A modified mix-differenced approach for estimating multi-GNSS real-time satellite clock offsets     

Yongchang Chen  Yunbin Yuan  Baocheng Zhang  Teng Liu  Wenwu Ding  Qingsong Ai 《GPS Solutions》2018,22(3):72

A modified mixed-differenced approach for estimating multi-GNSS real-time clock offsets is presented. This approach, as compared to the earlier presented mixed-differenced approach which uses epoch-differenced and undifferenced observations, further adds a satellite-differenced process. The proposed approach, based on real-time orbit products and a mix of epoch-differenced and satellite-differenced observations to estimate only satellite clock offsets and tropospheric zenith wet delays, has fewer estimated parameters than other approaches, and thus its implementing procedure is efficient and can be performed and extended easily. To obtain high accuracy, the approach involves three steps. First, the high-accuracy tropospheric zenith wet delay of each station is estimated using mixed-differenced carrier phase observations. Second, satellite clock offset changes between adjacent epochs are estimated using also mixed-differenced carrier phase observations. Third, the satellite clock offsets at the initial epoch are estimated using satellite-differenced pseudorange observations. Finally, the initial epoch clock results and clock offset changes are concatenated to obtain the clock results of the current epoch. To validate the real-time satellite clock results, multi-GNSS post-processing clock products from IGS ACs were selected for comparison. From the comparison, the standard deviations of the GPS, GLONASS, BeiDou and Galileo systems clock results are approximately 0.1–0.4 ns, except for the BeiDou GEO satellites. The root mean squares are about 0.4–2.3 ns, which are similar to those of other international real-time products. When the clock estimates were assessed based on a pseudo-kinematic PPP procedure, the positioning accuracies in the East, North and Up components reach 5.6, 5.5 and 7.6 cm, respectively, which meet the centimeter level and are comparable to the application of other products.  相似文献   

Beidou satellite maneuver thrust force estimation for precise orbit determination     

Jing Qiao  Wu Chen 《GPS Solutions》2018,22(2):42

Beidou satellites, especially geostationary earth orbit (GEO) and inclined geosynchronous orbit (IGSO) satellites, need to be frequently maneuvered to keep them in position due to various perturbations. The satellite ephemerides are not available during such maneuver periods. Precise estimation of thrust forces acting on satellites would provide continuous ephemerides during maneuver periods and could significantly improve orbit accuracy immediately after the maneuver. This would increase satellite usability for both real-time and post-processing applications. Using 1 year of observations from the Multi-GNSS Experiment network (MGEX), we estimate the precise maneuver periods for all Beidou satellites and the thrust forces. On average, GEO and IGSO satellites in the Beidou constellation are maneuvered 12 and 2 times, respectively, each year. For GEO satellites, the maneuvers are mainly in-plane, while out-of-plane maneuvers are observed for IGSO satellites and a small number of GEO satellites. In most cases, the Beidou satellite maneuver periods last 15–25 min, but can be as much as 2 h for the few out-of-plane maneuvers of GEO satellites. The thrust forces acting on Beidou satellites are normally in the order of 0.1–0.7 mm/s². This can cause changes in velocity of GEO/IGSO satellites in the order of several decimeters per second. In the extreme cases of GEO out-of-plane maneuvers, very large cross-track velocity changes are observed, namely 28 m/s, induced by 5.4 mm/s² thrust forces. Also, we demonstrate that by applying the estimated thrust forces in orbit integration, the orbit errors can be estimated at decimeter level in along- and cross-track directions during normal maneuver periods, and 1–2 m in all the orbital directions for the enormous GEO out-of-plane maneuver.  相似文献   

Analysis of estimated satellite clock biases and their effects on precise point positioning     

Shirong Ye  Lewen Zhao  Jia Song  Dezhong Chen  Weiping Jiang 《GPS Solutions》2018,22(1):16

This study provides a systemic analysis to identify the biases in estimated satellite clocks and illustrates their effects in precise point positioning (PPP). First, the precise satellite clock estimation method considering pseudorange and carrier phase hardware delays is derived. Two methods for satellite clock estimation are compared, and their equivalency is discussed. The results show that apart from the well-known constant code hardware biases, the time-variant phase hardware biases are also absorbed by the estimated clocks. Also, the satellite clocks contain biases caused by modeling errors. To analyze the effects of these biases, they are grouped into initial clock biases (ICBs) and time-dependent biases (TDBs). Then, a detailed analysis of the impact of the biases on PPP-based troposphere and coordinate estimates is conducted. The experimental analysis demonstrates that TDBs affect positioning and tropospheric estimates, and their impacts are more significant in the static mode. The ICBs affect coordinate accuracy, zenith total delay mean bias, and its standard deviations only at the millimeter level for kinematic and static PPP, which is negligible. However, the ICBs affect the convergence period for both static and real kinematic PPP, and the magnitude of their impact largely depends on data quality. Note that satellites clocks are generally estimated with the P1/P2 and L1/L2 ionospheric-free combinations, and that hardware-specific parts of ICBs and TDBs cancel if users employ the same type of observables as the clock providers. Otherwise, the effects of biases cannot be ignored, especially for triple-frequency applications. Also, modeling-specific parts of ICBs and TDBs are significant in real-time clocks, which also affect user applications. Our conclusion is applicable for understanding the effects of these biases.  相似文献   

Object- and pixel-based classifications of macroalgae farming area with high spatial resolution imagery     

Yuhan Zheng  Anqi Wang  Jiang Chen 《国际地球制图》2018,33(10):1048-1063

Macroalgae plays an important role in coastal ecosystems. The accurate delineation of macroalgae areas is important for environmental management. This study compared the pixel- and object-based methods using Gaofen satellite no. 2 image to explore an efficient classification approach. Expert system rules and nearest neighbour classifier were adopted for object-based classification, whereas maximum likelihood classifier was implemented in the pixel-based approach. Normalized difference vegetation index, normalized difference water index, mean value of the blue band and geometric characteristics were selected as features to distinguish macroalgae farms by considering the spectral and spatial characteristics. Results show that the object-based method achieved a higher overall accuracy and kappa coefficient than the pixel-based method. Moreover, the object-based approach displayed superiority in identifying Porphyra class. These findings suggest that the object-based method can delineate macroalgae farming areas efficiently and be applied in the future to monitor the macroalgae farms with high spatial resolution imagery.  相似文献   

玄武岩柱状节理六边形结构形成机制探讨     

周思耘  吴晨 《地质论评》2021,67(6):1629-1635

玄武岩柱状节理往往呈现完美的六边形石柱,这种现象引起了人们的广泛关注和好奇,但是对于其形成机理尚无合理的解释。本文通过对冷却过程中的玄武岩进行受力分析,提出当岩石（浆）冷凝收缩的凝聚力达到其抗张强度时,岩石（浆）内部发生潜在破裂和微形变;当潜在破裂面形成后,因岩石的泊松效应,微小潜在破裂面处的应力状态发生重整,形成新的潜在破裂面;当新的潜在破裂面处的剪应力等于岩石抗张强度时,岩石（浆）发生剪切破裂,形成如今所见的柱状节理。根据前人相关岩石实验数据,推算得到玄武岩相应温度下的内摩擦角、黏聚力、抗张强度和泊松比,采用应力莫尔圆方法进行数值计算,获得玄武岩在冷却到800 ℃左右时发生破裂,六棱柱形柱状节理开始形成,内角约119.1°。进一步分析认为,岩石的黏聚力、石英含量等因素可能控制着柱状节理的发育和形状。  相似文献   

地球深部真的贫铀钍吗? ——来自秦岭造山带加里东期岩浆岩体锆石铀钍含量的讨论     

伍皓  李小刚  吴晨  夏彧  周恳恳  熊国庆  姚雪婷 《地质论评》2021,67(5):1207-1230

为尝试利用锆石来初步探索地球内部铀、钍的丰度,通过搜集秦岭造山带加里东期岩浆岩体锆石U-Th-Pb同位素测年文献,掌握了3件超基性岩、52件基性岩、46件中性岩、90件酸性岩,共计191件样品,6979个（铀含量数据3552个,钍含量数据3427个）锆石定年数据。数据分析指示铀和钍在同一类型岩浆岩锆石中含量均相差悬殊,可在不同类型岩浆岩锆石中富集或亏损,不具有从超基性岩到基性岩到中性岩再到酸性岩总体增加的趋势。在所有样品锆石铀、钍平均值2倍以上的45件高富集样品中的34件呈现“局部长期”分布的特征,表现为：10件在451.0~422.1 Ma期间的以OIB型基性、中基性岩为主的样品约29 Ma时间集中产出在南秦岭大巴山地区,岩浆多来自由HIMU,EMII和EMI三个富集地幔端元组分混合而成的复杂地幔区;24件在495.9~413.6 Ma期间的以I型、S-I型酸性岩为主的样品约82 Ma时间集中产出于北秦岭商丹（商南—丹凤）地区,岩浆可来自地幔、壳幔混合和地壳源区。结合华南金属铀（0价）的发现等前人研究成果初步分析认为,加里东期大巴山和商丹地区可能分别存在地幔柱和大陆型热点,地核中大量铀、钍沿地幔柱和大陆型热点上升致使地幔和地壳局部熔体中铀、钍长期富集,其超高含量可能被熔体中锆石结晶部分记录,这一元素迁移过程可能是两区域产出高锆石铀、钍含量样品和商丹地区生成铀矿的主要原因。支持铀、钍可在地核和地幔柱富集的认识。  相似文献   

论中国国家公园地质考察与评价——以浙江丽水百山祖国家公园为例     

李玉辉  王志国  毛烨峰  朱浙辉  陈林  李春忠  李鑫  孟耀 《地质论评》2021,67(4):67050002-67050002

鉴于保护地调查评价历史与目标,国家公园地质考察评价基准是地质学关于地球的“时间、空间、演化”知识的发现路径,既识别国家公园候选地的国家符合性地质事件,又识别国家公园自然性、独特性、优美性、多样性、整体性的地质机制,提供国家公园最重要的自然生态系统与自然景观保育管理的地质学支撑。浙江丽水百山祖国家公园符合性的地质事件是公园发现的4.0~4.2 Ga冥古宙陆核物质的锆石晶体、中生代岛弧陆盆火山酸性火山岩系列和从流纹岩山岭到花岗岩—变质岩谷底的“峰—岭—丘—谷（盆）”的亚热带滨海山地地貌结构,地貌结构发育演化是百山祖公园最重要的自然生态系统、区域性流域水源地、独特山水景观的形成基础。保护百祖山公园地貌结构和过程的完整性与真实性是确保其重要自然生态系统自然演化和生态服务产品持续供给的基础。  相似文献   

磁法三维建模在龙王沟磁铁矿勘探中的应用     

陈炳锦 《地质与勘探》2021,57(1):146-155

以龙王沟磁铁矿高精度磁测数据为基础,采用小波多尺度分解方法,对化极后的磁法数据进行多尺度分解,通过功率谱法计算小波多尺度分解后的各阶细节异常的场源深度。结合地形、地质及钻孔资料,采用2.5D人机交互反演对磁测剖面上的磁铁矿体进行拟合,利用Golden Software公司开发的Voxler软件,在虚拟三维环境下实现二维小波多尺度分解数据的可视化,建立三维地质体模型,直观的预测磁铁矿体的空间范围和分布形态,实现地质、物探和地上、地下信息一体化集成展示,进行专业分析评价和辅助决策,可以有效的提高地质找矿效果。  相似文献   

基于ASTER与Sentinel-2A融合数据的云南普朗铜矿化蚀变信息提取     

陈琪 《地质与勘探》2021,57(4):728-738

云南普朗铜矿区是我国提高战略性金属矿产铜矿资源的主要潜力地段,该矿区位于多云多雨山地高原区,采用传统地面调查方法开展找矿勘查工作受限较大,而遥感技术可在其中发挥重要作用。鉴于此,本研究选取ASTER和Sentinel-2A多光谱遥感数据,在光谱协同统一两种数据源的地表反射率基础上,采用高通滤波(High-Pass Filtering,HPF)的融合方法兼顾两种数据在短波红外波段和可见光近红外波段的优势,获取了具有高空间分辨率和高光谱保真度的ASTER-Sentinel-2A融合数据集;进而利用"比值+主成分分析法"与"主成分分析+能谱-面积法",开展了普朗铜矿区矿化遥感蚀变信息识别,并通过深入分析及野外验证,提出了对普朗铜矿蚀变信息分布特征及找矿潜力地带的新认识:(1)在原蚀变填图工作中判定为青磐岩化带的东部区域,重新进行了蚀变带的划分;(2)东部区域中新划分的钾化硅化带和绢英岩化带,具有较大找矿潜力。本研究可为普朗铜矿找矿勘查提供参考。  相似文献   

滇西盈江地区新泡山离子吸附型稀土矿床成矿条件及找矿前景     

陈曹军 《地质与勘探》2021,57(4):751-761

滇西盈江地区是近年来离子吸附型稀土矿床找矿突破较大的地区,典型代表为腾冲岩浆弧内新发现的新泡山稀土矿床,为一中型离子吸附型稀土矿床,是滇西高海拔地区新发现的典型矿床。新泡山稀土矿床的发现对今后高海拔地区的找矿工作具有重要的示范意义。通过对新泡山稀土矿床的地质特征、风化壳结构特征、矿体垂向变化特征进行研究,认为新泡山稀土矿床类型为富钕轻稀土离子吸附型稀土矿床,并伴生有重稀土钇。滇西盈江地区与花岗岩有关的离子吸附型稀土矿主要受控于母岩稀土元素丰度、气候以及地形地貌。"沟-谷-盆"地貌两侧及周缘低缓山丘和平缓山坡、山脊是有利的成矿部位。结合区域找矿成果,认为研究区稀土矿找矿潜力较大,可达超大型远景规模,在后续的找矿工作中应加强对重稀土元素钇的评价。  相似文献