Rainfall-induced shallow landslides caused by ex-Tropical Cyclone Debbie, 31st March 2017     

Jacob Cogan  Ivan Gratchev  Gonghui Wang 《Landslides》2018,15(6):1215-1221

Every year, Australia experiences tropical cyclones that bring large amounts of rainfall, causing flooding and damage to infrastructure and road closure due to landslips. In March 2017, tropical cyclone Debbie hit the Queensland coast dumping 747 mm of rainfall within 2 days to the Gold Coast region. As a result, multiple shallow landslides occurred in Gold Coast and northern New South Wales due to the increase in soil saturation. A field investigation was conducted from several sites between Gold Coast-Springbrook road and Tallebudgera creek road to identify geological settings and landslide characteristics. Key findings show that slides predominantly occurred in weathered meta-sediments of the Neranleigh-Fernvale Beds within a depth of 1–2 m. Furthermore, a series of shear box tests revealed that the shear strength of the soil significantly decreased when saturation occurred.  相似文献   

Factors controlling the morphology and volume (V)–length (L) relations of permanent gullies in the northern Ethiopian Highlands     

Amaury Frankl  Jean Poesen  Nelles Scholiers  Miró Jacob  Mitiku Haile  Jozef Deckers  Jan Nyssen 《地球表面变化过程与地形》2013,38(14):1672-1684

Small‐scale aerial photographs and high‐resolution satellite images, available for Ethiopia since the second half of the twentieth century as for most countries, allow only the length of gullies to be determined. Understanding the development of gully volumes therefore requires that empirical relations between gully volume (V) and length (L) are established in the field. So far, such V–L relations have been proposed for a limited number of gullies/environments and were especially developed for ephemeral gullies. In this study, V–L relations were established for permanent gullies in northern Ethiopia, having a total length of 152 km. In order to take the regional variability in environmental characteristics into account, factors that control gully cross‐sectional morphology were studied from 811 cross‐sections. This indicated that the lithology and the presence of check dams or low‐active channels were the most important controls of gully cross‐sectional shape and size. Cross‐sectional size could be fairly well predicted by their drainage area. The V–L relation for the complete dataset was V = 0 · 562 L ^1·381 (n = 33, r² = 0 · 94, with 34 · 9% of the network having check dams and/or being low‐active). Producing such relations for the different lithologies and percentages of the gully network having check dams and/or being low‐active allows historical gully development from historical remote sensing data to be assessed. In addition, gully volume was also related to its catchments area (A) and catchment slope gradient (S_c). This study demonstrates that V–L and V–A × S_c relations can be very suitable for planners to assess gully volume, but that the establishment of such relations is necessarily region‐specific. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Multi-stage Ag–Bi–Co–Ni–U and Cu–Bi vein mineralization at Wittichen,Schwarzwald, SW Germany: geological setting,ore mineralogy,and fluid evolution     

Sebastian?Staude  Wolfgang?Werner  Teresa?Mordhorst  Klaus?Wemmer  Dorrit?E.?Jacob  Gregor?MarklEmail author 《Mineralium Deposita》2012,47(3):251-276

The Wittichen Co–Ag–Bi–U mining area (Schwarzwald ore district, SW Germany) hosts several unconformity-related vein-type mineralizations within Variscan leucogranite and Permian to Triassic redbeds. The multistage mineralization formed at the intersection of two fault systems in the last 250 Ma. A Permo-Triassic ore stage I with minor U–Bi–quartz–fluorite mineralization is followed by a Jurassic to Cretaceous ore stage II with the main Ag and Co mineralization consisting of several generations of gangue minerals that host the sub-stages of U–Bi, Bi–Ag, Ni–As–Bi and Co–As–Bi. Important ore minerals are native elements, Co and Ni arsenides, and pitchblende; sulphides are absent. The Miocene ore stage III comprises barite with the Cu–Bi sulfosalts emplectite, wittichenite and aikinite, and the sulphides anilite and djurleite besides native Bi, chalcopyrite, sphalerite, galena and tennantite. The mineral-forming fluid system changed from low salinity (<5 wt.% NaCl) at high temperature (around 300°C) in Permian to highly saline (around 25 wt.% NaCl + CaCl₂) at lower temperatures (50–150°C) in Triassic to Cretaceous times. Thermodynamic calculations and comparison with similar mineralizations worldwide show that the Mesozoic ore-forming fluid was alkaline with redox conditions above the hematite–magnetite buffer. We suggest that the precipitation mechanism for native elements, pitchblende and arsenides is a decrease in pH during fluid mixing processes. REE patterns in fluorite and the occurrence of Bi in all stages suggest a granitic source of some ore-forming elements, whereas, e.g. Ag, Co and Ni probably have been leached from the redbeds. The greater importance of Cu and isotope data indicates that the Miocene ore stage III is more influenced by fluids from the overlying redbeds and limestones than the earlier mineralization stages.  相似文献   

Submarine channel initiation,filling and maintenance from sea‐floor geomorphology and morphodynamic modelling of cyclic steps     

Jacob A. Covault  Svetlana Kostic  Charles K. Paull  Holly F. Ryan  Andrea Fildani 《Sedimentology》2014,61(4):1031-1054

Advances in acoustic imaging of submarine canyons and channels have provided accurate renderings of sea‐floor geomorphology. Still, a fundamental understanding of channel inception, evolution, sediment transport and the nature of the currents traversing these channels remains elusive. Herein, Autonomous Underwater Vehicle technology developed by the Monterey Bay Aquarium Research Institute provides high‐resolution perspectives of the geomorphology and shallow stratigraphy of the San Mateo canyon‐channel system, which is located on a tectonically active slope offshore of southern California. The channel comprises a series of crescent‐shaped bedforms in its thalweg. Numerical modelling is combined with interpretations of sea‐floor and shallow subsurface stratigraphic imagery to demonstrate that these bedforms are likely to be cyclic steps. Submarine cyclic steps compose a morphodynamic feature characterized by a cyclic series of long‐wave, upstream‐migrating bedforms. The bedforms are cyclic steps if each bedform in the series is bounded by a hydraulic jump in an overriding turbidity current, which is Froude‐supercritical over the lee side of the bedform and Froude‐subcritical over the stoss side. Numerical modelling and seismic‐reflection imagery support an interpretation of weakly asymmetrical to near‐symmetrical aggradation of predominantly fine‐grained net‐depositional cyclic steps. The dominant mode of San Mateo channel maintenance during the Holocene is interpreted to be thalweg reworking into aggrading cyclic steps by dilute turbidity currents. Numerical modelling also suggests that an incipient, proto‐San Mateo channel comprises a series of relatively coarse‐grained net‐erosional cyclic steps, which nucleated out of sea‐floor perturbations across the tectonically active lower slope. Thus, the interaction between turbidity‐current processes and sea‐floor perturbations appears to be fundamentally important to channel initiation, particularly in high‐gradient systems. Offshore of southern California, and in analogous deep‐water basins, channel inception, filling and maintenance are hypothesized to be strongly linked to the development of morphodynamic instability manifested as cyclic steps.  相似文献   

Constraining input and output fluxes of the southern-central Chile subduction zone: water,chlorine and sulfur     

David Völker  Heidi Wehrmann  Steffen Kutterolf  Karthik Iyer  Wolfgang Rabbel  Jacob Geersen  Kaj Hoernle 《International Journal of Earth Sciences》2014,103(7):2129-2153

In this paper, we constrain the input and output fluxes of H₂O, Cl and S into the southern-central Chilean subduction zone (31°S–46°S). We determine the input flux by calculating the amounts of water, chlorine and sulfur that are carried into the subduction zone in subducted sediments, igneous crust and hydrated lithospheric mantle. The applied models take into account that latitudinal variations in the subducting Nazca plate impact the crustal porosity and the degree of upper mantle serpentinization and thus water storage in the crust and mantle. In another step, we constrain the output fluxes of the subduction zone both to the subcontinental lithospheric mantle and to the atmosphere–geosphere–ocean by the combined use of gas flux determinations at the volcanic arc, volume calculations of volcanic rocks and the combination of mineralogical and geothermal models of the subduction zone. The calculations indicate that about 68 Tg/m/Ma of water enters the subduction zone, as averaged over its total length of 1,480 km. The volcanic output on the other hand accounts for 2 Tg/m/Ma or 3 % of that input. We presume that a large fraction of the volatiles that are captured within the subducting sediments (which accounts for roughly one-third of the input) are cycled back into the ocean through the forearc. This assumption is however questioned by the present lack of evidence for major venting systems of the submarine forearc. The largest part of the water that is carried into the subduction zone in the crust and hydrated mantle (accounting for two-thirds of the input) appears to be transported beyond the volcanic arc.  相似文献   

Morphology and geology of the continental shelf and upper slope of southern Central Chile (33°S–43°S)     

David Völker  Jacob Geersen  Eduardo Contreras-Reyes  Javier Sellanes  Silvio Pantoja  Wolfgang Rabbel  Martin Thorwart  Christian Reichert  Martin Block  Wilhelm Reimer Weinrebe 《International Journal of Earth Sciences》2014,103(7):1765-1787

The continental shelf and slope of southern Central Chile have been subject to a number of international as well as Chilean research campaigns over the last 30 years. This work summarizes the geologic setting of the southern Central Chilean Continental shelf (33°S–43°S) using recently published geophysical, seismological, sedimentological and bio-geochemical data. Additionally, unpublished data such as reflection seismic profiles, swath bathymetry and observations on biota that allow further insights into the evolution of this continental platform are integrated. The outcome is an overview of the current knowledge about the geology of the southern Central Chilean shelf and upper slope. We observe both patches of reduced as well as high recent sedimentation on the shelf and upper slope, due to local redistribution of fluvial input, mainly governed by bottom currents and submarine canyons and highly productive upwelling zones. Shelf basins show highly variable thickness of Oligocene-Quaternary sedimentary units that are dissected by the marine continuations of upper plate faults known from land. Seismic velocity studies indicate that a paleo-accretionary complex that is sandwiched between the present, relatively small active accretionary prism and the continental crust forms the bulk of the continental margin of southern Central Chile.  相似文献   

Application of a hydrometeorological model chain to investigate the effect of global boundaries and downscaling on simulated river discharge     

T. Marke  W. Mauser  A. Pfeiffer  G. Zängl  D. Jacob  U. Strasser 《Environmental Earth Sciences》2014,71(11):4849-4868

In the current study, two regional climate models (MM5 and REMO) driven by different global boundary conditions (the ERA40 reanalysis and the ECHAM5 model) are one-way coupled to the uncalibrated hydrological process model PROMET to analyze the impact of global boundary conditions, dynamical regionalization and subsequent statistical downscaling (bilinear interpolation, correction of subgrid-scale variability and combined correction of subgrid-scale variability and bias) on river discharge simulation. The results of 12 one-way coupled model runs, set up for the catchment of the Upper Danube (Central Europe) over the historical period 1971–2000, prove the expectation that the global boundaries applied to force the RCMs strongly influence the accuracy of simulated river discharge. It is, however, noteworthy that all efficiency criteria in case of bias corrected MM5 simulations indicate better performance under ERA40 boundaries, whereas REMO-driven hydrological simulations better correspond to measured discharge under ECHAM5 boundaries. Comparing the hydrological results achievable with MM5 and REMO, the application of bias-corrected MM5 simulations turned out to allow for a more accurate simulation of discharge, while the variance in simulated discharge in most cases was better reflected in case of REMO forcings. The correction of subgrid-scale variability within the downscaling of RCM simulations compared to a bilinear interpolation allows for a more accurate simulation of discharge for all model configurations and all discharge criteria considered (mean monthly discharge, mean monthly low-flow and peak-flow discharge). Further improvements in the hydrological simulations could be achieved by eliminating the biases (in terms of deviations from observed meteorological conditions) inherent in the driving RCM simulations, regardless of the global boundary conditions or the RCM applied. In spite of all downscaling and bias correction efforts described, the RCM-driven hydrological simulations remain less accurate than those achievable with spatially distributed meteorological observations.  相似文献   

The Australia telescope 20 GHz survey: hardware, observing strategy, and scanning survey catalog     

Paul Jacob Hancock  Paul Roberts  Michael J. Kesteven  Ronald D. Ekers  Elaine M. Sadler  Tara Murphy  Marcella Massardi  Roberto Ricci  Mark Calabretta  Gianfranco de Zotti  Philip G. Edwards  Jennifer A. Ekers  Carole A. Jackson  Mark Leach  Chris Phillips  Robert J. Sault  Lister Staveley-Smith  Ravi Subrahmanyan  Mark A. Walker  Warwick E. Wilson 《Experimental Astronomy》2011,32(2):147-177

The Australia Telescope 20 GHz (AT20G) survey is a large area (2?? sr), sensitive (40 mJy), high frequency (20 GHz) survey of the southern sky. The survey was conducted in two parts: an initial fast scanning survey, and a series of more accurate follow-up observations. The follow-up survey catalog has been presented by Murphy et al. (MNRAS 402:2403, 2010). In this paper we discuss the hardware setup and scanning survey strategy as well as the production of the scanning survey catalog.  相似文献   

New Reference Materials,Analytical Procedures and Data Reduction Strategies for Sr Isotope Measurements in Geological Materials by LA-MC-ICP-MS     

Jacob Mulder  Graham Hagen-Peter  Teresa Ubide  Rasmus Andreasen  Ellen Kooijman  Melanie Kielman-Schmitt  Yue-Xing Feng  Bence Paul  Andreas Karlsson  Christian Tegner  Charles Lesher  Fidel Costa 《Geostandards and Geoanalytical Research》2023,47(2):311-336

Laser ablation multi-collector mass spectrometry (LA-MC-ICP-MS) has emerged as the technique of choice for in situ measurements of Sr isotopes in geological minerals. However, the method poses analytical challenges and there is no widely adopted standardised approach to collecting these data or correcting the numerous potential isobaric inferences. Here, we outline practical analytical procedures and data reduction strategies to help establish a consistent framework for collecting and correcting Sr isotope measurements in geological materials by LA-MC-ICP-MS. We characterise a new set of plagioclase reference materials, which are available for distribution to the community, and present a new data reduction scheme for the Iolite software package to correct isobaric interferences for different materials and analytical conditions. Our tests show that a combination of Kr-baseline subtraction, Rb-peak-stripping using βRb derived from a bracketing glass reference material, and a CaCa or CaAr correction for plagioclase and CaCa or CaAr + REE²⁺ correction for rock glasses, yields the most accurate and precise ⁸⁷Sr/⁸⁶Sr measurements for these materials. Using the analytical and correction procedures outlined herein, spot analyses using a beam diameter of 100 μm or rastering with a 50–65 μm diameter beam can readily achieve < 100 ppm 2SE repeatability ("internal") precision for ⁸⁷Sr/⁸⁶Sr measurements for materials with < 1000 μg g^-1 Sr.  相似文献