Oceanic plate subduction history in the western Pacific Ocean: Constraint from late Mesozoic evolution of the Tan-Lu Fault Zone   总被引：4，自引：0，他引：4  

Guang Zhu  Cheng Liu  Chengchuan Gu  Shuai Zhang  Yunjian Li  Nan Su  Shiye Xiao 《中国科学:地球科学(英文版)》2018,61(4):386-405

The NE- to NNE-striking Tan-Lu Fault Zone (TLFZ) is the largest fault zone in East China, and a typical representative for the circum-Pacific tectonics. Its late Mesozoic evolution resulted from subduction of the Paleo-Pacific Plate, and can be used for indication to the subduction history. The TLFZ reactivated at the end of Middle Jurassic since its origination in Middle Triassic. This phase of sinistral motion can only be recognized along the eastern edge of the Dabie-Sulu orogenis, and indicates initiation of the Paleo-Pacific (Izanagi) Plate subduction beneath the East China continent. After the Late Jurassic standstill, the fault zone experienced intense sinistral faulting again at the beginning of Early Cretaceous under N-S compression that resulted from the NNW-ward, low-angle, high-speed subduction of the Izanagi Plate. It turned into normal faulting in the rest of Early Cretaceous, which was simultaneous with the peak destruction of the North China Craton caused by backarc extension that resulted from rollback of the subducting Izanagi Plate. The TLFZ was subjected to sinistral, transpressive displacement again at the end of Early Cretaceous. This shortening event led to termination of the North China Craton destruction. The fault zone suffered local normal faulting in Late Cretaceous due to the far-field, weak backarc extension. The late Mesozoic evolution of the TLFZ show repeated alternation between the transpressive strike-slip motion and normal faulting. Each of the sinistral faulting event took place in a relatively short period whereas every normal faulting event lasted in a longer period, which are related to the subduction way and history of the Paleo-Pacific Plates.  相似文献   

The Limiting Factor to the Outbreak of Lake Black Bloom: Roles of Ferrous Iron and Sulfide Ions          下载免费PDF全文

Qiushi Shen  Chengxin Fan  Cheng Liu  Chao Chen 《洁净——土壤、空气、水》2018,46(9)

  相似文献   

Multi‐Scale Fuzzy Inference System for Influent Characteristic Prediction of Wastewater Treatment          下载免费PDF全文

Zhiwei Cheng  Xuejiao Li  Yun Bai  Chuan Li 《洁净——土壤、空气、水》2018,46(7)

  相似文献   

页岩储层叠前密度稳定反演方法          下载免费PDF全文

李金磊  尹成  刘晓晶  陈超  王明飞 《地球物理学报》2019,62(5):1861-1871

密度参数是页岩储层评价的重要敏感参数,但通常认为准确获得密度信息难度较大.本文探索提出了一种稳定的基于弹性阻抗的叠前密度反演方法,以提高优质页岩的识别精度.首先,基于不同的参数化弹性阻抗方程开展密度敏感性分析,优选了敏感性最高的Aki-Richards近似弹性阻抗方程作为反演方程.然后,在弹性阻抗方程线性化的基础上,假设反演方程系数矩阵的逆存在,将密度(取对数)表示为多个角度弹性阻抗(取对数)的加权和,通过井旁道弹性阻抗反演结果与测井数据的回归求取加权系数,避免了常规反演方法对大型系数矩阵的求逆计算,从而提高了密度反演的稳定性,同时由于利用测井资料作为匹配目标,密度反演的精度也得到了提高.模型试算和涪陵页岩气田的实际资料应用实践均表明了该方法能够有效地提高密度反演的精度与稳定性.  相似文献   

基于贝叶斯方法的深层充电效应风险模型评估          下载免费PDF全文

李程  陈东 《地球物理学报》2019,62(6):1991-2000

高能电子穿透航天器并在其内部沉积电荷从而引发深层充电效应,是导致卫星故障的重要因素之一.为了评估深层充电效应诱发卫星异常的风险,本文基于贝叶斯方法,使用一颗地球同步轨道卫星的异常数据和GOES-8卫星的电子通量探测数据,计算了不同能量阈值及累积时间的电子注量、不同卫星配置下模拟仿真的沉积电荷,并分别与卫星异常建立一系列概率风险模型.本文从模型中随机抽样得到模拟异常,并与实测异常构造混淆矩阵以评估模型拟合优度,结果表明1.0MeV电子3日累积注量-卫星异常概率风险模型为该卫星最优模型.本文利用最优模型对该卫星深层充电效应风险进行了计算,在1.0MeV电子3日累积注量达到2.0×10~(10)cm~(-2)·sr~(-1)时,该卫星发生深层充电异常的平均后验概率为27%,且95%最小可信值为22%.根据最优模型,我们对该卫星最可能导致异常的部件的材料和结构等特征做出了推断.  相似文献   

面向目标的起伏地表组合震源延时参数计算方法          下载免费PDF全文

秦龙  尹成  崔永福  刘正文  张振  方兵  陶正武 《地球物理学报》2019,62(4):1492-1501

组合震源技术通过调节延迟激发时间和震源埋藏深度能够实现地震波场的定向传播,提高地震波的照明能量和地震数据信噪比.然而,目前国内外对基于特定目标的组合震源最佳聚焦方向的选取以及起伏地表组合震源定向理论的研究相对较少.在聚焦方向选取方面,目前基本是利用多种不同延时参数的组合震源分别进行试验,从而确定较好的组合震源延时参数.本文则利用爆炸反射面原理,在目的层界面上均匀布置震源同时激发地震波,能够产生垂直于地层界面传播的平面波,当初至波传播至地表时进行地表方向统计.根据互易性原理,以初至波传播方向的反方向为聚焦方向,激发产生的地震波主波束方向将垂直入射到目的层界面上,从而精确的计算出组合震源的最佳聚焦方向.在组合震源定向方面,目前主要是利用组合震源方向因子公式进行计算,但该方法要求震源布置在同一条直线上,并不能满足起伏地表的应用要求.本文以惠更斯-菲涅尔原理为理论基础,提出通过炮点向量在聚焦方向上的投影来确定组合震源传播至虚拟波前的走时,从而确定任意起伏地表组合震源的延迟激发时间.该方法不仅能够计算出沿给定地质模型的目的层界面垂直入射的组合震源聚焦方向,也能够确定任意起伏地表情况下形成沿该聚焦方向定向传播地震波场的组合震源延迟激发时间.因此,本文提出的面向目标的起伏地表组合震源延时参数计算方法对组合震源数据采集具有理论与实践意义.  相似文献   

湛江近海M2分潮的数值模拟   总被引：1，自引：0，他引：1  

路泽廷  杨支中  沙文钰  朱首贤 《海洋通报》2004,23(5):18-24

利用潮汐模型,在高分辨率的自适应曲线网格下,采用潮汐调和常数作为控制模拟精度的方法,模拟了洪江附近海域M2分潮的运动特征。模拟所得的潮汐调和常数同实测值相比,误差较小。根据模拟结果绘制的M2分潮的同潮图,揭示了湛江附近海域M2分潮振幅和迟角的分布特征以及M2分潮的传播和发展规律。模拟得到的M2分潮分别在涨憩、落憩、涨急和落急几个典型时刻的流场,揭示了湛江附近海域M2分潮潮流的分布特征及其运动规律。  相似文献   

Seafloor topography and landform characteristics of Zengmu Shoal waters and their evolvement     

ZHAN Wenhuan  TANG Cheng  ZHANG Yixiang  WANG Ping  ZHANG Yechun  ZHAO Junfeng 《海洋学报(英文版)》2004,23(1):159-168

The topography data of the Zengmu Shoal and its adjacent area are acquired by the SeaBat-8111 multibeam system.The full survey covering over the Zengmu Shoal area gives us new knowledge about the area. It is a flat underwater platform consisting ofcoral reefs, its fathom line is like a trap in near SN direction and its shape is like an isosceles triangle with the acute angle pointing to the north. The east and west sides ofthe shoal are steep while its south side is more gentle. As viewed from geological evolution, the Zengmu Shoal is a typical biologic coral landform caused by tectonic uplift.  相似文献   

“祝融号”火星车多光谱相机岩矿类型识别的地面验证研究   总被引：1，自引：0，他引：1  

谢涓  闫凯  康志忠  徐箫剑  薛彬  杨建峰  陶金有 《遥感学报》2021,25(7):1385-1399

中国首个自主火星探测任务“天问一号”探测器于2020-07成功发射,其搭载的中国首台火星车“祝融号”将在着陆火星后开展巡视探测,获取中国火星探测的原始科学数据。识别火星表面岩矿类型对于了解火星的大气变化、环境状态、地质演化以及生物宜居性等具有重要意义。本研究利用“祝融号”火星车搭载的多光谱相机载荷鉴定件（8个波段）在地球环境下拍摄并获取了18种火星表面岩矿的多光谱影像数据。基于该数据所开展的火星岩矿类型的识别研究可为未来基于“祝融号”多光谱相机数据进行火星表面岩矿的原位识别提供指导。本文所采用的基于多光谱影像波段运算和彩色图像HSV颜色特征直方图的岩矿识别方法,可从多光谱特征和颜色特征两个层面来识别不同类型的岩矿。所使用的多光谱影像数据是在太阳高度角约60°、拍摄高度1.8 m、拍摄角度约37°的条件下采集所得。在该实验条件下,两种识别方法共提取出12种岩矿的识别指标。基于多光谱影像波段运算可以区分出在8个特定波段下具有突出光谱特征的岩矿类型,而基于图像HSV颜色特征可区分出颜色特征分布较为集中的岩矿类型。同时,研究发现拍摄角度不同会对岩矿的识别效果产生不可忽略的影响。  相似文献   

Modeling of an actively braced full‐scale building considering control–structure interaction     

Jong‐Cheng Wu 《地震工程与结构动力学》2000,29(9):1325-1342

Recently, the application of active control to seismic‐excited buildings has attracted international attention. To demonstrate the practical applicability of active control, we have conducted experimental tests using a full‐scale three‐storey building equipped with active bracing systems on the shake table at the National Center for Research on Earthquake Engineering (NCREE), Taiwan. Experimental results indicate that the control–structure interaction (CSI) effect is significant. A state‐space analytical model of this actively controlled building taking into account the CSI effect is established in this paper using a system identification technique based on curve‐fitting of transfer functions. To verify the accuracy of the analytical model for simulating the controlled response, four sets of linear quadratic Gaussian (LQG) controllers using acceleration feedback are designed and further experimental tests are conducted for comparison. It is demonstrated that the correlations between the simulation and experimental results are remarkable. The construction of an accurate analytical model is important for active control, and such an analytical model can be used for future benchmark studies of different control algorithms based on numerical simulations. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献