Investigating the Halogen Chemistry From High-Latitude Nighttime Stratospheric Measurements of OClO and NO2     

Emmanuel Damien Rivière  Michel Pirre  Gwenaël Berthet  Jean-Baptiste Renard  Franck Lefèvre 《Journal of Atmospheric Chemistry》2004,48(3):261-282

Two cases of simultaneous nighttime measurements of NO₂ and OClO in the winter polar stratosphere are analyzed in order to test our present knowledge of halogen chemistry in the presence of high amount of NO₂ at low temperature. Comparisons with Lagrangian model calculations using several hypotheses are performed. First simulations, using the admitted constant rates of chemical reaction, strongly underestimate the measured OClO while the NO₂ profiles are correctly reproduced. If uncertainties in actinic fluxes calculations are taken into account, simulation results do not show a significant reduction of the underestimation. A better agreement can be achieved if the formation of unstable isomers of ClONO₂ and of BrONO₂ occurs in the cold conditions of the polar stratosphere. An approximate value of the branching ratios of the channels leading to ClONO₂ and ClOONO, and to BrONO₂ and BrOONO, necessary to reproduce both OClO and NO₂ is given and discussed.  相似文献   

Numerical simulation of percussive drilling          下载免费PDF全文

Alexandre Depouhon  Vincent Denoël  Emmanuel Detournay 《国际地质力学数值与分析法杂志》2015,39(8):889-912

This paper presents a novel dynamical model to analyze the long‐term response of a percussive drilling system. This departs from existing approaches that usually consider a single activation and bit/rock interaction cycle for the analysis of the process performance. The proposed model integrates the axial dynamics of an elastic piston and an elastic drill bit, a motion‐dependent pressure law to drive the piston, and a generalized bit/rock interaction law representative of the dynamic indentation taking place at the bit/rock interface. It applies to down‐the‐hole percussive drilling as well as top‐hole, with minor modifications. The model does not account for the angular motion or the hole cleaning, however. The model is first formulated mathematically; then, a finite‐dimensional approximation is proposed for computations. Numerical analyses of the model response, for a low‐size down‐the‐hole percussive system, follow. The period‐1 stationary response for the reference configuration is studied in detail, and parametric analyses assessing the influence on the rate of penetration of the bit/rock interaction parameters, the feed force, and the percussive activation parameters are conducted. These analyses reveal that the multiscale nature of the process is well captured by the model and recover expected trends for the influence of the parameters. They also suggest that a significant increase of the penetration rate can be achieved by increasing the percussive frequency. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Facies analysis of the Middle and Late Quaternary sediment infill of the northern Weihe Basin,Central China          下载免费PDF全文

Daniël S. Rits  Maarten A. Prins  Simon R. Troelstra  Ronald T. van Balen  Yan Zheng  Christiaan J. Beets  Bin Wang  Xiaoqiang Li  Jie Zhou  Hongbo Zheng 《第四纪科学杂志》2016,31(2):152-165

  相似文献   

Computational model coupling mode II discrete fracture propagation with continuum damage zone evolution          下载免费PDF全文

Wencheng Jin  Hao Xu  Chloé Arson  Seth Busetti 《国际地质力学数值与分析法杂志》2017,41(2):223-250

We propose a numerical method that couples a cohesive zone model (CZM) and a finite element‐based continuum damage mechanics (CDM) model. The CZM represents a mode II macro‐fracture, and CDM finite elements (FE) represent the damage zone of the CZM. The coupled CZM/CDM model can capture the flow of energy that takes place between the bulk material that forms the matrix and the macroscopic fracture surfaces. The CDM model, which does not account for micro‐crack interaction, is calibrated against triaxial compression tests performed on Bakken shale, so as to reproduce the stress/strain curve before the failure peak. Based on a comparison with Kachanov's micro‐mechanical model, we confirm that the critical micro‐crack density value equal to 0.3 reflects the point at which crack interaction cannot be neglected. The CZM is assigned a pure mode II cohesive law that accounts for the dependence of the shear strength and energy release rate on confining pressure. The cohesive shear strength of the CZM is calibrated by calculating the shear stress necessary to reach a CDM damage of 0.3 during a direct shear test. We find that the shear cohesive strength of the CZM depends linearly on the confining pressure. Triaxial compression tests are simulated, in which the shale sample is modeled as an FE CDM continuum that contains a predefined thin cohesive zone representing the idealized shear fracture plane. The shear energy release rate of the CZM is fitted in order to match to the post‐peak stress/strain curves obtained during experimental tests performed on Bakken shale. We find that the energy release rate depends linearly on the shear cohesive strength. We then use the calibrated shale rheology to simulate the propagation of a meter‐scale mode II fracture. Under low confining pressure, the macroscopic crack (CZM) and its damaged zone (CDM) propagate simultaneously (i.e., during the same loading increments). Under high confining pressure, the fracture propagates in slip‐friction, that is, the debonding of the cohesive zone alternates with the propagation of continuum damage. The computational method is applicable to a range of geological injection problems including hydraulic fracturing and fluid storage and should be further enhanced by the addition of mode I and mixed mode (I+II+III) propagation. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Intensification of Southern Hemisphere westerly winds 2000–1000 years ago: evidence from the subantarctic Campbell and Auckland Islands (52–50°S)          下载免费PDF全文

Chris S. M. Turney  Matt McGlone  Jonathan Palmer  Christopher Fogwill  Alan Hogg  Zoë A. Thomas  Mathew Lipson  Janet M. Wilmshurst  Pavla Fenwick  Richard T. Jones  Ben Hines  Graeme F. Clark 《第四纪科学杂志》2016,31(1):12-19

  相似文献   

Analysis of the interannual variability of annual daily extreme water levels in the St Lawrence River and Lake Ontario from 1918 to 2010          下载免费PDF全文

Ali A. Assani  Raphaëlle Landry  Stacey Biron  Jean‐Jacques Frenette 《水文研究》2014,28(13):4011-4022

We compared the interannual variability of annual daily maximum and minimum extreme water levels in Lake Ontario and the St Lawrence River (Sorel station) from 1918 to 2010, using several statistical tests. The interannual variability of annual daily maximum extreme water levels in Lake Ontario is characterized by a positive long‐term trend showing two shifts in mean (1929–1930 and 1942–1943) and a single shift in variance (in 1958–1959). In contrast, for the St Lawrence River, this interannual variability is characterized by a negative long‐term trend with a single shift in mean, which occurred in 1955–1956. As for annual daily minimum extreme water levels, their interannual variability shows no significant long‐term change in trend. However, for Lake Ontario, the interannual variability of these water levels shows two shifts in mean, which are synchronous with those for maximum water levels, and a single shift in variance, which occurred in 1965–1966. These changes in trend and stationarity (mean and variance) are thought to be due to factors both climatic (the Great Drought of the 1930s) and human (digging of the Seaway and construction of several dams and locks during the 1950s). Despite this change in means and variance, the four series are clearly described by the generalized extreme value distribution. Finally, annual daily maximum and minimum extreme water levels in the St Lawrence and Lake Ontario are negatively correlated with Atlantic multidecadal oscillation over the period from 1918 to 2010. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Intragrain oxygen isotope zoning in titanite by SIMS: Cooling rates and fluid infiltration along the Carthage‐Colton Mylonite Zone,Adirondack Mountains,NY, USA     

C. E. Bonamici  R. Kozdon  T. Ushikubo  J. W. Valley 《Journal of Metamorphic Geology》2014,32(1):71-92

Oxygen isotopes are an attractive target for zoning studies because of the ubiquity of oxygen‐bearing minerals and the dependence of mineral ¹⁸O/¹⁶O ratios on temperature and fluid composition. In this study, subtle intragrain oxygen isotope zoning in titanite is resolved at the 10‐μm scale by secondary ion mass spectrometry. The patterns of δ¹⁸O zoning differ depending on microstructural context of individual grains and reflect multiple processes, including diffusive oxygen exchange, partial recrystallization, grain‐size reduction, and grain growth. Using the chronological framework provided by structural relations, these processes can be related to specific events during the Grenville orogeny. Titanite was sampled from two outcrops within the Carthage‐Colton Mylonite Zone (CCMZ), a long‐lived shear zone that ultimately accommodated exhumation of the Adirondack Highlands from beneath the Adirondack Lowlands during the Ottawan phase (1090–1020 Ma) of the Grenville orogeny. Titanite is hosted in the Diana metasyenite complex, which preserves three sequentially developed fabrics: an early NW‐dipping protomylonitic fabric (S₁) is crosscut by near‐vertical ultramylonitic shear zones (S₂), which are locally reoriented by a NNW‐dipping mylonitic fabric (S₃). Texturally early titanite (pre‐S₂) shows diffusion‐dominated δ¹⁸O zoning that records cooling from peak Ottawan, granulite‐facies conditions. Numerical diffusion models in the program Fast Grain Boundary yield good fits to observed δ¹⁸O profiles for cooling rates of 50 ± 20 °C Ma^?1, which are considerably faster than the 1–5 °C Ma^?1 cooling rates previously inferred for the Adirondack Highlands from regional thermochronology. High cooling rates are consistent with an episode of rapid shearing and exhumation along the CCMZ during gravitational collapse of the Ottawan orogen at c. 1050 Ma. Texturally later titanite (syn‐S₂) has higher overall δ¹⁸O and shows a transition from diffusion‐dominated to recrystallization‐dominated δ¹⁸O zoning, indicating infiltration of elevated‐δ¹⁸O fluids along S₂ shear zones and continued shearing below the blocking temperature for oxygen (~≤500 °C for grain sizes at the study site). The texturally latest titanite (post‐S₃) has growth‐dominated δ¹⁸O zoning, consistent with porphyroblastic grain growth following cessation of shearing along the Harrisville segment of the CCMZ.  相似文献   

External controls on the distribution,fabrics and mineralization of modern microbial mats in a coastal hypersaline lagoon,Cayo Coco (Cuba)   总被引：1，自引：0，他引：1       下载免费PDF全文

Anthony Bouton  Emmanuelle Vennin  Aurélie Pace  Raphaël Bourillot  Christophe Dupraz  Christophe Thomazo  Arnaud Brayard  Guy Désaubliaux  Pieter T. Visscher 《Sedimentology》2016,63(4):972-1016

Active, carbonate‐mineralizing microbial mats flourish in a tropical, highly evaporative, marine‐fed lagoonal network to the south of Cayo Coco Island (Cuba). Hypersaline conditions support the development of a complex sedimentary microbial ecosystem with diverse morphologies, a variable intensity of mineralization and a potential for preservation. In this study, the role of intrinsic (i.e. microbial) and extrinsic (i.e. physicochemical) controls on microbial mat development, mineralization and preservation was investigated. The network consists of lagoons, forming in the interdune depressions of a Pleistocene aeolian substratum; they developed due to a progressive increase in sea‐level since the Holocene. The hydrological budget in the Cayo Coco lagoonal network changes from west to east, increasing the salinity. This change progressively excludes grazers and increases the saturation index of carbonate minerals, favouring the development and mineralization of microbial mats in the easternmost lagoons. Detailed mapping of the easternmost lagoon shows four zones with different flooding regimes. The microbial activity in the mats was recorded using light–dark shifts in conjunction with microelectrode O₂ and HS^? profiles. High rates of O₂ production and consumption, in addition to substantial amounts of exopolymeric substances, are indicative of a potentially strong intrinsic control on mineralization. Seasonal, climate‐driven water fluctuations are key for mat development, mineralization, morphology and distribution. Microbial mats show no mineralization in the permanently submersed zone, and moderate mineralization in zones with alternating immersion and exposure. It is suggested that mineralization is also driven by water‐level fluctuations and evaporation. Mineralized mats are laminated and consist of alternating trapping and binding of grains and microbially induced magnesium calcite and dolomite precipitation. The macrofabrics of the mats evolve from early colonizing Flat mats to complex Cerebroid or Terrace structures. The macrofabrics are influenced by the hydrodynamic regime: wind‐driven waves inducing relief terraces in windward areas and flat morphologies on the leeward side of the lagoon. Other external drivers include: (i) storm events that either promote (for example, by bioclasts covering) or prevent (for example, by causing erosion) microbial mat preservation; and (ii) subsurface degassing, through mangrove roots and desiccation cracks covered by Flat mats (i.e. forming Hemispheroids and Cerebroidal structures). These findings provide in‐depth insights into understanding fossil microbialite morphologies that formed in lagoonal settings.  相似文献   

Impact of land-surface initialization on sub-seasonal to seasonal forecasts over Europe     

Chloé Prodhomme  Francisco Doblas-Reyes  Omar Bellprat  Emanuel Dutra 《Climate Dynamics》2016,47(3-4):919-935

  相似文献   

Impacts of Indian and Atlantic oceans on ENSO in a comprehensive modeling framework     

Pascal Terray  Sébastien Masson  Chloé Prodhomme  Mathew Koll Roxy  K. P. Sooraj 《Climate Dynamics》2016,46(7-8):2507-2533

  相似文献