Statistics of Wind and Waves off Tsuyazaki, Fukuoka, in the Eastern Tsushima Strait     

Akira Masuda  Tadao Kusaba  Kenji Marubayashi  Michiyoshi Ishibashi 《Journal of Oceanography》1999,55(2):289-305

The variability of the sea surface wind and wind waves in the coastal area of the Eastern Tsushima Strait was investigated based on the hourly data from 1990 to 1997 obtained at a station 2 km off Tsuyazaki, Fukuoka. The annual mean wind speed was 4.84 m s⁻¹, with strong northwesterly monsoon in winter and weak southwesterly wind in summer. Significant wave heights and wave periods showed similar sinusoidal seasonal cycles around their annual means of 0.608 m and 4.77 s, respectively. The seasonal variability relative to the annual mean is maximum for wave heights, medium for wind speeds, and minimum for wave periods. Significant wave heights off Tsuyazaki turned out to be bounded by a criterion, which is proportional to the square of the significant wave period corresponding to a constant steepness, irrespective of the season or the wind speed. For terms shorter than a month, the significant wave height and the wave period were found to have the same spectral form as the inshore wind velocity: white for frequencies less than 0.2 day⁻¹ and proportional to the frequency to the −5/3 power for higher frequencies, where the latter corresponds to the inertial subrange of turbulence. The spectral levels of wave heights and wave periods in that inertial range were also correlated with those of the inshore wind velocity, though the scatter was large. This revised version was published online in August 2006 with corrections to the Cover Date.  相似文献   

Dissociation of CAS phase in the uppermost lower mantle     

Kazufusa Ishibashi  Kei Hirose  Nagayoshi Sata  Yasuo Ohishi 《Physics and Chemistry of Minerals》2008,35(4):197-200

The high-pressure stability limit of calcium aluminosilicate (CAS) phase has been examined in its end-member CaAl₄Si₂O₁₁ composition at 18–39 GPa and 1,670–2,300 K in a laser-heated diamond-anvil cell (LHDAC). The in-situ synchrotron X-ray diffraction measurements revealed that the CAS phase decomposes into three-phase assemblage of cubic Al-bearing CaSiO₃ perovskite, Al₂O₃ corundum, and SiO₂ stishovite above 30 GPa and 2,000 K with a positive pressure–temperature slope. Present results have important implications for the subsolidus mineral assemblage of subducted sediment and the melting phase relation of basalt in the lower mantle.  相似文献   

Episyenite formation in the Toki granite,central Japan     

Shoji?NishimotoEmail author  Hidekazu?Yoshida  Yoshihiro?Asahara  Tadahiko?Tsuruta  Masayuki?Ishibashi  Nagayoshi?Katsuta 《Contributions to Mineralogy and Petrology》2014,167(1):960

Episyenite is a quartz-depleted vuggy rock resulting from hydrothermal alteration of granitic rocks. This is the first report of its existence in an island arc, which is identified in a deep drill core of the Toki Cretaceous granite distributed in central Japan. In order to understand the petrographical features of the episyenite, neutron porosity measurement, geochemical analysis, microscopic observation, and X-ray computed tomography scanning were carried out. The results show remarkably high porosity (35.4 %) due to interconnecting vugs and the removal of quartz, plagioclase, and biotite. The Rb–Sr isotopic results and the paragenetic sequence of secondary minerals in the vugs suggest that the hydrothermal alteration process can be divided into an episyenitization stage and a later hydrothermal stage. At the episyenitization stage (70.6 ± 3.1 Ma) ca. 6 million years after the emplacement of the unaltered granite (76.3 ± 1.5 Ma), dissolution of quartz, biotite, and plagioclase occurred and was followed by the precipitation of albite, vermicular chlorite, and platy calcite. The episyenitization is considered as a local alteration of the Toki granite in an isotopically closed system. At the later hydrothermal stage, illite and secondary quartz precipitated from circulating meteoric-derived water in the dissolution vugs. Superimposing alteration at the later hydrothermal stage is limited, which results in the preservation of the episyenite in an almost primitive condition.  相似文献   

Sylvite and halite on particles recovered from 25143 Itokawa: A preliminary report     

T. Noguchi  M. Kimura  T. Hashimoto  M. Konno  T. Nakamura  M. E. Zolensky  A. Tsuchiyama  T. Matsumoto  J. Matsuno  R. Okazaki  M. Uesugi  Y. Karouji  T. Yada  Y. Ishibashi  K. Shirai  M. Abe  T. Okada 《Meteoritics & planetary science》2014,49(7):1305-1314

We observed cross sectional ultra‐thin sections near the surface of 12 particles recovered from the S‐type asteroid Itokawa by the Hayabusa spacecraft in 2010, using spherical aberration–corrected STEM and conventional TEM. Although their mineralogy is almost identical to the equilibrated LL chondrites and therefore basically anhydrous, micrometer‐to‐submicrometer‐sized sylvite was identified on the surface of Itokawa particle RA‐QD02‐0034. Separately, micrometer‐sized halite was also identified on the surface of Itokawa particle RA‐QD02‐0129. Detailed inspection of the sample processing procedures at the JAXA's Planetary Materials Sample Curation Facility and textural observation of the sylvite and halite indicate that they were clearly present on two Itokawa particles before they were removed from Clean Chamber #2 at JAXA. However, there is no direct evidence for their extraterrestrial origin at present. If the sylvite and halite are extraterrestrial, their presence suggests that they may be more abundant on the surface of S‐type asteroids than previously thought.  相似文献   

Exploring sustainability of aquifers based on predictive modeling of sorption characteristics of arsenic enriched Holocene sediments in Bangladesh     

M. Tauhid-Ur-Rahman  Akira ManoKeiko Udo  Yoshinobu Ishibashi 《Applied Geochemistry》2011,26(4):636-647

The importance of accessing safe aquifers in areas with high As is being increasingly recognized. The present study aims to investigate the sorption and mobility of As at the sediment-groundwater interface to identify a likely safe aquifer in the Holocene deposit in southwestern Bangladesh. The upper, shallow aquifer at around 18 m depth, which is composed mainly of very fine, grey, reduced sand and contains 24.3 μg/g As, was found to produce highly enriched groundwater (190 μg/L As). In contrast, deeper sediments are composed of partly oxidized, brownish, medium sand with natural adsorbents like Fe- and Al-oxides; they contain 0.76 μg/g As and impart low As concentrations to the water (4 μg/L). These observations were supported by spectroscopic studies with SEM, TEM, XRD and XRF, and by adsorption, leaching, column tests and sequential extraction. A relatively high in-situ dissolution rate (R_r) of 1.42 × 10⁻¹⁶ mol/m²/s was derived for the shallower aquifer from the inverse mass-balance model. The high R_r may enhance As release processes in the upper sediment. The field-based reaction rate (K_r) was extrapolated to be roughly 1.23 × 10⁻¹³ s⁻¹ and 6.24 × 10⁻¹⁴ s⁻¹ for the shallower and deeper aquifer, respectively, from the laboratory-obtained adsorption/desorption data. This implies that As is more reactive in the shallower aquifer. The partition coefficient for the distribution of As at the sediment-water interface (K_d-As) was found to range from 5 to 235 L/kg based on in-situ, batch adsorption, and flow-through column techniques. Additionally, a parametric equation for K_d-As (R² = 0.67) was obtained from the groundwater pH and the logarithm of the leachable Fe and Al concentrations in sediment. A one-dimensional finite-difference numerical model incorporating K_d and K_r showed that the shallow, leached As can be immobilized and prevented from reaching the deeper aquifer (∼150 m) after 100 year by a natural filter of oxidizing sand and adsorbent minerals like Fe and Al oxides; in this scenario, 99% of the As in groundwater is reduced. The deeper aquifer appears to be an adequate source of sustainable, safe water.  相似文献   

Uptake and biological effects of synthetic glucocorticoids in common carp (Cyprinus carpio)     

Kei Nakayama  Yoshiyuki Inoue  Naomi Ikeda  Naoki Hashizume  Hidekazu Murakami  Takeshi Ishibashi  Hirofumi Ikeda  Tomohiko Isobe  Shin-Ichi Kitamura  Go Suzuki 《Marine pollution bulletin》2014

Uptake and biological effects of synthetic glucocorticoids (GCs) were analyzed using common carp (Cyprinus carpio). Fish were exposed to clobetasol propionate (CP) or clobetasone butyrate (CB) individually or in mixture at 1 μg L⁻¹ for 21 days. Bioconcentration factor (BCF) of CB was calculated as 100, and BCF of CP was less than 16. No effects were found in fish erythrocyte and leukocyte numbers and serum glucose levels after exposure to the selected GCs. On the other hand, serum concentrations of free amino acids significantly increased in GC-exposed groups. Thus, exposures to synthetic GCs at relatively low concentrations seemed to cause enhancement of protein degradation and subsequent increase of serum free amino acids without a corresponding increase in serum glucose levels, an effect which might be related to partial induction of gluconeogenesis by GC.  相似文献   

Onboard experiment investigating metal leaching of fresh hydrothermal sulfide cores into seawater     

Shigeshi Fuchida  Jun-ichiro Ishibashi  Kazuhiko Shimada  Tatsuo Nozaki  Masanobu Kawachi  Yoshitaka Matsushita  Hiroshi Koshikawa 《Geochemical transactions》2018,19(1):15

We observed the initial release rate of metals from four fresh (i.e., without long time exposure to the atmosphere) hydrothermal sulfide cores into artificial seawater. The sulfide samples were collected by seafloor drilling from the Okinawa Trough by D/V Chikyu, powdered under inert gas, and immediately subjected to onboard metal-leaching experiments at different temperatures (5 °C and 20 °C), and under different redox conditions (oxic and anoxic), for 1–30 h. Zinc and Pb were preferentially released from sulfide samples containing various metals (i.e., Mn, Fe, Cu, Zn, Cd, and Pb) into seawater. Under oxic experimental conditions, Zn and Pb dissolution rates from two sulfide samples composed mainly of iron disulfide minerals (pyrite and marcasite) were higher than those from two other sulfide samples with abundant sphalerite, galena, and/or silicate minerals. Scanning electron microscopy confirmed that the high metal-releasing sample contained several galvanic couples of iron disulfide with other sulfide minerals, whereas the low metal-releasing sample contained fewer galvanic couples or were coated by a silicate mineral. The experiments overall confirmed that the galvanic effects with iron disulfide minerals greatly induce the initial release of Zn and Pb from hydrothermal sulfides into seawater, especially under warm oxic conditions.  相似文献   

Shaking table tests of a reinforced concrete bridge pier with a low-cost sliding pendulum system     

Miguel B. Brito  Hiroki Ishibashi  Mitsuyoshi Akiyama 《地震工程与结构动力学》2019,48(3):366-386

After the occurrence of various destructive earthquakes in Japan, extensive efforts have been made to improve the seismic performance of bridges. Although improvements to the ductile capacities of reinforced concrete (RC) bridge piers have been developed over the past few decades, seismic resilience has not been adequately ensured. Simple ductile structures are not robust and exhibit a certain level of damage under extremely strong earthquakes, leading to large residual displacements and higher repair costs, which incur in societies with less-effective disaster response and recovery measures. To ensure the seismic resilience of bridges, it is necessary to continue developing the seismic design methodology of RC bridges by exploring new concepts while avoiding the use of expensive materials. Therefore, to maximize the postevent operability, a novel RC bridge pier with a low-cost sliding pendulum system is proposed. The seismic force is reduced as the upper component moves along a concave sliding surface atop the lower component of the RC bridge pier. No replaceable seismic devices are included to lengthen the natural period; only conventional concrete and steel are used to achieve low-cost design solutions. The seismic performance was evaluated through unidirectional shaking table tests. The experimental results demonstrated a reduction in the shear force transmitted to the substructure, and the residual displacement decreased by establishing an adequate radius of the sliding surface. Finally, a nonlinear dynamic analysis was performed to estimate the seismic response of the proposed RC bridge pier.  相似文献   

X-ray CT based numerical analysis of fracture flow for core samples under various confining pressures   总被引：1，自引：0，他引：1  

Noriaki Watanabe  Takuya Ishibashi  Yutaka Ohsaki  Yoshihiro Tsuchiya  Tetsuya Tamagawa  Nobuo Hirano  Hiroshi Okabe  Noriyoshi Tsuchiya 《Engineering Geology》2011,(4):338

The X-ray CT based numerical analysis of fracture flow for core samples, recently developed by the authors, was applied to two granite core samples having either a mated artificial or a mated natural fracture at confining pressures of 5 to 50 MPa. A third-generation medical X-ray CT scanner was used to image the samples within a core holder consisting of an aluminum liner and a carbon fiber overwrap. Fracture models (i.e., aperture distributions) were obtained by the CT images, the resolution of which was coarser than the apertures, and a single-phase flow simulation was performed using a local cubic law-based fracture flow model. Numerical results were evaluated by a fracture porosity measurement and a solution displacement experiment using NaCl and NaI aqueous solutions. These numerical results coincided only qualitatively with the experimental results, primarily due to image noise from the aluminum liner of the core holder. Nevertheless, the numerical results revealed flow paths within the fractures and their changes with confining pressure, whereas the experimental results did not provide such results. Different stress-dependencies in the flow paths were observed between the two samples despite the similar stress-dependency in fracture porosity and permeability. The changes in total area of the flow paths with confining pressure coincided qualitatively with changes in breakthrough points in the solution displacement experiment. Although the data is limited, the results of the present study suggest the importance of analyzing fluid flows within naturally fractured core samples under in situ conditions in order to better understand the fracture flow characteristics in a specific field. As demonstrated herein, X-ray CT-based numerical analysis is effective for addressing this concern. Using a multi-phase flow model, as well as a core holder constructed of an engineered plastic, should provide a useful, non-destructive, and non-contaminative X-ray CT-based fracture flow analysis for core samples under in situ conditions in future studies.  相似文献   

Clay Minerals in an Active Hydrothermal Field at Iheya‐North‐Knoll,Okinawa Trough          下载免费PDF全文

Youko Miyoshi  Jun‐ichiro Ishibashi  Kazuhiko Shimada  Hiroyasu Inoue  Seiichiro Uehara  Katsuhiro Tsukimura 《Resource Geology》2015,65(4):346-360

Iheya‐North‐Knoll is one of the small knolls covered with thick sediments in the Okinawa Trough back‐arc basin. At the east slope of Iheya‐North‐Knoll, nine hydrothermal vents with sulfide mounds are present. The Integrated Ocean Drilling Program (IODP) Expedition 331 studied Iheya‐North‐Knoll in September 2010. The expedition provided us with the opportunity to study clay minerals in deep sediments in Iheya‐North‐Knoll. To reveal characteristics of clay minerals in the deep sediments, samples from the drilling cores at three sites close to the most active hydrothermal vent were analyzed by X‐ray diffraction, scanning electron microscope and transmission electron microscope. The sediments are classified into Layer 0 (shallow), Layer 1 (deep), Layer 2 (deeper) and Layer 3 (deepest) on the basis of the assemblage of clay minerals. Layer 0 contains no clay minerals. Layer 1 contains smectite, kaolinite and illite/smectite mixed‐layer mineral. Layer 2 contains chlorite, corrensite and chlorite/smectite mixed‐layer mineral. Layer 3 is grouped into three sub‐layers, 3A, 3B and 3C; Sub‐layer 3A contains chlorite and illite/smectite mixed‐layer mineral, sub‐layer 3B contains chlorite/smectite and illite/smectite mixed‐layer minerals, and sub‐layer 3C contains chlorite and illite. Large amounts of di‐octahedral clay minerals such as smectite, kaolinite, illite and illite/smectite mixed‐layer mineral are found in Iheya‐North‐Knoll, which is rarely observed in hydrothermal fields in mid‐ocean ridges. Tri‐octahedral clay minerals such as chlorite, corrensite and chlorite/smectite mixed‐layer mineral in Iheya‐North‐Knoll have low Fe/(Fe + Mg) ratios compared with those in mid‐ocean ridges. In conclusion, the characteristics of clay minerals in Iheya‐North‐Knoll differ from those in mid‐ocean ridges; di‐octahedral clay minerals and Fe‐poor tri‐octahedral clay minerals occur in Iheya‐North‐Knoll but not in mid‐ocean ridges.  相似文献