multiple wave tanks, permitting some control in experimental design of the investigations, but allowing for real-world conditions. This paper outlines the evolution of a materials balance approach in conducting petroleum experiments at the facility. The first attempt at a materials balance was during a 1998 study on the fate/effects of dispersant use on crude oil. Both water column and beach sediment samples were collected. For the materials balance, the defined environmental compartments for oil accumulation were sediments, water column, and the water surface, while the discharge from the tanks was presumed to be the primary sink. The “lessons learned” included a need to quantify oil adhesion to the tank surfaces. This was resolved by adhering strips of the polymer tank lining to the tank sides that could be later removed and extracted for oil. Also, a protocol was needed to quantify any floating oil on the water surface. A water surface (oil slick) quantification protocol was developed, involving the use of solid-phase extraction disks. This protocol was first tested during a shoreline cleaner experiment, and later refined in subsequent dispersant effectiveness studies. The effectiveness tests were designed to simulate shallow embayments which created the need for additional adjustments in the tanks. Since dispersant efficacy is largely affected by hydrodynamics, it was necessary to scale the hydrodynamic conditions of the tanks to those expected in our prototype system (Corpus Christi Bay, Texas). The use of a scaled model permits the experiment to be reproduced and/or evaluated under different conditions. To minimize wave reflection in the tank, a parabolic wave dissipater was built. In terms of materials balance, this design reduced available surface area as a sink for oil adsorption.  相似文献   

Studies of the formation process of water-in-oil emulsions   总被引：2，自引：0，他引：2  

Fingas M  Fieldhouse B 《Marine pollution bulletin》2003,47(9-12):369-396

This paper summarizes studies to determine the formation process of water-in-oil emulsions and the stability of such emulsions formed in the laboratory and in a large test tank. These studies have confirmed that water-in-oil mixtures can be grouped into four states: stable emulsions, unstable water-in-oil mixtures, mesostable emulsions, and entrained water. These states are differentiated by rheological properties as well as by differences in visual appearance. The viscosity of a stable emulsion at a shear rate of one reciprocal second is about three orders of magnitude greater than that of the starting oil. An unstable emulsion usually has a viscosity no more than about 20 times greater than that of the starting oil. A stable emulsion has a significant elasticity, whereas an unstable emulsion does not. A mesostable emulsion has properties between stable and unstable, but breaks down within a few days of standing. The usual situation is that emulsions are either obviously stable, mesostable, or unstable. Entrained water, water suspended in oil by viscous forces alone, is also evident. Very few emulsions have questionable stability. Analytical techniques were developed to test these observations.

The type of emulsion produced is determined primarily by the properties of the starting oil. The most important of these properties are the asphaltene and resin content and the viscosity of the oil. The composition and property ranges of the starting oil that would be required to form each of the water-in-oil states are discussed in this paper.  相似文献