A grain-size correction for metal pollution indexes in river sediments     

Thomas Vincent Gloaguen  Paula Núbia Soares Dalto Motta  Carolina Fonseca Couto 《国际泥沙研究》2021,36(3):362-372

According to the List of Hazardous Substances of the Agency of the Toxic Substances and Disease Registry(ATSDR 2017),some metallic elements such as Pb or Cd are still considered as the most polluting elements in the world.These elements accumulate in sediments,and there are various methods available that differentiate lithogenic sources from anthropogenic sources.For that,the natural geochemical background is required,however,its definition is far from unanimous:it can be a global or local value,single or statistically estimated value,depending on the studies.Our study is focused on the Suba
e River in the state of Bahia,Northeastern Brazil,which was historically contaminated by lead metallurgy.The river sediments were sampled at 21 locations:one at the discharge point of the plant's rainwater basin,ten upstream,and ten downstream.The total contents of Fe,Ti,Mn,Pb,Zn,Cu,Cr,particle-size distribution,and organic matter were analyzed.The conventional geochemical indexes,i.e.,the pollution degree(mCd),pollution load index,and enrichment factor indicated contamination by Zn,Pb,Cr,and Cu.Then,a new enrichment factor is introduced,assuming that the sediments come from erosion of soils in the watershed.After obtaining the natural concentrations of metals in the clay,silt,and sand fractions of uncontaminated reference soils,we corrected the pollution indexes by calculating a new individual background in each sediment sample,according to its grain size distribution.This new approach provided more precise indexes in the assessment of sediment pollution,by highlighting higher contamination of Zn and Pb(around 50%)and at the same time the absence of Cr and Cu contamination,two metals not involved with the metallurgical activity.  相似文献   

Vapour source and spatiotemporal variation of precipitation isotopes in Southwest Spain     

Claus Kohfahl  Rolf Fonseca Rodríguez  Fernando Ruiz Bermudo  Iñaki Vadillo 《水文研究》2021,35(12):e14445

The δ²H and δ¹⁸O composition of 77 precipitation samples collected between January 2014 and April 2019 from two sites across the Guadalquivir Basin, SW Spain, were analysed. The first site is located in an urban area of Seville at 100 km distance to the Atlantic coast and the second site is located in a dune area of the Doñana National Park a few kilometres from the coast. Sampling was performed within intervals of at least 14 days if rain occurred but frequently intervals were longer according to the rainfall incidence. Samples from both sites are available for the period February 2016 to June 2018 with six samples containing identical rain events at both locations. Precipitation weighted averages and local meteoric water lines produced by weighting and non-weighting regression methods are presented for its use in hydrological applications. Results show a remarkably high variability in δ²H and δ¹⁸O values and precipitation weighted average d-excess values of 11.8‰ and 13‰ at the sites Plaza de España and Doñana, respectively. Temperature and amount effects were found to be weak. A significant influence of secondary evaporation for single rainfall events during summer was identified by enriched isotopic signatures with reduced d-excess values plotting close or below the global meteoric water line. Backward trajectory analysis of 115 days with daily rainfall above 3 mm yield a predominant Atlantic Ocean vapour source with negligible Mediterranean influence and therefore, d-excess variability is attributed to the different ocean surface conditions of relative humidity and sea surface temperature. Parallel sampling indicate very similar isotopic signatures at both sites and point to the existence of thermal effects of the Plaza de España site in Seville city during the summer season.  相似文献   

Timing of high-pressure metamorphic events in the Bulgarian Rhodopes from Lu–Hf garnet geochronology     

M.?KirchenbaurEmail author  J.?Pleuger  S.?Jahn-Awe  T.?J.?Nagel  N.?Froitzheim  R.?O.?C.?Fonseca  C.?Münker 《Contributions to Mineralogy and Petrology》2012,163(5):897-921

Within the Mediterranean realm, the Rhodopes represent a nappe stack of oceanic and continental fragments assembled along the Eurasian continental margin during the Alpine orogeny. The timing of the high-pressure (HP) metamorphism has long been ambiguous, lacking detailed geochronological and geochemical control on subduction-exhumation and nappe stacking processes. Here we apply the Lu–Hf and Sm–Nd chronometers to a suite of representative eclogite samples covering two different key units of the Rhodopean nappe stack: (1) the Kimi Complex (Upper Allochthon) and (2) the Middle Allochthon. In addition to geochronology, we also determined whole rock Hf and Nd isotope compositions as well as major and trace element concentrations in order to constrain the nature of the eclogite protoliths. Two HP metamorphic events were revealed by Lu–Hf geochronology: (1) a Lower Cretaceous event in the Upper Allochthon (126.0 ± 1.7 Ma) and (2) an Eocene event in the Middle Allochthon (44.6 ± 0.7 Ma; 43.5 ± 0.4 Ma; 42.8 ± 0.5 Ma), at conditions of ca. 700°C/20–25 kbar. Our new data provide direct evidence for multiple subduction events in the Rhodopes. Exhumation and subsequent thrusting of the Middle Allochthon on the Lower Allochthon can be narrowed down to the time span between 42 and 34 Ma. In a broader tectonic context, the Eocene ages for the HP metamorphism support the view that the Rhodopes represent a large-scale tectonic window, exposing the deepest nappe units of the Hellenides.  相似文献   

On the shearing behaviour of an artificially cemented soil   总被引：2，自引：1，他引：1  

Sara Rios  António Viana da Fonseca  Béatrice Anne Baudet 《Acta Geotechnica》2014,9(2):215-226

Ground improvement by cementation is a technique widely used because of the easiness of application and relatively low cost. To date, however, there is no global understanding of the behaviour of artificially cemented soil with respect to its dosage, so that in practice methodologies still rely on previous used scenarios rather than scientific facts. This paper presents results of low-to-high-pressure triaxial tests performed on pure and cemented specimens of decomposed granite where the dosage was controlled, chosen as a function of the ratio of porosity to volumetric cement content or adjusted porosity/cement index. The behaviour of the cemented soil was analysed in terms of peak strength and failure envelopes, stress dilatancy and state boundary surfaces, on which the influence of the porosity/cement index was examined.  相似文献   

Solubility of palladium in picritic melts: 1. The effect of iron     

V. Laurenz  R.O.C. Fonseca  P.J. Sylvester 《Geochimica et cosmochimica acta》2010,74(10):2989-350

In order to improve our understanding of HSE geochemistry, we evaluate the effect of Fe on the solubility of Pd in silicate melts. To date, experimentally determined Pd solubilities in silicate melt are only available for Fe-free anorthite-diopside eutectic compositions. Here we report experiments to study the solubility of Pd in a natural picritic melt as a function of pO₂ at 1300 °C in a one atm furnace. Palladium concentrations in the run products were determined by laser-ablation-ICP-MS. Palladium increases from 1.07 ± 0.26 ppm at FMQ-2, to 306 ± 19 ppm at FMQ+6.6. At a relative pO₂ of FMQ the slope in log Pd concentration vs. log pO₂ space increases considerably, and Pd concentrations are elevated over those established for AnDi melt compositions. In the same pO₂ range, ferric iron significantly increases relative to ferrous iron. Furthermore, at constant pO₂ (FMQ+0.5) Pd concentrations significantly increase with increasing X_FeO-total in the melt. Therefore, we consider ferric Fe to promote the formation of Pd²⁺ enhancing the solubility of Pd in the picrite melt significantly.The presence of FeO in the silicate melt has proven to be an important melt compositional parameter, and should be included and systematically investigated in future experimental studies, since most natural compositions have substantial FeO contents.  相似文献   

Interaction of acid mine drainage with waters and sediments at the Corona stream, Lousal mine (Iberian Pyrite Belt, Southern Portugal)   总被引：1，自引：0，他引：1  

E. Ferreira da Silva  C. Patinha  P. Reis  E. Cardoso Fonseca  J. X. Matos  J. Barrosinho  J. M. Santos Oliveira 《Environmental Geology》2006,50(7):1001-1013

This study investigates the geochemical characteristics of the acid mine drainage discharged from the abandoned mine adits and tailing piles in the vicinity of the Lousal mine and evaluates the extent of pollution on water and on the stream sediments of the Corona stream. Atmospheric precipitation interacting with sulphide minerals in exposed tailings produces runoff water with pH values as low as 1.9–2.9 and high concentrations of (9,249–20,700 mg l⁻¹), Fe (959–4,830 mg l⁻¹) and Al (136–624 mg l⁻¹). The acidic effluents and mixed stream water carry elevated Cu, Pb, Zn, Cd and As concentrations that exceed the water quality standards. However, the severity of contamination generally decreases 4 km downstream of the source due to mixing with fresh waters, which causes the dilution of dissolved toxic metals and neutralization of acidity. Some natural attenuation of the contaminants also occurs due to the general reduced solubility of most trace metals, which may be removed from solution, by either co-precipitation or adsorption to the iron and aluminium precipitates.  相似文献   

Phosphorus sequestration in Fe-rich sediments from two Brazilian tropical reservoirs     

R. Fonseca  T. Canário  M. Morais  F.J.A.S. Barriga 《Applied Geochemistry》2011,26(9-10):1607-1622

  相似文献   

Sulfide oxidation as a process for the formation of copper-rich magmatic sulfides   总被引：1，自引：0，他引：1  

Cora C. Wohlgemuth-Ueberwasser  Raúl O. C. Fonseca  Chris Ballhaus  Jasper Berndt 《Mineralium Deposita》2013,48(1):115-127

Typical magmatic sulfides are dominated by pyrrhotite and pentlandite with minor chalcopyrite, and the bulk atomic Cu/Fe ratio of these sulfides is typically less than unity. However, there are rare magmatic sulfide occurrences that are dominated by Cu-rich sulfides (e.g., bornite, digenite, and chalcopyrite, sometimes coexisting with metallic Cu) with atomic Cu/Fe as high as 5. Typically, these types of sulfide assemblages occur in the upper parts of moderately to highly fractionated layered mafic–ultramafic intrusions, a well-known example being the Pd/Au reef in the Upper Middle Zone of the Skaergaard intrusion. Processes proposed to explain why these sulfides are so unusually rich in Cu include fractional crystallization of Fe/(Ni) monosulfide and infiltration of postmagmatic Cu-rich fluids. In this contribution, we explore and experimentally evaluate a third possibility: that Cu-rich magmatic sulfides may be the result of magmatic oxidation. FeS-dominated Ni/Cu-bearing sulfides were equilibrated at variable oxygen fugacities in both open and closed system. Our results show that the Cu/Fe ratio of the sulfide melt increases as a function of oxygen fugacity due to the preferential conversion of FeS into FeO and FeO_1.5, and the resistance of Cu₂S to being converted into an oxide component even at oxygen fugacities characteristic of the sulfide/sulfate transition (above FMQ?+?1). This phenomenon will lead to an increase in the metal/S ratio of a sulfide liquid and will also depress its liquidus temperature. As such, any modeling of the sulfide liquid line of descent in magmatic sulfide complexes needs to address this issue.  相似文献   

Heavy metal accumulation in mangrove sediments surrounding a large waste reservoir of a local metallurgical plant, Sepetiba Bay, SE, Brazil     

E. F. Fonseca  J. A. Baptista Neto  C. G. Silva 《Environmental Earth Sciences》2013,70(2):643-650

Due to the growing rate of urbanization and a rapid and unplanned development in many tropical coastal areas, there continues to be an increasing concern in relation to the impact of anthropogenic activities on mangrove sediments. In southeastern Brazil, the Sepetiba Bay becomes an example of an ecosystem in the process of accelerated degradation. Previous studies highlighted the activities related with zinc processing by an industry on the Madeira’s Island as one of the main source of heavy metal to Sepetiba Bay. Despite the end of the industrial activities in the area, the waste reservoir became the main source of pollutant to the surrounding area. Analyses of Cd, Pb, Cu, Cr, Hg, Ni, Zn, particle size and nutrients of 20 sediment samples collected in the mangrove of the Madeira Island showed that the waste reservoir is the main source of contaminant to the mangrove. The statistic analyses showed that the moisture content and organic matter play an important role in the geochemical dynamic of heavy metal in the area.  相似文献   

Transition zone structure under a stationary hot spot: Cape Verde     

George Helffrich  Bruno Faria  João F.B.D. Fonseca  Alexandra Lodge  Satoshi Kaneshima 《Earth and Planetary Science Letters》2010,289(1-2):156-161

We report on a two-year seismic deployment in the Cape Verde Islands, one goal of which was to study the upper mantle to determine its structure under a hot spot that is stationary in the hot spot reference frame. We find from analysis of P-to-S receiver functions estimated from broadband seismic recordings that, within uncertainty, the time separation between the 410 and 660 km discontinuities is normal compared to radial earth models. Thus, to exist, even stationary hot spots do not require vertical thermal anomalies from deep melting sources anchored in the lower mantle or at the core–mantle boundary or their anomalies are narrower than ～ 250 km in the upper mantle.  相似文献