Occurrence,chemistry, and origin of immiscible silicate glasses in a tholeiitic basalt: A TEM/AEM study     

Lung -Chuan Kuo  Jung H. Lee  Eric J. Essene  Donald R. Peacor 《Contributions to Mineralogy and Petrology》1986,94(1):90-98

The occurrence and chemistry of immiscible silicate glasses in a tholeiite mesostasis from the Umtanum formation, Washington, were investigated with transmission electron microscopy and analytical electron microscopy (TEM/AEM). TEM observation reveals isolated, dark globules (2.1 micron or less in diameter) randomly distributed in a transparent matrix glass interstitial to plagioclase laths. The globules less than 0.3 micron and larger than 0.8 micron fall beyond the linear relationship defined by the 0.3–0.8 micron globules in a plot of the logarithm of number versus size. Large globules (0.7 micron or larger in diameter) range from homogeneous to heterogeneous in optical properties and chemistry. Homogeneous globules are completely glassy, whereas heterogeneous globules contain crystalline domains. AEM analyses show that the globules have high Si, Fe, Ca, and Ti with subordinate Mg, Al, P, S, Cl, K, and Mn, which gives high normative fa, px, il, and ap. The matrix glass consists dominantly of Si with low Al and minor Na and K, yielding a high normative qz, or, ab, and an.It is proposed that the silicate liquid immiscibility occurs by reaction of network-modifying cations (NMCs) with dominantly chain-like anionic units in the parental melt to form less polymerized, NMC-bearing units and highly polymerized, Si-rich units. The globules nucleated metastably under supercooled conditions, and medium-size globules become either larger or smaller at lower temperatures. Internal nucleation of NMC-rich phases occurred in some larger globules upon cooling.  相似文献   

Phytoplankton dynamics within Gulf Stream intrusions on the southeastern United States continental shelf during summer 1981     

James A. Yoder  Larry P. Atkinson  S. Stephen Bishop  Jackson O. Blanton  Thomas N. Lee  Leonard J. Pietrafesa 《Continental Shelf Research》1985,4(6):611-635

During July and August 1981 subsurface intrusion of upwelled nutrient-rich Gulf Stream water was the dominant process affecting temporal and spatial changes in phytoplankton biomass and productivity of the southeastern United States continental shelf between 29 and 32°N latitude. Intruded waters in the study area covered as much as 10¹ km including virtually all of the middle and outer shelf and approximately 50% of the inner shelf area.Within 2 weeks following a large intrusion event in late July, middle shelf primary production and Chl a reached 3 to 4 gC m⁻ d⁻¹ and 75 mg m⁻, respectively. At the peak of the bloom 80% of the water column primary production occurred below the surface mixed-layer, and new primary production (i.e., NO₃-supported) exceeded 90% of the total. Chl a-normalized photosynthetic rates were very high as evidenced by high mean assimilation number (15.5 mg C mg Chl a⁻¹ h⁻¹), high mean α (14 mg C mg Chl a⁻¹ Ein⁻¹ m), and no photoinhibition. As a result of the high photosynthetic rates, mean light-utilization index (Ψ) was 2 to 3 times higher than reported for temperature sub-arctic and arctic waters.The results imply a seasonal (June to August) middle shelf production of 150 g C m⁻¹, about 15% higher than previous estimates of annual production on the middle shelf. Intrusions of the scale we observed in 1981 may not occur every summer. However, when such events do occur, they are by far the most important processes controlling summer phytoplankton dynamics of the middle and outer shelf and of the inner shelf in the southern half of the study area.  相似文献   

Isolation of diagenetic overgrowths on quartz sand grains for oxygen isotopic analysis     

Mingchou Lee  Samuel M. Savin 《Geochimica et cosmochimica acta》1985,49(2):497-501

Diagenetic overgrowths on detrital quartz sand grains in sandstones can be isolated for direct measurement of their oxygen isotope ratios. Interfacial materials between detrital cores and diagenetic overgrowths are dissolved by etching with dilute HF. The weakened interface breaks when grains are agitated ultrasonically. Subsequent particle size separation is an effective means of concentrating the diagenetic component.  相似文献   

Dynamic response of twin circular tunnels due to incident SH-waves     

Thambirajah Balendra  David P. Thambiratnam  Chan Ghee Koh  Seng-Lip Lee 《地震工程与结构动力学》1984,12(2):181-201

The steady-state solution for two parallel under ground tunnels of circular cross-section subjected to incident plane harmonic SH-waves is obtained in closed form, by using the method of wave function expansion. The image technique is employed to account for the reflection of waves at the ground surface. Numerical studies are carried out to determine the influence of spacing between the tunnels on the shear stresses in concrete and steel linings.  相似文献   

Prediction of surface potential temperature over complex terrain     

H. N. Lee  W. S. Kau 《Boundary-Layer Meteorology》1984,28(1-2):79-87

Based on a statistical approach, the surface potential temperature at seven observing stations in complex terrain has been examined. It is shown that the surface potential temperature depends primarily on the rate of change of slope wind and on the geostrophic-level potential temperature.  相似文献   

Neutron and electromagnetic emissions during the 1990 May 24 solar flare     

L. G. Kocharov  Jeongwoo W. Lee  H. Zirin  G. A. Kovaltsov  I. G. Usoskin  K. R. Pyle  M. A. Shea  D. F. Smart 《Solar physics》1994,155(1):149-170

In this paper, we are primarily concerned with the solar neutron emission during the 1990 May 24 flare, utilizing the counting rate of the Climax neutron monitor and the time profiles of hard X-rays and γ-rays obtained with the GRANAT satellite (Pelaezet al., 1992; Talonet al., 1993; Terekhovet al., 1993). We compare the derived neutron injection function with macroscopic parameters of the flare region as obtained from theHα and microwave observations made at the Big Bear Solar Observatory and the Owens Valley Radio Observatory, respectively. Our results are summarized as follows: (1) to explain the neutron monitor counting rate and 57.5–110 MeV and 2.2 MeV γ-ray time profiles, we consider a two-component neutron injection function,Q(E, t), with the form $$Q(E,t) = N_f {\text{ exp[}} - E/E_f - t/T_f ] + N_s {\text{ exp[}} - E/E_s - t/T_s ],$$ whereN _f(s),E _f(s), andT _f(s) denote number, energy, and decay time of the fast (slow) injection component, respectively. By comparing the calculated neutron counting rate with the observations from the Climax neutron monitor we derive the best-fit parameters asT _f ≈ 20 s,E _f ≈ 310 MeV,T _s ≈ 260 s,E _s ≈ 80 MeV, andN _f (E > 100 MeV)/N _s (E > 100 MeV) ≈ 0.2. (2) From the Hα observations, we find a relatively small loop of length ≈ 2 × 10⁴ km, which may be regarded as the source for the fast-decaying component of γ-rays (57.5–110 MeV) and for the fast component of neutron emission. From microwave visibility and the microwave total power spectrum we postulate the presence of a rather big loop (≈ 2 × 10⁵ km), which we regard as being responsible for the slow-decaying component of the high-energy emission. We show how the neutron and γ-ray emission data can be explained in terms of the macroscopic parameters derived from the Hα and microwave observations. (3) The Hα observations also reveal the presence of a fast mode MHD shock (the Moreton wave) which precedes the microwave peak by 20–30 s and the peak of γ-ray intensity by 40–50 s. From this relative timing and the single-pulsed time profiles of both radiations, we can attribute the whole event as due to a prompt acceleration of both electrons and protons by the shock and subsequent deceleration of the trapped particles while they propagate inside the magnetic loops.  相似文献   

Geostatistical integration of MT and borehole data for RMR evaluation     

Seokhoon Oh  Hojoon Chung  Duk Kee Lee 《Environmental Geology》2004,46(8):1070-1078

The geostatistical approach was applied to integrate MT (Magneto-telluric) resistivity data and borehole information for the spatial RMR (Rock Mass Rating) evaluation. Generally, resistivity of the subsurface is believed to be positively related to the RMR, thus the resistivity and borehole RMR information was combined in a geostatistical approach. To relate the two different sets of data, the MT resistivity data were used as secondary information and the RMR mean values were estimated at unsampled points by identification of the resistivity to the borehole data. Two types of approach are performed for the estimation of RMR mean values. Then the residuals of the RMR values around the borehole sites are geostatistically modeled to infer the spatial structure of difference between real RMR values and estimated mean values. Finally, this geostatistical estimation is added to the previous means. The result applied to a real situation shows prominent improvements to reflect the subsurface structure and spatial resolution of RMR information.  相似文献   

Capacity evaluation of statnamic tested long piles     

San-Shyan Lin  J. L. Hong  Wei F. Lee  Y. H. Chang 《Soil Dynamics and Earthquake Engineering》2004,24(11):829-838

A procedure that uses the structural damping (SD) concept for estimating the capacity of a pile based on the Statnamic (STN) pile load test results, formerly used by the authors for short piles, is extended in this paper for the STN tested long piles. Similar to segmental unloading point method procedures for long piles, the shaft length is divided into several segments and each segment is assumed to behave as a mass of a single degree of freedom. The SD concept is then applied to each segment to consider the displacement related soil damping instead of the velocity dependent damping. Instrumented strain gauge data at different levels of the shaft are required for the interpretation method. Three case studies are presented in this paper to study the validity and applicability of the present method. The predicted results are also compared to the available test or analytical data.  相似文献   

Principal axes of M-DOF structures Part Ⅱ: Dynamic loading     

Zach Liang  George C.Lee 《地震工程与工程振动(英文版)》2003,2(1)

This paper is the second in a two-part series that discusses the principal axes of M-DOF structures subjected to static and dynamic loads. The primary purpose of this series is to understand the magnitude of the dynamic response of structures to enable better design of structures and response modification devices/systems. Under idealized design conditions, the structural responses are obtained by using single direction input ground motions in the direction of the intended response modification devices/systems, and by assuming that the responses of the structure is decoupleable in three mutually perpendicular directions. This standard practice has been applied to both new and retrofitted structures using various seismic protective systems. Very limited information is available on the effects of neglecting the impact of directional couplings (cross effects of which torsion is a component) of the dynamic response of structures. In order to quantify such effects, it is necessary to examine the principal axes of structures under both static and dynamic loading. In this two-part series, the first paper is concerned with static loading, which provides definitions and fundamental formulations, with the conclusion that cross effects of a statically loaded M-DOF structure resulting from the lack of principal axes are of insignificant magnitude. However, under dynamic or earthquake loading, a relatively small amount of energy transferred across perpendicular directions is accumulated, which may result in significant enlargement of the structural response. This paper deals with a formulation to define the principal axes of M-DOF structures under dynamic loading and develops quantitative measures to identify cross effects resulting from the non-existence of principal axes.  相似文献   

Radiaxial fibrous calcites as low-magnesian calcite cement precipitated in a marine-meteoric mixing zone   总被引：1，自引：0，他引：1  

Yongin Kim  Yong Il Lee 《Sedimentology》2003,50(4):731-742

Abstract Radiaxial fibrous calcite (RFC) has previously been interpreted as a marine or replacive cement. Study of the Dongjeom Formation (Early Ordovician), Korea, shows that RFC can form in marine‐meteoric mixing zones as a low‐magnesian calcite (LMC) cement. RFC in the shallow‐marine Dongjeom Formation occurs in arenaceous limestones at the top of a transgressive facies overlying a regressive facies. It shows well‐developed growth zonation, and lighter oxygen isotope values and more radiogenic strontium isotope ratios than those of Early Ordovician marine calcite. Such petrographic and chemical evidence indicates that the RFC was precipitated as a primary LMC cement in a marine and meteoric mixing zone. Owing to the unique environment of formation, the Dongjeom RFC is characterized by growth zonal fabric comprising alternating subzones, which may indicate precipitation from varying fluids. In addition, this study documents the importance of substrate for development of RFC. Early ‘nucleation’ for RFC occurred mainly on microcrystalline skeletal grains and internal sediments, whereas on homogeneously altered substrates, thin‐coated banding structure developed, ultimately forming coarse crystalline spar. This suggests that microcrystalline substrates are preferred sites for nucleation of RFC.  相似文献