Road Reduction Filtering for GPS-GIS Navigation   总被引：2，自引：0，他引：2  

George Taylor  Geoffrey Blewitt  Doerte Steup  Simon Corbett  & Adrijana Car 《Transactions in GIS》2001,5(3):193-207

A novel method of map matching using the Global Positioning System (GPS) has been developed for civilian use, which uses digital mapping data to infer the systematic position errors of less than 100m which result largely from 'selective availability' (S/A) imposed by the US military. Selective availability was switched off on the 2nd of May 2000, and is to be replaced with 'regional denial capabilities in lieu of global degradation'. The system tracks a vehicle on all possible roads (road centre-lines) in a computed error region, then uses a method of rapidly detecting inappropriate road centre-lines from the set of all those possible. This is called the Road Reduction Filter (RRF) algorithm. Point positioning is computed using C/A code pseudorange measurements direct from a GPS receiver. The least squares estimation is performed in the software developed for the experiment described in this paper. Virtual differential GPS (VDGPS) corrections are computed and used from a vehicle's previous positions, thus providing an autonomous alternative to DGPS for in-car navigation and fleet management. Height aiding is used to augment the solution and reduce the number of satellites required for a position solution. Ordnance Survey (OS) digital map data was used for the experiment, i.e. OSCAR 1 m resolution road centre-line geometry and Land Form PANORAMA 1:50,000, 50 m-grid digital terrain model (DTM). Testing of the algorithm is reported and results are analysed. Vehicle positions provided by RRF are compared with the 'true' position determined using high precision (cm) GPS carrier phase techniques. It is shown that height aiding using a DTM and the RRF significantly improve the accuracy of position provided by inexpensive single frequency GPS receivers.  相似文献   

The Poseidon Operational Tool for the Prediction of Floating Pollutant Transport     

Pollani Annika  Triantafyllou George  Petihakis George  Nittis Konstantinos  Dounas Costas  Christoforos Koutitas 《Marine pollution bulletin》2001,43(7-12):270-278

In this work the development and the application of an operational management tool for the Greek Seas is described. This tool consists of a three-dimensional floating pollutant prediction model coupled with a weather, a hydrodynamic and a wave model in order to track the movements and the spreading of the pollutants and indicate those coastal areas which might be affected. The tool is part of the Poseidon system which has been designed to provide real time data and forecasts for marine environmental conditions in the Greek Seas. In this paper, we present four case studies based on realistic scenarios that show the value of the application for long-term strategic planning and short-term decision making in oil spill accidents.  相似文献   

Scattering of seismic waves by cracks in multi-layered geological regions: II. Numerical results     

Petia S. Dineva  George D. Manolis 《Soil Dynamics and Earthquake Engineering》2001,21(7)

The mechanical model for plane strain, time-harmonic seismic wave propagation problems in cracked, multi-layered geological regions with surface topography and non-parallel interfaces was described in the first part of this work. Here, this model is used to investigate the response of such a region to the presence of traveling elastic waves generated by a seismic source. The computational methodology that was developed in the first part is based on a combination of both the regular (displacement-based) and the hypersingular (traction-based) Boundary Integral Equation Method (BIEM). First, the accuracy and convergence characteristics of this hybrid BIEM are studied. Then, a series of problems involving four different configurations of a reference geological deposit with both interface and internal cracks are solved, for a loading that is due to a seismically-induced pressure wave propagating upwards from the underlying rigid half-plane. The purpose of the numerical study is to investigate the influence of various key parameters of the problem, such as frequency and incidence angle of the incoming wave, size of the surface relief, location and size of the buried cracks, interaction effects between cracks and finally the presence of layers, on both the scattered displacement field and the stress concentration field.  相似文献   

Hydraulic properties of groundwater systems in the saprolite and sediments of the wheatbelt, Western Australia     

Richard J. George 《Journal of Hydrology》1992,130(1-4):251-278

Hydraulic properties of deeply weathered basement rocks and variably weathered sedimentary materials were measured by pumping and slug-test methods. Results from over 200 bores in 13 catchments, and eight pumping-test sites across the eastern and central wheatbelt of Western Australia were analysed. Measurements were made in each of the major lithological units, and emphasis placed on a ubiquitous basal saprolite aquifer. Comparisons were made between alternative drilling and analytical procedures to determine the most appropriate methods of investigation.

Aquifers with an average hydraulic conductivity of 0.55 m day⁻¹ occur in variably weathered Cainozoic sediments and poorly weathered saprolite grits (0.57 m day⁻¹). These aquifers are separated by an aquitard (0.065 m day⁻¹) comprising the mottled and pallid zones of the deeply weathered profile. Locally higher values of hydraulic conductivity occur in the saprolite aquifer, although after prolonged periods of pumping the values decrease until they are similar to those obtained from the slug-test methods. Hydraulic conductivities measured in bores drilled with rotary auger rigs were approximately an order of magnitude lower than those measured in the same material with bores drilled by the rotary air-blast method.

Wheatbelt aquifers range from predominantly unconfined (Cainozoic sediments), to confined (saprolite grit aquifer). The poorly weathered saprolite grit aquifer has moderate to high transmissivities (4–50 m² day⁻¹) and is capable of producing from less than 5 to over 230 kl day⁻¹ of ground water, which is often of a quality suitable for livestock. Yields are influenced by the variability in the permeability of isovolumetrically weathered materials from which the aquifer is derived.

The overlying aquitard has a low transmissivity (< 1 m² day⁻¹), especially when deeply weathered, indurated and silicified. The transmissivity of the variably weathered sedimentary materials ranges from less than 0.5 m² day⁻¹ to over 10 m² day⁻¹, depending on the texture of the materials and their position within the landscape. Higher transmissivity zones may occur as discrete layers of coarser textured materials. The salinity of the saprolite and sedimentary aquifers ranges from less than 2000 mgl⁻¹ to greater than 250000 mgl⁻¹ (total dissolved solids; TDS), depending on position within the landscape. Secondary soil salinization develops when groundwater discharge occurs from either saprolite or sedimentary aquifers.  相似文献   

2-D full-wavefield inversion for wide-aperture, elastic, seismic data     

Robert Sun  George A. McMechan 《Geophysical Journal International》1992,111(1):1-10

  相似文献   

Dielectric constants of apatite,epidote, vesuvianite,and zoisite,and the oxide additivity rule     

Robert D. Shannon  George R. Rossman 《Physics and Chemistry of Minerals》1992,19(3):157-165

The dielectric constants and dielectric loss values of 4 Ca-containing minerals were determined at 1 MHz using a two-terminal method and empirically determined edge corrections. The results are: vesuvianitel κ′ _a=9.93 tan δ=0.006 κ′ _c=9.79 tan δ=0.005 vesuvianitel κ′ _a=10.02 tan δ=0.002 κ′ _c=9.85 tan δ=0.003 zoisite1 κ′ _a =10.49 tan δ=0.0006 κ′ _b =15.31 tan δ=0.0008 κ′ _c=9.51 tan δ=0.0008 zoisite2 κ′ _a =10.55 tan δ=0.0011 κ′ _b =15.45 tan δ=0.0013 κ′ _c=9.39 tan δ=0.0008 epidote κ′ ₁₁= 9.52 tan δ=0.0008 κ′ ₂₂=17.1 tan δ=0.0009 κ′ ₃₃= 9.37 tan δ=0.0006 fluorapatite1 κ′ _a =10.48 tan δ=0.0008 κ′ _c = 8.72 tan δ=0.0114 fluorapatite2 κ′ _a =10.40 tan δ=0.0010 κ′ _c=8.26 tan δ=0.0178 The deviation (δ) between measured dielectric polarizabilities as determined from the Clausius-Mosotti equation and those calculated from the sum of oxide polarizabilities according to α _D (mineral)=∑ α _D (oxides) for vesuvianite is ～ 0.5%. The large deviations of epidote and zoisite from the additivity rule with Δ=+ 10.1 and + 11.7%, respectively, are attributed to “rattling” Ca ions. The combined effects of both a large F thermal parameter and possible F-ion conductivity in fluorapatite are believed to be responsible for Δ=+2–3%. Although variation of oxygen polarizability with oxygen molar volume (V_o) is believed to affect the total polarizabilities, the variation of V_o in these Ca minerals is too small to observe the effect.  相似文献   

Book reviews     

D. Toll  George Tsifoutidis 《Geotechnical and Geological Engineering》1995,13(2):113-116

  相似文献   

Preliminary study of crust-upper mantle structure of the Tibetan Plateau by using broadband teleseismic body waveforms   总被引：2，自引：0，他引：2  

Lu-Pei Zhu  Rong-Sheng Zeng  Francis T. Wu  Thomas J. Owens  George E. Randall 《地震学报(英文版)》1993,6(2):305-316

As part of a joint Sino-U.S. research project to study the deep structure of the Tibetan Plateau, 11 broadband digital seismic recorders were deployed on the Plateau for one year of passive seismic recording. In this report we use teleseimic P waveforms to study the seismic velocity structure of crust and upper mantle under three stations by receiver function inversion. The receiver function is obtained by first rotating two horizontal components of seismic records into radial and tangential components and then deconvolving the vertical component from them. The receiver function depends only on the structure near the station because the source and path effects have been removed by the deconvolution. To suppress noise, receiver functions calculated from events clustered in a small range of back-azimuths and epicentral distances are stacked. Using a matrix formalism describing the propagation of elastic waves in laterally homogeneous stratified medium, a synthetic receiver function and differential receiver functions for the parameters in each layer can be calculated to establish a linearized inversion for one-dimensional velocity structure. Preliminary results of three stations, Wen-quan, Golmud and Xigatze (Coded as WNDO, TUNL and XIGA), located in central, northern and southern Plateau are given in this paper. The receiver functions of all three stations show clear P-S converted phases. The time delays of these converted phases relative to direct P arrivals are: WNDO 7.9s (for NE direction) and 8.3s (for SE direction), TUNL 8.2s, XIGA 9.0s. Such long time delays indicate the great thickness of crust under the Plateau. The differences between receiver function of these three station shows the tectonic difference between southern and north-central Plateau. The waveforms of the receiver functions for WNDO and TUNL are very simple, while the receiver function of XIGA has an additional midcrustal converted phase. The S wave velocity structures at these three stations are estimated from inversions of the receiver function. The crustal shear wave velocities at WNDO and TUNL are vertically homogeneous, with value between 3.5–3.6 km/s down to Moho. This value in the lower crust is lower than the normal value for the lower crust of continents, which is consistent with the observed strong Sn attenuation in this region. The velocity structure at XIGA shows a velocity discontinuity at depth of 20 km and high velocity value of 4.0 km/s in the midcrust between 20–30 km depth. Similar results are obtained from a DSS profile in southern Tibet. The velocity under XIGA decreases below a depth of 30 km, reaching the lowest value of 3.2 km/s between 50–55 km. depth. This may imply that the Indian crust underthrusts the low part of Tibetan crust in the southern Plateau, forming a “double crust”. The crustal thickness at each of these sites is: WNDO, 68 km; TUNL, 70 km; XI-GA, 80 km. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,14, Supp., 581–592, 1992.  相似文献   

The San Fernando California earthquake     

George W. Housner  Paul C. Jennings 《地震工程与结构动力学》1972,1(1):5-31

  相似文献   

An attempt at energy index (EI) analysis of the Upper Anisian,Ladinian and Carnian carbonate rocks in the Teteven anticlinorium (Bulgaria)     

George A. Čatalov 《Sedimentary Geology》1972

Two sections of Triassic carbonate rocks were investigated by means of energy-index logs (EI logs). Three more terms are applied here in addition to the well-known terminology: EI log of the energy minima (EI log_min), EI log of the energy maxima (EI log_max) and differential EI field (DEI field). Characteristics of the EI classification parameters for the Upper Anisian, Ladinian and Carnian carbonate rocks are provided. Their EI classification comprises four types and twelve subtypes of limestones. The application of this classification established eight complete energy cycles (according to the scale chosen). The comparison of the EI logs of the two sections showed certain differences only in the detailed configuration of the cycles. This is due to lateral alternations in the beds. The general energy evolution trend of the two sections is identical. The dolomite formation during the Norian was preceded by rapid lowering of the energy levels in the upper part of the Carnian. The ostracods and foraminifers are related to the lowest energy levels, whereas the crinoids, brachiopods, bryozoans and thickshelled pelecypods are related to the medium and high energy levels.  相似文献