Pollen representation,source area,and basin size: Toward a unified theory of pollen analysis     

I.Colin Prentice 《Quaternary Research》1985,23(1):76-86

The concepts of pollen source area and of production and dispersal biases in pollen representation are quantified by means of a simple theoretical model. Source areas and relative pollen representation are shown to depend on basin size according to functions that describe the amount of pollen remaining airborne at increasing distances from single pollen sources. The form of these functions is determined by physical processes. Standard formulas for elevated sources do not apply, but the integrated form of Sutton's equation for particle dispersal from a ground-level source gives useful approximations applicable to pollen transport over a forest canopy. Simulations using this equation yielded source areas that increased realistically with basin size, showed substantial differences between source areas for pollen grains with different deposition velocities, and predicted that lighter pollen grains should become better represented with increasing basin size. All of these predictions are qualitatively consistent with present knowledge of the characteristics of pollen assemblages in different depositional environments. The model further allows parameters that can be estimated by statistical calibration methods to be predicted from underlying physical quantities. This extension suggests procedures for testing the theory with quantitative data on surface pollen and forest composition. Preliminary results showed reasonable agreement between estimated and predicted values of dispersal indices for the most abundant taxa in pollen spectra from the northern midwestern United States.  相似文献   

Permo-Triassic tectonic evolution and metallogenesis of the Rockhampton—Maryborough area, Queensland — A photogeological investigation     

Colin R. Nash 《Ore Geology Reviews》1986,1(2-4)

Structural analysis of remotely sensed data provides a method of assessing the tectonic significance of regional metallogenic lineaments in the New England Orogen of southeastern Queensland. Photogeological analysis of Landsat imagery and small-scale aerial photography reveals a pattern of WNW—NNW-oriented structures, which were apparently generated in response to Mesozoic crustal extension and reactivated during Early Tertiary block faulting. These structures tend to overprint arcuate late Palaeozoic to early Mesozoic trends and batholith belts, and exert a control over Middle to Late Triassic rifting and epizonal plutonism. The distribution of epigenetic base and precious metal deposits in the Rockhampton—Maryborough area is locally but not regionally related to identifiable structural lineaments.  相似文献   

Estimation of meiobenthic nematode diversity by non-specialists     

Colin G. Moore  Scot Mathieson  David J. L. Mills  Brian J. Bett 《Marine pollution bulletin》1987,18(12):646-649

A methodology is presented for the estimation of nematode diversity using Cairns' technique of sequential comparisons. The accuracy and precision of the method are examined and a test presented for the comparison of diversity estimates.  相似文献   

Reply     

T. Grant Caldwell  Hugh M. Bibby  Colin Brown 《Geophysical Journal International》2007,171(2):567-567

  相似文献   

Asymmetry in the time-lapse seismic response to injection and depletion     

Colin M. Sayers 《Geophysical Prospecting》2007,55(5):699-705

Large changes in seismic reflection amplitude have been observed around injectors, and result from the decrease in elastic‐wave velocity due to the increase in pore pressure in the reservoir. In contrast, the velocity change resulting from the decrease in pore pressure in depleting reservoirs is observed to be smaller in magnitude. Elastic‐wave velocities in sandstones vary with stress due to the presence of stress‐sensitive grain boundaries within the rock. Grain‐boundary stiffness increases non‐linearly with increasing compressive stress, due to increased contact between opposing faces of the boundary. This results in a change in velocity due to a decrease in pore pressure that is smaller than the change in velocity caused by an increase in pore pressure, in agreement with time‐lapse seismic observations. The decrease in porosity resulting from depletion is not fully recovered upon re‐pressurization, and this leads to an additional steepening of the velocity vs. effective stress curve for injection relative to depletion. This difference is enhanced by any breakage of cement or weakening of grain contacts that may occur during depletion and by the reopening or formation of fractures or joints and dilation of grain boundaries that may occur during injection.  相似文献   

Late Quaternary clay minerals off Middle Vietnam in the western South China Sea: Implications for source analysis and East Asian monsoon evolution     

Christophe COLIN 《中国科学D辑(英文版)》2007,50(11):1674-1684

High-resolution clay mineral records combined with oxygen isotopic stratigraphy over the past 450 ka during late Quaternary from Core MD05-2901 off Middle Vietnam in the western South China Sea are re-ported to reconstruct a history of East Asian monsoon evolution. Variations in Illite, chlorite, and kaolinite contents indicate a strong glacial-interglacial cyclicity, while changes in smectite content present a higher frequency cyclicity. The provenance analysis indicates a mixture of individual clay minerals from various sources surrounding the South China Sea. Smectite derived mainly from the Sunda shelf and its major source area of the Indonesian islands. Illite and chlorite originated mainly from the Mekong and Red rivers. Kaolinite was provided mainly by the Pearl River. Spectral analysis of the kaolin-ite/(illite chlorite) ratio displays a strong eccentricity period of 100 ka, implying the ice sheet-forced win-ter monsoon evolution; whereas higher frequency changes in the smectite content show an ice sheet-forced obliquity period of 41 ka, and precession periods of 23 and 19 ka and a semi-precession period of 13 ka as well, implying the tropical-forced summer monsoon evolution. The winter monsoon evolution is generally in coherence with the glacial-interglacial cyclicity, with intensified winter monsoon winds during glacials and weakened winter monsoon winds during interglacials; whereas the summer monsoon evolution provides an almost linear response to the summer insolation of low latitude in the Northern Hemisphere, with strengthened summer monsoon during higher insolation and weakened summer monsoon during lower insolation. The result suggests that the high-latitude ice sheet and low-latitude tropical factor could drive the late Quaternary evolution of East Asian winter and summer monsoons, respectively, implying their diplex and self-contained forcing mechanism.  相似文献   

Study of the erosion rates in the upper Maracujá Basin (Quadrilátero Ferrífero/MG,Brazil) by the in situ produced cosmogenic 10Be method     

André Salgado  César Varajão  Fabrice Colin  Régis Braucher  Angélica Varajão  Herminio Nalini Jr 《地球表面变化过程与地形》2007,32(6):905-911

The present work quantifies the erosive processes in the two main substrates (schists–phyllites and granites–gneisses) of the upper Maracujá Basin in the Quadrilátero Ferrífero/MG, Brazil, a region of semi‐humid tropical climate. Two measuring methods of concentration were used: (i) in situ produced ¹⁰Be in quartz veins (surface erosion rates) and (ii) ¹⁰Be in fluvial sediments (basin erosion rates). The results confirm that (i) erosion tends to be more aggressive close to the headwaters than in the lower parts of the basin and (ii) the region is now affected by dissection. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Preface     

A. Colin de Verdiére 《Surveys in Geophysics》2001,22(3):177-177

  相似文献   

Distorted Froude‐scaled flume analysis of large woody debris     

Nicholas P. Wallerstein  Carlos V. Alonso  Sean J. Bennett  Colin R. Thorne 《地球表面变化过程与地形》2001,26(12):1265-1283

This paper presents the results of a movable‐boundary, distorted, Froude‐scaled hydraulic model based on Abiaca Creek, a sand‐bedded channel in northern Mississippi. The model was used to examine the geomorphic and hydraulic impact of simplified large woody debris (LWD) elements. The theory of physical scale models is discussed and the method used to construct the LWD test channel is developed. The channel model had bed and banks moulded from 0·8 mm sand, and flow conditions were just below the threshold of motion so that any sediment transport and channel adjustment were the result of the debris element. Dimensions and positions of LWD elements were determined using a debris jam classification model. Elements were attached to a dynamometer to measure element drag forces, and channel adjustment was determined through detailed topographic surveys. The fluid drag force on the elements decreased asymptotically over time as the channel boundary eroded around the elements due to locally increased boundary shear stress. Total time for geomorphic adjustment computed for the prototype channel at the Q₂ discharge (discharge occurring once every two years on average) was as short as 45 hours. The size, depth and position of scour holes, bank erosion and bars created by flow acceleration past the elements were found to be related to element length and position within the channel cross‐section. Morphologies created by each debris element in the model channel were comparable with similar jams observed in the prototype channel. Published in 2001 John Wiley & Sons, Ltd.  相似文献   

Quantification of mineral matter in the Argonne Premium Coals using interactive Rietveld-based X-ray diffraction     

Colin R. Ward  John C. Taylor  C. E. Matulis  L. S. Dale 《International Journal of Coal Geology》2001,46(2-4)

The mineral matter in the eight reference North American coal samples of the Argonne Premium Coal series has been investigated on a quantitative basis using X-ray diffraction (XRD) techniques. X-ray diffraction data obtained from electronic low-temperature (oxygen–plasma) ash (LTA) residues, from ashes produced by heating the coals in air at 370°C, and also from the raw coals themselves, were evaluated using an interactive data processing system ( ™) based on Rietveld interpretation methods. The results from the three types of material (LTA, 370°C ash and raw coal) were compared for each sample. This allowed the components present in the raw coals in crystalline form to be recognised separately from mineral artifacts produced, particularly in the low-rank coals, from interaction of organically associated elements (Ca, S, etc.) during the two ashing processes.After the allowance for the production of any artifacts, the quantitative mineral assemblages identified from XRD of the raw coals were found to be consistent, even for coals having a relatively low ash percentage (around 5%), with the results obtained from the respective mineral concentrates prepared by the ashing methods. The effects of heating the coal to 370°C could also be distinguished, relative to the raw coal or the LTA, through changes in components such as pyrite and the clay minerals.Although some areas of uncertainty exist, particularly with magnesium in the low-rank coals, the calculated chemical compositions of the coal ash derived from the mineral mixtures identified for each coal were also found to be consistent with the results of direct chemical analysis of the respective coal ash materials.  相似文献