排序方式： 共有28条查询结果，搜索用时 140 毫秒
11.
Three‐dimensional seismic survey design should provide an acquisition geometry that enables imaging and amplitude‐versus‐offset applications of target reflectors with sufficient data quality under given economical and operational constraints. However, in land or shallow‐water environments, surface waves are often dominant in the seismic data. The effectiveness of surface‐wave separation or attenuation significantly affects the quality of the final result. Therefore, the need for surface‐wave attenuation imposes additional constraints on the acquisition geometry. Recently, we have proposed a method for surface‐wave attenuation that can better deal with aliased seismic data than classic methods such as slowness/velocity‐based filtering. Here, we investigate how surface‐wave attenuation affects the selection of survey parameters and the resulting data quality. To quantify the latter, we introduce a measure that represents the estimated signal‐to‐noise ratio between the desired subsurface signal and the surface waves that are deemed to be noise. In a case study, we applied surface‐wave attenuation and signal‐to‐noise ratio estimation to several data sets with different survey parameters. The spatial sampling intervals of the basic subset are the survey parameters that affect the performance of surface‐wave attenuation methods the most. Finer spatial sampling will reduce aliasing and make surface‐wave attenuation easier, resulting in better data quality until no further improvement is obtained. We observed this behaviour as a main trend that levels off at increasingly denser sampling. With our method, this trend curve lies at a considerably higher signal‐to‐noise ratio than with a classic filtering method. This means that we can obtain a much better data quality for given survey effort or the same data quality as with a conventional method at a lower cost. 相似文献
12.
The Huai Kham On gold deposit is located in the central part of the Sukhothai Fold Belt, northern Thailand. The Sukhothai Fold Belt represents an accretionary complex formed by subduction and collision between the Indochina and Sibumasu Terranes. There are many small gold deposits in the Sukhothai Fold Belt; however, the styles and formation environments of those gold deposits are not clear. The geology of the Huai Kham On deposit consists of volcanic and volcanosedimentary rocks, limestone, and low‐grade metamorphic rocks of Carboniferous to Triassic age. Gold‐bearing quartz veins are hosted by volcanic and volcanosedimentary rocks. The quartz veins can be divided into four stages. The mineral assemblage of the gold‐bearing quartz veins of Stages I and II comprises quartz, calcite, illite, pyrite, native gold, galena, chalcopyrite, and sphalerite. Quartz veins of Stage III consist of microcrystalline quartz, dolomite, calcite, pyrite, native gold, and chalcopyrite. Veins of Stage IV consist of calcite, dolomite, chlorite, and quartz. Fluid inclusions in quartz veins are classified into liquid‐rich two‐phase (Types IA and IB), carbonic‐aqueous (Type II), and carbonic (Type III) fluid inclusions. The homogenization temperatures of Types IA and II fluid inclusions that are related to the gold‐bearing quartz veins from Stages I to III ranged from 240° to 280°C. The δ18O values of quartz veins of Stages I to III range from +12.9 to +13.4‰, suggesting the presence of a homogeneous hydrothermal solution without temperature variation such as a decrease of temperature during the formation of gold‐bearing quartz veins from Stages I to III in the Huai Kham On gold deposit. Based on the calculated formation temperature of 280°C, the δ18O values of the hydrothermal solution that formed the gold‐bearing quartz veins range from +3.2 to +3.7‰, which falls into the range of metamorphic waters. The gold‐bearing quartz veins of the Huai Kham On deposit are interpreted to be the products of metamorphic water. 相似文献
13.
Jingwen Mao Jiandong Zhang Franco Pirajno Daizo Ishiyama Huimin Su Chunli Guo Yuchuan Chen 《Ore Geology Reviews》2011,43(1):203-216
Based on previous studies and detailed field investigations of the Dexing porphyry copper deposit, the Yinshan Ag-Pb-Zn deposit and the Jinshan shear zone – hosted gold deposit in the Dele Jurassic volcanic basin, in the northeastern Jiangxi province, East China, we propose that the three deposits share spatial, temporal and genetic relationships and belong to the same metallogenic system. Dexing is a typical porphyry Cu–Au–Mo deposit in which both ore-forming fluid and metals are derived from the granite porphyry. The Yinshan deposit consists of a porphyry copper ore located in the cupola of a quartz porphyry stock, in the lower part, and Ag–Pb–Zn ore veins in the upper part. The hydrothermal fluids were mainly derived from the magma in the early stages of the mineralizing event and became mixed with meteoric waters in the late stages. Its ore metals are magma-derived. Both the Jinshan base metal veins and the Hamashi, Dongjie and Naikeng quartz vein-type gold deposit are hosted by brittle–ductile structures, which are distal in relation to the porphyry intrusions and were formed by mixed magmatic fluids and meteoric water, whereas the gold was mainly leached from the country rocks (Mesoproterozoic Shuangqiaoshan Group phyllite and schist). The deposits show a distinct spatial arrangement from porphyry Cu, to epithermal Ag–Pb–Zn and distal Au. We suggest a porphyry–epithermal–distal vein ore system model for this group of genetically related mineral deposits. They were formed in a back-arc setting in a Middle Jurassic active continental margin, with magmas derived from the subducted slab. 相似文献
14.
Kaul Gena Hitoshi Chiba Katsuo Kase Kazuo Nakashima Daizo Ishiyama 《Resource Geology》2013,63(4):360-370
A sulfide chimney ore sampled from the flank of the active Tiger vent area in the Yonaguni Knoll IV hydrothermal field, south Okinawa trough, consists of anhydrite, pyrite, sphalerite, galena, chalcopyrite and bismuthinite. Electron microprobe analysis indicates that the chalcopyrite contains up to 2.4 wt% Sn, whereas bismuthinite contains up to 1.7 wt% Pt, 0.8 wt% Cu and 0.5 wt% Fe. The Sn‐rich chalcopyrite and Pt–Cu–Fe‐bearing bismuthinite are the first reported occurrence of such minerals in an active submarine hydrothermal system. The results confirm that Sn enters the chalcopyrite as a solid solution towards stannite by the coupled substitution of Sn4+Fe2+ for Fe3+Fe3+, whereas Pt, Cu and Fe enter the bismuthinite structure as a solid solution during rapid nucleation. The fluid inclusions homogenization temperatures in anhydrite (220–310°C) and measured end‐member temperature of the vent fluids on‐site (325°C) indicate that Sn‐bearing chalcopyrite and Pt–Cu–Fe‐bearing bismuthinite express the original composition of the minerals that precipitated as metastable phases at a temperature above 300°C. The result observed in this study implies that sulfides in ancient volcanogenic massive sulfide deposits have similar trace element distribution during nucleation but it is remobilised during diagenesis, metamorphism or supergene enrichment processes. 相似文献
15.
Yuji Ishiyama 《地震工程与结构动力学》1982,10(5):635-650
This investigation deals with motions of rigid bodies on a rigid floor subjected to earthquake excitations, and criteria for overturning of the bodies. In order to study any motions of a body in a plane, the motions are classified into six types, i.e. (1) rest, (2) slide, (3) rotation, (4) slide rotation, (5) translation jump and (6) rotation jump. Then, the following are studied: the equations of motion, transitions of motion, and motions after impact between the body and the floor. One of the features of this investigation is the introduction of the tangent restitution coefficient which enables us to estimate the magnitude of the tangent impulse at the instant of impact. A computer program was developed to simulate the motions of bodies subjected to horizontal and vertical ground motions, numerically solving the non-linear equations of motion. Several types of simulation were carried out and the following conclusions were found. The coefficient of friction must be greater than the breadth—height-ratio in order for the body to rock. The motions after impact from translation jump are greatly influenced by the normal and tangent restitution coefficients. As criteria for overturning of bodies, at least two factors must be taken into account: the horizontal acceleration and the velocity of the floor. Then it is possible to estimate the motions of the floor from the overturning of bodies in a more reliable manner than before. 相似文献
16.
Yasumasa Ogawa Daizo Ishiyama Naotatsu Shikazono Koichi Suto Chihiro Inoue Noriyoshi Tsuchiya Bernhardt Saini-Eidukat Scott A. Wood 《Aquatic Geochemistry》2018,24(1):5-25
This work assessed both the fractionation and the seasonal mobility variations of Ga and In in systems impacted by acidic thermal waters. This was accomplished by performing thermodynamic calculations using the PHREEQC algorithm and by assessing the activity of acidophilic iron-oxidizing bacteria. The pH of the Kusatsu thermal waters in Gunma Prefecture, central Japan, is rapidly increased following the addition of a lime suspension. After an abrupt pH increase, under which conditions free ions of Ga and In and their complexes with Cl? and SO42? exist only in negligible quantities, the majority of dissolved Ga and In is removed by sorption onto suspended hydrous ferric oxides (HFOs). These HFOs are then transported to an artificial lake without significant sedimentation along the river. Subsequently, the suspended HFOs settle out and are added to sediments without significant fractionation between Ga and In. The Tamagawa thermal waters in Akita Prefecture, northeast Japan, are also treated with lime. However, complete neutralization requires mixing with some tributary streams, leading to a gradual downstream increase in pH. Dissolved Ga is, in general, sorbed by HFOs in upstream areas, leading to wide dispersal of Ga across the entire watershed. In comparison, In is transported to the lake inlet predominantly as a Cl? complex species without significant removal along the river, with the majority being precipitated in an artificial lake, where Cl? concentrations are too low to form stable complex species with In, and thus, dissolved In is sorbed by HFOs. As a result, In is effectively concentrated within downstream lakebed sediments, whereas Ga is dispersed along the river. Seasonal variations in Ga mobility within the Tamagawa field between snowmelt and low-flow seasons are primarily controlled by pH, because hydrolysis reactions of these metals, which are related to sorption reactions, tend to occur in the upstream regions in the snowmelt season. However, under warmer conditions, HFO formation preferably occurs due to the activity of acidophilic iron-oxidizing bacteria. Thus, under similar pH variations, dissolved Ga is more effectively removed by HFOs during warmer seasons. On the contrary, because HFOs are abundantly formed in low-flow season, even under colder conditions, before In hydrolysis reaction starts to occur, In mobility is less affected by water temperature and then bacterial activity. 相似文献
17.
Mohammad Reza Ghodsi Mohammad Boomeri Sasan Bagheri David Lentz Daizo Ishiyama 《Resource Geology》2016,66(3):286-302
The Mesozoic Bazman granitoids are located in Sistan and Baluchestan province, southeastern Iran. Geology of the study area consists of Carboniferous shale, sandstone, and limestone and Permian siltstone, shale, sandstone, limestone, and dolomite that were intruded by the Bazman granitoids. These granitoids include various phases of granite, granodiorite, quartz‐monzodiorite, monzodiorite, diorite, and gabbro. They are metaluminous to slightly peraluminous, reduced, calc‐alkaline and I‐type, and display geochemical characteristics of continental margin (ensialic) granitoids. In this paper, field, petrography, and geochemical data were used to discriminate the Bazman granitoids either as productive or barren granitoids. Although there are a few skarn‐related mineral occurrences adjacent to the Bazman granitoids, most exposed intrusions are not hydrothermally altered and mineralized. Rb/Sr, Zr/Hf, and K/Rb ratios indicate that the granitic magmas that formed most of the Bazman granitoids indicate that they are moderately evolved and have generally not undergone post‐magmatic hydrothermal activity. The Sm/Eu and Rb/Ba ratios and the concentrations of Rb, Ba, and Sr within the aforementioned granitoids show that the rocks are similar to the averages of granitoids devoid of Li, Be, U, Sn, W, and Ta deposits. The I‐type arc characteristics and other geochemical features of the Bazman granitoids show that they are not typical of parental magmas to Sn, W, Mo, and Zn mineralization, but are mainly fertile for Cu and Fe (Au) skarn‐related granitoids. 相似文献
18.
Shotaro Nakayama Gerrit Blacquière Tomohide Ishiyama Satoshi Ishikawa 《Geophysical Prospecting》2019,67(6):1498-1521
The application of blended acquisition has drawn considerable attention owing to its ability to improve the operational efficiency as well as the data quality and health, safety and environment performance. Furthermore, the acquisition of less data contributes to the business aspect, while the desired data density is still realizable via subsequent data reconstruction. The use of fewer detectors and sources also minimizes operational risks in the field. Therefore, a combined implementation of these technologies potentially enhances the value of a seismic survey further. One way to encourage this is to minimize any imperfection in deblending and data reconstruction during processing. In addition, one may derive survey parameters that enable a further improvement in these processes as introduced in this study. The proposed survey design workflow iteratively performs the following steps to derive the survey parameters responsible for source blending as well as the spatial sampling of detectors and sources. The first step is the application of blending and sampling operators to unblended and well-sampled data. We then apply closed-loop deblending and data reconstruction. The residue for a given design from this step is evaluated and subsequently used by genetic algorithms to simultaneously update the survey parameters related to both blending and spatial sampling. The updated parameters are fed into the next iteration until they satisfy the given termination criteria. We also propose a repeated encoding sequence to form a parameter sequence in genetic algorithms, making the size of problem space manageable. The results of the proposed workflow are outlined using blended dispersed source array data incorporating different scenarios that represent acquisition in marine, transition zone and land environments. Clear differences attributed solely to the parameter design are easily recognizable. Additionally, a comparison among different optimization schemes illustrates the ability of genetic algorithms along with a repeated encoding sequence to find better solutions within a computationally affordable time. The optimized parameters yield a notable enhancement in the deblending and data reconstruction quality and consequently provide optimal acquisition scenarios. 相似文献
19.
Kofi Adomako‐Ansah Toshio Mizuta Napoleon Q. Hammond Daizo Ishiyama Takeyuki Ogata Hitoshi Chiba 《Resource Geology》2013,63(2):119-140
The Blue Dot gold deposit, located in the Archean Amalia greenstone belt of South Africa, is hosted in an oxide (± carbonate) facies banded iron formation (BIF). It consists of three stratabound orebodies; Goudplaats, Abelskop, and Bothmasrust. The orebodies are flanked by quartz‐chlorite‐ferroan dolomite‐albite schist in the hanging wall and mafic (volcanic) schists in the footwall. Alteration minerals associated with the main hydrothermal stage in the BIF are dominated by quartz, ankerite‐dolomite series, siderite, chlorite, muscovite, sericite, hematite, pyrite, and minor amounts of chalcopyrite and arsenopyrite. This study investigates the characteristics of gold mineralization in the Amalia BIF based on ore textures, mineral‐chemical data and sulfur isotope analysis. Gold mineralization of the Blue Dot deposit is associated with quartz‐carbonate veins that crosscut the BIF layering. In contrast to previous works, petrographic evidence suggests that the gold mineralization is not solely attributed to replacement reactions between ore fluid and the magnetite or hematite in the host BIF because coarse hydrothermal pyrite grains do not show mutual replacement textures of the oxide minerals. Rather, the parallel‐bedded and generally chert‐hosted pyrites are in sharp contact with re‐crystallized euhedral to subhedral magnetite ± hematite grains, and the nature of their coexistence suggests that pyrite (and gold) precipitation was contemporaneous with magnetite–hematite re‐crystallization. The Fe/(Fe+Mg) ratio of the dolomite–ankerite series and chlorite decreased from veins through mineralized BIF and non‐mineralized BIF, in contrast to most Archean BIF‐hosted gold deposits. This is interpreted to be due to the effect of a high sulfur activity and increase in fO2 in a H2S‐dominant fluid during progressive fluid‐rock interaction. High sulfur activity of the hydrothermal fluid fixed pyrite in the BIF by consuming Fe2+ released into the chert layers and leaving the co‐precipitating carbonates and chlorites with less available ferrous iron content. Alternatively, the occurrence of hematite in the alteration assemblage of the host BIF caused a structural limitation in the assignment of Fe3+ in chlorite which favored the incorporation of magnesium (rather than ferric iron) in chlorite under increasing fO2 conditions, and is consistent with deposits hosted in hematite‐bearing rocks. The combined effects of reduction in sulfur contents due to sulfide precipitation and increasing fO2 during progressive fluid‐rock interactions are likely to be the principal factors to have caused gold deposition. Arsenopyrite–pyrite geothermometry indicated a temperature range of 300–350°C for the associated gold mineralization. The estimated δ34SΣS (= +1.8 to +2.5‰) and low base metal contents of the sulfide ore mineralogy are consistent with sulfides that have been sourced from magma or derived by the dissolution of magmatic sulfides from volcanic rocks during fluid migration. 相似文献
20.
Abstract: The Onsen acid‐sulphate type of mineralization is located in the Desmos caldera, Manus back‐arc basin. Hydrothermal precipitates, fresh and altered basaltic andesite collected from the Desmos caldera were studied to determine mineralization and mobility of elements under seawater dominated condition of hydrothermal alteration. The mineralization is characterized by three stages of advanced argillic alteration. Alteration stage I is characterized by coarse subhedral pyrophyllite with disseminated anhedral pyrite and enargite which were formed in the temperature range of 260–340°C. Alteration stage II which overprinted alteration stage I was formed in the temperature range of 270–310°C and is characterized by euhedral pyrite, quartz, natroalunite, cristobalite and mixed layer minerals of smectite and mica with 14–15 Å XRD peak. Alteration stage III is characterized by amorphous silica, native sulphur, covellite, marcasite and euhedral pyrite, which has overprinted alteration stages I and II. Relative to the fresh basaltic andesite samples, the rims and cores of the partly altered basaltic andesite samples have very low major, minor and rare earth elements content except for SiO2 which is much higher (58–78 wt%) than SiO2 content of the fresh basaltic andesite (55 wt%). REE patterns of the partly altered basaltic andesite specimens are variably depleted in LREE and have pronounced negative Eu anomalies. Normalization of major, minor and REE content of the partly altered basaltic andesites to the fresh basaltic andesite indicates that all the elements except for SiO2 in the partly altered basaltic andesite are strongly lost (e.g. Al2O3 = ‐8.3 to ‐10.9 g/100cm3, Ba = ‐2.2 to ‐5.6 mg/100cm3, La = ‐130 to ‐200 μg/100cm3) during the alteration process. Abnormal depletion of MgO, total Fe as Fe2O3, LREE especially Eu and enrichment of SiO2 in the altered basaltic andesites from the Desmos caldera seafloor is caused by interaction of hot acidic hydrothermal fluid, which originates from a mixing of magmatic fluid and seawater. 相似文献