排序方式： 共有96条查询结果，搜索用时 15 毫秒
61.
A precise value of the matrix-fracture transfer shape factor is essential for modeling fluid flow in fractured porous media by a dual-porosity approach. The slightly compressible fluid shape factor has been widely investigated in the literature. In a recent study, we have developed a transfer function for flow of a compressible fluid using a constant fracture pressure boundary condition [Ranjbar E, Hassanzadeh H, Matrix-fracture transfer shape factor for modeling flow of a compressible fluid in dual-porosity media. Adv Water Res 2011;34(5):627-39. doi:10.1016/j.advwatres.2011.02.012]. However, for a compressible fluid, the consequence of a pressure depletion boundary condition on the shape factor has not been investigated in the previous studies. The main purpose of this paper is, therefore, to investigate the effect of the fracture pressure depletion regime on the shape factor for single-phase flow of a compressible fluid. In the current study, a model for evaluation of the shape factor is derived using solutions of a nonlinear diffusivity equation subject to different pressure depletion regimes. A combination of the heat integral method, the method of moments and Duhamel’s theorem is used to solve this nonlinear equation. The developed solution is validated by fine-grid numerical simulations. The presented model can recover the shape factor of slightly compressible fluids reported in the literature. This study demonstrates that in the case of a single-phase flow of compressible fluid, the shape factor is a function of the imposed boundary condition in the fracture and its variability with time. It is shown that such dependence can be described by an exponentially declining fracture pressure with different decline exponents. These findings improve our understanding of fluid flow in fractured porous media. 相似文献
62.
Negin Kananizadeh Taghi Ebadi Seyed Alireza Khoshniat Seyed Ehsan Mousavirizi 《洁净——土壤、空气、水》2011,39(7):605-611
This study evaluates the effect of nanoclay on permeability, swelling, compressive strength, and cation exchange capacity of a compacted Kahrizak landfill clay liner. The results show that 4% nanoclay significantly reduces permeability (3 × 10?9 to 7.74 × 10?11 cm/s in neutral, 3.66 × 10?9 to 7.9 × 10?10 cm/s in acidic, and 3.25 × 10?9 to 5.24 × 10?10 cm/s in alkaline condition), and increases compressive strength (by 36.28%) and the percentage of swelling (from 16.67 to 41.82, 23.33 to 45.45, and 15 to 38.18 at pH 7, 4.8, and 9, respectively) compare to raw clay samples. Moreover, the results of cation exchange capacity tests show that adding 4% nanoclay to the Kahrizak clay, permeated with landfill leachate, helps the sample maintain its mono‐valent ions between layers and remains dispersed. The results of SEM and XRD analyses show that by adding nanoclay, nanoclay clusters are formed in the sample; as a result, the interlayer spacing decreases which makes it remain dispersed. XRF analyses also demonstrate that by adding nanoclay to the mixture, the permeability and therefore, the amount of heavy metals which can penetrate into it decreases. The results justify the construction of clay barriers with nanoclay in order to prevent leachate penetration, and consequently reduce the operation costs. 相似文献
63.
A modification to the nonlinear Pastor–Zienkiewicz–Chan (PZC) constitutive model without any change in the number of model parameters is introduced in order to simulate stiffness degradation of dense sands at dynamic loading. The PZC model is based on generalized plasticity and was verified by good prediction of liquefaction and undrained behavior of saturated sand. The PZC is a robust model that can predict drained dynamic behavior of sands, especially stiffness increase in loose sand at reloading of dynamic loading. Yet, this model does not show stiffness degradation of dense sand at reloading. The modification is made through modifying the stress memory factor, H DM, which is multiplied by the plastic modulus, H L. This modification does not influence reloading behavior of loose sand. The modified PZC model is verified via results of drained cyclic tests. Two cyclic triaxial tests on loose and dense specimens, along with two cyclic plane strain tests on dense sand are utilized for validation. The model simulation shows that the modified PZC model is able to predict the stiffness degradation of dense sand at reloading well. 相似文献
64.
Acta Geotechnica - The growing rate of plastic waste generation is becoming a global concern due to the adverse impacts of plastics on the environment. Recycling and reusing plastic waste has been... 相似文献
65.
Moghadam Seyed Iman Taheri Ehsan Ahmadi Morteza Ghoreishian Amiri Seyed Ali 《Acta Geotechnica》2022,17(10):4359-4375
Acta Geotechnica - This paper presents a constitutive model enabled to simulate monotonic and cyclic behaviour of clay and sand in a unified framework. The bounding surface concept has been... 相似文献
66.
Perveiz Khalid Muhammad Irfan Ehsan Sohail Akram Zia Ud Din Shahid Ghazi 《Journal of the Geological Society of India》2018,92(4):465-470
The reservoir character of the Cretaceous sand is evaluated in Lower Indus Basin, Pakistan where water flooding is very common. Thus, prediction of subsurface structure, lithology and reservoir characterization is fundamental for a successful oil or gas discovery. Seismic reflective response is an important tool to detect sub-surface structure. Seismic reflection response is not enough to highlight geological boundaries and fluids in the pore space therefore, the use of integrated approach is vital to map sub-surface heterogeneities with high level of confidence. Based on seismic character and continuity of prominent reflectors four seismic horizons are marked on the seismic sections. All the strata is highly disturbed and distorted with presence of a network of fault bounded horst and graben structures, which indicate that the area was under compressional tectonic regime. These fault bounded geological structure formed structural traps favorable for the accumulation of hydrocarbon. The petrophysical analysis reveals that the Cretaceous sand formation has four types of sand: Sand A, B, C and D with good porosity (15 % average) and low volume of shale. Although complete petroleum system is present with structural traps and reservoir character of sand interval is very good but these sands are highly saturated with water thus are water flooded, which is the main reason of the abundant wells in the study area. 相似文献
67.
Using the Sagdeev pseudo-potential technique, further investigation on the effect of nonextensive hot electrons on finite amplitude nonlinear low-frequency electrostatic waves in a magnetized two-component plasma have been reported in detail. The plasma model consists of cold ions fluid and nonextensively distributed electrons. The existence domain for the nonlinear structures have been established analytically and numerically. Apart from the compressive and rarefactive soliton solutions that have been reported earlier, the present investigation shows that double layer structures can be obtained for certain values of nonextensive electrons in the supersonic Mach number regime. The present results may provide an explanation for the observed nonlinear structures in the auroral region of the Earth’s magnetosphere. 相似文献
68.
Support system suggestion based on back-analysis results case study: Babolak water conveyance tunnel
Ehsan Dadashi Kaveh Ahangari Ali Noorzad Alireza Arab 《Arabian Journal of Geosciences》2012,5(6):1297-1306
Determining in-situ soil or rock geotechnical properties is a difficult task for a design engineer. Back analysis is a helpful technique for evaluating soil property by considering and measuring the convergence of an underground opening. Back analysis was performed by matching numerical modeling results with the measured tunnel convergence. The main purpose of this study was to determine optimum rock mass properties using back analysis in order to suggest the best and most economical support system. Accordingly, the difference between measured and calculated convergence values was minimized by using an error function (objective function). In this paper, through the parameters obtained from back analysis, a support system based on a set consisting of shotcrete, wire mesh, and lattice girder was suggested for the Babolak water conveyance tunnel in Mazandaran, Iran. Therefore, the suggested design was based on decreasing shotcrete thickness from 25 to 20?cm and eliminating of rock bolts. 相似文献
69.
Matthieu J. Talpe R. Steven Nerem Ehsan Forootan Michael Schmidt Frank G. Lemoine Ellyn M. Enderlin Felix W. Landerer 《Journal of Geodesy》2017,91(11):1283-1298
We construct long-term time series of Greenland and Antarctic ice sheet mass change from satellite gravity measurements. A statistical reconstruction approach is developed based on a principal component analysis (PCA) to combine high-resolution spatial modes from the Gravity Recovery and Climate Experiment (GRACE) mission with the gravity information from conventional satellite tracking data. Uncertainties of this reconstruction are rigorously assessed; they include temporal limitations for short GRACE measurements, spatial limitations for the low-resolution conventional tracking data measurements, and limitations of the estimated statistical relationships between low- and high-degree potential coefficients reflected in the PCA modes. Trends of mass variations in Greenland and Antarctica are assessed against a number of previous studies. The resulting time series for Greenland show a higher rate of mass loss than other methods before 2000, while the Antarctic ice sheet appears heavily influenced by interannual variations. 相似文献
70.
Analysis of geological structure and anthropological factors affecting arsenic distribution in the Lahore aquifer,Pakistan 总被引：1，自引：0，他引：1
Akhtar Malik Muhammad Tang Zhonghua Zakari Sissou Bahaa Mohamadi Muhsan Ehsan 《Hydrogeology Journal》2016,24(7):1891-1904
This study investigated the potential factors affecting arsenic concentration in the groundwater system of Lahore, Pakistan. The effects of several factors such as population density (PD), pumping rate (PR), impermeable land use (LU), surface elevation (SE), and water-table elevation (WL) on arsenic concentration were studied in 101 union councils of Lahore. Forty single and multi-factor models were established using geographic information system (GIS) techniques to develop an arsenic contamination map and to investigate the most effective combinations among factors. Additionally, statistical tests were used to evaluate arsenic concentration between classes of the same single factor. The arsenic concentration in the Lahore aquifer varied from 0.001 to 0.143 mg L?1. The highest arsenic concentrations were detected in the Walled City and the town of Shahdara. Among the 40 raster models, groundwater arsenic concentration showed the best matching frequency with single-factor models for PD (50.70 %) and SE (47 %). Thus, PD and SE were used to develop an arsenic distribution raster map, and they were also used to study the effect of aquifer depth on arsenic concentration. PD was found to have hidden latent variables such as PR and LU. The shallow aquifer depth was negatively correlated with arsenic concentration (r?=??0.23) and positively with PR (r?=?0.15). Therefore, when there was high PR in wells with smaller aquifer depth, the arsenic concentration was high. The existing water treatment and alternative water resources are good options, which should be developed to deal with Lahore wells contaminated with arsenic at high concentrations. 相似文献