Re-Os Isotopic Measurements at the Femtomole Level in Natural Samples   总被引：17，自引：0，他引：17  

Jean Louis Birck  Matthieu Roy Barman  Françoise Capmas 《Geostandards and Geoanalytical Research》1997,21(1):19-27

Here we describe a new chemical separation method for Os and an improved mass spectrometric procedure for Re and Os. This technique is based on the selective extraction of OsO₄ from aqueous solution in liquid bromine. Among other advantages, this procedure avoids the cumbersome distillation procedure for Os and uses only commercial "off the shelf" PFA teflon labware. Blank levels for 0.5 g sample sizes are: 0.06 pg and 0.5 pg for Os and Re respectively. Samples containing as little as 1 pg g⁻¹ Os can be analysed reliably with this method. Adaptation to other dissolution methods is also discussed.  相似文献   

CURRENT GEOSCIENCE LABORATORIES GEOANALYTICAL PROGRAMS AND THEIR QUALITY ASSURANCE UNDERPINNINGS     

Jean M. RICHARDSON  Peter C. LIGHTFOOT  Hugh de  SOUZA 《Geostandards and Geoanalytical Research》1996,20(1):141-156

  相似文献   

Solar modulation of cosmogenic nuclide production over the last millennium: comparison between C and Be records     

Edouard Bard  Grant M. Raisbeck  Franoise Yiou  Jean Jouzel 《Earth and Planetary Science Letters》1997,150(3-4):453-462

For about the last 30 years it has been recognized that the high frequency component of the tree rings ¹⁴C/¹²C record is dominated by the modulation of the cosmic ray flux by the solar wind. In particular, it has been demonstrated that the three most recent periods of low sunspot occurrence were characterized by high values of atmospheric ¹⁴C/¹²C. During the last millennium other periods of high ¹⁴C/¹²C values were observed but their solar origin is still debatable. In the present work we compare these fluctuations with an independent record of cosmogenic ¹⁰Be measured in ice from the South Pole to check the solar origin of the observed ¹⁴C/¹²C variations. In order to compare quantitatively the results obtained on ¹⁰Be and ¹⁴C, it is necessary to take into account the different behaviour of these two cosmogenic isotopes, and especially the damping effect of the carbon cycle in the case of ¹⁴C. As an input to a 12-box numerical model we used the relative fluctuations of the ¹⁰Be concentrations record measured in South Pole ice and converted it into a synthetic ¹⁴C record. We took into account the fact that ¹⁰Be modulation is enhanced in polar regions due to the orientation of the geomagnetic field. As expected, the fluctuations of the modelled ¹⁴C record are much smaller (a factor of 20) than those observed for the raw ¹⁰Be record. In addition, the variations are smoother and shifted in time by a few decades. The ¹⁰Be-based ¹⁴C variations closely resemble the ¹⁴C measurements obtained on tree rings (R = 0.81). In particular, it is easy to identify periods of maximal ¹⁴C/¹²C which correspond to solar activity minima centred at about 1060, 1320 (Wolf), 1500 (Spörer), 1690 (Maunder) and 1820 (Dalton) yr A.D. Cross-correlation calculations suggest that there is no significant lag between the ¹⁰Be-based ¹⁴C and the tree-ring ¹⁴C records. Our study strongly suggests the dominance of the solar modulation on the cosmonuclide production variations during the last millennium.  相似文献   

Tectonic evolution of the Lachlan Fold Belt, southeastern Australia: constraints from coupled numerical models of crustal deformation and surface erosion driven by subduction of the underlying mantle     

Jean Braun  Cristina Pauselli 《Physics of the Earth and Planetary Interiors》2004,141(4):281-301

We have used a coupled thermo-mechanical finite-element (FE) model of crustal deformation driven by mantle/oceanic subduction to demonstrate that the tectonic evolution of the Lachlan Fold Belt (LFB) during the Mid-Palaeozoic (Late Ordovician to Early Carboniferous) can be linked to continuous subduction along a single subduction zone. This contrasts with most models proposed to date which assume that separate subduction zones were active beneath the western, central and eastern sections of the Lachlan Orogen. We demonstrate how the existing data on the structural, volcanic and erosional evolution of the Lachlan Fold Belt can be accounted for by our model. We focus particularly on the timing of fault movement in the various sectors of the orogen. We demonstrate that the presence of the weak basal decollement on which most of the Lachlan Fold Belt is constructed effectively decouples crustal structures from those in the underlying mantle. The patterns of faulting in the upper crust appears therefore to be controlled by lateral strength contrasts inherited from previous orogenic events rather than the location of one or several subduction zones. The model also predicts that the uplift and deep exhumation of the Wagga-Omeo Metamorphic Belt (WOMB) is associated with the advection of this terrane above the subduction point and is the only tectonic event that gives us direct constraints on the location of the subduction zone. We also discuss the implications of our model for the nature of the basement underlying the present-day orogen.  相似文献   

A Reflection on Mg, Cd, Ca, Li and Si Isotopic Measurements and Related Reference Materials   总被引：6，自引：1，他引：6  

Jean Carignan  Damien Cardinal  Anton Eisenhauer  Albert Galy  Mark Rehkamper  Frank Wombacher  Nathalie Vigier 《Geostandards and Geoanalytical Research》2004,28(1):139-148

This contribution aims to report the reflections we had with the scientific community during two international workshops on reference materials for stable isotopes in Davos (2002) and Nice (2003). After evaluating the isotopic homogeneity of some existing reference materials, based on either certificates, literature data or specific inter-laboratory rounds, we confirm these as primary reference materials or propose new ones relative to which stable isotope compositions should be reported. We propose DSM-3 for Mg, NIST SRM 915a for Ca, L-SVEC for Li and NBS28 for Si. Cadmium does not yet have a well identified delta zero material, although three commercial mono-elemental Cd solutions have yielded the same isotopic composition relative to one another. In order to scale the linearity of any mass spectrometer, some secondary reference materials are also proposed: Cambridge-1 solution for Mg, the "Münster-Cd" and JEPPIM Cd solutions for Cd and the "Big Batch" silicate for Si. The team from Nancy propose to prepare a mixed spike solution for Li isotopes. Well-characterised natural samples such as ocean or continental waters, diatoms, sponges, rocks and minerals are needed to validate the entire analytical procedure, particularly to take into account the effect of sample mineralisation and of chemical manipulations for elemental separation prior to analysis.  相似文献   

Nouvelle interprétation structurale de la « faille Nord- Pyrénéenne » en vallée d'Aspe (Pyrénées-Atlantiques). Remise en question d'un plutonisme ophitique danien dans le secteur de Bedous     

Joseph Canérot  Claude Majesté-Menjoulas  Yves Ternet 《Comptes Rendus Geoscience》2004,336(2):135-142

In the Aspe Valley (western Pyrenees), the Europe/Iberia boundary corresponds to a complex fracturing zone, called the ‘Bielle–Accous Wrench-Faulting Corridor’, which represents the classical ‘North-Pyrenean Fault’. Located between the High Primary Range and the North-Pyrenean Zone, the BAWC shows different south-verging sheets mainly composed of Triassic materials. The Bedous ophite, associated with Muschelkalk and Keuper sediments, is also Triassic in age and involved in the same Pyrenean thrusting structures. So, contrary to a recent interpretation, this magmatic rock cannot be related to a supposed Danian plutonism inducing metamorphic processes in the surrounding Mesozoic formations. To cite this article: J. Canérot et al., C. R. Geoscience 336 (2004).  相似文献   

Apparent and real bias in numerical transfer functions in palaeolimnology     

Julien M.J. Racca  Yves T. Prairie 《Journal of Paleolimnology》2004,31(1):117-124

We present an evaluation of the procedure by which model prediction bias is examined in palaeolimnological transfer function inference models. We argue that most of the prediction biases commonly reported in the literature are, in fact, fallacious, and are the artificial consequence of the inappropriate manner in which residuals are traditionally examined. We show that the extent of the specious model bias is entirely predictable from first principles and is essentially determined by the strength of the predictive model. We suggest that the analysis of residuals should always be examined as a function of the model's predictions and we discuss the implications of the old and new approaches.  相似文献   

Mixed-grid and staggered-grid finite-difference methods for frequency-domain acoustic wave modelling   总被引：3，自引：0，他引：3  

Bernhard Hustedt  Stéphane Operto  Jean Virieux 《Geophysical Journal International》2004,157(3):1269-1296

  相似文献   

An automated salt‐tracing gauge for flow‐velocity measurement     

Olivier Planchon  Norbert Silvera  Raphael Gimenez  David Favis‐Mortlock  John Wainwright  Yves Le Bissonnais  Gerard Govers 《地球表面变化过程与地形》2005,30(7):833-844

This article introduces the SVG (salt‐velocity gauge), a novel automated technique for measuring flow velocity by means of salt tracing. SVG allows a high measuring rate (up to one every 2 seconds), short control section length (down to 10 cm), high accuracy (+[sol ]?1·5 cm s^?1), and unbiased calculation of the mean velocity in experimental conditions with turbulent, supercritical flow. A few cubic centimetres of saturated salt solution (NaCl) are injected into the flow at regular time intervals using a programmable solenoid valve. The tracer successively passes two conductivity probes placed a short distance downstream. The transformation of the signal between the two probes is modelled as a one‐dimensional diffusion wave equation. Model calibration gives an estimation of the mean velocity and the diffusion for each salt plume. Two implementations of the SVG technique are described. The first was an outdoors simulated rainfall experiment in Senegal (conductivity probes at 40 cm apart, 8 Hz measurement rate, salt injections at 10 second intervals). Mean velocity was estimated to range between 0·1 and 0·3 m s^?1. The second was a laboratory‐based flume experiment (conductivity probes at 10 cm apart, 32 Hz, salt injections at 2 second intervals). Another SVG with probes at 34 cm apart was used for comparison. An acoustic Doppler velocimeter (ADV) was also used to give an independent assessment of velocity. Using the 10 cm salt gauge, estimated mean velocity ranged from 0·6 to 0·9 m s^?1 with a standard deviation of 1·5 cm s^?1. Comparisons between ADV, 10 cm SVG and 34 cm SVG were consistent and demonstrated that the salt‐tracing results were unbiased and independent of distance between probes. Most peaks were modelled with r² > 90 per cent. The SVG technology offers an alternative to the dye‐tracing technique, which has been severely criticized in the literature because of the wide interval of recommended values for the correction factor α to be applied to the timings. This article demonstrates that a fixed value of α is inappropriate, since the correction factor varies with velocity, diffusion and the length of the control section. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Evidence for short-scale stress field variations within intraplate central-western France     

Yves Mazabraud  Nicole Béthoux  Jocelyn Guilbert  Olivier Bellier 《Geophysical Journal International》2005,160(1):161-178

  相似文献