Effect of Aspect Ratio on the Monotonic Shear Behaviour: Micromechanical Interpretations     

S. D. Anitha Kumari  T. G. Sitharam 《Geotechnical and Geological Engineering》2013,31(5):1543-1553

The effect of aspect ratio on the mechanical behaviour and micromechanics of two different assemblies during drained triaxial shearing are reported in this paper. Discrete element simulations are done on two different sets of assemblies—first assembly consists of particles with aspect ratio 1.0 and second assembly consists of particles with aspect ratio 1.5. A log normal distribution of particle size is adopted for both the samples. The constitutive behaviour of the assemblies and the evolution of the microstructure of the samples under shearing are closely examined and is related to the aspect ratio of the particles constituting the assembly. The spherical harmonic distributions of contact forces and contact normals along with 3-D histograms are plotted to give quantitative information of the variation of these parameters as the loading progresses. The results indicate that as the aspect ratio increases, there is an increase in the maximum deviatoric stress at the macroscopic level. At the microscopic level, the values of the anisotropic coefficients which are representative of the microparameters also show an increase in the magnitude for the assembly with higher aspect ratio particles.  相似文献   

Anoxia over the western continental shelf of India: bacterial indications of intrinsic nitrification feeding denitrification     

Krishnan KP  Fernandes SO  Loka Bharathi PA  Krishna Kumari L  Nair S  Pratihary AK  Rao BR 《Marine environmental research》2008,65(5):445-455

Studies on the Arabian Sea coastal anoxia have been of immense interest, but despite its ecological significance there is sparse understanding of the microbes involved. Hence, observations were carried out off Goa (15 degrees 30'N, 72 degrees 40'E to 15 degrees 30'N, 72 degrees 59'E) to understand the processes that mediate the changes in various inorganic nitrogen species in the water column during anoxia. Water column chemistry showed a clear distinct oxic environment in the month of April and anoxic condition in October. Our study based on microbial signatures indicated that oxygen deficit appeared as a well-defined nucleus almost 40 km away from the coast during the oxic period (April) and spreads there after to the entire water column synchronizing with the water chemistry. Striking results of net changes in inorganic nitrogen species in nitrification blocked and unblocked experimental systems show that denitrification is the predominant process in the water column consuming available nitrate ( approximately 0.5 microM) to near zero levels within approximately 72 h of incubation. These observations have been supported by concomitant increase in nitrite concentration ( approximately 4 microM). Similar studies on denitrification-blocked incubations, demonstrate the potential of nitrification to feed denitrification. Nitrification could contribute almost 4.5 microM to the total nitrate pool. It was found that the relation between ammonium and total dissolved inorganic nitrogen (DIN) pool (r=0.98, p<0.001, n=122) was significant compared to the latter with nitrite and nitrate. The occurrence of high ammonium under low phosphate conditions corroborates our observations that ammonium does not appear to be locked under low oxygen regimes. It is suggested that ammonium actively produced by detrital breakdown (ammonification) is efficiently consumed through nitrification process. The three processes in concert viz. ammonification, nitrification and denitrification appear to operate in more temporal and spatial proximity than hitherto appreciated in these systems and this gives additional cues on the absence of measurable nitrate at surface waters, which was earlier attributed only to efficient algal uptake. Hence we hypothesize that the alarming nitrous oxide input into the atmosphere could be due to high productivity driven tighter nitrification-denitrification coupling, rather than denitrification driven by extraneous nitrate.  相似文献   

Induced degradation of crude oil mediated by microbial augmentation and bulking agents   总被引：1，自引：1，他引：0  

B. Kumari  S. N. Singh  D. P. Singh 《International Journal of Environmental Science and Technology》2016,13(4):1029-1042

Different bacterial and fungal strains, isolated from petroleum hydrocarbon-contaminated soil, were tested, in isolation as well as in combination, for their ability to degrade total petroleum hydrocarbon (TPH) in soil samples spiked with crude oil (2, 5 or 10 %, w/w) for 30 days. The selected combination of bacterial and fungal isolates, i.e., Pseudomonas stutzeri BP10 and Aspergillus niger PS9, exhibited the highest efficiency of TPH degradation (46.7 %) in soil spiked with 2 % crude oil under control condition. Further, when this combination was applied under natural condition in soil spiked with 2 % (w/w) crude oil along with inorganic fertilizers (NPK) and different bulking agents such as rice husk, sugarcane, vermicompost or coconut coir, the percent degradation of TPH was found to be maximum (82.3 %) due to the presence of inorganic fertilizers and rice husk as bulking agent. Further, results showed that the presence of NPK and bulking agents induced the activity of degradative enzymes, such as catalase (0.718 m mol H₂O₂ g^?1), laccase (0.77 µmol g^?1), dehydrogenase (37.5 µg g^?1 h^?1), catechol 1, 2 dioxygenase (276.11 µ mol g^?1) and catechol 2, 3 dioxygenase (15.15 µ mol g^?1) as compared to control (without bioaugmentation). It was inferred that the selected combination microbes along with biostimulants could accentuate the crude oil degradation as evident from the biostimulant-induced enhanced activity of degradative enzymes.  相似文献   

Fine-grained landuse characterization using ground-based pictures: a deep learning solution based on globally available data   总被引：1，自引：0，他引：1  

Shivangi Srivastava  John E. Vargas Muñoz  Sylvain Lobry  Devis Tuia 《International journal of geographical information science》2020,34(6):1117-1136

ABSTRACT

We study the problem of landuse characterization at the urban-object level using deep learning algorithms. Traditionally, this task is performed by surveys or manual photo interpretation, which are expensive and difficult to update regularly. We seek to characterize usages at the single object level and to differentiate classes such as educational institutes, hospitals and religious places by visual cues contained in side-view pictures from Google Street View (GSV). These pictures provide geo-referenced information not only about the material composition of the objects but also about their actual usage, which otherwise is difficult to capture using other classical sources of data such as aerial imagery. Since the GSV database is regularly updated, this allows to consequently update the landuse maps, at lower costs than those of authoritative surveys. Because every urban-object is imaged from a number of viewpoints with street-level pictures, we propose a deep-learning based architecture that accepts arbitrary number of GSV pictures to predict the fine-grained landuse classes at the object level. These classes are taken from OpenStreetMap. A quantitative evaluation of the area of Île-de-France, France shows that our model outperforms other deep learning-based methods, making it a suitable alternative to manual landuse characterization.  相似文献   

Production of Bauxite Certified Reference Material (BARC-B1201) for Nine Property Values (Al2O3, Fe2O3, SiO2, TiO2, V2O5, MnO,Cr2O3, MgO and LOI) Traceable to SI Units     

Ankam Durga Prasad  Lori Rastogi  Vinod Kumar Verma  Vasudevan Krishna Kumari  Sudhakar Yadlapalli  Kulamani Dash 《Geostandards and Geoanalytical Research》2023,47(3):629-636

The National Centre for Compositional Characterisation of Materials (NCCCM) / Bhabha Atomic Research Centre (BARC) and National Aluminium Company Limited (NALCO), India have produced an Indian origin bauxite certified reference material (CRM), referred to as BARC-B1201, certified for major (Al₂O₃, Fe₂O₃, SiO₂, TiO₂, loss on ignition - LOI) and trace contents (V₂O₅, MnO, Cr₂O₃, MgO). Characterisation was undertaken by strict adherence to ISO Guides. A method previously developed and validated in our laboratory, using single step bauxite dissolution and subsequent quantitation (of Al₂O₃, Fe₂O₃, SiO₂, TiO₂, V₂O_5, MnO, Cr₂O₃ and MgO) by ICP-AES (SSBD ICP-AES) was used for homogeneity studies and an inter-laboratory comparison exercise (ILCE) of the candidate CRM. LOI was determined by thermo-gravimetric analysis. Property values were assigned after an ILCE with participation from seventeen reputed government and private sector laboratories in India. The CRM was certified for nine property values: Al₂O₃, Fe₂O₃, SiO₂, TiO₂, V₂O_5, MnO, Cr₂O₃, MgO and LOI, which are traceable to SI units.  相似文献   

Organization of amphiphiles, Part VIII: Role of polyoxyethylated alkylphenols in optimizing the beneficiation of hydrophilic mineral     

Pramila Kumari Misra  Sagarika Panigrahi  P. Somasundaran 《International Journal of Mineral Processing》2006,80(2-4):229-237

The floatability of silica has been determined by adsorbing various concentrations of a series of polyoxyethylated nonyl and octyl alkyl phenols of varying oxyethylene units (10–40 units) to investigate the role of adsorbed layer. It is seen that the floatability of silica increases with increase in concentration till a maximum of  90% in premicellar region and then decrease to minimum of 40–45% in all cases in spite of the significant differences in adsorption densities. Zeta potential measurement reveals that a thin oxyethylene layer is formed at silica–water interface masking silica surface (Pramila K. Misra, P. Somasundaran, J. Surf. Deterg., Vol. 7, 2004, 373). This layer with oxyethylene units lying on silica surface and alkyl chain dangling to the bulk solution provides the same extent of hydrophobicity. The decrease in flotation recovery has been attributed to increase in the solvent hydrophobicity due to formation of premicellar aggregates and micelles.  相似文献   

Estimation of atmospheric surface layer parameters and numerical simulation using MM5 at Mangalore, West Coast of India     

Anitha Kumari Hegde  R. Venkatesan  C. V. Srinivas  K. M. Balakrishna 《Meteorology and Atmospheric Physics》2010,107(3-4):161-172

Atmospheric surface layer meteorological observations obtained from 20-m-high meteorological tower at Mangalore, situated along the west coast of India are used to estimate the surface layer scaling parameters of roughness length (z _o) and drag coefficient (C _D), surface layer fluxes of sensible heat and momentum. These parameters are computed using the simple flux–profile relationships under the framework of Monin–Obukhov (M–O) similarity theory. The estimated values of z _o are higher (1.35–1.54 m) than the values reported in the literature (>0.4–0.9 m) probably due to the undulating topography surrounding the location. The magnitude of C _D is high for low wind speed (<1.5 m s^?1) and found to be in the range 0.005–0.03. The variations of sensible heat fluxes (SHF) and momentum fluxes are also discussed. Relatively high fluxes of heat and momentum are observed during typical days on 26–27 February 2004 and 10–11 April 2004 due to the daytime unstable atmospheric conditions. Stable or near neutral conditions prevail after 1700 h IST with negative SHF. A mesoscale model PSU/NCAR MM5 is run using a high-resolution (1 km) grid over the study region to examine the influence of complex topography on the surface layer parameters and the simulated fluxes are compared with estimated values. Spatial variations of the frictional velocity (u _*), C _D, surface fluxes, planetary boundary layer (PBL) height and surface winds are noticed according to the topographic variations in the simulation.  相似文献   

Late Cretaceous mafic dykes in the Dharwar craton     

Anil Kumar  Y J Bhaskar Rao  V M Padma Kumari  A M Dayal  K Gopalan 《Journal of Earth System Science》1988,97(1):107-114

Palaeomagnetic, geochemical and geochronological studies have been conducted on a set of dolerite dykes intruding the Peninsular gneisses near Huliyurdurga town, Karnataka, as a reconnaissance survey indicated a Cretaceous age for them. The dykes are mainly tholeiitic in composition with their 87Sr/86Sr ratios tightly clustered around 0·7045. Their palaeomagnetic data (D _m =329°,I _m =−55°) and the corresponding palaeopole coordinates (λ _p = 34°S,L _p =108°E) are strikingly close to those of the Deccan Traps to the north. Whole rock K-Ar ages of these dykes ranging between 69 and 84 Ma are also similar to the range of K-Ar ages of the Deccan basalts. The chemical, palaeomagnetic and temporal coherence between the dykes and the Deccan basalts indicate that they may indeed be tectonically related events.  相似文献   

Identification of Suitable Hydrological Models for Streamflow Assessment in the Kangsabati River Basin,India, by Using Different Model Selection Scores     

Kumari  Nikul  Srivastava  Ankur  Sahoo  Bhabagrahi  Raghuwanshi  Narendra Singh  Bretreger  David 《Natural Resources Research》2021,30(6):4187-4205

The increasing demand for water in developing countries, like India, requires efficient water management and resource allocation. This is crucial to accurately assess and predict hydrological processes such as streamflow, drought, and flood. However, simulations of these hydrologic processes from various hydrological models differ in their accuracy. By analyzing different characteristics of hydrological models, selection scores can be used to select the best model for the intended purpose based on their inherit strengths (i.e., some models are better for streamflow prediction). In this study, 13 different criteria were used for the model selection scores including temporal and spatial resolutions, and processes involved. Thereafter, based on different scores, we selected two different hydrological models for streamflow prediction in the Kangsabati River Basin (KRB) in eastern India, namely (1) Génie Rural à 4 paramètres Journalier (GR4J), a conceptual model, and (2) Variable Infiltration Capacity (VIC), a semi-distributed model. The models were calibrated against the daily observed streamflow at upper KRB (Reservoir) and lower KRB (Mohanpur) from 2000 to 2006 and validated during the period from 2008 to 2010. Despite the differences in model structure and data used, both models simulated streamflow at a daily time scale with Nash–Sutcliffe coefficient of 0.71–0.82 for the VIC model and 0.63–0.71 for the GR4J. Due to the simpler structure, parsimonious nature, fewer parameters, and reasonable accuracy, the results suggest that a conceptual rainfall—runoff model like GR4J can be used in data-deficient conditions.

  相似文献   

A comparative evaluation of groundwater suitability for irrigation and drinking purposes in two intensively cultivated districts of Punjab, India   总被引：8，自引：0，他引：8  

Manish Kumar  Kalpana Kumari  AL. Ramanathan  Rajinder Saxena 《Environmental Geology》2007,53(3):553-574

Punjab is the most cultivated state in India with the highest consumption of fertilizers. Patiala and Muktsar districts are two agricultural dominated districts of Punjab located in extreme south-east and south-west of the state. This paper highlights temporal variations of the groundwater quality and compares its suitability for irrigation and drinking purpose in these two districts. Water samples were collected in March and September 2003, representing the pre-monsoon and post-monsoon seasons, respectively. Water samples were analysed for almost all major cations, anions, dissolved heavy metals and turbidity. Parameters like sodium adsorption ratio, % sodium, residual sodium carbonate, total hardness, potential salinity, Kelley’s ratio, magnesium ratio, index of base exchange and permeability index were calculated on the basis of chemical data. A questionnaire was also used to investigate perception of villagers on taste and odour. Comparison of the concentration of the chemical constituents with WHO (world health organization) drinking water standards of 2004 and various classifications show that present status of groundwater in Patiala is better for irrigation and drinking purposes except for a few locations with a caution that it may deteriorate in near future. In Muktsar, groundwater is not suitable for drinking. Higher total hardness (TH) and total dissolved solids at numerous places indicate the unsuitability of groundwater for drinking and irrigation. Results obtained in this forms baseline data for the utility of groundwater. In terms of monsoon impact, Patiala groundwater shows dilution and flushing but Muktsar samples show excessive leaching of different chemical components into the groundwater leading to the enrichment of different anions and cations indicating pollution from extraneous sources. No clear correlation between the quality parameters studied here and perceived quality in terms of satisfactory taste response were obtained at electrical conductivity values higher than the threshold minimum acceptable value.  相似文献