Phase characteristic analysis of continuous depth air-gun source wavelet     

Lei Xing  Huaishan Liu  Xilai Zheng  Xueqin Liu  Jin Zhang  Linfei Wang  Zhihui Zou  Yiming Xu 《中国海洋大学学报(英文版)》2016,15(5):815-824

Air guns are important sources for marine seismic exploration. Far-field wavelet of air gun arrays, as a necessary parameter for pre-stack processing and source models, plays an important role during marine seismic data processing and interpretation. When an air gun fires, it generates a series of air bubbles. Similar to onshore seismic exploration, the water forms a plastic fluid near the bubble; the farther the air gun is located from the measurement, the more steady and more accurately represented the wavelet will be. In practice, hydrophones should be placed more than 100 m from the air gun; however, traditional seismic cables cannot meet this requirement. On the other hand, vertical cables provide a viable solution to this problem. This study uses a vertical cable to receive wavelets from 38 air guns and data are collected offshore Southeast Qiong, where the water depth is over 1000 m. In this study, the wavelets measured using this technique coincide very well with the simulated wavelets and can therefore represent the real shape of the wavelets. This experiment fills a technology gap in China.  相似文献   

Provenance of buried esker groundwater: the case of Vars-Winchester esker aquifer,Eastern Ontario,Canada     

Jacques Sauriol 《Hydrogeology Journal》2016,24(1):123-139

An innovative mode of groundwater recharge to a buried esker aquifer is considered. The current conceptual model affords a natural safeguard to underlying aquifers from the overlying muds. A hypothesis of groundwater recharge to a buried esker aquifer via preferential pathways across its overlying muds is tested here by heuristic numerical one-dimensional and two-dimensional modeling simulations. The hypothesis has been tested against two other conventionally accepted scenarios involving: (1) distal esker outcrop areas and (2) remote shallow-bedrock recharge areas. The main evidence comes from documented recharge pressure pulses in the overlying mud aquitard and in the underlying esker hydraulic-head time series for the Vars-Winchester esker aquifer in Eastern Ontario, Canada. These perturbations to the potentiometric surface are believed to be the aquifer response to recharge events. The migration rate of these pressure pulses is directly related to the hydraulic diffusivity of the formation. The measured response time and response amplitude between singular radar precipitation events and well hydrographs constituted the heuristic model calibration targets. The main evidence also includes mud-layering deformation (water escape features) which was observed in seismic surveys of the over-esker muds. These disturbed stratigraphic elements provide a realistic mechanism for migrating water to transit through the muds. The effective hydraulic conductivities of these preferential pathways in the muds were estimated to be between 2?×?10^?6 and 7?×?10^?6 m/s. The implications of these findings relate to the alleged natural safeguard of these overlying muds.  相似文献   

Enhanced bioremoval of refractory compounds from dyeing wastewater using optimized sequential anaerobic/aerobic process     

W. Bae  D. Han  E. Kim  R. A. de Toledo  K. Kwon  H. Shim 《International Journal of Environmental Science and Technology》2016,13(7):1675-1684

The upflow anaerobic sludge blanket process followed by the biological aerated filter process was employed to improve the removal of color and recalcitrant compounds from real dyeing wastewater. The highest removal efficiency for color was observed in the anaerobic process, at 8-h hydraulic retention time, seeded with the sludge granule. In the subsequent aerobic process packed with the microbe-immobilized polyethylene glycol media, the removal efficiency for chemical oxygen demand increased significantly to 75 %, regardless of the empty bed contact time. The average influent non-biodegradable soluble chemical oxygen demand was 517 mg/L, and the average concentration in effluent from the anaerobic reactor was 363 mg/L, suggesting the removal of some recalcitrant matters together with the degradable ones. The average non-biodegradable soluble chemical oxygen demand in effluent from the aerobic reactor was 87, 93, and 118 mg/L, with the removal efficiency of 76, 74, and 67 %, at 24-, 12-, and 8-h empty bed contact time, respectively. The combined anaerobic sludge blanket and aerobic cell-entrapped process was effective to remove the refractory compounds from real dyeing wastewater as well as in reducing organic loading to meet the effluent discharge limits. This integrated process is considered an effective and economical treatment technology for dyeing wastewater.  相似文献   

Bioadsorption by sugarcane bagasse for the reduction in oil and grease content in aqueous effluent     

H. T. Boni  D. de Oliveira  A. A. Ulson de Souza  S. M. A. G. Ulson de Souza 《International Journal of Environmental Science and Technology》2016,13(4):1169-1176

Several techniques have been used to reduce the oil and grease content in aqueous streams; one excellent is bioadsorption. With a view to provide a sustainable method for the treatment of oily effluents, the aim of this study was to evaluate sugarcane bagasse as bioadsorbent to reduce the oil and grease content of aqueous effluents. Analysis of the material was performed, and the adsorption experiments were in a batch system, using a synthetic effluent. The results showed that the kinetic equilibrium occurred in 0.08 h of contact. The study of influence of pH of the aqueous phase and the temperature showed that the adsorption capacity was proportional to the pH value, but inversely proportional to the temperature. The adsorption isotherm was obtained at a temperature of 298.15 K using the Langmuir and Langmuir–Freundlich models, and the maximum adsorption capacity obtained was 6.65 kg of hydrocarbon per kg of bioadsorbent. It was verified that sugarcane bagasse represents an excellent material for application in the treatment of oily aqueous effluents, since it is associated with low cost and a high adsorption capacity. The variation in the adsorption capacity observed as a function of pH of the aqueous phase was not found to be significant. This is an important characteristic of the material in terms of its industrial application, verifying the possibility for its implementation in any treatment process, demonstrating the great potential of sugarcane bagasse for use as a sustainable alternative in the reduction in oil and grease in aqueous effluents.  相似文献   

Prediction of ground vibration due to quarry blasting based on gene expression programming: a new model for peak particle velocity prediction   总被引：1，自引：1，他引：0  

R Shirani Faradonbeh  D Jahed Armaghani  M. Z. Abd Majid  M. MD Tahir  B. Ramesh Murlidhar  M. Monjezi  H. M. Wong 《International Journal of Environmental Science and Technology》2016,13(6):1453-1464

Blasting is a widely used technique for rock fragmentation in opencast mines and tunneling projects. Ground vibration is one of the most environmental effects produced by blasting operation. Therefore, the proper prediction of blast-induced ground vibrations is essential to identify safety area of blasting. This paper presents a predictive model based on gene expression programming (GEP) for estimating ground vibration produced by blasting operations conducted in a granite quarry, Malaysia. To achieve this aim, a total number of 102 blasting operations were investigated and relevant blasting parameters were measured. Furthermore, the most influential parameters on ground vibration, i.e., burden-to-spacing ratio, hole depth, stemming, powder factor, maximum charge per delay, and the distance from the blast face were considered and utilized to construct the GEP model. In order to show the capability of GEP model in estimating ground vibration, nonlinear multiple regression (NLMR) technique was also performed using the same datasets. The results demonstrated that the proposed model is able to predict blast-induced ground vibration more accurately than other developed technique. Coefficient of determination values of 0.914 and 0.874 for training and testing datasets of GEP model, respectively show superiority of this model in predicting ground vibration, while these values were obtained as 0.829 and 0.790 for NLMR model.  相似文献   

Enhancement of a hypoplastic model for granular soil–structure interface behaviour     

H. Stutz  D. Mašín  F. Wuttke 《Acta Geotechnica》2016,11(6):1249-1261

Modelling of interfaces in geotechnical engineering is an important issue. Interfaces between structural elements (e.g., anchors, piles, tunnel linings) and soils are widely used in geotechnical engineering. The objective of this article is to propose an enhanced hypoplastic interface model that incorporates the in-plane stresses at the interface. To this aim, we develop a general approach to convert the existing hypoplastic model with a predefined limit state surface for sands into an interface model. This is achieved by adopting reduced stress and stretching vectors and redefining tensorial operations which can be used in the existing continuum model with few modifications. The enhanced interface model and the previous model are compared under constant-load, stiffness and volume conditions. The comparison is followed by a verification of two the approaches for modelling the different surface roughness. Subsequently, a validation between available experimental data from the literature versus simulations is presented. The new enhanced model gives improved predictions by the incorporation of in-plane stresses into the model formulation.  相似文献   

Must critical state theory be revisited to include fabric effects?     

Yannis F. Dafalias 《Acta Geotechnica》2016,11(3):479-491

Critical state (CS) is a physically observed state of granular materials at failure, based on which the critical state theory (CST) was founded. CST attempts to describe analytically the material response when CS failure occurs and constitutes the framework within which constitutive modeling techniques have been developed in the last half-century. The conditions of CST defined as necessary and sufficient to characterize CS do not include fabric orientation of material samples. In the present work, this absence of fabric is discussed in light of a newly developed anisotropic critical state theory (ACST) that enhances the classical CST by introducing an additional condition that fabric must satisfy at CS. The use of ACST framework in constitutive modeling is presented in a generic way, usable in conjunction with various constitutive models that comply with CST. Answers to some fundamental questions are attempted or suggested, e.g., as to whether the conditions of classical CST are necessary and sufficient for CS to occur, whether the ACST is simply a convenient supplement to CST or a necessary enhancement, and if the latter is true, the merits and open questions that arise. The presentation focuses on the justification and thoughts behind the proposed specific features of ACST, provides clarifications not made before, while several suggestions and disclaimers are made, and alternate approaches are proposed for further investigations on the subject matter.  相似文献   

Autonomic visiting in digital 3D scenes     

Song Chen  Liang Cheng 《Earth Science Informatics》2016,9(3):383-400

Human-machine interactive visiting and fixed-route visiting are currently the main roaming modes in digital three-dimensional (3D) scenes. However, in general, when a person visits an attraction area, s/he does not follow a fixed path, but instead wander about according to his/her interests. Here, we propose a new roaming mode, called autonomic visiting. That is, in a digital 3D scene, a user selects several interest spots, then a route connecting these spots can be automatically determined and 3D scene can be seen along this route. This study presents a technical approach that enables the realization of autonomic visiting in 3D scenes. Firstly, Delaunay triangular meshes for the terrain in 3D scene are established. Secondly, a plane-growth algorithm and a line-connection algorithm are introduced to automatically mend the broken parts of these triangular meshes. Thirdly, the triangular meshes are then merged and differently weighted according to different layers. Finally, a progress-zone transmission algorithm is presented to optimal the shortest route, which is derived from A-Star (A*) algorithm. Digital 3D campus of Nanjing University, China, is taken as the experimental materials. The experimental results prove the effect of the proposed approach.  相似文献   

An experimental database for the development,calibration and verification of constitutive models for sand with focus to cyclic loading: part I—tests with monotonic loading and stress cycles     

Torsten Wichtmann  Theodoros Triantafyllidis 《Acta Geotechnica》2016,11(4):739-761

For numerical studies of geotechnical structures under earthquake loading, aiming to examine a possible failure due to liquefaction, using a sophisticated constitutive model for the soil is indispensable. Such a model must adequately describe the material response to a cyclic loading under constant volume (undrained) conditions, amongst others the relaxation of effective stress (pore pressure accumulation) or the effective stress loops repeatedly passed through after a sufficiently large number of cycles (cyclic mobility, stress attractors). The soil behaviour under undrained cyclic loading is manifold, depending on the initial conditions (e.g. density, fabric, effective mean pressure, stress ratio) and the load characteristics (e.g. amplitude of the cycles, application of stress or strain cycles). In order to develop, calibrate and verify a constitutive model with focus to undrained cyclic loading, the data from high-quality laboratory tests comprising a variety of initial conditions and load characteristics are necessary. The purpose of these two companion papers was to provide such database collected for a fine sand. The database consists of numerous undrained cyclic triaxial tests with stress or strain cycles applied to samples consolidated isotropically or anisotropically. Monotonic triaxial tests with drained or undrained conditions have also been performed. Furthermore, drained triaxial, oedometric or isotropic compression tests with several un- and reloading cycles are presented. Part I concentrates on the triaxial tests with monotonic loading or stress cycles. All test data presented herein will be available from the homepage of the first author. As an example of the examination of an existing constitutive model, the experimental data are compared to element test simulations using hypoplasticity with intergranular strain.  相似文献   

Shearing characteristics of SCP-inserted clay specimens in triaxial compression test     

Yoon-Sik Choo  Wanjei Cho  Choong-Ki Chung 《Acta Geotechnica》2016,11(1):209-219

Sand compaction piles (SCPs) have been widely applied to the construction on the soft ground for decades, due to not only the acceleration of the consolidation but also the enhancement of strength and stiffness of ground. However, physical behaviors of SCP-improved ground have not been clearly unveiled due to complex response of two distinct materials, compacted sand and soft clay, which are having quite different mechanical characteristics. Therefore, in this study, the mechanical characteristics of SCP composite ground were investigated via triaxial compression tests on SCP-inserted clay specimens. Tests were performed elaborately with four specimens with different replacement ratios. Based on the comparisons of consolidation and shearing behaviors of tested SCP-inserted clay specimens, the SCP effects on the stiffness and strength are also investigated. Even though the SCP-inserted clay specimens show stronger and stiffer behaviors than clay-only specimens, the effects vary on strength, stiffness, and volume change with regard to the applied replacement ratios.  相似文献