Mineralogy and geochemistry of El Dorado epithermal gold deposit, El Sauce district, central-northern Chile   总被引：1，自引：0，他引：1  

J. Carrillo-Rosúa  S. Morales-Ruano  D. Morata  A. J. Boyce  M. Belmar  A. E. Fallick  P. Fenoll Hach-Alí 《Mineralogy and Petrology》2008,92(3-4):341-360

Summary The El Dorado Au-Cu deposit is located in an extensive intra-caldera zone of hydrothermal alteration affecting Upper Cretaceous andesites of the Los Elquinos Formation at La Serena (≈ 29°47′S Lat., 70°43′W Long., Chile). Quartz-sulfide veins of economic potential are hosted by N25W and N20E fault structures associated with quartz-illite alteration (+supergene kaolinite). The main ore minerals in the deposit are pyrite, chalcopyrite ± fahlore (As/(As + Sb): 0.06−0.98), with electrum, sphalerite, galena, bournonite-seligmanite (As/(As + Sb): 0.21−0.31), marcasite, pyrrhotite being accessory phases. Electrum, with an Ag content between 32 and 37 at.%, occurs interstitial to pyrite aggregates or along pyrite fractures. Pyrite commonly exhibits chemical zonation with some zones up to 1.96 at.% As. Electron probe microanalyses of pyrite indicate that As-rich zones do not exhibit detectable Au values. Fluid inclusion microthermometry shows homogenization temperatures between 130 and 352 °C and salinities between 1.6 and 6.9 wt.% NaCl eq. Isotope data for quartz, ankerite and phyllosilicates and estimated temperatures show that δ¹⁸O and δD for the hydrothermal fluids were between 3 and 10‰ and between −95 and −75‰, respectively. These results suggest the mineralizing fluids were a mixture of meteoric and magmatic waters. An epithermal intermediate-sulfidation model is proposed for the formation of the El Dorado deposit. Author’s present address: J. Carrillo-Rosúa, Dpto. de Didáctica de las Ciencias Experimentales, Universidad de Granada, Campus de Cartuja, 18071, Granada, Spain  相似文献   

Boron incorporation into mullite     

K. J. Griesser  A. Beran  D. Voll  H. Schneider 《Mineralogy and Petrology》2008,92(3-4):309-320

Summary Boron-doped mullites were synthesized using aluminium nitrate-nonahydrate, tetraethoxysilane and boric acid in a sol–gel process with subsequent annealing at 950 and 1300 °C for five hours. Two different bulk compositions with constant Al₂O₃ contents (60 and 70 mol%, respectively) and varying SiO₂ plus B₂O₃ contents were investigated. X-ray powder diffraction analyses yielded a linear decrease of the lattice parameters with increasing bulk B₂O₃ content, which was interpreted as to be due to boron incorporation. Related to the increasing boron content, corresponding infrared spectra revealed a slight and continuous shift for most of the absorption bands. These data show that mullite is able to incorporate large amounts of boron into its structure (up to about 20 mol% B₂O₃ depending on the bulk composition of the starting materials). Infrared analyses suggest that boron is incorporated into the mullite structure in form of planar three-fold coordinated BO₃ groups. Author’s address: A. Beran, Institut für Mineralogie und Kristallographie, Universit?t Wien-Geozentrum, Althanstra?e 14, 1090 Wien, Austria  相似文献   

Methodology of hydrogeological characterization of deep carbonate aquifers as potential reservoirs of groundwater. Case of study: the Jurassic aquifer of <Emphasis Type="Italic">El Maestrazgo</Emphasis> (Castellón,Spain)     

M. Mejías  J. Garcia-Orellana  J. L. Plata  M. Marina  E. Garcia-Solsona  B. Ballesteros  P. Masqué  J. López  C. Fernández-Arrojo 《Environmental Geology》2008,54(3):521-536

A methodology for the characterization of deep carbonate aquifers has been developed and applied to El Maestrazgo Jurassic aquifer in Castellón, Spain. Characterization of these aquifer formations, located at more than 300 m deep, consisted of a previous phase of compilation, analysis and synthesis of the existing information about the area, followed by a coordinated combination of different speciality studies: geology, stratigraphy, structural analysis, hydrogeology, hydrochemistry, geophysics and remote sensing. Geological studies included geological mapping, definition of stratigraphical units and facies and structural analysis. The aim of the hydrogeology study was to define aquifer formations, recharge area, aquifer points inventory and groundwater flow directions for the establishment of piezometric and water quality observation nets. Special techniques were applied, like thermal infrared aerial images and the evaluation of submarine groundwater discharge by means of natural radium isotopes. Hydrochemical techniques, including majority elements characterization and stable isotopes (¹⁸O, ²H and ³H) determination, allowed classifying hydrochemical facies and establishing a renewal pattern for water within the system. Geophysics was useful in determining the aquifer geometry, the features of the basement and the petrophysical characteristics of the geological formations. Preliminary results show an important tectonic complexity and the possibilities for groundwater uses in the area of study.  相似文献   

Implementation of reconstructed geomorphologic units in landslide susceptibility mapping: the Melen Gorge (NW Turkey)   总被引：6，自引：2，他引：4  

T. Gorum  B. Gonencgil  C. Gokceoglu  H. A. Nefeslioglu 《Natural Hazards》2008,46(3):323-351

In the international literature, although considerable amount of publications on the landslide susceptibility mapping exist, geomorphology as a conditioning factor is still used in limited number of studies. Considering this factor, the purpose of this article paper is to implement the geomorphologic parameters derived by reconstructed topography in landslide susceptibility mapping. According to the method employed in this study, terrain is generalized by the contours passed through the convex slopes of the valleys that were formed by fluvial erosion. Therefore, slope conditions before landsliding can be obtained. The reconstructed morphometric and geomorphologic units are taken into account as a conditioning parameter when assessing landslide susceptibility. Two different data, one of which is obtained from the reconstructed DEM, have been employed to produce two landslide susceptibility maps. The binary logistic regression is used to develop landslide susceptibility maps for the Melen Gorge in the Northwestern part of Turkey. Due to the high correct classification percentages and spatial effectiveness of the maps, the landslide susceptibility map comprised the reconstructed morphometric parameters exhibits a better performance than the other. Five different datasets are selected randomly to apply proper sampling strategy for training. As a consequence of the analyses, the most proper outcomes are obtained from the dataset of the reconstructed topographical parameters and geomorphologic units, and lithological variables that are implemented together. Correct classification percentage and root mean square error (RMSE) values of the validation dataset are calculated as 86.28% and 0.35, respectively. Prediction capacity of the different datasets reveal that the landslide susceptibility map obtained from the reconstructed parameters has a higher prediction capacity than the other. Moreover, the landslide susceptibility map obtained from the reconstructed parameters produces logical results.  相似文献   

Modifications of the porous network of sandstone accompanying the formation of black varnish     

C. Thomachot-Schneider  M. Gommeaux  G. Fronteau 《Environmental Geology》2008,56(3-4):571-582

Black varnish commonly develops on rain-washed fine-grained monument sandstone. Stone modifications are, to the naked eye, limited to 10-μm thick black film and underlying modified zone about 1-mm thick. Transfer properties (absorption and drying kinetics and permeability) are, however, modified several centimetres under the surface. The present study investigates the modifications of black-varnish covered siliceous sandstones taken from Alsatian monuments (East of France) and of fresh sandstone undergoing wetting–drying cycles in the laboratory. Double-coloured thin-sections revealed gradual changes in the porous network, up to 3 cm under the black varnish. SEM observations showed that the film was mainly composed of iron and phosphorus while the modified zone was rich in calcium and sulphur. Fifty capillary absorption–drying cycles were carried out on fresh sandstone. Absorption kinetics was measured at each cycle. A continuous decrease of sandstone absorption kinetics over the fifty cycles was interpreted as a reorganisation of the porous network, reducing the connectivity of the porous network although total porosity remained unchanged. Wetting–drying cycles carried out under an environmental microscope (ESEM) showed a displacement of the finest particles (clay clusters), filling the macroporosity and decreasing the connectivity.  相似文献   

High‐pressure metamorphism in Taiwan: from oceanic subduction to arc‐continent collision?     

O. Beyssac  F. Negro  M. Simoes  Y. C. Chan  Y. G. Chen 《地学学报》2008,20(2):118-125

Abstract The Taiwan orogen has been the focus of a number of models of mountain building processes, but little attention has been paid to high‐pressure (HP) metamorphic rocks that are found as exotic blocks intermingled within the deepest units of the mountain belt. In this study, we re‐appraise from updated petrological and thermodynamic databases the physical conditions of HP metamorphism in Taiwan, and we combine our findings with available geochronological data to estimate the thermal history of these rocks. Our results indicate that peak metamorphic conditions of ～550 °C and 10–12 kbar have been followed by a rapid isothermal decompression, with exhumation possibly as rapid as burial. These units have subsequently been stored at a pressure of ～3 kbar for ～4–5 Myr, before their final exhumation, probably facilitated by the accretion of passive margin sequences during the Late Cenozoic collision. Therefore, HP units in Taiwan maintain a record of processes at depth from the early stages of oceanic subduction to the present arc‐continent collision.  相似文献   

Nonlinear Analysis of Local Site Effects on Seismic Ground Response in the Bam Earthquake   总被引：1，自引：0，他引：1  

M. H. T. Rayhani  M. H. El Naggar  S. H. Tabatabaei 《Geotechnical and Geological Engineering》2008,26(1):91-100

The influence of local geologic and soil conditions on the intensity of ground shaking is addressed in this study. The amplification of the ground motion due to local site effects resulted in severe damage to dwellings in the Bam area during the 2003 Bam Earthquake. A unique set of strong motion acceleration recordings was obtained at the Bam accelerograph station. Although the highest peak ground acceleration recorded was the vertical component (nearly 1 g), the longitudinal component (fault-parallel motion) clearly had the largest maximum velocity as well as maximum ground displacement. Subsurface geotechnical and geophysical (down-hole) data in two different sites have been obtained and used to estimate the local site condition on earthquake ground motion in the area. The ground response analyses have been conducted considering the nonlinear behavior of the soil deposits using both equivalent linear and nonlinear approaches. The fully nonlinear method embodied in FLAC was used to evaluate the nonlinear soil properties on earthquake wave propagation through the soil layer, and compare with the response from the equivalent linear approach. It is shown that thick alluvium deposits amplified the ground motion and resulted in significant damage in residential buildings in the earthquake stricken region. The comparison of results indicated similar response spectra of the motions for both equivalent and nonlinear analyses, showing peaks in the period range of 0.3–1.5 s. However, the amplification levels of nonlinear analysis were less than the equivalent linear method especially in long periods. The observed response spectra are shown to be above the NEHRP building code design requirements, especially at high frequencies.  相似文献   

Analysis of the 2003 Varunawat Landslide,Uttarkashi, India using Earth Observation data     

K. Vinod kumar  R. C. Lakhera  Tapas R. Martha  R. S. Chatterjee  A. Bhattacharya 《Environmental Geology》2008,55(4):789-799

Mass movements such as landslides in mountainous terrains are natural degradation processes and one of the most important landscape-building factors. Varunawat Parbat overlooking Uttarkashi town witnessed a series of landslides on 23 September 2003 and the debris slides and rock falls continued for 2 weeks. This landslide complex was triggered due to the incessant rainfall prior to the event, and its occurrence led to the blockage of the pilgrim route to Gangotri (source of the Ganges river) and evacuation of thousands of people to safer places. Though there was no loss of lives due to timely evacuation, heavy losses to the property were reported. High-resolution stereoscopic earth observation data were acquired after the incidence to study the landslide in detail with emphasis on the cause of the landslide and mode of failure. Areas along the road and below the Varunawat foothill region are mapped for landslide risk. It was found that the foothill region of the Varunawat Parbat was highly disturbed by man-made activities and houses are dangerously located below steep slopes. The potential zones for landslides along with the existing active and old landslides are mapped. These areas are critical and their treatment with priority is required in order to minimise further landslide occurrences.  相似文献   

铁同位素的MC-ICP-MS测定方法与地质标准物质的铁同位素组成   总被引：22，自引：5，他引：17  

朱祥坤  李志红  赵新苗  唐索寒  何学贤  Nick S. Belshaw 《岩石矿物学杂志》2008,27(4):263-272

详细报道了在低分辨和高分辨模式下运用MC-ICP-MS进行Fe同位素比值高精度测试的方法,对Fe同位素测定过程中谱峰干扰、基质效应、浓度效应、仪器测试的长期重现性等问题进行了评估,并对两种运行模式的测试结果进行了对比.在95%的可信度范围内,所建方法的外部精度优于0.5ε/ainu,达到国际同类实验室的先进水平,并且低分辨和高分辨两种模式下获得的Fe同位素测试结果是一致的.在此基础上对国家地质标准物质GBW07105(玄武岩)和GBW 07111(花岗闪长岩)进行了Fe同位素测定.相对于Fe同位素国际标样IRMM-014,GBW07105的Fe同位素成分为:ε57Fe=1.9±0.3(20),ε56Fe=1.3±0.2(2σ),ε57/56Fe=0.6±0.1(2σ);GBW 07111的Fe同位素成分为:ε57Fe=1.8±0.4(2σ),ε56Fe=1.2±0.2(2σ),ε57/56Fe=0.6±0.1(2σ).  相似文献   

饱和粉砂不稳定性的试验研究   总被引：3，自引：0，他引：3  

符新军  赵仲辉 《岩土力学》2008,29(2):381-385

通过对净砂和级配良好粉砂(含10 %粉土)进行一系列三轴固结不排水试验（CU）,研究了粉土、孔隙比和围压对饱和粉砂不稳定性的影响。试验结果表明,净砂与粉砂在不排水剪切条件下均会出现应变软化现象（即不稳定性）。同一围压下脆性指数(IB)随孔隙比增加,但不稳定线的应力比随孔隙比增加而减小。引用等效粒间孔隙比(ege)后,净砂和粉砂在ege-ln p?平面上拥有基本相同的临界状态线。在临界状态理论及等效粒间孔隙比的基础上,提出在同一修正状态参数(?ge)下净砂和级配良好粉砂有相似的不稳定性。  相似文献