Random vibration of nonlinear structures with stiffness and strength deterioration by modified tail equivalent linearization method     

Raoufi  Reza  Ghafory-Ashtiany  Mohsen 《地震工程与工程振动(英文版)》2019,18(3):597-610

In this research the tail equivalent linearization method(TELM) has been extended to study structures with degrading materials. The responses of such structures to excitations are non-stationary, even if the excitations are stationary. Non-stationary behavior of the system cannot be considered by conventional TELM. Applying the conventional TELM, the only distinction in the design point excitation for two stationary excitations with different durations is in the addition of a zero value part at the beginning of the design point of the longer excitation. This means that the failure probability is the same for the non-stationary systems under excitations with different durations. Therefore, this solution cannot be correct. In this study, in using TELM for systems with degrading materials, hysteretic energy is replaced by average hysteretic energy, calculated by averaging the obtained hysteretic energy of the structure subjected to a few random sample load realization. In this way, the degradation parameters under design point coincide with those under sample load realizations. Since the average of the hysteretic energy is converges very fast, the modified TELM only requires about tens to hundreds solutions of the response in addition to the ordinary calculations of conventional TELM.  相似文献   

A new boundary element solution to evaluate the geometric effects of the canyon site on the displacement response spectrum     

Tarinejad  Reza  Isari  Mohsen  Taghavi Ghalesari  Abbasali 《地震工程与工程振动(英文版)》2019,18(2):267-284

This paper presents a step-by-step procedure using the three-dimensional boundary element approach to study the behavior of semi-circular canyons under seismic shear waves. The boundary element code TDASC allows utilization for various canyon geometries, evaluation of concurrent seismic waves and calculation of the ground motions on canyons due to an excitation at any arbitrary point of the incident field. Considering the widening ratio of the canyon(including prismatic, semi-prismatic and non-prismatic canyons), wave characteristics(wavelength, dimensionless period, direction) and maximum amplification pattern, the solution was applied to carry out a series of parametric studies. It was shown that canyon form can significantly affect the displacement amplification, especially at the points located on its edges. By increasing the wave dimensionless frequency(η 1), the amplification pattern becomes more complex. On the basis of the results from a variety of considered cases, a new expression has been presented for the limiting wavelength beyond which the widening of the canyon will not have a major effect on the displacement amplification. To verify the reliability of the proposed approach, the obtained results, expressed in terms of displacement amplitude, were compared with those from the available published literature and a reasonably good agreement was observed.  相似文献   

Spatial and Temporal Distribution of Dust‐Bound Trace Metal Elements around Kuhdasht Watershed Area in Iran     

Hamid Alipour  Ahmad Jalalian  Naser Honarjoo  Norair Tommanian  Fereidoon Sarmadian 《洁净——土壤、空气、水》2019,47(10)

Dust, as a source of trace metal elements, affects the health of society. The spatial and temporal concentrations of dust‐bound trace metals (Cd, Pb, Ni, Zn, Cu, and Mn) in Kuhdasht watershed (456 km²), Lorestan Province, Iran, is investigated. Dust is collected using glass traps placed in ten research stations in the region. The spatial and temporal distribution of dust trace metals are plotted using ARC‐GIS. The highest and the lowest concentrations of Zn (9751150 mg kg^?1), Pb (46.352.9 mg kg^?1), and Cd (2.443.30 mg kg^?1) are obtained in winter, of Ni (98110 mg kg^?1) and Cu in autumn (16.053.5 mg kg^?1), and of Mn in summer (385505 mg kg^?1). The spatial concentrations of dust‐bound trace metals indicate all, except Cu, show a decreasing trend from the mountains toward the plains, similar to that of soil and of dust, except for Zn, which shows higher concentrations in dust than in soil. The potential sources of dust‐bound trace metals and their rate of contamination are also investigated using the enrichment and contamination factors. The major sources of Cd and Zn in the dust of watershed are due to anthropogenic activities or from activities outside the borders.  相似文献   

Static and dynamic analysis on slope stability using a DFN-DEM approach on the right abutment of the Karun 4 dam     

Kefayati  Sadegh  Baghbanan  Alireza  Torkan  Masoud  Hashemolhosseini  Hamid  Dehnavi  Roohollah Narimani 《地震工程与工程振动(英文版)》2020,19(4):937-951

Uncertainty in input fracture geometric parameters during analysis of the stability of jointed rock slopes is inevitable and therefore the stochastic discrete fracture network (DFN) — distinct element method (DEM) is an efficient modeling tool. In this research, potentially unstable conditions are detected in the right abutment of the Karun 4 dam and downstream of the dam body as a case study. Two extreme states with small and relatively large block sizes are selected and a series of numerical DEM models are generated using a number of validated DFN models. Stability of the rock slope is assessed in both static and dynamic loading states. Based on the design basis earthquake (DBE) and maximum credible earthquake (MCE) expected in the dam site, histories of seismic waves are applied to analyze the stability of the slope in dynamic earthquake conditions. The results indicate that a MCE is likely to trigger sliding of rock blocks on the rock slope major joint. Furthermore, the dynamic analysis also shows a local block failure by the DBE, which can consequently lead to slope instability over the long term. According to the seismic behavior of the two models, larger blocks are prone to greater instability and are less safe against earthquakes.

  相似文献   

Runoff quality prediction from small urban catchments using SWMM     

Vassilios A. Tsihrintzis  Rizwan Hamid 《水文研究》1998,12(2):311-329

The RUNOFF block of EPA's storm water management model (SWMM) was used to simulate the quantity and quality of urban storm water runoff from four relatively small sites (i.e. 5·97–23·56 ha) in South Florida, each with a specific predominant land use (i.e. low density residential, high density residential, highway and commercial). The objectives of the study were to test the applicability of this model in small subtropical urban catchments and provide modellers with a way to select appropriate input parameters to be used in planning studies. A total of 58 storm events, measured by the US Geological Survey (USGS), provided hyetographs, hydrographs and pollutant loadings for biological oxygen demand (BOD₅), total suspended solids (TSS), total Kjeldahl nitrogen (TKN) and lead (Pb), and were used for calibration of the model. Several other catchment characteristics, also measured or estimated by USGS, were used in model input preparation. Application of the model was done using the Green–Ampt equation for infiltration loss computation, a pollutant accumulation equation using a power build-up equation dependent on the number of dry days, and a power wash-off equation dependent on the predicted runoff rate. Calibrated quantity input parameters are presented and compared with suggested values in the literature. The impervious depression storage was generally found to be the most sensitive calibration parameter, followed by the Manning's roughness coefficients of conduit and overland flow, the Green–Ampt infiltration parameters and, finally, the pervious depression storage. Calibrated quality input parameters are presented in the form of regression equations, as a function of rainfall depth and the number of antecedent dry days. A total of 16 independent rainfall events were used for verification of the model, which showed a good comparison with observed data for both hydrographs and pollutant loadings. Average model predictions for the four constituent concentrations from the verification runs also showed good agreement with NURP published values in Florida and US sites. © 1998 John Wiley & Sons, Ltd.  相似文献   

The relationship among environmental variables,jellyfish and non‐gelatinous zooplankton: A case study in the north of the Gulf of Oman          下载免费PDF全文

Fatemeh Pourjomeh  Mohammad Reza Shokri  Hamid Rezai  Hassan Rajabi‐Maham  Elham Maghsoudlou 《Marine Ecology》2017,38(6)

Processes underlying the temporal and spatial variations observed in the distribution of jellyfish and non‐gelatinous zooplankton in the Gulf of Oman are not well understood. This information gap is clearly a major issue in controlling the harmful blooms of jellyfish and non‐gelatinous zooplankton. Samples of jellyfish and non‐gelatinous zooplankton were collected from six stations in Chabahar Bay and three stations in Pozm Bay within four seasons. At each station, environmental variables were also recorded from bottom and surface water. A total of 83 individuals of medusae representing four species of Scyphozoa (i.e., Cyanea nozakii, Chrysaora sp., Pelagia noctiluca, Catostylus tagi) and species of Hydrozoa (i.e., Diphyes sp., Rhacostoma sp., Aequorea spp.) were observed in the study area. A total of 70,727.25 individuals/m^?3 of non‐gelatinous zooplankton dominated by copepods and cladocerans were collected in nine stations within the four seasons. The results of a RELATE analysis yielded no significant association between species composition for jellyfish and non‐gelatinous zooplankton. Among environmental variables, water transparency, nitrite concentration, water depth and temperature were better associated with the total variation in jellyfish species composition than with that of non‐gelatinous zooplankton. Dissolved oxygen, pH, and phosphate concentration were significant environmental variables associated with the variation in the spatial and temporal distribution patterns of non‐gelatinous zooplankton assemblages. Although some jellyfish species (i.e., Rhacostoma sp., Pelagia noctiluca, Catostylus tagi) occur independently of non‐gelatinous zooplankton assemblages, other jellyfish (i.e., Chrysaora sp., Aequorea spp., Cyanea nozakii, Diphyes sp.) are strongly correlated with non‐gelatinous zooplankton assemblages.  相似文献   

Investigation on the Effect of Geometrical and Geotechnical Parameters on Elongated Offshore Piles Using Fuzzy Inference Systems     

Ali AMINFAR  Alireza MOJTAHEDI  Hamid AHMADI  Mohammad Hossain AMINFAR 《海洋工程》2017,31(3):378-388

Among numerous offshore structures used in oil extraction, jacket platforms are still the most favorable ones in shallow waters. In such structures, log piles are used to pin the substructure of the platform to the seabed. The pile’s geometrical and geotechnical properties are considered as the main parameters in designing these structures. In this study, ANSYS was used as the FE modeling software to study the geometrical and geotechnical properties of the offshore piles and their effects on supporting jacket platforms. For this purpose, the FE analysis has been done to provide the preliminary data for the fuzzy-logic post-process. The resulting data were implemented to create Fuzzy Inference System (FIS) classifications. The resultant data of the sensitivity analysis suggested that the orientation degree is the main factor in the pile’s geometrical behavior because piles which had the optimal operational degree of about 5° are more sustained. Finally, the results showed that the related fuzzified data supported the FE model and provided an insight for extended offshore pile designs.  相似文献   

Effect of Silica Fume on Compressive Strength of Oil-Polluted Concrete in Different Marine Environments     

Hamid SHAHRABADI  Sina SAYAREH  Hamed SARKARDEH 《海洋工程》2017,(6):716-723

In the present research, effect of silica fume as an additive and oil polluted sands as aggregates on compressive strength of concrete were investigated experimentally. The amount of oil in the designed mixtures was assumed to be constant and equal to 2% of the sand weight. Silica fume accounting for 10%, 15% and 20% of the weight is added to the designed mixture. After preparation and curing, concrete specimens were placed into the three different conditions: fresh, brackish and saltwater environments (submerged in fresh water, alternation of exposed in air & submerged in sea water and submerged in sea water). The result of compressive strength tests shows that the compressive strength of the specimens consisting of silica fume increases significantly in comparison with the control specimens in all three environments. The compressive strength of the concrete with 15% silica fume content was about 30% to 50% higher than that of control specimens in all tested environments under the condition of using polluted aggregates in the designed mixture.  相似文献   

Application of the coral health chart to determine bleaching status of <Emphasis Type="Italic">Acropora downingi</Emphasis> in a subtropical coral reef     

Mahshid Oladi  Mohammad Reza Shokri  Hassan Rajabi-Maham 《Ocean Science Journal》2017,52(2):267-275

The ‘Coral Health Chart’ has become a popular tool for monitoring coral bleaching worldwide. The scleractinian coral Acropora downingi (Wallace 1999) is highly vulnerable to temperature anomalies in the Persian Gulf. Our study tested the reliability of Coral Health Chart scores for the assessment of bleaching-related changes in the mitotic index (MI) and density of zooxanthellae cells in A. downingi in Qeshm Island, the Persian Gulf. The results revealed that, at least under severe conditions, it can be used as an effective proxy for detecting changes in the density of normal, transparent, or degraded zooxanthellae and MI. However, its ability to discern changes in pigment concentration and total zooxanthellae density should be viewed with some caution in the Gulf region, probably because the high levels of environmental variability in this region result in inherent variations in the characteristics of zooxanthellae among “healthy” looking corals.  相似文献   

A unified formulation for generalized oilfield development optimization     

Shiva Navabi  Reza Khaninezhad  Behnam Jafarpour 《Computational Geosciences》2017,21(1):47-74

Oilfield development involves several key decisions, including the number, type (injection/production), location, drilling schedule, and operating control trajectories of the wells. Without considering the coupling between these decision variables, any optimization problem formulation is bound to find suboptimal solutions. This paper presents a unified formulation for oilfield development optimization that seeks to simultaneously optimize these decision variables. We show that the source/sink term of the governing multiphase flow equations includes all the above decision variables. This insight leads to a novel and unified formulation of the field development optimization problem that considers the source/sink term in reservoir simulation equations as optimization decision variables. Therefore, a single optimization problem is formulated to simultaneously search for optimal decision variables by determining the complete dynamic form of the source/sink terms. The optimization objective function is the project net present value (NPV), which involves discounted revenue from oil production, operating costs (e.g. water injection and recycling), and capital costs (e.g., cost of drilling wells). A major difficulty after formulating the generalized field development optimization problem is finding an efficient solution approach. Since the total number of cells in a reservoir model far exceeds the number of cells that are intersected by wells, the source/sink terms tend to be sparse. In fact, the drilling cost in the NPV objective function serves as a sparsity-promoting penalty to minimize the number of wells while maximizing the NPV. Inspired by this insight, we solve the optimization problem using an efficient gradient-based method based on recent algorithmic developments in sparse reconstruction literature. The gradients of the NPV function with respect to the source/sink terms is readily computed using well-established adjoint methods. Numerical experiments are presented to evaluate the feasibility and performance of the generalized field development formulation for simultaneous optimization of the number, location, type, controls, and drilling schedule of the wells.  相似文献