Hybrid simulation of a partial-strength steel–concrete composite moment-resisting frame endowed with hysteretic replaceable beam splices     

Roberto Andreotti  Giulia Giuliani  Nicola Tondini  Oreste S. Bursi 《地震工程与结构动力学》2023,52(1):51-70

This paper deals with the seismic response assessment of a steel–concrete moment-resisting frame (MRF) equipped with special dissipative replaceable components (DRCs): the dissipative replaceable beam splices (DRBeS), which combine large energy dissipation with ease of replacement. The evaluation of the full potential of DRBeS requires a system-level investigation, that is, a six-story MRF, whereby the hysteretic effects of beam splices partial-strength joints are considered on the global response of the structural system. Therefore, an OpenSees finite element (FE) frame model, based on previous experimental campaigns with cyclic displacements on partial-strength joints, and a Matlab model validated on OpenSees, were used for a more complex experimental activity via hybrid simulation (HS). The aim of the simulations was twofold: (i) to increase knowledge of the non-linear behaviour of steel-concrete composite partial-strength MRFs; and (ii) to study the effectiveness of the DRBeS components for increasing the recovery of functionality after a major seismic event. Therefore, to appreciate the performance of the partial-strength MRF at damage limitation (DL), significant damage (SD) and near collapse (NC) within the performance-based earthquake engineering (PBEE) approach, HSs were carried out. In such instances, the ground floor was physically tested at full scale in the laboratory and the remainder of the structure was numerically simulated. Relevant results showed that the DRBeS were capable of dissipating a significant amount of hysteretic energy and of protecting the non-dissipative parts of partial-strength joints and the overall structure with an ease of replacement.  相似文献   

Prospects for crowdsourced information on the geomorphic ‘engineering’ by the invasive Coypu (Myocastor coypus)          下载免费PDF全文

Giulia Sofia  Roberta Masin  Paolo Tarolli 《地球表面变化过程与地形》2017,42(2):365-377

Among the most invasive species, the Coypu (Myocastor coypus) best exemplifies the widespread effect of alien species on ecosystems. Among the impacts, the induced erosion in riverbanks has an increasing economic and social importance. Despite its significance, this type of erosion is rarely quantified, and the available information is limited to local knowledge, grey literature, and maintenance reports. This research shows the potential of freely and instantly available Structure‐from‐Motion (SfM) photogrammetry to obtain crowdsourced information based on smartphone images. The results highlight how it is possible to provide a rough estimate of the damages with relatively low or null cost of application, and limited expert knowledge and expenditure of time, depending on the scale of analysis. The proposed technique provides a fresh approach to a known long‐standing issue, offering a new source of information for farmers, researchers, wildlife managers, as well as for land managers and planners. The potential applications of such a technique and its unprecedented ease of use and very low cost offer effective tools for management plans and scientific research, providing a basis to relate eroded volumes to the functioning of the drainage system and the connected agroecosystem. The method would also enable the opportunity of participatory and opportunistic crowdsourced sensing. Further scientific research on the crowd‐based data on erosion should encourage standardisation of data gathering and accessibility, together with a public involvement in information exchange, to generate a better understanding and awareness of erosion problems also for other fields of research. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Evaluating the effects of protection on two benthic habitats at Tavolara-Punta Coda Cavallo MPA (North-East Sardinia, Italy)     

Ceccherelli G  Casu D  Pala D  Pinna S  Sechi N 《Marine environmental research》2006,61(2):171-185

In this paper, two benthic habitats have been investigated in a fully protected site and two control sites at the Tavolara-Punta Coda Cavallo marine protected area (MPA) (NE Sardinia). Overall, a protection effect on the benthic assemblages was highlighted in the shallow subtidal (5 m deep) rather than at intertidal algal turf habitat. Structure of assemblages at the shallow subtidal habitat is different in the fully protected site vs. controls, while this was not true for the intertidal habitat. At the subtidal, this finding is probably linked to indirect effects due to an increase of consumers in the protected site (e.g., sea urchins), while the lack of direct impacts in the intertidal at control sites is indicative of very similar assemblages. Cover of encrusting algae was significantly higher at the subtidal protected site suggesting a possible higher grazing pressure. Possible causes underlying the inconsistency of results obtained between habitats include the possibility that trophic cascade effects have a different influence at different heights on the shore. The need to estimate the interconnection among benthic habitats through trophic links is also highlighted to provide an estimate of the vulnerability to protection of various habitats.  相似文献   

Addressing some critical aspects of the BepiColombo MORE relativity experiment     

Giulia Schettino  Daniele Serra  Giacomo Tommei  Andrea Milani 《Celestial Mechanics and Dynamical Astronomy》2018,130(11):72

The Mercury Orbiter Radio science Experiment (MORE) is one of the experiments on-board the ESA/JAXA BepiColombo mission to Mercury, to be launched in October 2018. Thanks to full on-board and on-ground instrumentation performing very precise tracking from the Earth, MORE will have the chance to determine with very high accuracy the Mercury-centric orbit of the spacecraft and the heliocentric orbit of Mercury. This will allow to undertake an accurate test of relativistic theories of gravitation (relativity experiment), which consists in improving the knowledge of some post-Newtonian and related parameters, whose value is predicted by General Relativity. This paper focuses on two critical aspects of the BepiColombo relativity experiment. First of all, we address the delicate issue of determining the orbits of Mercury and the Earth–Moon barycenter at the level of accuracy required by the purposes of the experiment and we discuss a strategy to cure the rank deficiencies that appear in the problem. Secondly, we introduce and discuss the role of the Solar Lense–Thirring effect in the Mercury orbit determination problem and in the relativistic parameters estimation.  相似文献   

Understanding hydrological processes in glacierized catchments: Evidence and implications of highly variable isotopic and electrical conductivity data     

Giulia Zuecco  Luca Carturan  Fabrizio De Blasi  Roberto Seppi  Thomas Zanoner  Daniele Penna  Marco Borga  Alberto Carton  Giancarlo Dalla Fontana 《水文研究》2019,33(5):816-832

The spatial and temporal characterization of geochemical tracers over Alpine glacierized catchments is particularly difficult, but fundamental to quantify groundwater, glacier melt, and rain water contribution to stream runoff. In this study, we analysed the spatial and temporal variability of δ²H and electrical conductivity (EC) in various water sources during three ablation seasons in an 8.4‐km² glacierized catchment in the Italian Alps, in relation to snow cover and hydro‐meteorological conditions. Variations in the daily streamflow range due to melt‐induced runoff events were controlled by maximum daily air temperature and snow covered area in the catchment. Maximum daily streamflow decreased with increasing snow cover, and a threshold relation was found between maximum daily temperature and daily streamflow range. During melt‐induced runoff events, stream water EC decreased due to the contribution of glacier melt water to stream runoff. In this catchment, EC could be used to distinguish the contribution of subglacial flow (identified as an end member, enriched in EC) from glacier melt water to stream runoff, whereas spring water in the study area could not be considered as an end member. The isotopic composition of snow, glacier ice, and melt water was not significantly correlated with the sampling point elevation, and the spatial variability was more likely affected by postdepositional processes. The high spatial and temporal variability in the tracer signature of the end members (subglacial flow, rain water, glacier melt water, and residual winter snow), together with small daily variability in stream water δ²H dynamics, are problematic for the quantification of the contribution of the identified end members to stream runoff, and call for further research, possibly integrated with other natural or artificial tracers.  相似文献   

Optical Frequency Comb as a general-purpose and wide-band calibration source for astronomical high resolution infrared spectrographs     

Giulia Schettino  Ernesto Oliva  Massimo Inguscio  Carlo Baffa  Elisabetta Giani  Andrea Tozzi  Pablo Cancio Pastor 《Experimental Astronomy》2011,31(1):69-81

A spectrally filtered Optical Frequency Comb (OFC) laser is proposed as a versatile calibration source for astronomical spectrometers in the 1?C2 ??m spectral range. Such a source overcomes the limitations of current calibration lamps providing a uniform spectrum of equally spaced lines with similar intensity and extremely high long-term frequency stability. We present preliminary studies and results of a system which filters the OFC from a 100 MHz comb spacing to 16 GHz one, an adequate spacing for spectrometers with resolving power ????/???>30000. The first approach employs two Fabry-Perot cavities in series, made of dielectric coated mirrors, followed by a non-linear optical broadening system. The limitations of such a filtering process are discussed. These can be overcome by the second approach, based on filtering cavities with metallic coated mirrors.  相似文献   

Alternative conceptual models and the robustness of groundwater management scenarios in the multi-aquifer system of the Central Veneto Basin, Italy   总被引：1，自引：1，他引：0  

Giulia Passadore  Martina Monego  Lorenzo Altissimo  Andrea Sottani  Mario Putti  Andrea Rinaldo 《Hydrogeology Journal》2012,20(3):419-433

A three-dimensional (3D) groundwater flow model of the deep multi-aquifer Quaternary deposits of the Po plain sedimentary basin, within a 3,300-km² area (Veneto, Italy), is developed, tested and applied to aid sustainable large-scale water-resources management. Integrated mathematical modelling proves significantly successful, owing to an unusual wealth of available geological, geophysical, and hydrologic data and to state-of-the-art numerical tools. Of particular interest is the evaluation of the influence of alternative conceptual models; that is, of reconstructed representations of the 3D geological model of the structure of the aquifers. The reference conceptual model is set up by means of extended geological sections and stratigraphic records, and is used to create a large, unstructured 3D finite element grid. By analyzing the effects on piezometric surfaces and on the overall water budget of geometrical perturbations from the reference structure, alternative geo-structural models, obtained by systematically shifting the pinch-out of the aquitards, are compared. Interestingly, the impacts of aquitard pinch-out prove far from negligible. The results suggest the critical importance of reliable geological models even for large, complex 3D models. The good practice of iteratively testing numerically the impact of surprises on the conceptual model, as more field information is collected, is thus supported.  相似文献   

Field study on drainage densities and rescaled width functions in a high‐altitude alpine catchment          下载免费PDF全文

Raphaël Mutzner  Paolo Tarolli  Giulia Sofia  Marc B. Parlange  Andrea Rinaldo 《水文研究》2016,30(13):2138-2152

This paper addresses the effect of accurately mapping spatially heterogeneous drainage densities in high‐altitude alpine basins on Rescaled Width Functions (RWFs), used in some applications as a minimalist model of the hydrologic response. The channel network and 373 of its channel heads were mapped in the field in a high mountain catchment in the Swiss Alps. The mapped channel network is characterized by highly uneven drainage density, here described by the distribution of the length to the first channelized site computed along steepest descent from any unchannelled site. Various channel networks were extracted from a 1 m lidar‐derived digital terrain model and compared with the field‐mapped channel network using geomorphologic parameters, hillslope‐to‐channel distance and RWFs. Our results show that the channel network derived by statistical analysis of surface morphology is consistent with the field‐mapped network. Larger discrepancies were observed when the channel network was obtained with classical threshold‐based approaches relying on cumulative drainage area and local slope. The actual arrangement of the drainage densities has a significant impact on the RWFs. The discrepancy was largest between RWFs derived from classical extraction methods and RWFs derived with the field‐mapped network, indicating an inappropriate extraction of the channelled portion of the high‐altitude catchment that is a reflection of the variety of channel initiation processes. Our results suggest that spatial heterogeneity of the drainage density might play an important role in modelling streamflow generation. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Dam-break Modeling in Alpine Valleys     

Marco PILOTTI  Andrea MARANZONI  Luca MILANESI  Massimo TOMIROTTI  Giulia VALERIO 《山地科学学报》2014,(6):1429-1441

Dam-break analysis is of great importance in mountain environment,especially where reservoirs are located upstream of densely populated areas and hydraulic hazard should be assessed for land planning purposes.Accordingly,there is a need to identify suitable operative tools which may differ from the ones used in flat flood-prone areas.This paper shows the results provided by a 1D and a 2D model based on the Shallow Water Equations（SWE） for dam-break wave propagation in alpine regions.The 1D model takes advantage of a topographic toolkit that includes an algorithm for pre-processing the Digital Elevation Model（DEM） and of a novel criterion for the automatic cross-section space refinement.The 2D model is FLO-2D,a commercial software widely used for flood routing in mountain areas.In order to verify the predictive effectiveness of these numerical models,the test case of the Cancano dam-break has been recovered from the historical study of De Marchi（1945）,which provides a unique laboratory data set concerning the consequences of the potential collapse of the former Cancano dam（Northern Italy）.The measured discharge hydrograph at the dam also provides the data to test a simplified method recently proposed for the characterization of the hydrograph following a sudden dam-break.  相似文献   

A landslide in stiff,intact clay   总被引：1，自引：0，他引：1  

R. M. S. Maiorano  G. Russo  C. Viggiani 《Acta Geotechnica》2014,9(5):817-829

A landslide in a stiff clay formation, interrupting the excavation of a tunnel for a major railway in Sicily, is reported. Limit equilibrium and FEM undrained and drained analyses of the slope before tunnel excavation agree in showing that the slope was stable with a relatively high factor of safety and the critical slip surface is located well above the tunnel. The undrained stability of the tunnel checked both via FEM and via standard analytical solutions for face stability is also verified. The FEM analyses of the slope have been repeated considering the excavation of the tunnel in undrained and drained conditions. The advancement of the tunnel face is simulated in a plane strain analysis by the Panet method. In undrained conditions, the system keeps stable. In drained conditions with a stress release factor of 50 %, the slope is on the verge of failing with a very low safety factor, while with a stress release factor of 80 %, it fails following a complex mechanism that matches the observed failure surface. These findings are discussed and some conclusions attempted.  相似文献