Channelized and hillslope sediment transport and the geomorphology of mountain belts     

Heinz Schneider  Marco Schwab  Fritz Schlunegger 《International Journal of Earth Sciences》2008,97(1):179-192

This paper uses the results of landscape evolution models and morphometric data from the Andes of northern Peru and the eastern Swiss Alps to illustrate how the ratio between sediment transport on hillslopes and in channels influences landscape and channel network morphologies and dynamics. The headwaters of fluvial- and debris-flow-dominated systems (channelized processes) are characterized by rough, high-relief, highly incised surfaces which contain a dense and hence a closely spaced channel network. Also, these systems tend to respond rapidly to modifications in external forcing (e.g., rock uplift and/or precipitation). This is the case because the high channel density results in a high bulk diffusivity. In contrast, headwaters where landsliding is an important sediment source are characterized by a low channel density and by rather straight and unstable channels. In addition, the topographies are generally smooth. The low channel density then results in a relatively low bulk diffusivity. As a consequence, response times are greater in headwaters of landslide-dominated systems than in highly dissected drainages. The Peruvian and Swiss case studies show how regional differences in climate and the litho-tectonic architecture potentially exert contrasting controls on the relative importance of channelized versus hillslope processes and thus on the overall geomorphometry. Specifically, the Peruvian example illustrates to what extent the storminess of climate has influenced production and transport of sediment on hillslopes and in channels, and how these differences are seen in the morphometry of the landscape. The Swiss example shows how the bedding orientation of the bedrock drives channelized and hillslope processes to contrasting extents, and how these differences are mirrored in the landscape. An erratum to this article can be found at  相似文献   

Recommended Values of ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu Concentrations in Reference Material IAEA-315 (Marine Sediment) Estimated by Thermal Ionisation Mass Spectrometry, Inductively Coupled Plasma-Mass Spectrometry and Alpha Spectrometry     

Taeko Shinonaga  Helmuth Aigner  Dilani Klose  Peter Spinder  Heinz Fröschl  David Donohue 《Geostandards and Geoanalytical Research》2008,32(1):93-101

The recommended concentrations of ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu in reference material IAEA‐315 (marine sediment) were estimated by three analytical methods: isotope dilution thermal ionisation mass spectrometry (TIMS), isotope dilution inductively coupled plasma‐mass spectrometry (ICP‐MS) and alpha spectrometry. The determination of ²³⁹Pu and ²⁴⁰Pu (^239+240Pu by alpha spectrometry) was carried out with samples from randomly selected bottles using each method. Plutonium‐238 was also measured by alpha spectrometry. A plutonium‐242 reference material was used as a spike for the quantitative analysis. The influence of ²⁴²Pu in the samples was therefore calculated; however, this contribution was less than the range of uncertainty and did not influence the final results. The obtained data were statistically analysed using variance component analysis and paired comparison. The combined standard uncertainties from “method/measurement”, “bottle” and “sub‐sample” were in the order of 3 to 6%. The main contributions to the uncertainty were from the material heterogeneity and from systematic differences between methods. Based on this study with twenty‐seven analyses using 10–14 g sample mass, concentrations of (38 ± 3) Bq kg^?1, (28 ± 3) Bq kg^?1 and (66 ± 4) Bq kg^?1 are proposed as recommended values for ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu, respectively, and (9.5 ± 0.4) Bq kg^?1 for ²³⁸Pu as an information value in reference material IAEA‐315. In mass concentration units, these amount to (16.4 ± 1.2) ng kg^?1, (3.3 ± 0.4) ng kg^?1 and (0.015 ± 0.003) ng kg^?1 for ²³⁹Pu, ²⁴⁰Pu and ²³⁸Pu, respectively. The certified reference materials NIST 4350B and NIST 4354 were also analysed by TIMS for quality assurance of the method used in this study.  相似文献   

Particle size distribution and dissolution properties of metals in cyclone fly ash   总被引：1，自引：0，他引：1  

H. Rönkkömäki Ph.D.  R. Pöykiö Ph.D.  H. Nurmesniemi Ph.D.  K. Popov D.Sc.  E. Merisalu Dr.  T. Tuomi PhD  I. Välimäki M.Sc. 《International Journal of Environmental Science and Technology》2008,5(4):485-494

The particles in the examined cyclone fly ash were all smaller than 0.25 mm. in diameter, and particles smaller than 0.075 mm. in diameter accounted for 88.4 % of the ash weight. This result indicates that cyclone fly ash consists of particles with a small diameter. The metals in the cyclone fly ash were enriched in small particles. The highest concentrations for zinc, copper, lead, cadmium and molybdenum in the cyclone fly ash were found in the smallest particle size fraction (< 0.075 mm.) and for Barium, chromium, nickel, Vanadium and Cobalt in the second to smallest particle size fraction (0.075-0.125 mm.). From an environmental and toxicological standpoint, the smallest particles are of the greatest concern when ash is handed at landfill disposal sites (transport and disposal especially in stormy weather conditions), and some studies have reported risks to workers from prolonged exposure to ash. The results of the comparison of various dissolution methods for metals showed that the digestion procedures with nitric acid alone (USEPA 3051) or with a mixture of nitric acid + hydrogen peroxide (USEPA 3050B) slightly underestimated the metal concentrations in the cyclone fly ash. Although the use of hydrofluoric acid is often necessary for the determination of a number of elements associated with siliceous minerals, its use can result in loss of trace elements during dissolution.  相似文献   

Total ozone variations in the tropical belt: An application for quality of ground based measurements     

Dr R. D. Bojkov  V. E. Fioletov 《Meteorology and Atmospheric Physics》1996,58(1-4):223-240

Summary The study of the regime of ozone variations in the huge tropical belt (25° S to 25° N), which are, in general, very small and zonally nearly symmetric, permits to establish a statistical model for estimating the ozone deviations using Total Ozone Mapping Spectrometer (TOMS) data. The equatorial stratospheric winds at 25 and 50hPa and the solar flux at 10.7 cm are used as major predictors and the linear trend was also estimated. The 10m/sec stratospheric wind change is related to1.2% ozone change at the equator, to practically no change in the 8–15° belts and up to 1.4% change with opposite phase over the tropics in spring but nearly zero change in fall. The solar cycle related amplitude is about 1.4% per 100 units of 10.7 cm solar flux. The ozone trends are negative: not significant over the equator and about –2% per decade (significant at 95% level) over the tropics. The latter could have been enforced by the 2 to 4% lower ozone values during 1991–1993, part of which might be related to the effects of the Mt. Pinatubo eruption, but might also be due to the strong QBO. The estimated deviations are verified versus reliable observations and the very good agreement permits applying the model for quantitative quality control of the reported ozone data from previous years. The standard deviation of the difference between observed ozone deviations and those estimated from the model is only 0.9–1.6% for yearly mean, that means instruments used for total ozone observations in the tropical belt should have systematic error of less than 1%. Cases when the discrepancies between the model and reported observations at a given station exceed 2–3% for time interval of 2 or more years should be verified.With 17 Figures  相似文献   

Use of precipitation data for diabatic initialization to improve the tropical analysis of divergence and moisture     

Dr. A. Kasahara  Dr. A. P. Mizzi 《Meteorology and Atmospheric Physics》1996,60(1-3):143-156

Summary First, we review the present status of diabatic initialization used for numerical weather prediction and conclude that the deficiency of diabatic initialization mostly stems from the shortcoming in evaluating diabatic heating rates accurately, particularly the release of latent heat by cumulus convection. This indicates the need to adjust the initial conditions for physical processes, and Krishnamurti and his colleagues introduced in 1984 the concept of physical initialization. Since cumulus convection is most sensitive to input data among many physical processes, the adjustment of atmospheric input data to a prediction model to produce desired initial precipitation rates is referred to as cumulus initialization.In this article we describe a general approach to diabatic initialization with a special emphasis on cumulus initialization. We present the results of forecasting experiments with a version of the NCAR Community Climate Model (CCM) to demonstrate the efficacy of a cumulus initialization procedure to ameliorate the spinup problern of precipitation. Finally, we discuss application of the present methodology of cumulus initialization for a stability-dependent mass-flux cumulus parameterization of CCM2 to pave the way to complete the diabatic normal mode initialization package for CCM2. Note that the present cumulus initialization scheme can be used to assimilate into the atmospheric analysis of the tropics the precipitation rates estimated by satellite radiometric imagery data.With 8 FiguresThe National Center for Atmospheric Research is sponsored by the National Science Foundation  相似文献   

Rupture process of large earthquakes in the northern Mexico subduction zone     

Larry J. Ruff  Angus D. Miller 《Pure and Applied Geophysics》1994,142(1):101-172

The Cocos plate subducts beneath North America at the Mexico trench. The northernmost segment of this trench, between the Orozco and Rivera fracture zones, has ruptured in a sequence of five large earthquakes from 1973 to 1985; the Jan. 30, 1973 Colima event (M _s 7.5) at the northern end of the segment near Rivera fracture zone; the Mar. 14, 1979 Petatlan event (M _s 7.6) at the southern end of the segment on the Orozco fracture zone; the Oct. 25, 1981 Playa Azul event (M _s 7.3) in the middle of the Michoacan gap; the Sept. 19, 1985 Michoacan mainshock (M _s 8.1); and the Sept. 21, 1985 Michoacan aftershock (M _s 7.6) that reruptured part of the Petatlan zone. Body wave inversion for the rupture process of these earthquakes finds the best: earthquake depth; focal mechanism; overall source time function; and seismic moment, for each earthquake. In addition, we have determined spatial concentrations of seismic moment release for the Colima earthquake, and the Michoacan mainshock and aftershock. These spatial concentrations of slip are interpreted as asperities; and the resultant asperity distribution for Mexico is compared to other subduction zones. The body wave inversion technique also determines theMoment Tensor Rate Functions; but there is no evidence for statistically significant changes in the moment tensor during rupture for any of the five earthquakes. An appendix describes theMoment Tensor Rate Functions methodology in detail.The systematic bias between global and regional determinations of epicentral locations in Mexico must be resolved to enable plotting of asperities with aftershocks and geographic features. We have spatially shifted all of our results to regional determinations of epicenters. The best point source depths for the five earthquakes are all above 30 km, consistent with the idea that the down-dip edge of the seismogenic plate interface in Mexico is shallow compared to other subduction zones. Consideration of uncertainties in the focal mechanisms allows us to state that all five earthquakes occurred on fault planes with the same strike (N65°W to N70°W) and dip (15±3°), except for the smaller Playa Azul event at the down-dip edge which has a steeper dip angle of 20 to 25°. However, the Petatlan earthquake does prefer a fault plane that is rotated to a more east-west orientation—one explanation may be that this earthquake is located near the crest of the subducting Orozco fracture zone. The slip vectors of all five earthquakes are similar and generally consistent with the NUVEL-predicted Cocos-North America convergence direction of N33°E for this segment. The most important deviation is the more northerly slip direction for the Petatlan earthquake. Also, the slip vectors from the Harvard CMT solutions for large and small events in this segment prefer an overall convergence direction of about N20°E to N25°E.All five earthquakes share a common feature in the rupture process: each earthquake has a small initial precursory arrival followed by a large pulse of moment release with a distinct onset. The delay time varies from 4 s for the Playa Azul event to 8 s for the Colima event. While there is some evidence of spatial concentration of moment release for each event, our overall asperity distribution for the northern Mexico segment consists of one clear asperity, in the epicentral region of the 1973 Colima earthquake, and then a scattering of diffuse and overlapping regions of high moment release for the remainder of the segment. This character is directly displayed in the overlapping of rupture zones between the 1979 Petatlan event and the 1985 Michoacan aftershock. This character of the asperity distribution is in contrast to the widely spaced distinct asperities in the northern Japan-Kuriles Islands subduction zone, but is somewhat similar to the asperity distributions found in the central Peru and Santa Cruz Islands subduction zones. Subduction of the Orozco fracture zone may strongly affect the seismogenic character as the overlapping rupture zones are located on the crest of the subducted fracture zone. There is also a distinct change in the physiography of the upper plate that coincides with the subducting fracture zone, and the Guerrero seismic gap to the south of the Petatlan earthquake is in the wake of the Orozco fracture zone. At the northern end, the Rivera fracture zone in the subducting plate and the Colima graben in the upper plate coincide with the northernmost extent of the Colima rupture zone.  相似文献   

Bayes estimation: A novel approach to derivation of internally consistent thermodynamic data for minerals,their uncertainties,and correlations. Part II: Application     

Niranjan D. Chatterjee  Klaus Miller  Walter Olbricht 《Physics and Chemistry of Minerals》1994,21(1-2):50-62

Internally consistent thermodynamic data, including their uncertainties and correlations, are reported for 22 phases of the quaternary system CaO-Al₂O₃-SiO₂-H₂O. These data have been derived by simultaneous evaluation of the appropriate phase properties (PP) and reaction properties (RP) by the novel technique of Bayes estimation (BE). The thermodynamic model used and the theory of BE was expounded in Part I of this paper. Part II is the follow-up study illustrating an application of BE. The input for BE comprised, among others, the a priori values for standard enthalpy of formation of the i-th phase, Δ_f H _i ⁰ , and its standard entropy, S _i ⁰ , in addition to the reaction reversal constraints for 33 equilibria involving the relevant phases. A total of 269 RP restrictions have been processed, of which 107 turned out to be non-redundant. The refined values for Δ_f H _i ⁰ and S _i ⁰ obtained by BE, including their 2σ-uncertainties, appear in Table 4; the Appendix reproduces the corresponding correlation matrix. These data permit generation of computed phase diagrams with 2σ-uncertainty envelopes based on conventional error propagation; Fig. 3 depicts such a phase diagram for the system CaO-Al₂O₃-SiO₂. It shows that the refined dataset is capable of yielding phase diagrams with uncertainty envelopes narrow enough to be geologically useful. The results in Table 4 demonstrate that the uncertainties of the prior values for Δ_f H _i ^Emphasis>0 , given in Table 1, have decreased by up to an order of magnitude, while those for S _i ⁰ improved by a factor of up to two. For comparison, Table 4 also lists the refined Δ_f H _i ⁰ and S _i ⁰ data obtained by mathematical programming (MAP), minimizing a quadratic objective function used earlier by Berman (1988). Examples of calculated phase diagrams are given to demonstrate the advantages of BE for deriving internally consistent thermodynamic data. Although P-T curves generated from both MAP and BE databases will pass through the reversal restrictions, BE datasets appear to be better suited for extrapolations beyond the P-T range explored experimentally and for predicting equilibria not constrained by reversals.  相似文献   

Effects of water on strength and failure mode of coarse-grained granites at 300°C   总被引：1，自引：0，他引：1  

E. Althaus  A. Friz-Töpfer  Dr. rer. nat. Ch. Lempp  O. Natau 《Rock Mechanics and Rock Engineering》1994,27(1):1-21

Summary Deformation experiments have been performed in a triaxial compression cell at a temperature of 300°C and confining pressures up to 65 MPa using samples of homogeneous, fresh two-mica-granite (RM) and monzogranite (CM). The cylindrical specimens (d=70 mm, h=140 mm, V=540 cm³) were tested undrained under dry (105°C), as received, and water saturated conditions at deformation rates between and . The mechanical behaviour of the two types of coarse-grained, crystalloblastic granites is critically influenced by mineralogical composition, porosity, and the amount of intergranular water present in the samples. The failure stress of the CM granite is at about 65% of that of the RM granite; in both rocks strength decreases with increasing porosity and water content.The presence of interstitial water causes a failure mode of non-localized, homogeneously distributed microcracking in the central parts of the samples, whereas, in runs with dry granites, strain localization along a single shear fracture was observed. When aqueous fluids are present, the macroscopic style of deformation of granites appears to be ductile even at lowP andT conditions. Strength and angle of internal friction are reduced to very low values. The style of deformation, as well as the reduction of strength of the water-saturated rock samples, is due to mechanical and chemical effects of intergranular water at elevated temperatures.The maximum differential stresses measured for these coarse-grained granites are much lower than the strength commonly reported for other granites, e. g. Westerly and Charcoal granites. Our data suggest that the strength of the granitic crust under differential stress is lower than currently deduced from laboratory experiments.  相似文献   

Geochemistry and origin of the Proterozoic ultrapotassic rocks of the Churchill Province,Canada     

Dr. T. D. Peterson  Dr. S. Esperança  Dr. A. N. LeCheminant 《Mineralogy and Petrology》1994,51(2-4):251-276

Summary Early Proterozoic ultrapotassic dikes, lava flows, and pyroclastic rocks of the Christopher Island Formation (CIF) erupted throughout an area 600 × 300 km within the Churchill Province of the Canadian Shield at 1.84 Ga. The rocks range from mafic lamprophyres (mg # 60; SiO₂ 47–54%, mean K₂O/Na₂O > 4) with phenocrysts of phlogopite + diopside + apatite ± olivine ± magnetite, to phenocryst-poor felsic rocks and sanidine porphyries (SiO₂55–69%). All samples have high incompatible element contents and display large depletions of high field strength elements relative to K, Rb, Sr, Ba, and Th. The CIF has geochemical and petrographic characteristics of both minettes and lamproites, but overall most closely resembles young Mediterranean lamproites. Felsic rocks of the CIF were produced by crystal fractionation and crustal contamination of mafic ultrapotassic magma, and include both high-silica lamproites strongly enriched in Zr, U, and Th, and weakly potassic to sodic rocks of trachytic composition. Flows and feeder dikes have relatively homogeneous _{Nd, 1840 Ma} (–6 to –11) but highly variable ES., 1840 Ma (–40 to + 100); samples classified as lamproites have higher average _Sr. Dike samples have highly variable present-day Pb isotope compositions, ranging from moderately to strongly nonradiogenic. Geochemical and isotopic data are consistent with contributions from depleted Archean lithospheric mantle, and OIB-type convecting mantle, both metasomatized by subduction-related processes during the Early Proterozoic. The lithospheric mantle probably contained Archean enriched domains as well. Proterozoic enrichment may have accompanied shallow underplating of subducted oceanic lithosphere beneath the Churchill Province during amalgamation of the Laurentian supercontinent. There are strong analogies in isotopic composition, and interpreted source region history, between the CIF and lamproites and minettes of the Wyoming Province and western Greenland, which suggest the existence of a Laurentian ultrapotassic superprovince.

---

Geochemie und Entstehung der Proterozoischen ultrapotassischen Gesteine der Churchill Provinz, Kanada

Zusammenfassung Altproterozoische, ultrapotassische Gänge, Lavaströme und pyroklastische Gesteine der Christopher Island Formation (CIF), eruptierten in einem Gebiet von 600 × 300 km in der Churchill Provinz des Kanadischen Schildes vor 1.84 Ga. Die Zusammensetzung dieser Gesteine variiert von mafischen Lamprophyren (mg > 60; SiO₂ = 47–54%, durchschnittliches K₂O/Na₂O > 4) mit Phänokristallent von Phlogopit + Diopsid + Apatit + Olivin + Magnetit, bis zu phänokristallarmen felsischen Gesteinen und Sanidinporphyren (SiO₂ = 55–69%). Alle Proben zeigen hohe Gehalte an inkompatiblen Elementen und zeigen beträchtliche Verarmung an high field strength Elementen relativ zu K, Rb, Sr, Ba und Th. Die CIF hat geochemische und petrographische Eigenschaften sowohl von Minetten wie von Lamproiten, aber im allgemeinen ähnelt sie am stärksten jungen mediterranen Lamproiten. Felsische Gesteine der CIF wurden durch Fraktionierung und Krustenkontamination aus mafischen ultrapotassischen Magmen gebildet. Letztere umfassen sowohl siliziumreiche Lamproite, die deutlich an Zr, U und Th angereichert sind und schwach potassische bis sodische Gesteine von trachytischer Zusammensetzung. Lavenergüsse und zufuhrgänge zeigent ein relativ homogenes _{Nd, 1840 Ma} (–6 bis –11) aber ein sehr variables _{Sr, 1840 Ma} (-40 bis + 100); Proben die als Lamproite klassifiziert wurden, zeigent höhere durchschnittliche _Sr-Werte. Proben von Gängen haben sehr variable Bleiisotopen-Zusammensetzungen, die von mäßig bis stark nichtradiogen variieren. Geochemische und Isotopendaten weisen auf Beiträge aus verarmtem archaischen lithosphärischen Mantel und aus konvektierendem OIB-Typ Mantel hin, die beide während des Alproterozoikums durch Subduktions-Vorgänge metasomatisiert wurden. Der lithosphärische Mantel enthielt wahrscheinlich auch angereicherte archaische Domänen. Proterozoische Anreicherungsvorgänge dürften seichtes Underplating subduzierter ozeanischer Lithosphäre unter der Churchill Provinz während der Amalgamation des laurentischen Superkontinentes begleitet haben. Es gibt starke Analogien in der Isotopenzusammensetzung und in der interpretierten Geschichte der Ursprungsregion, zwischen den CIF und Lamproiten und Minetten der Wyoming Provinz, und des westlichen Grönland. Diese weisen auf die Existenz einer laurentischen ultrapotassischen Superprovinz hin.

---

---

With 7 Figures  相似文献   

Alkaline and ultramafic carbonate lamprophyres in Central Bohemian carboniferous basins,Czech Republic     

Dr. J. Ulrych  Dr. E. Pivec  Dr. K. Zák  Dr. J. Bendl  Dr. P. Bosák 《Mineralogy and Petrology》1993,48(1):65-81

Summary Dykes of alkaline and ultramafic carbonate lamprophyres (monchiquite-ouachitite and aillikite) intrude the Carboniferous sediments of Central Bohemia. Their characteristic feature is the presence of substantial amounts of a sodalite group mineral (presumably haüyne), carbonate and barite. Isotopic compositions of ¹³C (–3.4 to –6.2) and ¹⁸O ( + 13.5 to + 15.9) indicate that the carbonate is of primary magmatic origin and that fluids were formed at temperatures of 500 to 350°C. High contents of CO₂ (3.6 to 17.6 wt.%) and incompatible elements, high LREE/HREE ratios (30.0 to 57.7), and low Rb/Sr (0.025 to 0.078) and⁸⁷Sr/⁸⁶Sr (0.7038 to 0.7042) ratios suggest the ultramafic lamprophyres are related to deep-seated carbonated magmas of mantle origin. Low degree of partial melting ( < 1%) of the mantle peridotite is envisaged, with additional transport of fluids rich in incompatible elements into the crustal chamber. Alkaline lamprophyres are fractionated derivatives which originated from the same source. Magma intrusion from different levels of a magma chamber into fracture zones under horizontal tension without a central intrusion could result in variability in lamprophyre composition (cumulates or evolved derivatives).

---

Alkalische und ultramafische Karbonat-Lamprophyre der zentralen böhmischen Karbonbecken, Tschische Republik

Zusammenfassung Alkalische und ultramafische Karbonat-Lamprophyrgänge (Monchiquit-Ouachitit und Aillikit) intrudieren in karbonische Sedimente Zentralböhmens. Sie sind charakterisiert durch das Auftreten von beträchtlichen Mengen an Mineralen der Sodalith-Gruppe (v.a. Haüyn), Karbonaten und Baryt. Ihre Isotopenzusammensetzung von ¹³C (–3.4 bis –6.2) und ¹⁸O (13.5 bis 15.9) zeigt, daß die Karbonate primär magmatischen Ursprungs sind und daß assoziierte Fluide in einem Temperaturbereich von 350 bis 500°C gebildet wurden. Hohe Gehalte an CO₂ (3.6 bis 17.6 Gew. %), inkompatiblen Elementen, hohe LREE/HREE-Verhältnisse (30.0 bis 57.7), sowie niedrige Rb/Sr—(0.025 bis 0.078) und⁸⁷Sr/⁸⁶Sr-(0.7038 bis 0.7042) Verhältnisse lassen vermuten, daß die ultramafischen Lamprophyre mit karbonatischen Magmen des Mantels in Beziehung stehen. Eine niedrige Aufschmelzungsrate ( < 1%) von Mantelperidotit mit zusätzlichem Transport von, an inkompatiblen Elementen angereicherten Fluiden, in die krustale Magmenkammer wird diskutiert. Alkalische Lamprophyre sind als stärker fraktionierte Magmen, die derselben Quelle entstammen, zu verstehen. Die Intrusion der aus verschiedenen Bereichen der Magmenkammer stammenden Magmen in durch horizontale Dehnung verursachte Störungszonen könnte das Fehlen eines zentralen Intrusionskörpers und die unterschiedliche Zusammensetzung der Lamprophyre (Kumulate oder entwickelte Derivate) erklären.

---

---

With 8 Figures  相似文献