Industrial minerals and rocks, aggregates and natural stones in the Nordic countries     

Kurt Johansson Rune B. Larsen Markku J. Lehtinen Lars Persson Mika Raeisaenen Stig A. Schack Pedersen Paer Weihed Nils-Gunnar Wik 《《幕》》2008,31(1):133-139

The Nordic countries, including Greenland, have a long tradition in mining. The industrial minerals sector is expanding in most Nordic countries and extensive development has taken place during the last few years. The main commodities mined are carbonate rocks, quartz, feldspar, apatite, olivine and talc.
A number of diferent types of dimension stones are quarried in all countries. Rock aggregates are increasingly important, replacing sand and gravel aggregate as construction materials in some countries due to the need to protect ground water supplies.  相似文献   

Microstructural evidence of low‐strain,time‐transgressive subglacial deformation     

N. K. Larsen  J. A. Piotrowski  J. Menzies 《第四纪科学杂志》2007,22(6):593-608

Microstructural analyses were used to investigate the formation of a macroscale‐massive till at Knud Strand in Denmark. More than 100 thin sections were examined and microstructures mapped and counted for quantitative comparison and interpretation. Microstructures indicative of both brittle (grain lineations, edge‐to‐edge crushed grains) and ductile (turbate structures) deformation are evenly distributed in vertical profiles through the till, suggesting that strain contributed to its formation. Discrete shears (grain lineations and plasmic fabric) probably accommodated most deformation, whereas rotational deformation was less prominent. The microshear geometry fits the predicted Coulomb–Mohr failure criterion, indicating that till behaves as a plastic material. Strain estimate of ca. 10¹ from micromorphological proxies is two–three orders of magnitude lower than expected if the till was subjected to pervasive deformation. A hybrid of lodgement and time‐transgressive deformation is envisaged as the till‐forming processes. Our data suggest that even abundant evidence of microscale deformation at continuing high levels of strain may only record the latest process of deposition and deformation and therefore not fully reflect the complexity of till genesis. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

Glacial stratigraphy of East and Central Jutland     

Christian  Kronborg  Henry  Bender  Regnar  Bjerre  Rud  Friborg  Hans O.  Jacobsen  Lars  Kristiansen  Poul  Rasmussen  Poul R.  Sørensen Gunnar  Larsen 《Boreas: An International Journal of Quaternary Research》1990,19(3):273-287

Glaciostratigraphic investigations at one key locality (Haldum), 9 major and about 160 minor localities in East and Central Jutland, Denmark, together with laboratory work, have led to the establishment of a stratigraphy consisting of 10 till units, usually separated by meltwater deposits. The stratigraphy is in some degree supported by thermoluminescence datings. The complete sequence includes one till unit with associated meltwater deposits of Menapian age, three till units with intercalated meltwater deposits of Elsterian age, marine sediments deposited during the Holsteininan, and three till units with intercalated of Elsterian age, marine sediments deposited during the Holsteinian, and three till units with intercalated glaciofluvial sedimants of Saalian age. Eemian deposits are present above this level, and the whole sequence is capped by till and meltwater deposits related to three glacial advances during the Weichselian.  相似文献   

The Plio-Pleistocene glaciation of the Barents Sea–Svalbard region: a new model based on revised chronostratigraphy     

Jochen Knies  Jens Matthiessen  Christoph Vogt  Jan Sverre Laberg  Berit O. Hjelstuen  Morten Smelror  Eiliv Larsen  Karin Andreassen  Tor Eidvin  Tore O. Vorren 《Quaternary Science Reviews》2009,28(9-10):812-829

Based on a revised chronostratigraphy, and compilation of borehole data from the Barents Sea continental margin, a coherent glaciation model is proposed for the Barents Sea ice sheet over the past 3.5 million years (Ma). Three phases of ice growth are suggested: (1) The initial build-up phase, covering mountainous regions and reaching the coastline/shelf edge in the northern Barents Sea during short-term glacial intensification, is concomitant with the onset of the Northern Hemisphere Glaciation (3.6–2.4 Ma). (2) A transitional growth phase (2.4–1.0 Ma), during which the ice sheet expanded towards the southern Barents Sea and reached the northwestern Kara Sea. This is inferred from step-wise decrease of Siberian river-supplied smectite-rich sediments, likely caused by ice sheet blockade and possibly reduced sea ice formation in the Kara Sea as well as glacigenic wedge growth along the northwestern Barents Sea margin hampering entrainment and transport of sea ice sediments to the Arctic–Atlantic gateway. (3) Finally, large-scale glaciation in the Barents Sea occurred after 1 Ma with repeated advances to the shelf edge. The timing is inferred from ice grounding on the Yermak Plateau at about 0.95 Ma, and higher frequencies of gravity-driven mass movements along the western Barents Sea margin associated with expansive glacial growth.  相似文献   

Introduction to “tectonics and sedimentation of Southeast Asian continental margin and marginal seas”     

Zhen Sun  Chun-Feng Li  Guo-Liang Zhang  Hans Christian Larsen 《Marine Geophysical Researches》2015,36(2-3):99-100

  相似文献   

The roughness of the dark side of Iapetus from the 2004 to 2005 flyby     

Janice S. Lee  Bonnie J. Buratti  Joel Mosher 《Icarus》2010,206(2):623-630

The roughness of a planetary surface offers clues to its past geologic history. We apply a surface roughness model developed by Buratti and Veverka (Buratti, B.J., Veverka, J. [1985]. Icarus 64, 320-328) to Cassini ISS data from the January 1st, 2005 flyby of Iapetus. This model uses the observed scattering behavior to provide a depth to radius factor q quantifying the size of idealized craters on the surface. Our findings indicate that the surface on the dark side is significantly smoother than the surfaces of other icy low-albedo saturnian satellites. We have found that the average depth to radius on the leading (dark) side is 0.084, corresponding to a Hapke mean slope angle of 6°. As compared to the 13-33° Hapke mean slope angle of other icy satellites (Buratti, B.J., and 10 colleagues [2008]. Icarus 193, 309-322), our results present a clearly different picture for the leading surface of Iapetus, suggesting that the dark deposit contributes to the decrease in macroscopic surface roughness of the leading side. Attempts were made to obtain an average depth to radius value for the trailing (bright) side; however the scans of the bright side from this flyby exhibited large variations in albedo, resulting in results that were physically unrealistic.  相似文献   

Mobilization of arsenic and iron from Red River floodplain sediments, Vietnam   总被引：3，自引：0，他引：3  

Dieke Postma  Søren Jessen  Mai Thanh Duc  Pham Hung Viet  Flemming Larsen 《Geochimica et cosmochimica acta》2010,74(12):3367-508

Sediments from the Red River and from an adjacent floodplain aquifer were investigated with respect to the speciation of Fe and As in the solid phase, to trace the diagenetic changes in the river sediment upon burial into young aquifers, and the related mechanisms of arsenic release to the groundwater. Goethite with subordinate amounts of hematite were, using Mössbauer spectroscopy, identified as the iron oxide minerals present in both types of sediment. The release kinetics of Fe, As, Mn and PO₄ from the sediment were investigated in leaching experiments with HCl and 10 mM ascorbic acid, both at pH 3. From the river sediments, most of the Fe and As was mobilized by reductive dissolution with ascorbic acid while HCl released very little Fe and As. This suggests As to be associated with an Fe-oxide phase. For oxidized aquifer sediment most Fe was mobilized by ascorbic acid but here not much As was released. However, the reduced aquifer sediments contained a large pool of Fe(II) and As that is readily leached by HCl, probably derived from an unidentified authigenic Fe(II)-containing mineral which incorporates As as well. Extraction with ascorbic acid indicates that the river sediments contain both As(V) and As(III), while the reduced aquifer sediment almost exclusively releases As(III). The difference in the amount of Fe(II) leached from river and oxidized aquifer sediments by ascorbic acid and HCl, was attributed to reductive dissolution of Fe(III). The reactivity of this pool of Fe(III) was quantified by a rate law and compared to that of synthetic iron oxides. In the river mud, Fe(III) had a reactivity close to that of ferrihydrite, while the river sand and oxidized aquifer sediment exhibited a reactivity ranging from lepidocrocite or poorly crystalline goethite to hematite. Mineralogy by itself appears to be a poor predictor of the iron oxide reactivity in natural samples using the reactivity of synthetic Fe-oxides as a reference. Sediments were incubated, both unamended and with acetate added, and monitored for up to 2 months. The river mud showed the fastest release of both Fe and As, while the effect of acetate addition was minor. This suggests that the presence of reactive organic carbon is not rate limiting. In the case of the river and aquifer sediments, the release of Fe and As was always stimulated by acetate addition and here reactive organic carbon was clearly the rate limiting factor. The reduced aquifer sediment apparently can sustain slower but prolonged microbially-driven release of As. The highly reactive pools of Fe(III) and As in the river mud could be due to reoxidation of As and Fe contained in the reducing groundwater from the floodplain aquifers that are discharging into the river. Deposition of the suspended mud on the floodplain during high river stages is proposed to be a major flux of As onto the floodplain and into the underlying aquifers.  相似文献   

When seed fails: The contested nature of neoliberalism in South Korea     

Sook-Jin Kim  Joel Wainwright 《Geoforum》2010,41(5):723-733

In recent years, many geographers have examined the ways that the production of nature has changed as a result of neoliberal practices. In this paper we examine a conflict in South Korea that started when some Chinese-cabbage seeds were affected by a virus, causing crop failure. This failure came shortly after liberalization in the Korean seed industry led to foreign ownership of the firm that sold the seed. We focus in particular on the farmers’ creative political responses - and their subsequent defeat in court. Drawing on Antonio Gramsci’s insights on politics, science, and law, we examine how the seed failure came to be evaluated through scientific and legal practices. We argue that the adjudication of the truth of the seed failure through science and law reveals how socionatures are contested under prevailing hegemonic conditions. These conditions are both general and specific: although law and science are relatively hegemonic spheres of truth-production in all capitalist societies, the ways that the seeds were disputed and evaluated were distinctly Korean.  相似文献   

A major element,PGE and Re–Os isotope study of Middle Atlas (Morocco) peridotite xenoliths: Evidence for coupled introduction of metasomatic sulphides and clinopyroxene     

Nadine Wittig  D. Graham Pearson  Joel A. Baker  Svend Duggen  Kaj Hoernle 《Lithos》2010,115(1-4):15-26

We present major element and PGE (platinum-group-element) abundances in addition to Re–Os isotope data for 11 spinel-facies whole rock peridotites from a single maar from the Middle Atlas Mountains, Morocco.Major element systematics of these xenoliths are generally correlated with indices of depletion. FeO–MgO systematics appear to suggest spinel-facies melting in the range of 5 to 25%. However, Al₂O₃ abundances in these xenoliths appear elevated relative to primitive mantle (Prima). The Al₂O₃ abundances in conjunction with other major elements require distinct re-enrichment of the Middle Atlas continental mantle root due to melt/rock reaction and precipitation of amphibole and/or clinopyroxene from passing silicate melts akin to MORB or OIB that evolved in reverse direction along the melting curves in e.g. FeO–MgO space. Sc and V confirm the range of apparent depletion and also indicate that the currently preserved fO₂ in these peridotites is distinctly different from fO₂ conditions observed in subduction zones.The majority of these xenoliths have low Os and Ir (I-PGEs) concentrations relative to Prima and modelled sulphide- and clinopyroxene-depleted residues of mantle melting under low fO₂, mid-ocean ridge-like conditions. Moreover, Pt and Pd (P-PGE) abundances are elevated when compared to their expected abundances after substantial melt extraction. Importantly, the systematically low Ir abundances in the majority of samples show well-correlated trends with Al₂O₃, MgO and Cu that are inconsistent with established melting trends. Os isotopes in the Middle Atlas xenoliths range from ¹⁸⁷Os/¹⁸⁸Os = 0.11604 to 0.12664 although most samples are close to chondritic. The Os isotope ratios are decoupled from ¹⁸⁷Re/¹⁸⁸Os but, together with Re abundances, also exhibit a good correlation with Al₂O₃, MgO and Cu.The major element, I-PGE and Os isotope correlations suggest that the initial melt depletion led to the exhaustion of sulphide and clinopyroxene (20 to 30%) without significant stabilization of I-PGE-rich alloys. During later modal metasomatism of the refractory Middle Atlas continental mantle root with silicate melts akin to MORB or OIB the introduction of clinopyroxene/amphibole reduced the volume of the melt inducing sulphur saturation in these melts causing precipitation of secondary sulphides. This coupled crystallization of pyroxenes and sulphides (chalcopyrite) resulted in the two-component mixing systematics exhibited by I-PGEs, Os isotopes with major elements and Cu preserved in the Middle Atlas continental mantle root.  相似文献   

Propagation of vertical and horizontal source data errors into a TIN with linear interpolation   总被引：1，自引：0，他引：1  

Lei Fan  Joel Smethurst  Peter Atkinson  William Powrie 《International journal of geographical information science》2014,28(7):1378-1400

Digital elevation models (DEMs) have been widely used for a range of applications and form the basis of many GIS-related tasks. An essential aspect of a DEM is its accuracy, which depends on a variety of factors, such as source data quality, interpolation methods, data sampling density and the surface topographical characteristics. In recent years, point measurements acquired directly from land surveying such as differential global positioning system and light detection and ranging have become increasingly popular. These topographical data points can be used as the source data for the creation of DEMs at a local or regional scale. The errors in point measurements can be estimated in some cases. The focus of this article is on how the errors in the source data propagate into DEMs. The interpolation method considered is a triangulated irregular network (TIN) with linear interpolation. Both horizontal and vertical errors in source data points are considered in this study. An analytical method is derived for the error propagation into any particular point of interest within a TIN model. The solution is validated using Monte Carlo simulations and survey data obtained from a terrestrial laser scanner.  相似文献