A New Algorithm for Wind-Vector Retrieval From Scatterometers     

Gohil  B.S. Sarkar  A. Agarwal  V.K. 《Geoscience and Remote Sensing Letters, IEEE》2008,5(3):387-391

A new efficient algorithm for retrieving wind-vector solutions from scatterometers is developed based on a criterion of minimum normalized standard deviation (NSD) of wind speed derived from backscatter measurements using a geophysical model function (GMF). Its performance has been evaluated through simulations using QSCAT-1 GMF and the QuikSCAT observational geometry. The present algorithm, named the NSD algorithm, is found to be computationally more efficient (two to three times) besides being at par with the maximum-likelihood estimator (MLE) algorithm in terms of retrieval skill, retrieval errors, and distribution of solutions, on the basis of simulations as well as comparison of limited QuikSCAT-data-derived winds with National Centers for Environmental Prediction and European Centre for Medium-Range Weather Forecasts model winds. Simulation results and analysis of sample QuikSCAT data are presented.   相似文献   

磷处理粉煤灰可作农业土壤磷源   总被引：2，自引：0，他引：2  

申俊峰  M.A.Powell  D.B.Hayden 《地学前缘》2008,15(6):112

粉煤灰(简称CCP或ash)具有改良土壤,增加植物产量的功能。此外,由于它特殊的多孔结构,也可用作吸纳并承载植物养分的载体。用NaH2PO4配制成含磷0.10mol/L浓度的溶液,对采自加拿大西安大略省Sarnia地区Lambton电厂的底灰(bottomash)进行振荡浸渍处理。结果表明,振荡浸渍66h后的粉煤灰中磷含量可达784×10-6。以磷处理粉煤灰、未进行磷处理的粉煤灰和石英砂按比例混合,作为基本生长介质进行玉米种植实验,其中实验配方设计为生长介质中含磷量分别为标准含磷浓度(50×10-6)的10%、25%、50%、75%和100%。生长26、34和46d后分别与不含磷的空白配方、施加含氮-磷-钾为0-20-0标准磷肥并控制磷含量为标准浓度(50×10-6)配方进行生物产量对比。生长实验结果表明,以磷处理粉煤灰供磷的生长介质,当含磷量为标准浓度的25%至100%时,其植物生长量就比添加标准浓度磷肥的配方好。种植46d后的生物生长量统计结果显示,含磷分别为标准浓度50%、75%和100%的实验介质中,玉米杆的鲜重较施标准磷肥介质中玉米分别增长39.46%、42.73%和46.13%;玉米杆干重依次增加29.71%、13.39%和28.87%;根鲜重平均增加16.62%;根干重平均增加14.03%。上述实验结果启示,粉煤灰可以很好地吸纳承载磷养分,并持续供给植物吸收生长,如果采用吸纳磷(或其他养分)的粉煤灰改良砂质土壤将有重要意义。  相似文献   

Application of an environmentally optimum cooling water system design in water and energy conservation   总被引：3，自引：3，他引：0  

M. H. Panjeshahi Ph.D.  A. Ataei M.Sc. 《International Journal of Environmental Science and Technology》2008,5(2):251-262

Recirculating cooling water systems are consist of a cooling tower and heat-exchanger network which conventionally have a parallel configuration. However, reuse of water between different cooling duties enables cooling water networks to be designed with series arrangements. This will results in performance improvement and increased cooling tower capacity. Research on recirculating cooling water systems has mostly focused on the individual components. However, a particular design method represented by Kim and Smith accounts for the whole system interactions. In this study, the Kim and Smith design method is expanded and a comprehensive simulation model of recirculating cooling system was developed to account for the interaction between the cooling tower performance and the heat-exchanger network configuration. Regarding this model and considering cycle water quality through introducing ozone treatment technology, a modern methodology of recirculating cooling water system design was established and developed. This technique, called the integrated ozone treatment cooling system design, is a superior designed tool based on pinch analysis and mathematical programing. It also ensures maximum water and energy conservation, minimum cost and environmental impacts. Related coding in MATLAB version 7.3 was used for the illustrative example to get optimal values in cooling water design method computations. The result of the recently introduced design methodology was compared with the Kim and Smith design method.  相似文献   

Ability of indigenous Bacillus licheniformis and Bacillus subtilis in microbial enhanced oil recovery   总被引：1，自引：1，他引：0  

S. Haghighat  A. Akhavan Sepahy Ph.D.  M. Mazaheri Assadi Ph.D.  H. Pasdar Ph.D. 《International Journal of Environmental Science and Technology》2008,5(3):385-390

Microbially produced lipopeptide have been isolated and studied for microbial enhanced oil recovery. About 60 gram positive bacteria isolated from soil contaminated with crude oil, near the crude oil storage tank in Tehran Refinery, Tehran, Iran. However, most of these studies have produced lipopeptide by one of the pure-culture microbes isolated in a laboratory. Among the isolates, heamolytic tests revealed two biosurfactant producers. The isolated strains were designated as C2, E1. By using morphological, biochemical and molecular biology tests (16 SrRNA), the strains identified as Bacillus licheniformis and Bacillus subtitlis, respectively. Emulsification activity and measurement of surface tension indicated that, the isolates were high producers of biosurfactant. The product of C2 and E1 is mainly lipopeptide. This product reduce surface tension from 65 to 30 mN/m. Emulsified activity of crude oil was 92% for C2 and 90 % in case of E1. This is the first report of indigenous Bacillus licheniformis and Bacillus subtilis from a soil contaminated with oil in an Iranian refinery with ability to produce biosurfactant.  相似文献   

Particle size distribution and dissolution properties of metals in cyclone fly ash   总被引：1，自引：0，他引：1  

H. Rönkkömäki Ph.D.  R. Pöykiö Ph.D.  H. Nurmesniemi Ph.D.  K. Popov D.Sc.  E. Merisalu Dr.  T. Tuomi PhD  I. Välimäki M.Sc. 《International Journal of Environmental Science and Technology》2008,5(4):485-494

The particles in the examined cyclone fly ash were all smaller than 0.25 mm. in diameter, and particles smaller than 0.075 mm. in diameter accounted for 88.4 % of the ash weight. This result indicates that cyclone fly ash consists of particles with a small diameter. The metals in the cyclone fly ash were enriched in small particles. The highest concentrations for zinc, copper, lead, cadmium and molybdenum in the cyclone fly ash were found in the smallest particle size fraction (< 0.075 mm.) and for Barium, chromium, nickel, Vanadium and Cobalt in the second to smallest particle size fraction (0.075-0.125 mm.). From an environmental and toxicological standpoint, the smallest particles are of the greatest concern when ash is handed at landfill disposal sites (transport and disposal especially in stormy weather conditions), and some studies have reported risks to workers from prolonged exposure to ash. The results of the comparison of various dissolution methods for metals showed that the digestion procedures with nitric acid alone (USEPA 3051) or with a mixture of nitric acid + hydrogen peroxide (USEPA 3050B) slightly underestimated the metal concentrations in the cyclone fly ash. Although the use of hydrofluoric acid is often necessary for the determination of a number of elements associated with siliceous minerals, its use can result in loss of trace elements during dissolution.  相似文献   

A combined mathematical geophysical model for prediction of pyrite oxidation and pollutant leaching associated with a coal washing waste dump   总被引：3，自引：0，他引：3  

F. Doulati Ardejani Ph.D.  B. Jodieri Shokri M.Sc.  A. Moradzadeh Ph.D.  E. Soleimani Ph.D.  M. Ansari Jafari Ph.D. 《International Journal of Environmental Science and Technology》2008,5(4):517-526

The waste produced by coal washing process produces many environmental problems. In this study, the pollution problems associated with the waste produced by Alborz Sharghi Coal Washing Plant was investigated by mathematical modeling. The study area is located at 11 km. to Razmjah coal region and 45 km. to Tehran-Mashhad road in the north part od Iran. To achieve the goal, a few samples were taken from different depths at three points on the waste dump in order to investigate pyrite oxidation and pollution generation. The samples were then analysed, using an AA-670 Shimadzu atomic absorption to determine the fraction of pyrite remained within the waste particles. A numerical finite volume model using Phoenics package has been developed to simulate pyrite oxidation and pollution generation from the Alborz Sharghi coal washing waste dump. The pyrite oxidation reaction is described by the shrinking-core model. Gaseous diffusion is the main mechanism for the transport of oxygen through the waste. The results of numerical modelling were compared with the field observations and close agreement was achieved. A simple mathematical model incorporating advection and hydrodynamic dispersion processes was also presented in order to verify the results of geophysical time-laps method showing transportation of the pollutants through the downstream of the waste dump. Both mathematical model and geophysical time-laps method are agreed in the identification of pollutant transport emanated from the waste dump. The results of such investigations can be used for designing an effective environmental management program.  相似文献   

Automated Kerogen Classification in Microscope Images of Dispersed Kerogen Preparation     

L. I. Kuncheva  J. J. Charles  N. Miles  A. Collins  B. Wells  I. S. Lim 《Mathematical Geosciences》2008,40(6):639-652

We develop the classification part of a system that analyses transmitted light microscope images of dispersed kerogen preparation. The system automatically extracts kerogen pieces from the image and labels each piece as either inertinite or vitrinite. The image pre-processing analysis consists of background removal, identification of kerogen material, object segmentation, object extraction (individual images of pieces of kerogen) and feature calculation for each object. An expert palynologist was asked to label the objects into categories inertinite and vitrinite, which provided the ground truth for the classification experiment. Ten state-of-the-art classifiers and classifier ensembles were compared: Naïve Bayes, decision tree, nearest neighbour, the logistic classifier, multilayered perceptron (MLP), support vector machines (SVM), AdaBoost, Bagging, LogitBoost and Random Forest. The logistic classifier was singled out as the most accurate classifier, with an accuracy greater than 90. Using a 10 times 10-fold cross-validation provided within the Weka software, we found that the logistic classifier was significantly better than five classifiers (p<0.05) and indistinguishable from the other four classifiers. The initial set of 32 features was subsequently reduced to 6 features without compromising the classification accuracy. A further evaluation of the system alerted us to the possible sensitivity of the classification to the ground truth that might vary from one human expert to another. The analysis also revealed that the logistic classifier made most of the correct classifications with a high certainty.  相似文献   

On the use of gravity and magnetic anomalies for locating probable areas of metallic mineralization in South Sinai, Egypt   总被引：1，自引：0，他引：1  

El-Arabi H. Shendi  A. M. Ismail  Tamer E. Attia 《Arabian Journal of Geosciences》2008,1(2):137-147

The present study deals with processing and interpreting the potential gravity and magnetic data in order to locate promising sites for metallic mineral occurrences in the basement rocks of South Sinai. Two promising sites were anticipated by combining the geophysical results and the available geological information. Each site was profiled and interpreted to the nearly approximated subsurface feature model, and the geometrical parameters of the expected subsurface structures may form mineralized bodies such as depth, thickness, width, dipping, density contrast, and magnetic susceptibility contrast could be delineated. Detailed ground Very Low Frequency (VLF) and Vertical Magnetic Gradient (VMG) methods were carried out in the site A2, eight VLF and VMG anomalies were determined, and their depths were calculated.  相似文献   

Microlites and "nanolites" in rhyolitic glass: microstructural and chemical characterization     

Thomas G. Sharp  Richard J. Stevenson  Donald B. Dingwell 《Bulletin of Volcanology》1996,57(8):631-640

 We used transmission electron microscopy (TEM) and scanning electron microscopy (SEM) to study magmatic crystals in the Ben Lomond rhyolite lava dome, Taupo Volcanic Center, New Zealand. Using TEM and SEM to investigate the size distributions of these crystals, we identified three size populations: microphenocrysts (>1.2 μm wide), microlites (>0.6 μm wide), and smaller crystals (<0.6 μm wide) which we term "nanolites". The predominant mineral phases of the microlites and nanolites are augites, pigeonites, and hypersthenes. The compositions and microstructures within these pyroxenes indicate disequilibrium crystallization at approximately 850–900  °C and undercoolings as high as 300  °C from equilibrium crystallization temperatures. Complex microstructures resulting from subsolidus reactions in augite and pigeonite are consistent with moderate cooling rates within the upper obsidian layer of the Ben Lomond rhyolite dome. This study demonstrates the existence of sub-micron magmatic crystals in a rhyolite and illustrates the potential of TEM to provide unique information about the crystallization and cooling histories of glassy volcanic rocks. Received: May 8, 1995 / Accepted: November 27, 1995  相似文献   

Testing for quantized redshifts. I. The project     

W. M. Napier  B. N. G. Guthrie 《Astrophysics and Space Science》1996,244(1-2):57-63

A project intended to examine the long-standing claims that extragalactic redshifts are periodic or quantized was initiated some years ago at the Royal Observatory, Edinburgh. The approach taken is outlined, and the main conclusions to date are summarized. The existence of a galactocentric redshift quantization is confirmed at a high confidence level.  相似文献