Micro Computers Applied to Ground Water Monitoring and Testing     

Larry K. Brqnnaka  Lawrence R. Keefe 《Ground Water Monitoring & Remediation》1986,6(2):135-139

Micro computers have been demonstrated to be a most valuable, cost-effective means of long- and short-term data acquisition for ground water investigations and installations. A system can readily be assembled for the cost of labor saved in the field, or for the same cost as other conventional instruments, which perform only a fraction of the functions of the computer system
Documented in this article are systems which have been developed and used for simultaneous monitoring of several wells during aquifer tests, and systems installed for long-term monitoring of piezometric surface fluctuations. Both systems can be contained in a small suitcase or insulated cooler. Specific features of the systems include multiple channel capacity, one-month maintenance period, variable computer controlled reading intervals, magnetic tape data storage, data reduction and analysis capabilities while maintaining monitoring, graphic display of time and measurements, hard copy capability and barometric pressure change corrections.
Other applications are examined for the complete control of pumping tests, including pumping rate; in situ permeability tests; monitoring changes; and even strain. The pressure transducer system may also be applied for river gauging and current measurement.  相似文献   

Quantitative chemical characterization of vitrinite concentrates using pyrolysis-gas chromatography. Rank variation of pyrolysis products     

J.T. Senftle  S.R. Larter  B.W. Bromley  J.H. Brown 《Organic Geochemistry》1986,9(6)

A series of hand-picked vitrinite samples from the Lower Kittanning Seam, Pennsylvania have been examined using quantitative pyrolysis-gas chromatography. These vitrinites ranged in rank from 0.59 to 1.71% reflectance, a rank range from high volatile C bituminous to low volatile bituminous. High molecular weight pyrolysis products included alkyl aromatic and phenolic compounds. Attempts have been made to correlate the pyrolysis product composition to rank parameters including vitrinite reflectance, volatile matter yield, carbon content, atomic H/C ratio and Rock-Eval determined T_max. Total yield of phenols was found to be strongly and inversely rank related. A clear relationship between C₈ alkyl-benzene yield and rank was not found for the sample set.  相似文献   

A petrographic and fluid inclusion comparison of silver-poor and silver-rich zinc-lead ores,N.E. Washington State     

Philip E. Brown  Gaafar A. Ahmed 《Mineralium Deposita》1986,21(2):156-163

Many of the zinc-lead deposits of NE Washington State are poorly known examples of Mississippi Valley Type (MVT) mineralization. This study compares inclusion fluids from the Josephine Breccia ores with the later cross-cutting sulfide-bearing quartz veins. The breccia ores are cemented mainly by open space fillings of dolomite, sphalerite, quartz, galena, jasperoid and calcite. Replacement is of minor importance. Ore and gangue deposition occurred over the range 150–250 °C with most of the temperatures less than 200 °C. The aqueous brines typically contain 17–23 equivalent weight percent NaCl with often substantial amounts of Ca and/or Mg chlorides. Homogenization temperatures do not delineate any cooling or paragenetic sequence. The cross-cutting vein quartz contains CO₂-rich inclusions with overall densities usually less than 0.7 g/cc and homogenization temperatures from 250–325 °C. Sulfur isotope analyses yield two populations with the quartz vein ores being lighter (<13 permil CDT) than the average for the conformable ores. The later veins are not remobilized MVT sulfides but represent a separate, high-silver period of mineralization.  相似文献   

Determination of evaporation from integrated profiles of humidity and temperature over an inhomogeneous surface     

Lawrence E. Hipps  David F. Zehr 《Boundary-Layer Meteorology》1995,75(3):287-299

In this study a moderate-sized alfalfa field was downwind of a large dry region. Measured vertical profiles of temperature, humidity and wind at upwind and downwind sides of the field were used to calculate the short-term evaporation rate, as well as the contribution of horizontally transported or advected heat energy to the evaporation. The vertical profiles must be measured at least to the height at which air is modified by the new surface. In this case that height was as large as 18 m over a several hundred meter long traverse.Evaporation rates calculated by such an approach were in very close agreement to surface fluxes measured by an eddy correlation system near the surface. The difference between calculated and measured values averaged 9.5%. The reduction in sensible heat content of the air of the control volume was substantial during passage over the field. If all this energy was assumed to have been used in evaporation, then the advection of heat contributed from 35 to 86% of the total evaporation rate.It appears that for an inhomogeneous surface, knowledge of the distortion of some properties of local boundary layers can yield reliable estimates of local evaporation. The approach has little empiricism as it is based on simple conservation laws.  相似文献   

Bank conditions and erosion along selected reservoirs     

Lawrence W. Gatto  William W. Doe III 《Environmental Geology》1987,9(3):143-154

This analysis was done as the preliminary step in an ongoing study of reservoir bank erosion processes that are active in the northern U.S. The objectives of this analysis were to observe and document bank characteristics, conditions, and changes along reservoirs with eroding banks, to estimate the amounts of historical bank recession and to discuss its possible causes. Aerial photographs were used to observe the historical bank changes and estimate bank recession. Site reconnaissance, discussions with on-site personnel, and published reports were used to evaluate possible relationships between the local erosion and bank conditions. As part of this analysis linear regressions were done to determine if the estimated recession rates correlate with selected bank and climatic conditions and with physical characteristics of the reservoirs. The regression results, however, were generally not useful because they suggested relationships that are contrary to field observations and published results. Dominant bank erosion processes were wind-wave erosion, capillary wave erosion during high-water periods, groundwater-induced sliding, freeze-thaw processes, rain splash and rainwash, and boat waves. However, because of the complexity of the interrelationships of these and many other bank erosion processes and the variability of the processes at and between sites, it would be necessary to make site-specific measurements and observations year-round to evaluate the processes that are active along a particular bank.  相似文献   

Identification of Recharge Areas Using Geochemical Factor Analysis   总被引：8，自引：0，他引：8  

Fred W. Lawrence  Sam B. Upchurch 《Ground water》1982,20(6):680-687

  相似文献   

The ilmenite/titano-magnetite assemblage: kinetics of re-equilibration     

Patrick A. Hammond  Lawrence A. Taylor 《Earth and Planetary Science Letters》1982,61(1):143-150

Compositions of coexisting ilmenite and titano-magnetite commonly have been used to establish the conditions of formation for igneous and metamorphic rocks (Buddington-Lindsley geothermometer/oxybarometer). Temperatures so determined for some rocks are lower than might be expected for magmatic crystallization. These low temperatures are the result of re-equilibration of the Fe-Ti oxides during slow cooling. This process is one in which titano-magnetites are oxidized and ilmenites are reduced upon cooling along a buffer curve or in the presence of a fluid of constant composition. Textural studies indicate that the reduction of the ilmenite-hematite phase may be the slower reaction consequently, the rate-controlling step of the re-equilibration.The kinetics of the reduction reactions in the two-phase region between the joins for the ilmenite-hematite and magnetite-ulvöspinel solid solution series were studied by thermogravimetric analysis at controlledf_O2. With experiments conducted near the Ni/NiO and QFM buffers, annealed ilmenite(ss) synthetic charges were reduced isothermally. The temperature range for the experiments was 900–1250°C, with total gas-flow rates of 0.35 and 1.0 cm/s. Kinetic data were collected by measuring the weight change during each experiment as a function of time. Additionally, a cooling-rate (0.5°C/hr) experiment was conducted near the QFM buffer from 1150 to 985°C starting with an ilmenite-saturated spinel phase.At 1200°C and 0.35 cm/s flow rate, the reaction mechanism is an interfacial process where mass transport of the reacting gases is the rate-controlling step. In isothermal experiments at 1100°C and lower, diffusion of reactants through a solid product layer was the controlling mechanism. The activation energy for this diffusion process is 59±6 kcal/mole. Significant enhancement of diffusion occurs along grain boundaries.Although the individual phases may re-equilibrate internally upon cooling, the Fe-Ti contents must remain unchanged for proper use of this mineral indicator-i.e. no external re-equilibration. It is imperative that the kinetics of the situation be appreciated. These preliminary kinetic experiments indicate that extreme caution must be exercised when applying this ilmenite/titano-magnetite geothermometer/oxybarometer. These phases may only truly “quench” in the parameters of formation in the case of certain hypabyssal and extrusive occurrences  相似文献   

Effects of a change of terrain height and roughness on a wind profile     

R. L. Schwiesow  R. S. Lawrence 《Boundary-Layer Meteorology》1982,22(1):109-122

We have measured profiles of an onshore wind 200 m upwind and 200 m downwind from an abruptly rising shore using a remote-sensing Doppler lidar anemometer. Data were taken at heights between 4.7 and 66.5 m above sea level. Results show that the onshore velocity vector slopes upward 16.6 to 9.6°, the amount depending on the height of measurement, due to the combined effects of a 1.7-m high bluff shoreline and the frictionally decelerated flow over land. The profile 200 m inland has the expected deceleration at lower levels because of increased surface roughness and implies a velocity vector at 66.5 m height with an upward slope of approximately 18° (2.6 m s^-1 upward component, 8.4 m s^-1 vector magnitude), an acceleration to 0.3 m s^-1 greater than the upwind value, or a combination of both effects. All three options are consistent with mass continuity. The experiment exhibits the usefulness and limitations of a backscatter Doppler lidar for boundary-layer profile measurements in a horizontally inhomogeneous environment.  相似文献   

The American oyster as a coastal zone pollution monitor: A pilot study     

Geoffrey I. Scott  David R. Lawrence 《Estuaries and Coasts》1982,5(1):40-46

The Condition Index [(dry meat weight)(100)/(internal cavity volume)] has been analyzed and compared in the American oyster,Crassostrea virginica, from two South Carolina estuaries, one of which was considered polluted by coliform bacteria standards. During the warmer months, oysters from the unpolluted habitat showed a consistently and significantly higher Condition Index. Best fit and power function regressions of Condition Index on total coliform bacteria levels conform with previously cited effects of pollutants on oysters. Condition Index droped markedly as the incidence of total coliforms increased toward levels of 100 per 100 ml of water. Our results and the known sensitivity of oysters to a spectrum of pollutants suggest that their condition could be used to monitor waterborne pollution in coastal zone areas.  相似文献   

Retention of riverine iron in estuaries     

Lawrence M. Mayer 《Geochimica et cosmochimica acta》1982,46(6):1003-1009

Retention of Fe flocs, resulting from the mixing of river water and seawater, was examined in three Maine estuaries. Riverine Fe was found to remain fairly conservative with salinity, implying that the process of floccufation does not necessarily remove Fe from water parcels. Laboratory experiments corroborated the field data by demonstrating that neither gravity nor suspended sediment were very effective in removing flocculated Fe from suspension. However, input of a tannery effluent did appear to result in scavenging of Fe from estuarine waters. Flocculated riverine Fe was found to increase considerably the Fe concentrations of estuarine bottom sediments, with the amount of iron per sediment specific surface area dependent on mean river flow entering an estuary. While no long term retention efficiencies could be calculated for these estuaries, it seems likely that a significant portion of flocculated riverine Fe escapes to shelf waters.  相似文献